Related
Guys really need some help.
Bought an unlocked Razr HD from the web, and ungraded via OTA from 4.0.4 to 4.1.2. Then I rooted using dan's method, ran the script, phone was rooted. Then i decided to install TWRP, same way, in fastboot mode, ran the cmd 'fastboot flash recovery twrp-2.5.0.0-recovery-vanquish.img' then rebooted, but what essentially happened after, i was never able to boot the phone in recovery and every single time i ended up with fastboot reason" flash failure.
Then i was able to recovery from falsh failure by running 'empty_radio.img', after rebooting, the phone started up normally, but stock recovery was still corrupt, every single time i used to get the 'red triangle dead andriod', so booted back into fastboot, performed a clean wipe with fastboot -w and booted back normally, and flash failure was gone, and i was was able to reboot the phone normally.
Then i decided to unlock the bootloader, was was successful using Dan's method; my goal was to install 4.2 from recovery. Then i installed DroidUtility and decided to perform an clean install wiping all data. The problem was at every step i got the FAILED (remote failure) line, soon after phone got stuck with fastboot reason: 'Sticky bit fastboot'.....every single time i reboot phone gets stuck in the initial screen ' WARNING BOOTLOADER UNLOCKED' and thats it....i can't do anything...stuck....screen stays on for 10mins, then reboots back to this screen and keeps on looping.
Please help guys!! i hope i haven't bricked the phone.
eomahos said:
Guys really need some help.
Bought an unlocked Razr HD from the web, and ungraded via OTA from 4.0.4 to 4.1.2. Then I rooted using dan's method, ran the script, phone was rooted. Then i decided to install TWRP, same way, in fastboot mode, ran the cmd 'fastboot flash recovery twrp-2.5.0.0-recovery-vanquish.img' then rebooted, but what essentially happened after, i was never able to boot the phone in recovery and every single time i ended up with fastboot reason" flash failure.
Then i was able to recovery from falsh failure by running 'empty_radio.img', after rebooting, the phone started up normally, but stock recovery was still corrupt, every single time i used to get the 'red triangle dead andriod', so booted back into fastboot, performed a clean wipe with fastboot -w and booted back normally, and flash failure was gone, and i was was able to reboot the phone normally.
Then i decided to unlock the bootloader, was was successful using Dan's method; my goal was to install 4.2 from recovery. Then i installed DroidUtility and decided to perform an clean install wiping all data. The problem was at every step i got the FAILED (remote failure) line, soon after phone got stuck with fastboot reason: 'Sticky bit fastboot'.....every single time i reboot phone gets stuck in the initial screen ' WARNING BOOTLOADER UNLOCKED' and thats it....i can't do anything...stuck....screen stays on for 10mins, then reboots back to this screen and keeps on looping.
Please help guys!! i hope i haven't bricked the phone.
Click to expand...
Click to collapse
Seeing how the phone is now updated to latest ota try Matt's Utility for the Droid RAZR HD i used this to get my phone is working condition then i did some adb and fastboot commands using some files to get rid of the sticky bit fastboot.
Heres a link to the RAZR HD utility: http://forum.xda-developers.com/showthread.php?t=2239425
Heres a link to get rid of the sticky bit fastboot menu (if you do end up getting this menu):http://forum.xda-developers.com/showthread.php?t=2260105
Hope this helps and good luck bro.
P.S if you did brick your phone its not the end of the world. the epic devs of XDA figured out how to fix problems like this. I bricked my phone by installing beats audio app ( worst mistake ever) came here for help and next thing i know my phone up and running like a charm ^^
well i did try matt's droid utility, and that's what put me in this state in the first place, since my stock recovery was corrupt, i decided to just clean install JB from Matt, but all the steps failed, it said remote failure at every step....and that was it! fastboot reason: flash failure,if i hold +/- and power, the phones boots up and gets stuck on the first screen..in this case since the bootloader is unlocked, it gets stuck on the WARNING message.
Also did try to fastboot with these commands:
adb reboot bootloader
fastboot oem fb_mode_set
fastboot oem fb_mode_clear
fastboot erase userdata
fastboot erase cache
fastboot reboot
same, gets stuck on WARNING screen after reboot.
eomahos said:
well i did try matt's droid utility, and that's what put me in this state in the first place, since my stock recovery was corrupt, i decided to just clean install JB from Matt, but all the steps failed, it said remote failure at every step....and that was it! fastboot reason: flash failure,if i hold +/- and power, the phones boots up and gets stuck on the first screen..in this case since the bootloader is unlocked, it gets stuck on the WARNING message.
Also did try to fastboot with these commands:
adb reboot bootloader
fastboot oem fb_mode_set
fastboot oem fb_mode_clear
fastboot erase userdata
fastboot erase cache
fastboot reboot
same, gets stuck on WARNING screen after reboot.
Click to expand...
Click to collapse
Have you tried flashing the phone with rsd lite?
Oh boy!! i made a major error, i someone didn't read the version...and used matt's utility xt912 on my xt925. is there a link for xt925? what can i do now? Can i use matt's xt926 on my 925?
eomahos said:
Oh boy!! i made a major error, i someone didn't read the version...and used matt's utility xt912 on my xt925. is there a link for xt925? what can i do now? Can i use matt's xt926 on my 925?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2241788 from what i heard it works both on xt925 and xt926
oh wow....it did work. But now the problem is not sure if it locked the phone or not, but it's not recognizing my SIM. it said stock rom for both xt925/926. it seems that this is a verizom ROM, and on the device info it's listed at xt926. Not sure if that is the issue or not? can flashing the ROM lock the phone?
unfortunately, i have tried everything to install RSD, but it just wont install. Having a nightware, so all i need now is to install a stock JB ROM for xt925, but the recovery is corrupt, so need Matt's or MR. PARKINSON'S to flash a xt925 ROM. Can someone please help?
eomahos said:
unfortunately, i have tried everything to install RSD, but it just wont install. Having a nightware, so all i need now is to install a stock JB ROM for xt925, but the recovery is corrupt, so need Matt's or MR. PARKINSON'S to flash a xt925 ROM. Can someone please help?
Click to expand...
Click to collapse
Why dont you just flash twrp. Have it the same directory as the fastboot files from Hashcodes page on goo. Im. Cd to the directory with a command prompt and type faatboot flash recovery then the name of the file. Should overwrite your stock recovery and allow you to flash whatever you want.
Sent from my Transformer TF101 using xda premium
eomahos said:
unfortunately, i have tried everything to install RSD, but it just wont install. Having a nightware, so all i need now is to install a stock JB ROM for xt925, but the recovery is corrupt, so need Matt's or MR. PARKINSON'S to flash a xt925 ROM. Can someone please help?
Click to expand...
Click to collapse
I know you've stated that you can't get RSD to install, however if you can; perhaps borrow a friends computer to do it, then there's a variety of stock XT925 ROMs on this page http://sbf.droid-developers.org/vanquish_u/list.php
and instructions for flashing here http://www.andromods.com/tips-trick...-unroot-unbrick-droid-razr-maxx-hd-xt926.html which states its for the XT926 however I restored my 925 using my carrier's ROM from the first link and the tool and instructions on the second link. I only had one line with getvar in it to remove from the xml file. I've actually flashed both my carrier's ROM and then a generic one for my locale.
If you go this route, borrowing a friends computer, make sure you download the ROM from your carrier (assuming its there) with the higher version number or you'lle be attempting to flashing ICS and there's some post floating around that implies a downgrade from 4.1.2 to ICS causes problems.
The instructions look a little daunting but the xml files I saw, in both ROMs, were very short. Just be sure to use notpad when you edit. The other thing to be sure of, which isn't otherwise stated, is that RSDlite runs for a while even after the phone reboots. I made the mistake of pulling the cable when I got to the setup screen the first time I did it and thought it was a problem with the ROM or the flash of it. The reality, I think, after looking more carefully the second time, is that RSD is still running and doesn't say finished for a little bit after the boot and until I was still filling out the thing for the intial phone setup... Google acount, Google Plus, etc.
Link to a thread on the subject (also heavily 926 implied) http://forum.xda-developers.com/showthread.php?t=2211234
Since your'e unlocked you no longer need to use any exploit to gain root. Get a flashable supersu.zip on the phone, install a recovery and root you will have; just install the zip...
Have a full battery when starting the ROM flash.
thanks alot buddy, i'll start reading into it. So, i did finally manage to install TWRP, and did manage to flash the ROM with stock 4.2, tried both xt926/925, however, now the issue is i dont get any reception, nothing at all, everytime i search, it comes back with no network found. Can you please advise? i was able to bypass the corrupt recovery, install a clean 4.1.2 xt926 ROM, but i never got any reception, installed TWRP, then tried 4.2 ROMs. No, i get nothing...miss i mess up the radio?
eomahos said:
thanks alot buddy, i'll start reading into it. So, i did finally manage to install TWRP, and did manage to flash the ROM with stock 4.2, tried both xt926/925, however, now the issue is i dont get any reception, nothing at all, everytime i search, it comes back with no network found. Can you please advise? i was able to bypass the corrupt recovery, install a clean 4.1.2 xt926 ROM, but i never got any reception, installed TWRP, then tried 4.2 ROMs. No, i get nothing...miss i mess up the radio?
Click to expand...
Click to collapse
Hi, I tried replying to your PM however the server isn't reporting it sent or is having troubles sending or whatnot. Let me know if you got it or not.
In any case, of most relevance, who was your carrier when your phone did work? That is going to hopefully be the starting point, I believe.
...also, please quote my text if responding so that I get an email notification, otherwise I'll forget XDA exists for days at a time...
Hi together,
I've got a Motorola Photon Q 4g LTE mobile phone and this afternoon I wanted to install CyanogemMod, but whatever I do, I stuck with the following problem:
I can't install any other Custom Recovery. I tried ClockworkMod and OpenRecovery, but I always get the s**t Motorola Bootloader, when I start in Recovery Mode. The Bootloader of my Phone is unlocked via Motorola Website, as told in many other threads.
I know that the users arrrghhh, shabbypenguin and Skrilax_CZ are great experts with firmware and such things, but I'm not allowed to write in developer's forums because I'm new here.
Has anybody got an idea for me, how to geht the Custom Recovery to work?
Btw: I tried to root the phone as well, but that wasn't posible. May be things come together or depend on each other.
Thanks for your help!
When you flash recovery (IE run the fastboot command) is it successful?
With the phone in fastboot/bootloader mode, type "fastboot devices" in the command prompt (where you run the fastboot flash command) and what does it output?
Also, try this.
arrrghhh said:
When you flash recovery (IE run the fastboot command) is it successful?
Click to expand...
Click to collapse
When I flash recovery, I just flash the Motorola given Recovery by Motoroloa Bootloader. The Phone restarts, a logo with the Android Man is shown (stomach opend with some engeniering tools in it) and after about 5-7 Minuten, the system starts normally.
I also managed it to change the "Unlocked Message" into a Motorola Logo by using fastboot flash logo xxxx.bin and I nearly destroyed the flash by flashing an unlikely file. So the phone was shortly out of order because oder "flash failure" (fastboot mode). After that, I managed to flash the "boot.img" file of an CyanogenMod, so the flash was rebuilt and I could use the phone normally.
arrrghhh said:
With the phone in fastboot/bootloader mode, type "fastboot devices" in the command prompt (where you run the fastboot flash command) and what does it output?
Click to expand...
Click to collapse
It shows the connected devices by showing a 8 or 9 ditigt number. It's almost the same view like I connected the phone without fastboot and use "adb devices".
arrrghhh said:
Also, try this.
Click to expand...
Click to collapse
This one I didn't tried yet, because I was so dissappointed of the mismatch with ClockworkMod & Open Recovery. Do you think, that trying this one will help, after two others failed?!
Thanks for you notice and your time. That's very helpful!
You need to boot to recovery after flashing it. There's a shell script that is re-flashing stock recovery - the dead Android dude with tools sticking out of him is stock recovery....
arrrghhh said:
You need to boot to recovery after flashing it. There's a shell script that is re-flashing stock recovery - the dead Android dude with tools sticking out of him is stock recovery....
Click to expand...
Click to collapse
Ah ja, now I'm one step closer. I did not know, that the dead Android dude is the sign for stock recovery.
I'll give it this afternoon another try and will report. A bunch of thanks to you at this time!
Hi, it's me again. I managed now the reboot to recovery, by holding the volume up button while doing the "fastboot reboot"-command with the command box. That worked and I could start Photon Q Open Recovery 2.06.
Unfortunately, I did something wrong or so and now the script re-flashed stock recovery again. Nevertheless, I now know how to operate and will do the rest by my own (hopefully).
@arrrghhh: Thank you very much for your help!
So, I finally did everyhting the right way (now with ClockworkMod Recovery), because I now have CyanogenMod running on my Motorola Photon Q
:victory:
@arrrghhh: Thank you very very much!
Hello everyone. I am new around here and totally new with android devices. I got my tf300t, installed twrp and flashed to the newest android version. Then my dad suddendly pressed something like restore to the manufactory setting and after that it rebooted and just keep booting with teamwin logo. I can not access twrp recovery mod, it is just in boot loop. I managed to get adb to work, but no fastboot since it does not boot into recovery mode. When I am in adb I can browse the device but the adb reboot bootloader does not work at all. It just hangs there. I can not power off the device because it does not let me, I can not boot into recovery mode with powerbutton and volume down button. After a long power button press it only reboots. I even tried with hard reset button but still the same. Could You please help me somehow? I really need that device for school and I would like to get back into the stock android. Thank you so much for any help.
//edit : I also forget to mention, when I execute adb deviced it shows:
List of devices attached
0123456789ABCDEF recovery
Also the device is unlocked.
Did you tried: adb reboot recovery ?
Did you tried to flash recovery again?
Be sure to use the right recovery for your bootloader. Did you upgraded bootloader to latest ASUS one? One then you're able to flash current recoveries like TWRP like 2.8.5.0 oder 2.8.7.0.
Edit: Also take a look here -> http://droidmodderx.com/prime/?page_id=74
Hello sir. Thank you for answering. I tried adb reboot recovery and it just hangs to be executed... But the tablet is still flashing the teamwin logo. I have the same bootloop as the guy on youtube called Francis Domingo and video called Samsung s5 stuck at TWRP Recovery boot loop (unfortunately I can not add link here).
//edit: Thank you for the link. It look like I have to use option 1a. Is it safe to use that command and I will not make it even more bricked? Thank you so much
//edit2: Now I just realized how to turn off the device to stop from rebooting. I just long pressed power button and up volume button and after the screen went black I kept holding the up volume button. I didn't work with down volume button or if I stopped holding the up volume button after black screen it rebooted again.
//edit3 : Let's say if I get to the twrp mode with option 1a from the link, what do I have to do next to get back to the stock rom (I think it was something like 4.0.3) ? Thank you
What the guy does in 1a is wiping mmcblk0p3.
Afaik mmcblk0p3 is the staging partition. That would be my guess anyway if you had access to fastboot. Usally when you can't boot into recovery, something is wrong in staging. I got the same problem 2 days ago. In this case you usually wipe staging partition via fastboot.
Since you got no fastboot access, you have to try with adb.
After cleaning the staging partition you can flash any recovery you want back again.
The recovery must be flashed to mmcblk0p4 <- 4!!! is the recovery partition. (but you should wipe mmcblk0p3 (3!!!) before)
So I would say, try what solution 1a suggests.
Edit: You can go back to stock android if you want, but there is no reason for this. My advice would be to unlock and root your device, upgrade to latest boot loader (which is done by upgrading to latest stock rom), then flash TWRP 2.8.5.0 and then a useful ROM on top. I'm using the one from timduru which is very nice. You can find it here: http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783
Thank you for the answer. Could you please write a step by step to get out of brick and to get the stock version, because the newer one I installed was many times slower. The reason why I would like to have step by step is because I don't wanna mess it even more than it is. Thank you so much.
//the stock rom was much more faster than the one I have installed, I mean... the boot time wad unbelievable slow, same with responses and wifi problem. If there is any other faster rom than stock I would be happy but I don't wanna mess with any bugs or slow boot speed and I can not wait minutes until it boots.
Hm, try the Option 1a from the link.
If done, boot into current recovery. Tell me which version and which recovery do you have.
Top on this we can decide what to do to flash a good ROM.
I had the exact same thing happen to me yesterday. Option #1 worked for me.
I did the steps from option #1 and powered down using the volume up + power. I then tried to boot into TWRP recovery, which only reproduced the same issue.
I redid the option #1 steps, and this time powered down using the power + volume down. I powered back up normally, and it rebooted normally into the ROM.
The tablet now works normally, and I can also boot back into TWRP recovery with no issues.
Thanks for the thread and the link.
Thank you so much Catscratch! After I executed both command from option 1a I can get into the screen, where it shows three options: RCK, Android, Wipe Data
In the top left corner, there is written:
Key driver not found.. Booting OS
Android cardhu-user bootloader <1.00 e> released by "WW_epad-10.6.1.27.5-20130902" A03
Starting Fastboot USB download protocol
The tablet can boot into the last ROM but as I said, I would like to have the faster and less buggy rom than this. When I open the settings and click about button there is written: CyanongenMod: 12.1-20150814-NIGHTLY-tf300t and Android version 5.1.1.
If I start RCK it just brings me back to the loop, but now I have fastboot available as it said above and I can list the fastboot devices on computer, which I couldn't before. Should I just execute this command from the computer "fastboot -i 0x0B05 flash system blob" and then "fastboot reboot" or should I download ROM from asus.com/Tablets/ASUS_Transformer_Pad_TF300T/HelpDesk_Download/ -> OS Android -> Firmware and now I don't know which should I choose: If JP or CN or WW or US or TW (Probably US right?). After that should I execute "fastboot -i 0x0B05 flash recovery firmware.img" and then "fastboot reboot" ? Or which ROM should I download to make it even faster and less buggy than stock ROM? Thank you so much again, You saved my tablet
//After I unzipped downloaded US ROM there is no img file. If I remember right the img file is only recovery to reflash the actual one and then when I start the twrp recovery I will select zip file with rom right?
OK, first of all to continue...I assume you got root access. (I think you should have, because you already got CM installed)
Next. Downloads.
Download: https://twrp.me/devices/asusTF300T.html
Also Download ROM+SuperSU: http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783
And GApps: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Push all files to sdcard with "adp push" or in CM. Like you want.
Flash TWRP. (you can skip this step if you already got TWRP 2.8.5.0 or higher version). You don't need latest one.
fastboot -i 0x0b05 flash recovery twrp.img
fastboot reboot
- or -
adb reboot recovery
Now, go into recovery and wipe everything:
- cache
- dalvik
- system
- data
After that flash ZIPs from sdcard. (use "add more zips" option)
1. ROM
2. Gapps
3. SuperSU
Next: Wipe cache and dalvik again (only these two).
Reboot and wait. First boot can take some minutes.
Thank you so much again. Everything work perfectly The rom looks a lot faster than the older one I had there. No issues yet at all. Just awesome. Thank you so much. Really appreciate your kindness and help. You have a nice day !
Thanks. Have fun with your tf300.
please..
i have problem with bootloader version 41.1A
i want to Downgrade to version 41.18 or 41.19
anyone know ..??
please share it
thank you
Up
Me too
My bootloader v 41.1A I downgrade 41.18 Help
Why do you need to downgrade? Messing with Bootloaders can destroy your phone.
even i want to downgrade... I cant flash custom recovery on 41.1A
poran123 said:
even i want to downgrade... I cant flash custom recovery on 41.1A
Click to expand...
Click to collapse
Bootloader cannot be downgraded. You're stuck on w/e version you have currently installed.
Okay so I'm stuck on 41.1A and my phone will continue to restart itself and then stuck in bootloop till the battery dies... and then when I connect it to the charger boot's up normally...
@lost101
Can you please let me know how to check bootloader version?
I am using Moto G XT1033 model(Asia).
It was updated to Lollipop 5.0.2 by Motorola Stock Lollipop update.
Later on I had unlocked bootloader and downgraded it to Kitkat 4.4.4 using this thread.
I don't have any clue about current version of bootloader in my Moto G.
I want to try Lollipop 5.1 Optimized stock rom link here, so just wanted to ensure compatibility of bootloader so that my phone works after flashing it.
kalpesh.fulpagare said:
@lost101
Can you please let me know how to check bootloader version?
Click to expand...
Click to collapse
Enter bootloader (hold volume-down while turning it on), read text on screen (second line).
I too want to know if there is a way to downgrade or at least reflash my damaged bootloader which is causing weird behaviour.
Sent from my Nexus 6P using Tapatalk
I have the exact same problem.
Stuck on 41.1A
Was on a slim6 rom before. Tried to return to STOCK_ASIA_RETAIL. All fastboot commands successfully executed but no apparent change. I have the exact same wallpaper, the same layers RRO navbars, everything. I would not need to go to STOCK but since the slim installation is unstable and everything force closes, the phone is unusable.
Additional note: Somehow even TWRP is stuck in the splash screen, so cant flash any other ROM. Even tried to access TWRP using adb, but the TWRP service fails to start.
I fastboot flashed phillz recovery, stock recovery & newer TWRP versions, but nothing happens. Phone still stuck in TWRP screen.
To my surprise I was able to pull my personal files from the internal SD using ADB (which still works btw).
But I'm left with a phone in a zombie unusable condition, it just doesn't react to anything.
Any help from the XDA community would be greatly appreciated. I am still keeping my fingers crossed, so that one day a guide comes up to brick my device (STOCK 5.1 bootloader) and unbrick it using some sort of unbrick tool.
Why is not possible to create a flashable zip with the bootloader inside? I want to downgrade to KitKat bootloader too
SLATE21&MOTOG said:
Why is not possible to create a flashable zip with the bootloader inside? I want to downgrade to KitKat bootloader too
Click to expand...
Click to collapse
Creating such a zip is possible, but flashing it may either not work or hard brick your phone.
How to install working recovery on 41.1A bootloader
I had the situation on my Moto G XT1039 where I had formatted the partitions on my phone (using my old CWM recovery), then flashed the 41.1A bootloader, but 41.1A would not allow me to flash any recovery.
So I had a working bootloader, but no recovery and no OS. And apparently no way to install a recovery, to install an OS...
I got the phone back like this:
- Flashed 4.4.4 stock manually using the bootloader (if you do this, DO NOT flash the 4.4.4 motoboot.img, according to everything on here that will permanently brick your phone; I am not sure about partition gpt.bin - I flashed this, but I was already on the 4.4.4 partition layout anyway). Do flash boot.img, that is the OS boot.
- So now I had a bootable phone OS (back on 4.4.4 again, with a flickering screen), but still no recovery.
- From the bootloader, I booted into an old recovery which I knew had previously worked with my phone:
Code:
fastboot boot clockworkmodrecovery.6051.peregrine.img
(this boots into a temporary copy of the recovery, without actually installing it on the recovery partition).
- Using that, I installed the SuperSU binary.
- Then I booted back into my 4.4.4 OS, installed the SuperSU app, checked it was working, then installed the TWRP Manager app (which requires root, hence the previous steps), then used that to successfully install the TWRP recovery on my phone.
From there I now had the correct recovery in place to flash the 5.1 Optimized distro (which I would definitely recommend - clean, stable, excellent battery life!).
Yay!
Bmju said:
- So now I had a bootable phone OS (back on 4.4.4 again, with a flickering screen), but still no recovery.
- From the bootloader, I booted into an old recovery which I knew had previously worked with my phone:
Code:
fastboot boot clockworkmodrecovery.6051.peregrine.img
(this boots into a temporary copy of the recovery, without actually installing it on the recovery partition).
- Using that, I installed the SuperSU binary.
- Then I booted back into my 4.4.4 OS, installed the SuperSU app, checked it was working, then installed the TWRP Manager app (which requires root, hence the previous steps), then used that to successfully install the TWRP recovery on my phone.
Click to expand...
Click to collapse
Why didn't you simply fastboot flash a TWRP image?
_that said:
Why didn't you simply fastboot flash a TWRP image?
Click to expand...
Click to collapse
I hope I haven't misunderstood, but isn't the whole point of this thread that the 41.1A bootloader won't let some poeple (including me) successfully flash anything to the recovery partition? You can run the command, but the recovery won't boot up. At least that's how it was for me.
Bmju said:
I hope I haven't misunderstood, but isn't the whole point of this thread that the 41.1A bootloader won't let some poeple (including me) successfully flash anything to the recovery partition? You can run the command, but the recovery won't boot up. At least that's how it was for me.
Click to expand...
Click to collapse
I see. So "fastboot boot" worked, but "fastboot flash" wouldn't write anything? In that case you could probably also have used fastboot boot with TWRP and then use TWRP's "install image" feature to flash it.
_that said:
I see. So "fastboot boot" worked, but "fastboot flash" wouldn't write anything? In that case you could probably also have used fastboot boot with TWRP and then use TWRP's "install image" feature to flash it.
Click to expand...
Click to collapse
Thanks! I definitely tried that first! Maybe this bit I didn't make clear in my post, but actually:
- fastboot boot was only working for me with older recovery ROMS, i.e. the older CWM recovery which I mentioned, which I had lying around from when I first rooted my phone on 4.4.4, and also - not that it's much use - with the recovery in the 4.4.4 image, which just brings up the dead Android logo
- fastboot flash recovery was not working at all, not even with the recovery roms which would boot with fastboot boot
- but fastboot flash to all the other partitions seemed to work fine (I could see that it seemed to be working because I was able to flash different logo.bin files to change the phone logo which shows before the phone tries to boot into recovery or OS) and as per my post this was how I was able to get my phone back eventually
This thread was the only place I could find which seems to represent people having the same set of problems, so I thought the above workaround might be useful in future to someone in the same situation.
Bmju said:
- fastboot flash recovery was not working at all, not even with the recovery roms which would boot with fastboot boot
Click to expand...
Click to collapse
So far nobody has posted a terminal transcript of "not working". Did it appear to succeed or did you get an error message?
Bmju said:
- but fastboot flash to all the other partitions seemed to work fine (I could see that it seemed to be working because I was able to flash different logo.bin files to change the phone logo which shows before the phone tries to boot into recovery or OS) and as per my post this was how I was able to get my phone back eventually
Click to expand...
Click to collapse
That doesn't make any sense. Not that I don't believe you, I just can't explain how fastboot could fail writing recovery but succeed in writing a different partition.
Bmju said:
This thread was the only place I could find which seems to represent people having the same set of problems, so I thought the above workaround might be useful in future to someone in the same situation.
Click to expand...
Click to collapse
Thanks for sharing your experience though, maybe it will help someone who has the same weird issue.
_that said:
So far nobody has posted a terminal transcript of "not working". Did it appear to succeed or did you get an error message?
Click to expand...
Click to collapse
It appears to succeed, except that it gives the 'mismatched partition size error' on the bootloader screen at the end of flashing. (Although other posts seem to state that this is normal for a non-strock recovery?)
Bmju said:
It appears to succeed, except that it gives the 'mismatched partition size error' on the bootloader screen at the end of flashing. (Although other posts seem to state that this is normal for a non-strock recovery?)
Click to expand...
Click to collapse
Yes, I've got that one too, but my flashed recovery then worked fine. However I upgraded my bootloader by installing the complete 5.1 stock ROM, maybe your bootloader update was somehow incomplete.
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
spacezork said:
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
Click to expand...
Click to collapse
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
the ljubich said:
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
Click to expand...
Click to collapse
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
spacezork said:
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
Click to expand...
Click to collapse
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
the ljubich said:
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
Click to expand...
Click to collapse
Sorry for my confusion with adb/sideload - from what I understand I need both to be able to connect to my device (correct me if im wrong). In the bootloader menu I see "flashing_unlocked" which I believe confirms my bootloader being unlocked, but then at the top of the text right under the dead android guy I see "AP Fastboot Flash Mode (Secure)" could that be an issue?
I can retry downloading the recovery from the TWRP site, but I know I'm downloading the official one already, just can't put my finger on why I'm getting that error message if others are doing it successfully.
thanks for helping :good:
Do you have the Verizon model?
samwathegreat said:
Do you have the Verizon model?
Click to expand...
Click to collapse
I have the canadian BELL model XT1650-03
spacezork said:
I have the canadian BELL model XT1650-03
Click to expand...
Click to collapse
You're at the bootloader, it says Flashing Unlock so yes your bootloader is unlocked and you should be able to flash TWRP no problem.
Did you recently install this .45 firmware? Are you sure that TWRP wasnt actually flashed? I see lots of errors like this from the bootloader and its usually just rubbish.
The twrp does not show the actual memory value of my cell phone and does not let me paste ROM backup, from insufficient memory? how to support it?
I updated my phone to .45 when I bought the phone I believe 1-2 weeks ago, it's definitely NOT flashed as the flashing process runs for 0.2 seconds and fails. I can even boot in the stock recovery afterwards confirming that nothing flashed. I wish I knew what I was doing wrong? possibility of drivers not installed properly?
Before I try and flash recovery I check USB debugging, OEM is unlocked, don't verify ADB files and accept Unknown sources. Is there anything I'm missing?
What if fastboot boot twrpname.img
It's really weird anyway...
enetec said:
What if fastboot boot twrpname.img
It's really weird anyway...
Click to expand...
Click to collapse
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
spacezork said:
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
Click to expand...
Click to collapse
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
enetec said:
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
Click to expand...
Click to collapse
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
spacezork said:
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
Click to expand...
Click to collapse
Right, bootloader screen. Enter on it by key-comb... not by command...
Even the real flash take same time... Sending seems to work, is something on verify that doesn't "like" it...
Try to download again recovery and/or check its MD5...
if reading correctly (and what I told you yesterday) command is
fastboot flash recovery recovery.img
and not
fastboot flash recovery.img
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Troll amiga said:
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Click to expand...
Click to collapse
try following this instructions: http://forum.xda-developers.com/showpost.php?p=69065373&postcount=14
and download eu rom from here: https://mirrors.lolinet.com/firmware/moto/griffin/official/RETEU/
i don't know from which ROM you are coming, don't know if downgrading works, but this was onl RETEU ROM i could find.
I have the exact same phone and I've upgraded to Nougat but I got my TWRP working. You need an unlocked bootloader and after upgrading to nougat, the option "unlock OEM" need to be enabled again.
I've used this TWRP : https://dl.twrp.me/griffin/twrp-3.0.2-0-griffin.img.html
Also I tried to only boot on it at first with the command fastboot boot twrp.img then I saw it was working, I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
cilk said:
...I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
Click to expand...
Click to collapse
Yeessss... I don't know how could I forgot it!!! :silly:
The message (I forgot I received too...) is *only* to indicate that recovery is not signed! But before there is a clear "Done" confirming the flash!
Just boot on it!