Hi guys,
I bought this miniPC that dual boots Windows 10 and Android (kitkat). The problem is, I've got this age old cyberlink remote that works with an IR usb receiver and I've always used it with xbmc/kodi on all my devices including PC, Android boxes and Raspberry Pi.
On this Cenovo MiniPC it's working fine under the Windows OS, but does absolutely nothing under Android. I'm guessing it's missing the IR driver or something..
Is there a way to add support or some driver for it?
Thanks
Related
Hi,
Has anyone had any luck in making an ATSC (HD and SD over Antenna) work with android platform? My problem arises from work I am doing on an android based Set Top Box, and i would love to be able to hook up my USB ATSC reciever to my android box and be able to view/record over the air transmissions.
Help!!!
Hopefully someone has had this issue before.
thanks
Evan
[email protected]
Hi,
I'm about to buy the ODROID-X from hardkernel.com which will run Android 4.0.
Now I'm searching for a Touchscreen for the device and I'd like to connect it via USB.
Is this possible with android? I guess I do need a specific driver for that, right?
I found a touchscreen with an Ideacom MODEL UTS6680 chip and there are also
drivers for Linux.
Is there a way to adapt them to Android?
Does anybody know another touchscreen that runs on Android?
Thanks!
Hans
Hello there,
I have succesivelly set cups on my raspberry pi, i can use the usb samsung printer attached to the raspberry pi over ethernet with other windows computers.
Althrough this printer cant be found using my samsung s3. Is there a way i can use the printer from android phone over wifi?
Any help would be aprichiated.
Hello . First sorry for my bad english .
Im having problems making USB touchscreen work on android 9. I get this device for Car multimedia install and i got USB touchscreen of ILITEK looks similar to this one https://www.aliexpress.com/item/330...earchweb0_0,searchweb201602_,searchweb201603_
The problem is that i connect usb to TVbox and it starts act like mouse not like touchscreen.
I have tried with multitouch module but it appears to work up to android 7
I have readed maybe 3 weeks almost lost all my info from pc to instal linux to compile new kernel for hid-multitouch enable in kernel
I have tried to unbind it with commands from terminal
I have tried to make idc file for specific VIDID
I have tried to ask manufacter of TVBOx to correct this issue for me . They told me that want to buy 10 000 devices to get source code for device or send them touchscreen in china.
And from maybe 2 monts im stuck and im planing to get new TVbox that is described in manuals for making car multimedia work like these steps :
How To Add Touch Screen To Android TV Box | Techs11
www.dognmonkey.com
The usb pid and vid are 222a 0001 i have get it from lsusb command in terminal
Screen works well on Windows 7 32bit
like every time when make topic i solve it with simple solution. It was no .idc file in system/user/idc/ everything working now
Hi! I'm trying to connect a USB touchscreen to a Chromecast with Google TV, which is actually an Android 10 TV box. However, I'm having issues to make it work. How did you manage to make yours work?
Hey guys
I have transpeed 6k and when i start it its saying boot for 2 - 3 minutes and after that it showing the clock. Nothing appears on the tv... What should I do?
Tnx a lot
Hi Guys,
My car manufacturer only installed an application called carbitlink in the middle console, which can be used to mirror your phone to the car screen.
I wanted to use the raspberry pi or any other sbc (single board computer) inside the car to act as a phone that the middle console can mirror it by the app carbitlink.
I could access the console system (it uses some custom modified version of android) but this will void car warranty.
So the only solution is either mirror the phone or uses something to act as a phone (in this case raspberry pi, odroid c4... Etc).
The problem is that I installed different versions of android on a raspberry pi but the car console doesn't detect it at all when connected to it.
The car console uses USB A to connect to a phone to be mirrored. I have different phones that works normally when connecting to car console the carbitlink app works fine (installed on the phone, and on car by the manufacturer).
What do you think is the problem? That the Pi 4 doesn't have OTG? (I know the otg are built in the power usb c port, but is it an otg case?)
Also if I purchased odroid c4 for example tgat has a separate micro USB with otg feature, will it work? (since it have an otg micro usb as I read)
My car is having a middle screen with built-in some custom made android system that has some apps for the car to work and they added an application called carbitlink which is used basically for mirroring a phone (Android or iPhone) to the car screen.
I wanted to use raspberry pi 4 to act as a phone and be mirrored to the car by installing the application carbitlink on raspberry pi 4 (usually the application needs to be installed on the phone for mirroring to the car).
I installed two of Android builds (13 and lineage 12), but the car screen system does not detect raspberry pi 4 as it is not there at all.
Car detect any phone with application carbitlink installed just by connecting the USB from the car to the phone but not to raspberry pi.
I read a lot about OTG and I am not sure if this is the case?
USB C on the pi should work as otg right?
Car having USB A
I connected the car USB A to raspberry pi 4 USB C
It gives enough power to the pi to startup and run but carbitlink is not detected by the car...
Any ideas?
Will odroid c4 with otg works?
**update:
I successfully mirrored the odroid but I tried only lineage os on that odroid and it have some bugs...
However the touch not working effectively still
Needs some modifications but I am sure all of it will be software issues...
Any nice ideas is appreciated