So basically my phone just doesnt show up on my computer or any computer since like Android 6, not to big of a deal since i use airdroid to transfer files now and then, but i really would like to root again, so was wondering if its possible to root Android 6.0.1 - Build: MMB29S without a PC?
i can backup all my files if needed, and i have rooted in the past so my bootloader is unlocked
side note: i have tried dozens of adb/fastboot and usb drivers, none work :3
oneclickroot and kingroot all say i need a USB
Download Wugfresh Nexus Root Toolkit and use the "Install and test drivers" module to set up your drivers. Then you can flash recovery (I use TWRP) and from TWRP install Chainfire's systemless root v2.67 or doitright's systemless root (both in XDA forums).
Related
NOTE: Click on the images to enlarge them!!!:good:
DISCLAIMER: Rooting your phone will void your warranty, and can be dangerous. You may end up with a “bricked” device if anything goes wrong. I take no responsibility if something happens to your device. If you are ever in doubt STOP! This is not something to take lightly!
While rooting is reversible, it’s not something you should ever plan to do. Use some common sense here. If you don’t understand the consequences of what you are doing, DO NOT ROOT YOUR PHONE! You have been warned.
View attachment 2312405
So you have bought the GT-S5282 and after getting bored of playing with it have decided to give the ultimate treatment to your new toy, ROOT IT!!!
Well you have come at the right place. Today I will share with you friends a ridiculously easy way to root your Samsung Galaxy Star Duos. Your droid should be running stock firmware and you need Windows OS running on your computer.
Just follow the steps mentioned below carefully:-
1. Download the version of Cydia Impactor for Windows OS from this link www.cydiaimpactor.com
2. Install your device drivers by installing Samsung Kies on your PC and then connecting your phone to your PC via data cable. The device drivers will be installed automatically after few minutes.
OR
Alternatively you may install ADB drivers from the given link adbdriver.com and after turning on USB debugging in the Developer Options of your droid and connecting it to your PC via data cable, clicking on the Install option the drivers will be installed automatically.
3. Enable USB debugging from Developer Options in your droid (if you have not enabled it previously) and connect your droid to your PC via data cable.
4. Extract the file downloaded in first step and run Impactor.
View attachment 2312448
5. The programme should be displaying the command # drop SuperSU su to /system/xbin/su as shown above. Click start and run this command in the Impactor and wait for a few seconds for the process to get completed. When the programme again displays the above command, WOW you have successfully rooted your phone!!!:highfive:
6. Last but not the least you need to install these free apps from the Play Store before you enjoy root privileges on your droid....
i. SuperSU - This is required to access Superuser privileges on your droid. https://play.google.com/store/apps/details?id=eu.chainfire.supersu
ii. BusyBox - This is required to install the BusyBox binaries on the rooted device which is needed to run some root apps. https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
NOTE: Installing the above two apps are a MUST to access ROOT features on the phone!!!
7. TADA! You are now free to enjoy your ROOTED Samsung Galaxy Star Duos and unleash the hidden power user within you...!!!
NOTE: This method only works on preupdated old firmwares. If you get "signature bugs unavailable" error, it means you are running the latest/updated version of the stock firmware which comes with the bugs patched. For you guys who get this error, you need to flash the old stock ROM released before August for your device. You can download the stock firmwares from here http://samsung-updates.com/device/?id=GT-S5282
You need to flash the stock firmware on your droid via Odin. For help regarding how to flash stock ROM via Odin, check out this thread http://forum.xda-developers.com/showthread.php?t=2482371
If I have helped you to root your GT-S5282, please press the THANKS button...:good:
1. First, you can root v387 by Kingo Root on Windows with phone usb cable connection:
- Install Kingo Root in windows
- Start Kingo Root, plug the phone into the pc, hit confirm usb connection, phone will be recognized as an HTC phone, do not worry and click yes to confirm rooting... and the phone will be root after it automatically restart. If you still do not see SuperSU, do the manipulation root again and make sure 100% success!
2. Next, you can install TWRP through android app "Rashr - Flash Tool":
- Install Rashr - Flash Tool in phone
- Copy "TWRP_Philips_V387.img" to SDCard in phone
- Start Rashr - Flash Tool, choose "Recovery from Storage", choose file "TWRP_Philips_V387.img", confirm install, restart phone and done!
~~#
Thanks ....
i had bought this phone from local distributor in Egypt less than one month ago.
i had tried several rooting methods starting from MTKtools to Vroot methods
unfortunately all had failed
through this simplified tutorial i will guide you how to root your G-TiDE V1 simply and obtain full root access
we all know that "the best thing for android is just root"
there are no need for TWRP/ CWM to root via this method
you just need your V1 device,
functioning USB cable,
windown runing combuter,
and an internet connection for both.
1st download and install china phones USB drivers http://ge.tt/2yL21VT thanks @rua1
download and install MTk droid tools http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922 thanks @rua1
you have to try which driver would make your device readable by the droid tools
do not froget to activate USB debugging option in developer option menu after tabbing build number 7 times in about phone.
do not try to root via droid tools as it will not work
download and install Iroot version 1.7.9 to your PC and Vroot app to your phone.
https://drive.google.com/file/d/0B3ZlnmUEzg9jRWltQmRwTjA2SEk/view?usp=sharing
https://drive.google.com/file/d/0B3ZlnmUEzg9jZm9MUUtUWGk2aGs/view?usp=sharing
all your things are ready now
try to root your internet connected phone using vroot.apk
it will say succeeded and ask for a reboot: reboot yor phone
you will notice that a new crowned white lion app with blue shield (Chinese superuser app)
when you open it you will find no root access and iroot recommendation: install iroot and repeat the above steps
your phone still unrooted till now while when you connect it to droid tools it will show yellow box saying that the file bin/su is found click root to get root shell ( do not try; it will not work.
now reboot your phone to recovery from droid tools
perform wipe cache and factory reset then reboot
activate your phone developer option and tick USB debugging
open iroot PC application
connect your phone, when phone is detected try computer based rooting
it will reboot phone twice and then your device is now rooted: congrats
if you hate Chinese superuser app use the following tutorial to replace with SuperSu
http://neyomissright.credit495.ru/watch/crLvs8ec0FE/httpsyoutubecomdevicesupport.html
i am doing this now :fingers-crossed:
not to forget to thank all people and all sites that i read through them to do this.:good:
this is a call for all carrying G-TiDE V1 to be here to start a big development project.
enjoy.
photos and screenshots to be posted.
reminder
do not try nto replace super user app using this tutorial
http://neyomissright.credit495.ru/watch/crLvs8ec0FE/httpsyoutubecomdevicesupport.html
it will cost you your root.
it is just a spam.
I would advise you to try Root Genius which I had succeeded in gaining root from MT8732 tablet Ainol AX10-4G. The current version is RootGenius_en_2.2.6.exe not version 1.8.7 as shown in their English site.
There is APK version available from Official Chinese site but I managed to try out PC version only. Good luck
I need g-tide V1 software....pl help me
This Root method is for every leTV phone. I have tested this on both my X600 and X500.
Requires:
Any Windows Computer
iRoot
The following video shows how its done:
About iRoot (VRoot)
iRoot is a pretty popular phone hacking tool in China. I have installed this app personally and found it is safe for your computer. This app however does trigger a 17/53 Virus detection ratio on Virus total. The reason for this is that iRoot installs a few apps onto your phone during the installation process (you can uninstall them once your done). You can find more information about iRoot on XDA:
http://forum.xda-developers.com/showthread.php?t=2434453
If you prefer a cleaner installation, check out my manual root tutorial.
Method:
Connect your phone to your computer and enable USB debugging (See video)
Install iRoot - Download (make sure you download the PC version. Android version does NOT work)
After running iRoot, allow USB debugging authorization on your phone (pop -up prompt)
Usb debugging popup
Click the Green Root button on your PC. (you can ignore other popup prompts on your phone.)
That's it! Your phone will turn black for 2 seconds and enter TWRP. Please do not turn off your phone or disconnect your phone during this period. The phone will then automatically install the root and reboot.
Did this root procedure work for you? Leave a comment below!
Working on Letv x600 but TWRP is in China language.Any idea how to change for English one.
Download twrp theme manager from play store and then choose any theme and then apply that theme and this will also change your twrp into English. Thanks.
Hello, will this method erase anything on x600?
Rooting LeTv 1s x507 Indian Version SuperSU
for those who have a Indian Version, please check this video
Personally I am not fan of kingroot or iroot for ome reasons, I prefer pushing supersu from recovery which is more transparent way to Root.
however I needed to flash a userdata image provided by a user "naeem" to be able to gain root.
Phone will get Factory reset but once done, this works perfectly, I've been using it for 2-3 weeks and haven't had any issues except the ones
which are bugs on stock OS.
I cant root my phone (letv max) any idea? I tried alot of thing(i root/kingroot/towelroot) with apps/with p.c.
Hey Guys.
Merry xmas!
3 Days ago I bought a new Smartphone. An "ALCATEL One Touch Pop Star (5022D)" with Android 5.1
Now i want to root this Smartphone.
Any idea how to do this?
I tried oneclickroot.com but not working
Thanks
Bro full root with sw 360 Root.apk.................
Universal rooting methods:
Warnings:
You are modifying your own phone on your own risk.
There is a slight chance that your phone may brick,
and if it does I will not be held responsible for whatever you do to your phone.
If you have a warranty, after rooting it will no longer be valid.
If your phone has a flash counter, some methods may trip it
resulting in a void warranty or a bricked phone (or both).
If your phone has KNOX, it may be tripped by some methods,
resulting in, once again, a void warranty.
If your phone is encrypted, the data partition
may be wiped for some methods.
There are more warnings specific to certain devices. Do your own research on your paticular device model.
Click to expand...
Click to collapse
Computerless methods:
1. Framaroot
2. Towelroot
3. Kingroot for Android
4. Kingoroot for Android (Not recommended, but often works)
5. iRoot for Android
6. z4root
Methods requiring a computer:
1. iRoot
2. Root Master
3. Kingroot
3. Kingoroot (Not recommended)
4. CF-Auto-Root
Root Checker - Check if your device is correctly rooted
SuperSU - the recommended superuser application
ADB and fastboot drivers:
ADB and fastboot are (extremely simplified-ly) a way for your computer to talk to your phone. And installing them may be a bit of a problem for some users.
To install it on windows there is a handy tool called the 15 Second ADB installer which will install pretty much everything you need.
On Ubuntu install with:
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
On Fedora:
Code:
sudo dnf install android-tools
On OS X using Homebrew:
Code:
brew install android-platform-tools
Recovery:
A custom recovery is an important part of device unlocking. It's the best and the most convinient way to fix your device if something goes wrong.
Root is required (in most cases) for installing the recovery.
The two most popular recoveries are:
1. Clockworkmod recovery (CWM) - CWM is a very stable recovery with many useful features. You can use the link here to download and install the official version via the ROM Manager app.
2. Team Win Recovery Project (TWRP) - TWRP is a stable recovery with a very nice UI and many features such as the terminal, partition managment, file browser and so on. I personally use TWRP because of it's functionality, but if you're starting out CWM would be a better choice because of it's stability and compatibility. Also TWRP is a tiny bit more difficult to install as there is no one click installer.
If your device is not offically supported you can get an unofficial version, however there is no gurantee the unofficial version will work, it might even forever break your device. In most cases it does work, just look at what other poeple who tested it say.
To find unofficial recoveries Google:
[your phone model] cwm recovery
or
[your phone model] twrp recovery
After installing the recovery the first thing you should do it do a nandroid backup.
If you have any questions first try to Google the answer, butif you can't find it feel free to ask me here with a post (not a PM).
Also remember to quote me or tag me with @janekmuric if you want me to repond.