Related
Press the power button and when I came out the menu where I gave the menu in the bootloader restarted and the screen went black and I was waiting to turn on the bootloader and did the screen to left off and now the cellular want to turn on, or when I press the power alone or when I press power + volume down and neither lED is lit. I humbly ask to see if I can help as no what else to do and I'm afraid I have not preucupado restart. PLS SOS
rem2711 said:
Press the power button and when I came out the menu where I gave the menu in the bootloader restarted and the screen went black and I was waiting to turn on the bootloader and did the screen to left off and now the cellular want to turn on, or when I press the power alone or when I press power + volume down and neither lED is lit. I humbly ask to see if I can help as no what else to do and I'm afraid I have not preucupado restart. PLS SOS
Click to expand...
Click to collapse
The phone is totally unresponsive? What Rom did you flash before this if you flashed a new Rom and give me the link to it
---------- Post added at 05:27 AM ---------- Previous post was at 05:24 AM ----------
It's pretty hard to hard brick a HTC ( knock on wood) mire info were you flashing a Rom or cuz if you were stock I can't imagine that happened
It might be as simple as ur battery is drained. Have u tried plugging it in overnight and seeing if it powers up next day?
Sent from my HTC One XL using xda premium
joshua54 said:
It might be as simple as ur battery is drained. Have u tried plugging it in overnight and seeing if it powers up next day?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Lol never though of that yes maybe it's that
I know it's happened to me twice now lol
Sent from my HTC One XL using xda premium
Lol, you have 3 posts(no biggy) but all 3 are different phones you killed. Whatcha doin:what:
Whatcha flash:screwy:
Sent from my Nexus 7 using Tapatalk 2
First of all thank you very much for helping me in this problem, the phone does not turn on when I press power and also when I press power and volume down and the LED does not turn on when I put it to charge. What you charge the battery overnight and also now not even turn on. What if I've noticed is that despite not firing when I connect the phone via USB to the computer the computer detects the phone and asks me to install drivers for QHSUSB_DLOAD. Before that I had damaged the ROM installed Nocturnal special edition / audio edition of KANLESS. Any help will be greatly appreciated. thanks
You must of flashed a diff Rom that's not for our phone let's mot try to put any blame on magical and his good Rom
rem2711 said:
charge the battery overnight and also now not even turn on. What if I've noticed is that despite not firing when I connect the phone via USB to the computer the computer detects the phone and asks me to install drivers for QHSUSB_DLOAD.
Click to expand...
Click to collapse
If your phone won't charge, and in Qualcomm download mode, you are pretty much screwed.
Another bites the dust......
Sent from my HTC One XL using xda app-developers app
rem2711 said:
I connect the phone via USB to the computer the computer detects the phone and asks me to install drivers for QHSUSB_DLOAD. Before that I had damaged the ROM installed Nocturnal special edition / audio edition of KANLESS. Any help will be greatly appreciated. thanks
Click to expand...
Click to collapse
I'm guessing you flashed something before Nocturnal and then went to Nocturnal after it messed up your phone. Your phone is bricked (QHSUSB tell us that), but Nocturnal wouldn't have done that.
Butters619 said:
I'm guessing you flashed something before Nocturnal and then went to Nocturnal after it messed up your phone. Your phone is bricked (QHSUSB tell us that), but Nocturnal wouldn't have done that.
Click to expand...
Click to collapse
Yeah, from what I understand, Qualcomm download mode means that hboot has been overwritten or otherwise damaged. Usually that is a result of flashing a ROM or recovery meant for another device. Flashing the "correct" ROMs does not touch hboot.
Did you flash any other ROMs, and what recovery were you using?
just plug the phone into the wall for a few hours then PM me. Its not any rom, no rom or recovery will do this to a phone. I'm sure its something very simple.
"QHSUSB_DLOAD" is basically a "panic mode" that the CPU goes into when it can't find a bootloader. So somehow or another you corrupted it.
There is a way to fix this using Linux, but I believe the phone has to have a charge.
Just search the S-Off thread, I remember someone mentioning how to do it there.
Sent from my HTC One XL using xda premium
Phone is A3LSGH-T959V.. Will power on and start to boot into recovery mode, but will shut down and start that process over again.. What do I need to do to fix this phone??
tlrichardson said:
Phone is A3LSGH-T959V.. Will power on and start to boot into recovery mode, but will shut down and start that process over again.. What do I need to do to fix this phone??
Click to expand...
Click to collapse
Confirm the model of phone you have. If it is indeed a SGH T959V, use the guide in the second link of my signature.
It is confirmed that the phone is in fact the SGH-T959V.. I'm using a Windows 7 PC, and the phone won't stay powered on long enough for the system to load the drivers for it.. Any other suggestions or advice is greatly appreciated...
tlrichardson said:
It is confirmed that the phone is in fact the SGH-T959V.. I'm using a Windows 7 PC, and the phone won't stay powered on long enough for the system to load the drivers for it.. Any other suggestions or advice is greatly appreciated...
Click to expand...
Click to collapse
Could you provide more info on how the phone got stuck, were you trying to flash a new ROM. Lumins guide is excellent( it has gotten me out of multiple self induced boot loops) but after installing one click, windows will not show you, on the pull down, a samsung composite device. you will have to look through the different drives that are shown to determine which drive your phone is on.
If you can get into the recovery mode, have you simply tried reflasing
tlrichardson said:
It is confirmed that the phone is in fact the SGH-T959V.. I'm using a Windows 7 PC, and the phone won't stay powered on long enough for the system to load the drivers for it.. Any other suggestions or advice is greatly appreciated...
Click to expand...
Click to collapse
If when you say shut down you mean bootloop, you need to read the guide as it says to put the phone in download mode. If your battery is dead, I'm sure you can figure out what you need to do to charge your battery on your own.
tlrichardson said:
Phone is A3LSGH-T959V.. Will power on and start to boot into recovery mode, but will shut down and start that process over again.. What do I need to do to fix this phone??
Click to expand...
Click to collapse
First make sure the battery is charged as Lumin suggested. If the battery is charged then my bet would be that you have a stuck power button. Try this. Pull the battery and put it back in. If the phone powers on by itself then your power button is stuck.
hechoen said:
First make sure the battery is charged as Lumin suggested. If the battery is charged then my bet would be that you have a stuck power button. Try this. Pull the battery and put it back in. If the phone powers on by itself then your power button is stuck.
Click to expand...
Click to collapse
Put in a brand new battery.. Phone is powering on by itself, but the power button doesn't feel like it's stuck.. Not saying it isn't stuck IJS.. It goes into recovery mode for a split second and resets.. Drivers won't load because the phone won't stay on long enough.. UGH!!
Definitely stuck
TwitchyEye said:
Definitely stuck
Click to expand...
Click to collapse
Without a doubt. Take the phone apart and clean the power button.
hechoen said:
Without a doubt. Take the phone apart and clean the power button.
Click to expand...
Click to collapse
I did, and seems to be working fine.. EXCEPT when I try to charge it or plug it into the pc.. It goes back into the boot loop.. Thinking the charger port may be the culprit here..
I was trying to flash BlissPop. It didn't flash. So, I decided to flash fastboot image of CM11s 44.
I issued this command :
Code:
fastboot flash modem NON-HLOS.bin
fastboot reboot-bootloader
fastboot flash sbl1 sbl1.mbn
fastboot reboot-bootloader
The flash sbl1 command gave an error.
I rebooted bootloader. The phone turned off, but it never turned on.
I don't know how could it brick my phone, because I've done it a few times without any error.
My battery was on 65% when I was doing all this. So, I don't suspect battery has died.
But, I'm charging the phone anyway. There is no lead, but the power bank shows that battery is taking charge.
When I connect the phone to PC, it shows no signs of any device connected. Device manager doesn't show any thing/any refresh.
I've tried to push the power button for about a minute for 5 times, as 1+1 site says.
I've tried vol up + power and vol down + power buttons. It doesn't boot it.
I've no access to fastboot, recovery, OS, anything.
Please, suggest me solutions.
Did you flash the firmware updates before you flashed bliss? There is a toolkit out there, linked in bliss thread, on how to unbrick. I'll see if I can't find it.
Sent from my A0001 using Tapatalk
---------- Post added at 11:49 PM ---------- Previous post was at 11:45 PM ----------
http://forum.xda-developers.com/showthread.php?p=58230647
First look at this perhaps. If not there is a toolkit out there to flash back to stock. Should be able to communicate w the phone if it can turn on at all.
Sent from my A0001 using Tapatalk
http://forum.xda-developers.com/showthread.php?p=58230647
First look at this perhaps. If not there is a toolkit out there to flash back to stock. Should be able to communicate w the phone if it can turn on at all.
Click to expand...
Click to collapse
Thanks. I looked at it.
But, as you said I can't do anything till the phone turns on even once.
BTW, I highly suspect battery drain, because I was in TWRP for long to take backup, flashing MultiROM, etc. TWRP is known to not allow charging, as reported by some people.
Can you tell me whether flashing sbl1 could have bricked it or not? It didn't fail to flash in past and it never caused problem.
I had flashed CM12 firmware update before flashing BlissPop. Could reflashing CM11s fastboot image over it cause problem. I think it should not, because fastboot image replace all things. What's your opinion?
Had the same problem. Try first leave it charging for 12 hours after that plug it in. Then get into fastboot this is not easy. Just hold vol up and power together for atv least 5 Sec.
Sent from my A0001 using XDA Free mobile app
I guess its possible. But I would do what falastine said. Charge it for some time. With a soft brick it may not show anything on the screen but could actually be on. So be patient trying to get the toolkit to find the phone. I've heard in another thread someone's phone did in fact connect but nothing was on the screen
Sent from my A0001 using Tapatalk
any progress on this? i think the exact same thing happened to me. was trying to flash back to CM11s using fastboot, but it died. now i dont get anything at all. no response to the chrager, or the computer or anything.
ive tried holding the power button, holding the vol keys with the pwr button, but no avail.
let me know if you figured it out!
Falastine said:
Had the same problem. Try first leave it charging for 12 hours after that plug it in. Then get into fastboot this is not easy. Just hold vol up and power together for atv least 5 Sec.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I left the phone in charge for 24 hours using original charger and wire.
Tried long presses for multiple times - nothing happens.
Tried vol up/ vol down combinations with power button for long nothing happens.
I am now waiting for 12 hours and then will plug it again, as some thread said.
In between I'm trying to download a tool from here : http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
I hope it detects my phone.
hassan3216 said:
any progress on this? i think the exact same thing happened to me. was trying to flash back to CM11s using fastboot, but it died. now i dont get anything at all. no response to the chrager, or the computer or anything.
ive tried holding the power button, holding the vol keys with the pwr button, but no avail.
let me know if you figured it out!
Click to expand...
Click to collapse
There is no progress.
It appears that we are in same situation.
I highly suspect dead battery, instead of dead phone. Anyway, I'll post updates.
Please, share if anything works for you.
I had the same problem and had to restore the phone with this tool:
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
I had many problems with the drivers and i had tot install the qualcom drivers http://sciencespaces.com/search/Qualcomm+HS-USB+Android+DIAG+9018/
The topic said that there is an issue with the modem and you have tot flash it manually but i don't have problems so far.
michaeldepotter said:
I had the same problem and had to restore the phone with this tool:
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
I had many problems with the drivers and i had tot install the qualcom drivers http://sciencespaces.com/search/Qualcomm+HS-USB+Android+DIAG+9018/
The topic said that there is an issue with the modem and you have tot flash it manually but i don't have problems so far.
Click to expand...
Click to collapse
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I've windows 8.1 64 bit.
I'm at work now but in a couple of hours i can give you more info how i did it
Sent from my A0001 using XDA Free mobile app
michaeldepotter said:
I'm at work now but in a couple of hours i can give you more info how i did it
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
@michaeldepotter,
Sure, no problem.
I'll be eagerly waiting.
mahastat said:
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I've windows 8.1 64 bit.
Click to expand...
Click to collapse
open your device manager in your pc and use volume up and power button while connected to pc to get into qualcom mode.most probably it would be detected as android fastboot interface just click on it and update the driver to qualcom usb serial interface then use http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851 this tool to recover
wilbur2brooks said:
open your device manager in your pc and use volume up and power button while connected to pc to get into qualcom mode.most probably it would be detected as android fastboot interface just click on it and update the driver to qualcom usb serial interface then use http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851 this tool to recover
Click to expand...
Click to collapse
@wilbur2brooks
Thanks for writing.
I could understand that once my phone is detected as even unknown device, I can install drivers and try to recover through the tool you mentioned.
But, the problem is that my phone is not recognized as anything. The Device Manager shows no reaction when I connect the phone to computer.
I have disabled driver signature on my Windows 8.1 64 bit. I've Qualacom drivers installed. Rebooted computer in disabled signature mode.
I've connected my device through official cable and I've tried the key combination mentioned.
My other devices show up when connected to PC, but 1+1 doesn't.
Any other thing which I could try.
I had left my phone in charging for 24 hours, but it doesn't wake it up.
Any suggestion is appreciated.
mahastat said:
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I have windows 8.1 64 bit.
Click to expand...
Click to collapse
So this is how i did it.
1. install the drivers from OPO (located in the .zip file from this tool https://forums.oneplus.net/threads/t...ks-etc.237827/ )
2. Open your device manager (Start - right click on computer - properties - devices manager)
3. Press on power + vol up for like 10 sec until you see a device showing up (called QHSUSB_BULK)
4. Download the qualcomdriver ( https://www.dropbox.com/s/vgujdut93m341qm/Qualcomm 2012.rar?dl=0 ). Right click on this devices and click on "Update Driver Software" -> "Browse my computer for driver software" -> locate the Qualcomm 2012\fre\Windows7 8 or vista folder depending on your setup. Update the driver.
5. Now the OPO tool should recognize your device. I turn off all my network connections so the usb device can't find other drivers. (in case windows overwrite the driver).
---------- Post added at 07:29 PM ---------- Previous post was at 07:07 PM ----------
Have you tried another PC?
Sent from my A0001 using XDA Free mobile app
michaeldepotter said:
So this is how i did it.
1. install the drivers from OPO (located in the .zip file from this tool https://forums.oneplus.net/threads/t...ks-etc.237827/ )
2. Open your device manager (Start - right click on computer - properties - devices manager)
3. Press on power + vol up for like 10 sec until you see a device showing up (called QHSUSB_BULK)
4. Download the qualcomdriver ( https://www.dropbox.com/s/vgujdut93m341qm/Qualcomm 2012.rar?dl=0 ). Right click on this devices and click on "Update Driver Software" -> "Browse my computer for driver software" -> locate the Qualcomm 2012\fre\Windows7 8 or vista folder depending on your setup. Update the driver.
5. Now the OPO tool should recognize your device. I turn off all my network connections so the usb device can't find other drivers. (in case windows overwrite the driver).
---------- Post added at 07:29 PM ---------- Previous post was at 07:07 PM ----------
Have you tried another PC?Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
The hard part is that I could not get the phone detected by PC as anything.
I followed the same key combination which you mentioned. It doesn't help.
Can you tell me if battery is totally depleted, will it be possible for phone to be detected?
I've tried to charge my phone with various chargers and power banks. The battery stays cold, the charger stays cold, power bank blinks and get depleted, but phone is not vibrating even on long press.
I've tried on virtual PC, a XP machine. And on other real XP PC.
Thanks for your help.
If you have some more suggestions based on information given by me, kindly post it again.
mahastat said:
@wilbur2brooks
Thanks for writing.
I could understand that once my phone is detected as even unknown device, I can install drivers and try to recover through the tool you mentioned.
But, the problem is that my phone is not recognized as anything. The Device Manager shows no reaction when I connect the phone to computer.
I have disabled driver signature on my Windows 8.1 64 bit. I've Qualacom drivers installed. Rebooted computer in disabled signature mode.
I've connected my device through official cable and I've tried the key combination mentioned.
My other devices show up when connected to PC, but 1+1 doesn't.
Any other thing which I could try.
I had left my phone in charging for 24 hours, but it doesn't wake it up.
Any suggestion is appreciated.
Click to expand...
Click to collapse
Even if your battery is depleted it should get detected in your machine when u press volume up and power while its connected to your pc.hold it for a minute this combination should show something also keep your pc volume up to hear any port connect discconect sounds.If this doesnt happen then your hardware is dead no other option but try to give it to opo for service.
So, nothing ever comes on the screen? Does the phone vibrate if you hold the power button for 20 seconds? If so, this might be of help, if it sounds like it's bricked: http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
wilbur2brooks said:
Even if your battery is depleted it should get detected in your machine when u press volume up and power while its connected to your pc.hold it for a minute this combination should show something also keep your pc volume up to hear any port connect discconect sounds.If this doesnt happen then your hardware is dead no other option but try to give it to opo for service.
Click to expand...
Click to collapse
I've PC volume UP, device manager in front and phone connect. Key combination brings nothing.
So, I think I'll take it to OPO Service Center now.
Thanks for helping me.
netbuzz said:
So, nothing ever comes on the screen? Does the phone vibrate if you hold the power button for 20 seconds? If so, this might be of help, if it sounds like it's bricked: http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Nothing comes on screen, no vibrations. It's bricked.
Going to OPO Service Center.
Thanks for looking after my problem.
I appreciate all who took part in this thread to help me. Thanks.
Moderators may close this thread now.
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
ashawanz said:
I was using lrteam twrp 3.4.2b-1206 and I was sideloading the vendor update for 12.2.1.0 when the progress bar froze. I gave it 10 minutes and held the power button to reboot and now the phone is showing no signs of life i cant get it to even show the poco screen. I've got no ideas left on what to do.
Click to expand...
Click to collapse
Did you try holding power and volume down? Also charge it for some hours.
Tecardo said:
Did you try holding power and volume down? Also charge it for some hours.
Click to expand...
Click to collapse
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Where did you find vendor update for 12.2.1.0 ?
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Click to expand...
Click to collapse
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Tecardo said:
Some users postet from Xiaomi firmware website (non official) . Link is in many rom threads
Click to expand...
Click to collapse
Firmeware not vendor,not the same.
is the phone appear on pc?
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
NOSS8 said:
Firmeware not vendor,not the same.
is the phone appear on pc?
Click to expand...
Click to collapse
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Tecardo said:
as I remember it's included? Otherwise use Xiaomi eu rom. It's including vendor.
Click to expand...
Click to collapse
My first question was for ashawanz" Where did you find vendor update for 12.2.1.0 ? "
and this answer" If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have" was not intended for you 'my mistake' but still for ashawanz
ashawanz said:
yeah no combination of buttons will show any signs of life and i can't even get to the bootloader. It should be at 100% battery at this point i dont think that's the issue either
Click to expand...
Click to collapse
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Tecardo said:
Did you attach it to pc and see what device gets detected then? It could be in qualcomm usb mode
Click to expand...
Click to collapse
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
ashawanz said:
So I just took the device apart to try and get into qualcomm edl mode through hardware and now the front camera led turns red while charging. apart from that there are no signs of life though it won't show up in my pc's device manager even though I have the qualcomm drivers
Click to expand...
Click to collapse
So you should let it charge till later in 6h
NOSS8 said:
Where did you find vendor update for 12.2.1.0 ?
Firmeware not vendor,not the same.
is the phone appear on pc?
If the the phone appear in qualcom usb, flashing in EDL will be possible and requires an authorization that only official repairers have.
Click to expand...
Click to collapse
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
ashawanz said:
Phone does not appear on pc and I got it from the evoX 5.1 thread. Ive flashed it before however and it didn't do this it worked just fine
Click to expand...
Click to collapse
This is the correct firmware.
What do you want to do in EDL mode?
NOSS8 said:
This is the correct firmware.
What do you want to do in EDL mode?
Click to expand...
Click to collapse
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
To try to restore the phone yourself, you must use commands in fastboot or adb.
Tecardo said:
It's not booting, he doesn't want to get into edl. It's showing no reaction. But he could try pressing power button for 1min and look for vibration
Click to expand...
Click to collapse
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
ashawanz said:
the power button for a minute didnt do anything either sadly. Im trying to get into edl so i can try and recover it with QPST, but even after opening the phone up and trying to get into edl through hardware, i was only able to get the red charging light to start showing whilst charging. Should I try to disconnect and reconnect the battery maybe?
Click to expand...
Click to collapse
Yep, can't hurt at this point.
You can try this:
Recharge the battery for at least 1 hour (even if you think it is already charged)
after connect it by usb and press the power button first,power button with volume -, button with volume +, and try to see if it appears on the pc and in what way.
When I used the Fastboot Enhance tool to flash the payload.bin file, after the flash process finished I try to reboot but unfortunately it was dead.
No Fastboot, no EDL, no recovery, 3 buttons not working, power with up/down not working, when i connect to PC no sound that the pc recognize the phone "OP 8T", when I plug it into charger no info showing, Just black screen.
So it's working now, I'll explain everything here so it might help.
My device is OnePlus 8T DDR5 version
first, I understand what happened to me, I think the tool didn't recognize ram type automatically so it was flash DDR4 on a DDR5 device, so it made a hard brick
at this point, the idea is to connect 2 test points, and you can force your phone to enter to EDL mode, and we can do it in two ways:
1. Rootk1t giude, thax bro Rootk1t
- Removing the back panel by heating it.
- Unplugging battery
- Then use the EDL points on the motherboard to force the device to boot EDL.
- The device immediately will be recognised with just one tap on "enum" now.
- Plugging the battery again and attaching the back panel and rebooting
2. By using deep EDL cable, but not any edl cable, it must be a moded cable so it can be worked with the new security ...... this link will explain
Hydra Tool Gift Xiaomi, Huawei, Redmi Qualcomm EDL Mode New V2 Cable!! - GSM-Forum
Hydra Tool Gift Xiaomi, Huawei, Redmi Qualcomm EDL Mode New V2 Cable!! Hydra Tool New Type-C EDL cable Schematic With this cable you can reboot your
forum.gsmhosting.com
- So i use Hydra EDL Cble V2 , you can buy it from aliexpress
- Be ready and open your MSM tool
- Press the cable button before connecting
- Connect the cable to your phone when you still pressing the button
- Then connect the USB to your PC
- It will automatically put your phone in EDL mode
- Now your phone will show in the MSM tool screen so you can revive it.
Thanks to everyone who tried to help.
Special thanks to Rootk1t , semdoc
Abdo Ismail said:
when I used the Fastboot Enhance tool to flash the payload.bin file, after the flash process finished I try to reboot but unfortunately it was dead.
No Fastboot, no EDL, no recovery, 3 buttons not working, power with up/down not working, when i connect to PC no sound that the pc recognize the phone "OP 8T", when I plug it into charger no info showing, Just black screen.
I don't know what should i do, please anyone help me with this problem.
Thanks in advance
Click to expand...
Click to collapse
Are you sure no EDL? Did you try the msm tool to restore to factory settings?
JedidroidX said:
Are you sure no EDL? Did you try the msm tool to restore to factory settings?
Click to expand...
Click to collapse
I'm sure, and I try MSM , the phone can't connect anymore to PC
Abdo Ismail said:
I'm sure, and I try MSM , the phone can't connect anymore to PC
Click to expand...
Click to collapse
Seem like you flashed the wrong xml for the ram type. There is one for ddr4 and ddr5. If EDL is not working I'm afraid according to several post it's an unrecoverable brick...sorry mate!!!
However keep searching for a solution, you never know maybe a new method of recovery from this disaster may exist. I'll keep searching and if I find anything I'll post it here!
Also have you tried the 3 buttons connected from charger and disconnected? Usually for some reason my phone won't respond with the 3 buttons when connected to usb sometimes.
Also have you used the msm tool before?
JedidroidX said:
Seem like you flashed the wrong xml for the ram type. There is one for ddr4 and ddr5. If EDL is not working I'm afraid according to several post it's an unrecoverable brick...sorry mate!!!
However keep searching for a solution, you never know maybe a new method of recovery from this disaster may exist. I'll keep searching and if I find anything I'll post it here!
Also have you tried the 3 buttons connected from charger and disconnected? Usually for some reason my phone won't respond with the 3 buttons when connected to usb sometimes.
Also have you used the msm tool before?
Click to expand...
Click to collapse
Thanks bro for your cooperation, yes i tried everything and yes i used MSM tool a lot of time.
i'll searh more to fix this prob, thx again
Abdo Ismail said:
Thanks bro for your cooperation, yes i tried everything and yes i used MSM tool a lot of time.
i'll searh more to fix this prob, thx again
Click to expand...
Click to collapse
Just one more thing, when you connect the phone to pc check your device manager to see if the PC reads the phone. If it does than its just a driver issue and reinstalling the qualcom driver for msm maybe needed.
I've found that sometimes I have to reinstall the Qualcomm drivers for EDL. So check that when you connect the phone to the PC in EDL mode there isn't an entry in Device Manager under Ports (COM & LPT)
JedidroidX said:
Just one more thing, when you connect the phone to pc check your device manager to see if the PC reads the phone. If it does than its just a driver issue and reinstalling the qualcom driver for msm maybe needed.
Click to expand...
Click to collapse
when I connect it to PC I can't hear the sound which appears when you connect a new device, and also no changes in the device manager unfortunately
BillGoss said:
I've found that sometimes I have to reinstall the Qualcomm drivers for EDL. So check that when you connect the phone to the PC in EDL mode there isn't an entry in Device Manager under Ports (COM & LPT)
Click to expand...
Click to collapse
I can't know which mode the phone is stuck on, because I have only a black screen, even the Power button with volume up / down not working,
do you think if I keep it for a couple of days the battery will drain and I can use MSM tool with press 2 volume buttons, it's the last thing i think about
Abdo Ismail said:
I can't know which mode the phone is stuck on, because I have only a black screen, even the Power button with volume up / down not working,
do you think if I keep it for a couple of days the battery will drain and I can use MSM tool with press 2 volume buttons, it's the last thing i think about
Click to expand...
Click to collapse
I would open it up and remove the battery instead of waiting for days but that's also an option. It's not that hard to open, I opened mines to replace the usb port. I just held the back of the bottom corners of the phone over the stove until it was hot enough to soften the glue and used an old credit card and my thumb nail to open it. It maybe unrecoverable anyway so its worth a try.
JedidroidX said:
I would open it up and remove the battery instead of waiting for days but that's also an option. It's not that hard to open, I opened mines to replace the usb port. I just held the back of the bottom corners of the phone over the stove until it was hot enough to soften the glue and used an old credit card and my thumb nail to open it. It maybe unrecoverable anyway so its worth a try.
Click to expand...
Click to collapse
yes, I thought to do that, so I keep it to be the last option, I'm still searching for any new ideas.
bro, really I want to thank you for supporting me, I appreciate that
Abdo Ismail said:
I can't know which mode the phone is stuck on, because I have only a black screen, even the Power button with volume up / down not working,
do you think if I keep it for a couple of days the battery will drain and I can use MSM tool with press 2 volume buttons, it's the last thing i think about
Click to expand...
Click to collapse
I've had a totally black screen at times in Qualcomm Crashdump Mode. To get out of it you can use Power+Vol up and then, when the phone buzzes, use the key combination for bootloader or MSM.
BillGoss said:
I've had a totally black screen at times in Qualcomm Crashdump Mode. To get out of it you can use Power+Vol up and then, when the phone buzzes, use the key combination for bootloader or MSM.
Click to expand...
Click to collapse
I tried a lot to press Volume Up + Power & Volume Down + Power & the 3 buttons, but with no response.
I can't feel any buzz, even I tried it when the phone connected to the PC, no sound come from PC prove that the phone is connected
Please keep us updated with any current queries or resolution as I'm very interested in the outcome.
Thank you!
Abdo Ismail said:
when I used the Fastboot Enhance tool to flash the payload.bin file, after the flash process finished I try to reboot but unfortunately it was dead.
No Fastboot, no EDL, no recovery, 3 buttons not working, power with up/down not working, when i connect to PC no sound that the pc recognize the phone "OP 8T", when I plug it into charger no info showing, Just black screen.
I don't know what should i do, please anyone help me with this problem.
Thanks in advance
Click to expand...
Click to collapse
Hello!
If waiting for battery to discharge will not help you, i suggest of:
- Removing the back panel by heating it.
- Unplugging battery
- Then using the EDL points on the motherboard to force the device to boot EDL.
-The device immediately will be recognised by just one tap on "enum" now.
- Plugging the battery again and attaching back panel and rebooting.
JedidroidX said:
Please keep us updated with any current queries or resolution as I'm very interested in the outcome.
Thank you!
Click to expand...
Click to collapse
sure my bro
Rootk1t said:
Hello!
If waiting for battery to discharge will not help you, i suggest of:
- Removing the back panel by heating it.
- Unplugging battery
- Then using the EDL points on the motherboard to force the device to boot EDL.
-The device immediately will be recognised by just one tap on "enum" now.
- Plugging the battery again and attaching back panel and rebooting.
Click to expand...
Click to collapse
thanks my friend for your suggestion, yes I was thinking about this solution, but I keep it to be the last one, I think I will try this method at the weekend as I'm busy with work these days.
I'll tell you after I try this solution.
Thanks for your cooperation
JedidroidX said:
Seem like you flashed the wrong xml for the ram type. There is one for ddr4 and ddr5.
Click to expand...
Click to collapse
I have the same problem now after trying to downgrade to OOS12
I used this, EU version, I cant find another version, which would have been the right one?
https://oxygenos.oneplus.net/4668_sign_KB2003_11_C_OTA_1360_all_86c2c1_01000100.zip
It installed, but now I cant start the ohone in any way.
Any tipps? Did it work for you Abdo Ismail?
SamNeuer said:
I have the same problem now after trying to downgrade to OOS12
I used this, EU version, I cant find another version, which would have been the right one?
https://oxygenos.oneplus.net/4668_sign_KB2003_11_C_OTA_1360_all_86c2c1_01000100.zip
It installed, but now I cant start the ohone in any way.
Any tipps? Did it work for you Abdo Ismail?
Click to expand...
Click to collapse
Similar case
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Rootk1t said:
Hello!
If waiting for battery to discharge will not help you, i suggest of:
- Removing the back panel by heating it.
- Unplugging battery
- Then using the EDL points on the motherboard to force the device to boot EDL.
-The device immediately will be recognised by just one tap on "enum" now.
- Plugging the battery again and attaching back panel and rebooting.
Click to expand...
Click to collapse
Thank you so much for this, after spending 16$ on a stupid edl cable that never worked, your guide revived my op8t I appreciate you!