Dear Friends,
I tried rooting my Samsung S6 (SM-G920I - Indian version) using ODIN, I even got "pass" message but now in boot screen (top left corner) I am getting an error message saying "kernel is not seandroid enforcing" and also device is not getting started, it stuck on the same screen, could I please have a link to download respective firmware for my device, I tried many firmware but ODIN says failed, your help is much appreciated.
It's not an error, it's a warning.
Your device doesn't boot, because the kernel you've installed is not compatible with installed bootloader on your device.
Connect to PC in download mode and rescue the firmware via Smart Switch.
forumber2 said:
It's not an error, it's a warning.
Your device doesn't boot, because the kernel you've installed is not compatible with installed bootloader on your device.
Connect to PC in download mode and rescue the firmware via Smart Switch.
Click to expand...
Click to collapse
Thank you for your time, I will try the above method and will let you know the status
Bhargav Hegde said:
Thank you for your time, I will try the above method and will let you know the status
Click to expand...
Click to collapse
It worked, thank you so much !
Bhargav Hegde said:
It worked, thank you so much !
Click to expand...
Click to collapse
Nice to hear that
Related
my s5 stuck at about 75% with an android with a spinning box, i can't get into recovery mode it says "recovery not seandroid enforcing". my s5 is unrooted, if i try to reboot it it gets stuck on samsung logo.
JOB....T said:
my s5 stuck at about 75% with an android with a spinning box, i can't get into recovery mode it says "recovery not seandroid enforcing". my s5 is unrooted, if i try to reboot it it gets stuck on samsung logo.
Click to expand...
Click to collapse
the only thing you can do is to search how to use odin ...and install the latest firmware of your device and flash it via odin
flash- said:
the only thing you can do is to search how to use odin ...and install the latest firmware of your device and flash it via odin
Click to expand...
Click to collapse
when my device got stuck i had not rooted it plus i had not ticked the usb debugging in developer options, will odin still be able to load a new software????
JOB....T said:
when my device got stuck i had not rooted it plus i had not ticked the usb debugging in developer options, will odin still be able to load a new software????
Click to expand...
Click to collapse
follow this guide and if you need more info go here
Hi,
After i had flash a bootloader, modem and TWRP from this https://www.androidfilehost.com/?w=files&flid=50807 , i have some strange problems.
First, when i use odin now to flash a bootloader or TRWP and Official firmware, i had the message "fail".
The most strange it's my recovery mode, before they start i have a blue screen with this message "installing update system", after this they show me an android with warning sign. When i succees to enter recovery, i juste have the basic one and a strange message at the top "(Android Recovery. Samsung/zerofltexx/zeroflte. 6.0.1/MMB29K/G920FXXU3PAD. User/release-keys".
Now i just want to have TWRP, to flash a custom rom, but always odin show me the message "fail".
Any idea ?
Thanks
Model? What android version did you have?
the FW : G920FXXU3DPAD_G920FOXA3DPAE_XEF
Model : G920F
I suceed to install the XEF FW and to install the 3.0.0 TWRP by odin, however when i want to enter recovery i just have the galaxy S6 animation and this "RECOVERY IS NOT SEANDROID ENFORCING"
Its stuck on s6 boot screen ? Or start nomal?
Sent from my SM-E500H using XDA-Developers mobile app
Try flashing these 3 with Odin;
920F bootloader (BL)
https://www.androidfilehost.com/?fid=24459283995301217
920F modem (CP)
https://www.androidfilehost.com/?fid=24459283995301218
TWRP by arter97 (AP)
http://www.arter97.com/browse/S6/ke...r97-recovery-g920fi-13.0-twrp_3.0.0-0.tar.md5
Recovery should be working.
Michiel0912 said:
Try flashing these 3 with Odin;
920F bootloader (BL)
https://www.androidfilehost.com/?fid=24459283995301217
920F modem (CP)
https://www.androidfilehost.com/?fid=24459283995301218
TWRP by arter97 (AP)
http://www.arter97.com/browse/S6/ke...r97-recovery-g920fi-13.0-twrp_3.0.0-0.tar.md5
Recovery should be working.
Click to expand...
Click to collapse
The recovery work well, however when i reboot my devise, it's stuck at the galaxy s6 logo :s
Did you install a new rom?
Try this one.
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
With the add-on package you can activate all the required bloatware if you need it.
Michiel0912 said:
Did you install a new rom?
Try this one.
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
With the add-on package you can activate all the required bloatware if you need it.
Click to expand...
Click to collapse
ohh thanks, with this rom it's working again . thanks you man
No problem!
you should put solved on thread's title.
good luck
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
Hey,
I tried to Root my J710FN and at some point I ****ed up.
I can´t enter recovery mode now and when I try to install stock firmware with Odin, I get the error message Secure Check Fail: (Bootloader).
When I start the device I get "recovery is not seandroid enforcing" message.
Is it somehow possible to fix this? I have to say that I am kinda lost at this point.
Suikakuju said:
Hey,
I tried to Root my J710FN and at some point I ****ed up.
I can´t enter recovery mode now and when I try to install stock firmware with Odin, I get the error message Secure Check Fail: (Bootloader).
When I start the device I get "recovery is not seandroid enforcing" message.
Is it somehow possible to fix this? I have to say that I am kinda lost at this point.
Click to expand...
Click to collapse
You're flashing the wrong firmware. Do you have a J7 or a On8?
ashyx said:
You're flashing the wrong firmware. Do you have a J7 or a On8?
Click to expand...
Click to collapse
On sammobile
Firmware are mixed up with j7 2016 and on8
If u hav j7 2016
Go to updato.com
And download latest firmware that will work
It is a J7.
Yes the firmware seems to be mixed up. I managed to fix it now.
I wonder why they mixed up the firmwares....
Thanks guys for your support.
hi! i am trying to install twrp but, when flashing with odin it says "fail" and my phone goes in "emergency recovery mode ". how can i fix this issue? i just want to install twrp and costume rom. please someone help.
unlock your bootloader first.
https://github.com/topjohnwu/Magisk/blob/master/docs/install.md#unlocking-bootloader
alecxs said:
unlock your bootloader first.
https://github.com/topjohnwu/Magisk/blob/master/docs/install.md#unlocking-bootloader
Click to expand...
Click to collapse
my device is galaxy s7 exynos with android 8 will this istructions still work for me?