I rooted this device to uninstall some system apps and i deleted something wrong...After that my phone started to crash:first when i turn on WI-FI my phone freeze,camera stopped working (no camera can be used now when i start),flashlight also and phone don't detect headphones.Tried factory reset,wipe data...No success.Than i tried to find factory android but also no success.I found some custom roms for my phone on Ru android site and tried to flash phone using guide found on one CZ site http: //androidforum.cz/ topic48780. html
I tried steps from guide and finished and now i got anoher problem I can't accsess recovery mode by holding power and volume+ (when i press it i see green lines and dead pixels on screen).
Anyone have solution how to at least get factory android system?
Sorry for bad English
Related
Hello.
I've got a5000 android. I succefully root it I swithced of the service "android" (bacause it has 0kb....i was such stupid with this) of after that some error came and tel. is stuck on the black screen after booting. I was able to get to the android system recorvery mode wipe dat/factory reset and wipe chache partition didn't helped and apply sdcard:update zip doesn't work i also get to factory mode where i flash cache didn't helped either i was trying to run rsd lite but it din't find tel. There should be no problem with drivers as i used super one click tool before black screen and it worked. Do you have some suggestion? Also I find on some seller that phone should be able to do hard reset but i don't now how to do it. I was trying some usuall combination of keys that I found that should work on other phones (as the phone has no english manual) didn't find it.
Thanks for HELP!
hi guys,
first of all hi names troy i live in New Zealand and have an imported uk unlocked defy.. since i have updated to the official UK update through Motorola Software Update things were going great up until i installed a custom recovery (phone was rooted properly) .. i tried booting into it with the volume rocker down and got the android ! sign, tried to click all over screen with no luck so i removed battery and put it back in, then all i got was the Motorola splash screen turning off and on, so basically bricked right? then i began to try unbricking with RSD Light which fixed it but now the phones acting all strange like it cant download from the android market etc.. so what i want to do is do i complete factory reset, so i can start over again and learn from my mistakes, BUT it wont let me factory reset at all i tried the factory data reset through the privacy menu but when it gets to the erase everything button i push it and nothing happens so i tried the hard reset holding the vol rocker down, and i get the android ! sign and tapping anywhere on the screen does nothing so i have to remove battery and restart. could somebody please assist me? sounds like i've screwed up the recovery system, is there a way to install the factory original one?
thanks in advance!
p.s even if theirs away to completely erase the entire flash and then reflash to factory (when i re-flash with RSD Light no matter what sbf i pick it seems to keep all settings as in i don't get the login to google, motoblur, splashes etc as if i just purchased it, there already logged in and running)
I bought my phone about 3 months ago (Gionee p5w) and i had no custom roms installed. Yesterday i saw that there is a system update available. I think i rooted my phone using king root(not sure of version). Update on my phone wouldnt install... so i factory reset without clearing the phone memory thats when problem arised, nothing was reset except the text size setting. So i thought of going into factory mode to reset my phone and started phone with vol up and power key pressed . Factory mode didnt show up and now i am stuck in a bootloop. It shows bootloader logo and restarts again and again. I cant even go to normal mode and start my phone. I remember booting into factory mode when i bought it. Please help me fix it
aayushprime said:
I bought my phone about 3 months ago (Gionee p5w) and i had no custom roms installed. Yesterday i saw that there is a system update available. I think i rooted my phone using king root(not sure of version). Update on my phone wouldnt install... so i factory reset without clearing the phone memory thats when problem arised, nothing was reset except the text size setting. So i thought of going into factory mode to reset my phone and started phone with vol up and power key pressed . Factory mode didnt show up and now i am stuck in a bootloop. It shows bootloader logo and restarts again and again. I cant even go to normal mode and start my phone. I remember booting into factory mode when i bought it. Please help me fix it
Click to expand...
Click to collapse
Hello & welcome to xda-assist,
first of, we don't provide technical support here our job is to direct you through the boards here on xda-developers.
When you root your phone system updates will cause serious problems if you don't unroot before and revert all changes on system partition. So bootloop was expected to happen.
Only cure for that would be to reflash your phone's firmware, to find A) the appropriate firmware for your phone model and B) lern how to flash on your phone I would suggest you to visit this forum:
http://forum.xda-developers.com/android/help
and
Do a basic Google search on "your phone model + firmware" and "how to flash stock rom on your phone model"
Good luck
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
******i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.***********
semavi said:
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.
Click to expand...
Click to collapse
I don't understand.
You're saying that you successfully flashed it with your firmware and it started working. Does this mean you don't have an issue now? Or is there still a problem?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
yea i couldnt even open up the download mode it was saying RUN RDX TOOL but i just ignored whatever it says and tried to install it with odin till it succeeds after a few tries it just completed the installation and simply started to running.
Hello everyone, I have lots of issues with this tablet since I bought it. It works painfully slow, yet resetting it doesn't change anything, still the same problem. I also tried to root it via Kingroot and it werk, however it took me lot of time due to the system being unresponsive / unstable and almost useless. It comes with android 4.0.3 and I also tried looking up for any possibilites to reinstall the firmware since I'm extremely sure it could be caused from the firmware it also got installed from the factory. I also tried searching for custom roms and other ways around for TWRP or any custom recovery, but no result. I also tried up with the Flashify app to try extracting / backing up / dumping the recovery and the kernel but the app freezes up. I also tried a possibility to update the firmware from their official page, hence it failed to do so since it gives an error in their flashing software that dosen't tell me nor it logs it what it could be caused up from the connecting part.
primux.es/producto/tablets/tablet-primux-siroco-2-101/189
(not sure if anyone understands spanish thought but I can translate if needed)
This is the page from where I tried to download and install their software and their firmware down below on the page. primuxcomputers.es/primux/siroco2upgrade.pdf
There are the instructions where I tried to follow but at the "Imagen 9: Icono" part got me stuck in there. It requests me to insert the cable in the tablet holding the "Home" button and while holding it, plugging in the USB cable throught PC, and tap quickly the "Power" button 3 times. However it gives me a red X icon and yet nothing shows up in the devices: No ID, no other kind of detection no logs no nothing. After it showed up the X on the status, it disconnects itself and it changes to ready / green icon and plugs itself in again but nothing really happens to detect it again thought.
I also tried to boot in recovery mode but nothing happens menawhile Flashify keeps on the rebooting in recovery mode in loop doing nothing else... I'm seriously in pain with this tablet. And if you ask me to return it, not gonna even bother doing that..
I seriously hope any answer very soon and don't get dissapointed by the ignorance of this topic..