Related
Reason for this guide:
I have tried to go back to RUU and doing this with the RUU applications didn't work, the installation always failed. Because of that I was a bit afraid never to be able to get back to stock / RUU again
steps I did - i'm not sure if step 2 and 3 are necessary, but for me it worked like this
!!!DO NOT RELOCK the bootloader before Step 4 - this will brick your phone!!!
1. download RUU for your device here (check your radio at top the bootloader menu)
2. extract the RUU rom from RUU application
start the ruu application, even if it fails. also start the flashing process, nothing will happen here. search for the ruu logs, for me at c:\ruu_log. in the log (for me in line 191) is the path to the rom.zip that should get flashed. something in temp folder... for me the line looks like this:
"<T093343><DEBUG><CMD>fastboot -s HT1BMVMXYZ flash zip C:\users\raangu\AppData\Local\Temp\{1235}\{12345}\rom.zip</CMD></DEBUG></T093343>"
3. flash the needed images
in the rom.zip you will find a boot_signed.img, a system.img and a recovery_signed.img. flash all these images with fastboot.
In command line:
fastboot flash system system.img
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img
4. relock the bootloader
In command line:
fastboot oem lock
5. install with RUU application
now run the RUU application again and follow the instructions.
You are back on RUU now!
Thankyou
"3. flash the needed images
in the rom.zip you will find a boot_signed.img, a system.img and a recovery_signed.img. flash all these images with fastboot.
In command line:
fastboot flash system system.img
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img"
can u explain better this part...?? what does it mean "flash all these images with fastboot..??
P.S: i don't have any ROM.ZP file in my local\temp\ directory......only an empty directory....
What is your DeviceID?
I've the vodafone brand and the DevideID is "VODAP034".
I tried this guide to change ID but not work:
htcsensationforum.com/htc-sensation-rooting/general-changing-cid/
Any ideas?
THX Jaggy and Raangu
Thank you Raangu and jaggyjags for doing awesome job here.
I've questions regarding to RUU, if I want to flash RUU other then my device's Radio version or flash older RUU then my device's stock Rom,
will these brick my phone?
agv983 said:
"3. flash the needed images
in the rom.zip you will find a boot_signed.img, a system.img and a recovery_signed.img. flash all these images with fastboot.
In command line:
fastboot flash system system.img
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img"
can u explain better this part...?? what does it mean "flash all these images with fastboot..??
P.S: i don't have any ROM.ZP file in my local\temp\ directory......only an empty directory....
Click to expand...
Click to collapse
Hi agv983,
with "flash all these images with fastboot" I mean the lines below:
fastboot flash system system.img
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img
so you dont flash these things with cwm or something else. you do it with fastboot in command line.
did you take a look in the ruu_log? the path is written there.
PaXGeN said:
What is your DeviceID?
I've the vodafone brand and the DevideID is "VODAP034".
I tried this guide to change ID but not work:
htcsensationforum.com/htc-sensation-rooting/general-changing-cid/
Any ideas?
THX Jaggy and Raangu
Click to expand...
Click to collapse
Hi PaXGeN,
I'm not sure if this changes your Device ID
Maybe only for sensation?
mmtrt said:
Thank you Raangu and jaggyjags for doing awesome job here.
I've questions regarding to RUU, if I want to flash RUU other then my device's Radio version or flash older RUU then my device's stock Rom,
will these brick my phone?
Click to expand...
Click to collapse
Hi mmtrt,
I can't tell if it bricks your phone, but there are several RUUs for different Radio versions available. thought for each Radio there is also a RUU...
HI can u tell step by step how to install RUU i tried it but its failed
?????????
i did everything just the way you said but even after doing that i cant flash ma phone using RUU file "RUU_Pico_HTC_Europe_1.28.401.1_Radio_10.35d.80.09H_1.11.82.17_release_230964_signed" !!!!....
Ma bootloader details are :
"*** UNLOCKED ***
PICO PVT SHIP S-ON RL
HBOOT-1.03.0000
RADIO-1.11.82.17
Nov 29 2011,17:10:06 "
and yes i seriously wanna remove that "*** UNLOCKED ***" So that ma warranty doesnt go !!!!!! will this flashing remove that tooo??!!!!
And ma software no. is 1.31.720.3
can u post a link to RUU of above specification? !!
please reply soon!!!!
hussainali5005 said:
Hello there raangu,
i followed the steps in installing RUU , now i can not start my phone it is looping and i did everything and i can not get into recovery mode in my htc phone there is a phone icon and a red exclamation mark , please help me fix this i have no money to buy another phone please help me you are only expert in htc explorer and my only hope. please please
Click to expand...
Click to collapse
lol, dont worry, reflash the recovery as you did in the tutorial when rooting and install another rom
thanks raangu and jaggyjags for all the stuff u have been providing.....just wanted to ask some questions...
1)can i flash recovery_signed.img of other software version to my current version i.e. can i flash 1.10.720.2 recovery_signed.img to 1.13.720.3 to remove the chinese custom recovery which i have flashed....(i have not flashed any custom rom)
2)and when flashing as per the 1st post do i have to do a factory reset before the process to write the image file...please help....
3) does nandroid backup include the stock recovery file....please reply
thank you
@raangu i found the version of ruu required for me,i got the info in settings-->about phone-->software version.
please help....thank you...
I'm getting the log file but there isn't any zip.rom in the log file.
Any ideas?
cined said:
I'm getting the log file but there isn't any zip.rom in the log file.
Any ideas?
Click to expand...
Click to collapse
try this instead
1. Download the RUU.
2. Open the RUU exe file, and proceed until you get to the page which says 'View Readme'. At that point, stop.
3. Go to your TEMP folder (on Windows 7 it'll be something like : C:\Users\USERNAME\AppData\Local\Temp
4. Look for folders that have lots of characters in that format: "{XXXXXX-XXXX-XXXX-XXXX-XXXXXXXX}". One of the folders will contain two files, and another folder with the same "{XXXXXX-XXXX-XXXX-XXXX-XXXXXXXX}" format. Open that folder.
5. In there, you will see either rom.zip or firmware.zip (depending on the device).
It says when trying to flash system.img,, date length too large
help me please
help me please
i don't understand this step
---- 2. extract the RUU rom from RUU application----
where i can find the RUU application??
PS: my phone is: HTC EXPLORER with jaggyrom, and i'd return to my stock rom.
i've downloaded my stock rom following this discussion--- http://forum.xda-developers.com/showthread.php?t=1569430
because your download link page wasn't running to me, but i think that roms are the same.
thnx
A total successful unrooting and reverting to stock
Warning dont flash any other rom before this step in order to retain factory status you have to maintain the default rom on which rooting was done
for those who want to revert to stock from jaggy or any other make a clockwork backup of your stock rom even if it is rooted
Step 1 : if you have messed up in previous posts by our friend dont be alarmed
make sure you have clockwork mod of your original rom backed up in sd card or in the computer copied from sd card
to do this go to the recovery option choose backup and restore in this select restore and select the backup you did with your stock rom
Step 2 : download these files ( also noted in my system the android sdk was in c drive root as c:\Android else make a fresh installation of the android sdk ) GIVEN BELOW AT THE END OF POST
Step 3 : on c drive paste these files in c:\Android ( if file not there in pc install sdk in this folder ) now open cmd from start menu
Step 4 : Execute commands
cd c:\Android
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img
(fastbooting system .img mentioned in previous post is not required as it will conflict with the hboot and it too tiresome to get the sock back)
Final step : now with the stock boot and recovery of htc default signed just restart your cell phone and got to settings > storage >factory reset
Ta da your phone is unrooted now for the grand finale lock the HBOOT
execute command : fastboot oem lock
to lock the boot loader
now it will show relocked now at this stage if you got your factory default ruu matched with the software version of your phone in my case it was
V1.31.728.1
then flash that ruu and vola your phone is crystal clear no hboot relocked or no rooting ever shown.
Try it and press thanks if liked
I dont get this, sorry...
I have stock scandinavian rom on my Explorer, and I want to flash an european rom instead.
Ive go the European RUU, but for gods sake I cant get it installed...
I dont want to brick my girlfriends phone, its 1 month old, and I dont want to fiddle with too much.
Is there any way to simply flash the RUU with the bootloader?
prateek.maac said:
Warning dont flash any other rom before this step in order to retain factory status you have to maintain the default rom on which rooting was done
for those who want to revert to stock from jaggy or any other make a clockwork backup of your stock rom even if it is rooted
Step 1 : if you have messed up in previous posts by our friend dont be alarmed
make sure you have clockwork mod of your original rom backed up in sd card or in the computer copied from sd card
to do this go to the recovery option choose backup and restore in this select restore and select the backup you did with your stock rom
Step 2 : download these files ( also noted in my system the android sdk was in c drive root as c:\Android else make a fresh installation of the android sdk ) GIVEN BELOW AT THE END OF POST
Step 3 : on c drive paste these files in c:\Android ( if file not there in pc install sdk in this folder ) now open cmd from start menu
Step 4 : Execute commands
cd c:\Android
fastboot flash boot boot_signed.img
fastboot flash recovery recovery_signed.img
(fastbooting system .img mentioned in previous post is not required as it will conflict with the hboot and it too tiresome to get the sock back)
Final step : now with the stock boot and recovery of htc default signed just restart your cell phone and got to settings > storage >factory reset
Ta da your phone is unrooted now for the grand finale lock the HBOOT
execute command : fastboot oem lock
to lock the boot loader
now it will show relocked now at this stage if you got your factory default ruu matched with the software version of your phone in my case it was
V1.31.728.1
then flash that ruu and vola your phone is crystal clear no hboot relocked or no rooting ever shown.
Try it and press thanks if liked
Click to expand...
Click to collapse
could you direct me to the link. where you found the ruu v1.31.728.1
I'm searching for the original RUU for my branded HTC One S 1.53.169.3 with CID VODAP120. I semi-bricked it while trying to flash the vanilla modaco rom. I had a nandroid backup of my stock rom and reverted to stock. when the restore process was done i got a bootloop and couldn't mount /sdcard/ from cwm anymore. so i restored stock recovery over fastboot and relocked the bootloader and tryed to restore my device with the 1.53.401.2 unbranded RUU by editing the android_info.txt and adding my cid in the rom.zip but i am still getting error 132 (signature error) because there still isn't a possibility to s-off the one s. My only hope is to find the original branded One S RUU 1.53.169.3. I would be pleased if someone could upload the RUU. Thanks
its not possible to mount the sdcard in cwm. boot your phone in to recovery and
adb push yourrom.zip /sdcard
Try this rom: http://files.virtuousrom.com/ville/roms/Virtuous_Ville_v.1.4.0_PROPER.zip
maybe this will fix your bootloop. if not try this:
Start the RUU
- in windows type %TEMP%
- search for rom.zip
- extract it
- cmd to this folder
- fastboot flash boot boot_signed.img
restart your phone. Maybe this helps!
i'm always getting device not found in adb shell. the boot_signed.img is already on the device. still stuck in boot
install the usb driver from android sdk
my htc drivers are installed and i've tried now a coupe of times to install the android usb drivers and i am always getting drivers not match message
also having red triangle in recovery. should i try to unlock bootloader and install cwm recovery and try adb again?
i bricked my htc X920e chinese version and i cant flash the latest RUU(image version 1.08.1400.6 ) since my phone image verion is 1.10.1400.1.
Can anyone tell me how to return to stock without latest RUU? since the brick i cant use the phone anymore , everytime i boot it up the screen display the HTC logo, goes white and then nothing...ＨＥＬＰ！！！
Please excuse my poor English．
bootloader infos：
DELUXE_U PVT SHIP S-ON
HBOOT-1.40.0000
RADIO-3A.22.306.10
OpenDSP-v5.120.274.1207
eMMC-boot
Re: [Q] HELP!!!how to ruturn to stock without latest RUU？
Have you tried wipe the cache from the recovery?
Sent from my HTC Butterfly
HELP!!!how to return to stock without latest RUU？
gbear said:
Have you tried wipe the cache from the recovery?
Sent from my HTC Butterfly
Click to expand...
Click to collapse
yes i did, but that didnt change anything
Try to find the executive file of ROM (.exe) and run it to reflash your phone from PC. That the way I did with my One X, hope that will help. Remember to relock the phone before flashing.
HELP!!!how to return to stock without latest RUU？
snipervn said:
Try to find the executive file of ROM (.exe) and run it to reflash your phone from PC. That the way I did with my One X, hope that will help. Remember to relock the phone before flashing.
Click to expand...
Click to collapse
i tried it but it failed because of image version of the latest Rom Update Utility( 1.08.1400.6 ) which is lower than my phone image version(1.10.1400.1.).
maybe you can go to htc service center and get them flash it back for you, they won't charge you anything (in my country), just say you don't know what happen...
Re :HELP!!!how to return to stock without latest RUU？
franzkila said:
i bricked my htc X920e chinese version and i cant flash the latest RUU(image version 1.08.1400.6 ) since my phone image verion is 1.10.1400.1.
Can anyone tell me how to return to stock without latest RUU? since the brick i cant use the phone anymore , everytime i boot it up the screen display the HTC logo, goes white and then nothing...ＨＥＬＰ！！！
Please excuse my poor English．
bootloader infos：
DELUXE_U PVT SHIP S-ON
HBOOT-1.40.0000
RADIO-3A.22.306.10
OpenDSP-v5.120.274.1207
eMMC-boot
Click to expand...
Click to collapse
Same Problem Hare.
is there any solution you find out.
please share.................!
HELP!!!how to return to stock without latest RUU？
SheikhSaqib said:
Same Problem Hare.
is there any solution you find out.
please share.................!
Click to expand...
Click to collapse
i still didnt find any solution yet...
If you have the RUU.exe file (as you said), lets try :
- run the exe file.
- when the installation preperation process completed , keep the process wait there and find the temperature rom extracted somewhere in PC.
- copy the rom to other place.
- find the boot.img and recovery.img in firmware.zip file (in the zip rom that you just have)
- unlock your phone.
- press volume down + power to go to bootloader.
- connect phone to PC and use fastboot to flash boot.img file.
- continue to flash recovery.img
- relock the phone by fastboot oem lock
- flash rom.zip by fastboot.
Hope that could help. That is the way I did for my friend One X+.
snipervn said:
If you have the RUU.exe file (as you said), lets try :
- run the exe file.
- when the installation preperation process completed , keep the process wait there and find the temperature rom extracted somewhere in PC.
- copy the rom to other place.
- find the boot.img and recovery.img in firmware.zip file (in the zip rom that you just have)
- unlock your phone.
- press volume down + power to go to bootloader.
- connect phone to PC and use fastboot to flash boot.img file.
- continue to flash recovery.img
- relock the phone by fastboot oem lock
- flash rom.zip by fastboot.
Hope that could help. That is the way I did for my friend One X+.
Click to expand...
Click to collapse
thx but that method didnt work...
franzkila said:
thx but that method didnt work...
Click to expand...
Click to collapse
So, the problem should be HBoot version, I guested. You may try to search and find if there are any solutions to re-install Hboot, otherwise, send your phone to HTC service center is last solution you should do.
Unbrick htc x920e
hi everyone i finally succeed to unbrick my htc butterfly. Thx for all the support u guys brought to this post.
This is how i did it:
1. boot in recovery mode and wipe eveything (factory reset, cache, dalvik-cache and system)
2. Flash any x920e custom rom :
In my case i couldnt mount the sdcard from the recovery so i select the option "Install zip from sideload " instead of "Install zip from sdcard" abd and i used ADB Toolkit GUI Shell (http://forum.xda-developers.com/showthread.php?t=1800335) to flash the custom rom.
Once in sideload mode u can use this command to flash the custom rom:
Code:
adb sideload rom_name.zip
After the phone reboot it was still stucked at the boot logo so i proceeded to step 3
3.Reboot in bootloader and put the phone in "fastboot USB" mode
4. Open the custom rom zip file and extract the "boot.img"
5. Use the command shell to flash the extracted boot.img using this command:
Code:
fastboot flash boot boot.img
6.Reboot
Update/Solved:
Currently the only way for people who deleted their OS completely in this phone model X00HD/ZC520KL is to restore the official firmware.
You can ask for a backup recovery folder in XDA Forums ( https://forum.xda-developers.com/zen...help?nocache=1) if you do not have made a backup with people who have the same phone model. You must have TWRP previously installed and bootloader unlocked. Flashing the official firmware via .zip files is not working with twrp, you must restore the folder. After having the files needed, your recovery folder will not appear on the RESTORE section so follow this simple tutorial to make it appear there (https://youtu.be/trlG3ZxwQxI)
This method will bring your phone back to life if you're stuck in TWRP Recovery Mode with "No OS installed". This method is working and it's the only way for you to use your phone again until developers create custom ROM's for this model.
DEVICE INFO:
ASUS ZENFONE 4 MAX ZC520KL [X00HD]
Please, can anyone reply? I need an answer. Thanks for your time.
https://forum.xda-developers.com/zenfone-4-max/how-to/zenfone-4-max-rom-twrp-flash-twrp-t3776287
jenere said:
https://forum.xda-developers.com/zenfone-4-max/how-to/zenfone-4-max-rom-twrp-flash-twrp-t3776287
Click to expand...
Click to collapse
This ROM is for is for the Asus model of ZenFone 4 Max ZC554KL [X00ID]. My device is the same but the model is ZenFone 4 Max ZC520KL [X00HD]. Will it work also on my device? :fingers-crossed:
jenere said:
https://forum.xda-developers.com/zenfone-4-max/how-to/zenfone-4-max-rom-twrp-flash-twrp-t3776287
Click to expand...
Click to collapse
Hello, I tried your solution. It did not work. I keep getting Error Number 7 when flashing the ROM. Plus I also tried to delete the assert line in the uptader-script of the ROM you gave me the link after learning from a tutorial how to solve Error Number 7 and after that I got another error: Invalid Zip Format. I don't know what do to more, is this ROM link really compatible with my device? I need urgent help.
ANDROIDMASTER67 said:
Hello, I tried your solution. It did not work. I keep getting Error Number 7 when flashing the ROM. Plus I also tried to delete the assert line in the uptader-script of the ROM you gave me the link after learning from a tutorial how to solve Error Number 7 and after that I got another error: Invalid Zip Format. I don't know what do to more, is this ROM link really compatible with my device? I need urgent help.
Click to expand...
Click to collapse
did you try the stock firmware in the official site for asus? i think installing the the official stock firmware will solve your problem just chose there the proper firmware for.. can i ask if already unlock your bootloader or already change you stock twrp?
jenere said:
did you try the stock firmware in the official site for asus? i think installing the the official stock firmware will solve your problem just chose there the proper firmware for.. can i ask if already unlock your bootloader or already change you stock twrp?
Click to expand...
Click to collapse
Thanks for the attention. I already tried tons of ROM's including the official one for this phone. I keep getting Error Number 7. Sometimes when I force an installation editing the uptader-script file it seems everything is working fine, but at the end of the ROM flash process the phone reboots and goes back to TWRP like everything had never happened. I have never seen a successful feedback, just the "Failed" message or a unexpected reboot that goes back to TWRP.
I don't know what do you mean with unlocking bootloader as I have no ROM installed and always I turn ON my phone I go to TWRP automatically. My TWRP version is 3.1.1.
ANDROIDMASTER67 said:
Hello, I tried your solution. It did not work. I keep getting Error Number 7 when flashing the ROM. Plus I also tried to delete the assert line in the uptader-script of the ROM you gave me the link after learning from a tutorial how to solve Error Number 7 and after that I got another error: Invalid Zip Format. I don't know what do to more, is this ROM link really compatible with my device? I need urgent help.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2302599 did you try this?
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
there's alot of tutorial video in google and youtube showing how to fix error code 7 when flashing rom
jenere said:
https://forum.xda-developers.com/showthread.php?t=2302599 did you try this?
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
there's alot of tutorial video in google and youtube showing how to fix error code 7 when flashing rom
Click to expand...
Click to collapse
Not working, as I said before, I've already tried to solve this Error. Either 3 things happen: the installation seems to be running good but at some point the device automatically reboots to it's original condition of TWRP (Liniage OS flash and after editing the file to solve Error Number 7 + I get a message saying "Invalid zip format" (Official Asus Firmware flash after editing the file to solve Error Number 7) + I get Error Number 7.
Backup ROM
Hi, I have the same model and I have TWRP as well. I think I can make backup of my ROM an upload it so you can install it on your phone, would that work for you?
pantarz said:
Hi, I have the same model and I have TWRP as well. I think I can make backup of my ROM an upload it so you can install it on your phone, would that work for you?
Click to expand...
Click to collapse
Hello @pantarz, yes, give me your backup ROM you have in your phone, it should work on mine. I'm really thankful to see people like this these days. Just need the .zip file for the ROM. Thanks in advance.
Currently the only way for people who deleted their OS completely in this phone model X00HD/ZC520KL is to restore the official firmware.
You can ask for a backup recovery folder in XDA Forums ( https://forum.xda-developers.com/zenfone-4-max/help?nocache=1) if you do not have made a backup. You must have TWRP previously installed and bootloader unlocked. Flashing the official firmware via .zip files is not working with twrp, you must restore the folder. Your recovery folder will not appear on the RESTORE section so follow this simple tutorial to make it appear there (https://youtu.be/trlG3ZxwQxI)
This method will bring your phone back to live if you're stuck in TWRP Recovery Mode with "No OS installed". This method is working and it's the only way for you to use your phone again until developers create custom ROM's for this model.
Hi @ANDROIDMASTER67, @pantarz I also break my phone ZC520KL ( X00HD ). It shows "no os installed" and "error 7" when I try to install a ROM.
Can you please help me fix my phone? If there is a backup that I can get please let me know.
Many thanks in advance.
I've managed to fix it by doing the following:
Copy the original recovery from a firmware package.
I could find one in the file https://androidfilehost.com/?fid=11050483647474829889, location /Asus_Zenfone_4_Max_ZC520KL_20171225/Firmware/recovery.img
Load default recovery
fastboot flash recovery recovery/original-recovery.img
Restart to bootloader
fastboot reboot bootloader
Load flashboot mode
choose the option "update using adb"
ensure that adb can locate devices with
adb devices
load firmware with
adb sideload UL-ASUS_X00HD-WW-14.2016.1805.374-user.zip ( try download from: https://www.beritahuaja.com/2018/11/download-stock-rom-asus-zenfone-4-max-zc520kl.html )
Easy way with only fastboot
1. Get adb and fastboot drivers
2. go to this page h ttps://addrom.com/raw-rom-for-asus-zenfone-4-max-zc520kl/ Dowload the original firware
3. Extract the files inside the your disc C:Adb
4. Go to your celphone and enter in fastboot mode... then conect the celphone to your computer ... then use cmd " fastboot flash recovery recovery.img" .. this is for restore the original recovery if you have twrp.. if you dont have it , its no neccesary ..
5. in fastboot mode , go to Inside the firware search flashall_AFT.bat , double clik , wait until finish
6. go to recovery mode wipe/factory reset and tadaaaa! Your Os is restore again :bueno:
asus-zenfone-4-max-zc520kl
Luisanchez70 said:
1. Get adb and fastboot drivers
2. go to this page h ttps://addrom.com/raw-rom-for-asus-zenfone-4-max-zc520kl/ Dowload the original firware
3. Extract the files inside the your disc C:Adb
4. Go to your celphone and enter in fastboot mode... then conect the celphone to your computer ... then use cmd " fastboot flash recovery recovery.img" .. this is for restore the original recovery if you have twrp.. if you dont have it , its no neccesary ..
5. in fastboot mode , go to Inside the firware search flashall_AFT.bat , double clik , wait until finish
6. go to recovery mode wipe/factory reset and tadaaaa! Your Os is restore again :bueno:
Click to expand...
Click to collapse
i have unlock bootloader after flash this firmware relock it agin ?
Amadu said:
I've managed to fix it by doing the following:
Copy the original recovery from a firmware package.
I could find one in the file https://androidfilehost.com/?fid=11050483647474829889, location /Asus_Zenfone_4_Max_ZC520KL_20171225/Firmware/recovery.img
Load default recovery
fastboot flash recovery recovery/original-recovery.img
Restart to bootloader
fastboot reboot bootloader
Load flashboot mode
choose the option "update using adb"
ensure that adb can locate devices with
adb devices
load firmware with
adb sideload UL-ASUS_X00HD-WW-14.2016.1805.374-user.zip ( try download from: https://www.beritahuaja.com/2018/11/download-stock-rom-asus-zenfone-4-max-zc520kl.html )
Click to expand...
Click to collapse
It works. It really works. You have saved my Asus X00HD. Thank you.
Luisanchez70 said:
Easy way with only fastboot
1. Get adb and fastboot drivers
2. go to this page h ttps://addrom.com/raw-rom-for-asus-zenfone-4-max-zc520kl/ Dowload the original firware
3. Extract the files inside the your disc C:Adb
4. Go to your celphone and enter in fastboot mode... then conect the celphone to your computer ... then use cmd " fastboot flash recovery recovery.img" .. this is for restore the original recovery if you have twrp.. if you dont have it , its no neccesary ..
5. in fastboot mode , go to Inside the firware search flashall_AFT.bat , double clik , wait until finish
6. go to recovery mode wipe/factory reset and tadaaaa! Your Os is restore again :bueno:
Click to expand...
Click to collapse
you save me
THANK YOUUUU
So I was trying to install a custom ROM (first time ) did unlock my bootloader and when wiped using twrp and then rebooted to twrp for flashing the ROM it said that system has been destroyed when I tried to reboot to recovery then also it was of no use.I tried to flash fastboot roms via miflash tool. The new versions couldnt find scripts o don't know why so I tried the old ones but the flash got completed in 1 second so it was useless.further more I think that I have anti rollback v2 in my phone and that's why I'm not able to go anywhere..
Is there any fix please help
Try to manual flash using fastboot
Fastboot flash system system.img
Fastboot flash recovery recovery.img
Then flash EU rom
LovingDracula04 said:
So I was trying to install a custom ROM (first time ) did unlock my bootloader and when wiped using twrp and then rebooted to twrp for flashing the ROM it said that system has been destroyed when I tried to reboot to recovery then also it was of no use.I tried to flash fastboot roms via miflash tool. The new versions couldnt find scripts o don't know why so I tried the old ones but the flash got completed in 1 second so it was useless.further more I think that I have anti rollback v2 in my phone and that's why I'm not able to go anywhere..
Is there any fix please help
Click to expand...
Click to collapse
The same thing happened to me when I tried to install and use TWRP.
To fix this, I used the MiFlash tool and flashed the fastboot ROM which you can download from here.
LovingDracula04 said:
So I was trying to install a custom ROM (first time ) did unlock my bootloader and when wiped using twrp and then rebooted to twrp for flashing the ROM it said that system has been destroyed when I tried to reboot to recovery then also it was of no use.I tried to flash fastboot roms via miflash tool. The new versions couldnt find scripts o don't know why so I tried the old ones but the flash got completed in 1 second so it was useless.further more I think that I have anti rollback v2 in my phone and that's why I'm not able to go anywhere..
Is there any fix please help
Click to expand...
Click to collapse
I had the same issue, but my phone went to fastboot from there I flashed it, the process was simple :
1. Download the fastboot rom and extract it (I guess two times, the first extraction extracts a file, open that with some extraction tool and uzip again, there you will see the fw with certain folders and images etc ).
2. Download the adb/fastboot zip file I"ll attach that here, extract it to the same folder where your fw files are. (fw = firmware).
3. You will find 3 bat files, flash all, flash all and lock, flash except storage, choose flash all (execute it).
4. Once done, reboot to recovery (stock), do a data wipe again.
This worked for me, hope it does for you too.
try unlock bootloader via internet
format data once via twrp