hi, i'm trying to authorize my phone for use this tool: http://forum.xda-developers.com/show...light=rejected
finally, i'm able to see my phone, but i got "rejected" i can't use the touch and can't see the screen
So, my question is:
in recovery i can use adb as i want, in fact i pulled the build.prop and edit by notepad, but when i turn on my phone i shoul accept the usb debug authorization. there's a way to edit the authorization file and manually insert my pc? thanks
BUMP
bump, please
Check out this link: http://android.stackexchange.com/qu...bug-mode-was-disabled-how-can-i-re-enable-adb
sorry, that's the working link: http://forum.xda-developers.com/showthread.php?t=2786395
btw i'm trying to see my phone on my pc using that tool, i want to check a few thing on it. but i need to authorize my pc, and i have to do it by clicking the message box on my phone, but my screen and touch are broken, so i'm trying to get that authorization from recovery, where i have all the access, included adb, but i don't know how to do it, i managed to activate usb debugging from recovery
edit: i've just saw your post, i already have a recovery wich supports adb, but i need to actually use the phone from the pc, i have to check if the phone, sim card, audio, bluetooth, etc.. are working, that's why i want to use my phone from my pc
icedzed said:
sorry, that's the working link: http://forum.xda-developers.com/showthread.php?t=2786395
btw i'm trying to see my phone on my pc using that tool, i want to check a few thing on it. but i need to authorize my pc, and i have to do it by clicking the message box on my phone, but my screen and touch are broken, so i'm trying to get that authorization from recovery, where i have all the access, included adb, but i don't know how to do it, i managed to activate usb debugging from recovery
Click to expand...
Click to collapse
Do you have [email protected]?
http://droid-at-screen.org
BluT00th said:
Do you have [email protected]?
http://droid-at-screen.org
Click to expand...
Click to collapse
yes, i'm able to see my phone, but i got "rejected" i can't use the touch and can't see the screen
and that's why i because i can't click "authorize" on the dialog box on the phone, that's why i'm trying to manually authorize the phone from adb, in recovery, for sure it is in some file
icedzed said:
yes, i'm able to see my phone, but i got "rejected" i can't use the touch and can't see the screen
and that's why i because i can't click "authorize" on the dialog box on the phone, that's why i'm trying to manually authorize the phone from adb, in recovery, for sure it is in some file
Click to expand...
Click to collapse
You cant manually do it from what im aware, you might have to talk to a developer who knows more about your phone.
Otherwise, restart and try again.
This might help: http://stackoverflow.com/questions/19886456/nexus-5-kitkat-4-4-wont-authorize-my-windows-8-computer
BluT00th said:
You cant manually do it from what im aware, you might have to talk to a developer who knows more about your phone.
Otherwise, restart and try again.
This might help: http://stackoverflow.com/questions/19886456/nexus-5-kitkat-4-4-wont-authorize-my-windows-8-computer
Click to expand...
Click to collapse
i've already looked on that link, unfortunally it doesn't work, as i say i know what's the problem, i have to click "authotize" on my phone, but as i said the touch and the screen are not working, so i have to manually edit some kind of file from recovery, using adb, where i have full access, but i don't know wich file, where i can ask for it? i don't know any dev forum :/ thanks!
icedzed said:
i've already looked on that link, unfortunally it doesn't work, as i say i know what's the problem, i have to click "authotize" on my phone, but as i said the touch and the screen are not working, so i have to manually edit some kind of file from recovery, using adb, where i have full access, but i don't know wich file, where i can ask for it? i don't know any dev forum :/ thanks!
Click to expand...
Click to collapse
You cant change any files on the phone. Its damn near impossible yo bypass. Unless you can find a Developer who knows the path. Sorry I couldnt help more.
BluT00th said:
You cant change any files on the phone. Its damn near impossible yo bypass. Unless you can find a Developer who knows the path. Sorry I couldnt help more.
Click to expand...
Click to collapse
well using the tutorial on this thread: http://forum.xda-developers.com/showthread.php?t=2786395
i was able to enable the usb debugging from recovery, maybe it's possible also to authorize the pc, i'm gonna keep looking, thanks anyway!
icedzed said:
well using the tutorial on this thread: http://forum.xda-developers.com/showthread.php?t=2786395
i was able to enable the usb debugging from recovery, maybe it's possible also to authorize the pc, i'm gonna keep looking, thanks anyway!
Click to expand...
Click to collapse
Depends on your skill. You can for instance compile your own build of a ROM with those features unlocked.
meganukebmp said:
Depends on your skill. You can for instance compile your own build of a ROM with those features unlocked.
Click to expand...
Click to collapse
well, i can learn, i don't know how it works but if i found a open project maybe it's not that hard to edit some file
Related
Im sure Ive asked before and its gotta be easy but seem after I use quick reboot to go through recovery or maybe something else I ll reboot and it shows my app icon but cant access. Thought it had something to do with usb debug?
blueis300 said:
Im sure Ive asked before and its gotta be easy but seem after I use quick reboot to go through recovery or maybe something else I ll reboot and it shows my app icon but cant access. Thought it had something to do with usb debug?
Click to expand...
Click to collapse
More details please. What rom and kernel are you running?
Got it solved thanks.
I removed root via SU, ran root checker to confirm, but I still cannot get OTA updates, get message saying "this device is suspected in rooting"
I can't unroot it any more than I have..
my main reason is the GPS, my phone has the poorest performing GPS of any phone I have had going back to my Google G1, gps will not lock while in a vehicle, cannot use google maps or any other nav.
Im hoping the update will fix it, failing that I will have to send it in for replacement, either way I need it fully unrooted.
Any ideas?
http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
jerrycoffman45 said:
http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Click to expand...
Click to collapse
I should have mentioned this.
I don't have access to a PC, OS X only.
Wingnutt said:
I should have mentioned this.
I don't have access to a PC, OS X only.
Click to expand...
Click to collapse
oops well maybe someone with a mac can help
... Apparently not
Wingnutt said:
I should have mentioned this.
I don't have access to a PC, OS X only.
Click to expand...
Click to collapse
As far as I can tell, a PC is the only way. Make sure you find one with a USB 2.0 port.
Not an option, at all.
Tried converting to GPE edition by following htc-one.wonderhowto.com/how-to/convert-your-htc-one-m8-into-google-play-edition-0154471/ and using this file: RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5_rooted.zip. (I don't have 10 posts yet, so I can't post URLs.)
During the process, I edited android-info.txt to include my phone's mid and cid. Everything seemed to go fine, but now it only boots to the bootloader screen where I can choose fastboot or recovery or whatever, but recovery doesn't work. Also, my laptop is no longer detecting my phone on USB so I can't use ADB commands.
Please help... Don't know what to do from here.
darkhelmet46 said:
Tried converting to GPE edition by following htc-one.wonderhowto.com/how-to/convert-your-htc-one-m8-into-google-play-edition-0154471/ and using this file: RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5_rooted.zip. (I don't have 10 posts yet, so I can't post URLs.)
During the process, I edited android-info.txt to include my phone's mid and cid. Everything seemed to go fine, but now it only boots to the bootloader screen where I can choose fastboot or recovery or whatever, but recovery doesn't work. Also, my laptop is no longer detecting my phone on USB so I can't use ADB commands.
Please help... Don't know what to do from here.
Click to expand...
Click to collapse
If you are still in this situation install team viewer and pm me the Id and passcode so I can take a look.
dottat said:
If you are still in this situation install team viewer and pm me the Id and passcode so I can take a look.
Click to expand...
Click to collapse
Yep, still am. However, this morning I rebooted my laptop and now it is able to detect the phone on USB so hopefully it is now fixable. I'll PM you after I get TeamViewer installed, thanks very much!
darkhelmet46 said:
Yep, still am. However, this morning I rebooted my laptop and now it is able to detect the phone on USB so hopefully it is now fixable. I'll PM you after I get TeamViewer installed, thanks very much!
Click to expand...
Click to collapse
Actually, I take that back... It makes the "ding" noise like it's connected, but ADB complains "device not found" when I try to run commands...
Forgot to update this. dottat helped me out earlier this week and he is indeed the man! I'm good to go!
NOTICE: I found out that this method doesn't work with the refurbished or the T-Mobile warranty exchange version. If you do Step 6, it would show the start up screen after 5 seconds being on the bootloader. If anyone has a fix for it, let me know!
Before you start, if you have access to the phone, be sure to:
• Remove your Google account
• Take off your lock screen password/PIN/pattern
• Uncheck “Protect Your Phone” from Settings > Security
• Deactivate all device administrators from Settings > Security (Optional; Just to be safe)
The reason you want to do this before you restore is that the factory image procedure wipes all data from your phone and it may trigger a “Verify Your Device” screen after flashing. You may have an error accessing your phone because the password of your Google account is incorrect, even though it is/isn’t correct. It’s very hard to recover from it because the “Verify Your Device” module isn’t really complete when it was implemented on this phone and it’s an Android 4.4.x device. There shouldn’t be a reason why it should be there since this module should exists on Android 5.1+. If you don’t have access to the phone to change/disable these settings, I recommend not proceeding if you want a bricked phone due that module error. If you still want to do it and you know FOR SURE that you have no password on lock screen and/or a Google account, then sure, by all means.
If you still don’t understand what I wrote above, read this forum or research on Android Device Protection.
UPDATE: PaKii94 found a way to bypass Android Device Protection. Be sure to read posts 21 & 23 for more information and thank him for that!
Click to expand...
Click to collapse
Download the factory image files before you start: Factory Image Files
Optional. The USB drivers should be in the factory image files: USB Drivers
Instructions:
1. Be sure your phone is completely powered off. You will know when it’s completely shut down when your phone vibrates after it shuts down.
2. Extract the files and then open \tool\EngineeringSoftwareDownload_S.exe. Also, the USB drivers are also in the tool directory.
3. The application should now be opened, but it asks for the user authentication. Here’s the login:
Username: SU_IN.Panasonic
Password: KoD8naL2
Server: Choose any
Click to expand...
Click to collapse
4. After you log in, you should see a flashing dialog. Now let’s prepare to flash!
5. Hold the volume up and down keys while plugging in the USB port. You should see that your phone is installing drivers. If you see a dialog asking for the destination of the drivers, copy the destination and paste it. (Make sure you see the notification LED lights and not see the charging screen/boot screen. If you do see it, take off the battery and do Step 6 again.)
6. After installation is complete, click the row where the COM port is new and click ‘Upgrade’.
7. It should show up a COM port and it will do its flashing. (If you have an error message, take off the battery and repeat Step 6.)
8. After flashing is finished, take off the USB from the phone and it should restart automatically. If a restart doesn’t take effect, just turn on the phone.
9. Here you go, your phone is restored! Your stress is gone! Be sure to put a Thanks afterwards!
I tried to use this to get my onetouch pop Astro back up but every time it tries to flash it keeps saying low battery and switch to high speed com port.Not sure what to do next.My phone was rooted and I took an ota update and it failed now it just boots to recovery.
wildchild048 said:
I tried to use this to get my onetouch pop Astro back up but every time it tries to flash it keeps saying low battery and switch to high speed com port.Not sure what to do next.My phone was rooted and I took an ota update and it failed now it just boots to recovery.
Click to expand...
Click to collapse
Was the battery charged?
If it was, try repeating Step 6 and try every USB port until it becomes successful. It may take a couple of times for it to flash.
download link is broken
Can you please upload or send a new link for the firmware and drivers. Thanks. You can please send me the link: [email protected]
Link is broken, I tried it last night and it worked but its not today,[email protected] please email it to me
Eemownz said:
Link is broken, I tried it last night and it worked but its not today,[email protected] please email it to me
Click to expand...
Click to collapse
kwamegh1 said:
Can you please upload or send a new link for the firmware and drivers. Thanks. You can please send me the link: [email protected]
Click to expand...
Click to collapse
I have DM'ed you guys the download links. Check your XDA accounts. Sorry I couldn't send via e-mail.
Hi everyone!
Great post!
I was looking for custom ROMs for Astro Pop but I cant find anything.
This phone has a good hardware but the stock android version maybe isnt the best for it.
Does anyone know if it's possible to flash it a CM or other compatible room?
Thanks for all.
Bye.
The Username is reading as incorrect. Is there an updated one that can be used? Has anyone figured out another way to restore this device from a soft brick state?
fredbhz1 said:
Hi everyone!
Great post!
I was looking for custom ROMs for Astro Pop but I cant find anything.
This phone has a good hardware but the stock android version maybe isnt the best for it.
Does anyone know if it's possible to flash it a CM or other compatible room?
Thanks for all.
Bye.
Click to expand...
Click to collapse
Unfortunately, no. There isn't a way to flash it at the moment and there isn't any custom ROMs developed for this phone
XCore64 said:
Unfortunately, no. There isn't a way to flash it at the moment and there isn't any custom ROMs developed for this phone
Click to expand...
Click to collapse
Oh, sorry to hear that
Thank you very much and have a nice day!
Link?
I'd like to try this and the links are broken. Could you DM them? Thanks!
Wannabe Jedi said:
I'd like to try this and the links are broken. Could you DM them? Thanks!
Click to expand...
Click to collapse
Just sent it to you. Go and check it
Quick question, would xposed framework work on this phone or would it be bricked?
this only for 5042T-2BTBUS1
do you have 5042T-2BWFUS1-R ??
thx
bam_ said:
Quick question, would xposed framework work on this phone or would it be bricked?
Click to expand...
Click to collapse
I tried it on the A3CUMC1 firmware on Xposed 2.6.1.
This shows up this on Framework:
There seems to be a known issue ("Aliyun OS") with your ROM. Installing Xposed might not work or lead to severe problems. Click here for details about this issue.
Click to expand...
Click to collapse
I installed it anyways and there isn't any problems with it. No bootloops and module runtime errors. You should be good.
Link Seems to be broken...
Can you please send me the updated link.... it would be greatly appreciated. .. [email protected] is my email address.
Can I also have the link? [email protected] Thanks!!!
whiteboiz93 said:
Can you please send me the updated link.... it would be greatly appreciated. .. [email protected] is my email address.
Click to expand...
Click to collapse
srraikov said:
Can I also have the link? [email protected] Thanks!!!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0B4TUksJrQEM9VDdMSjR3dS1Xc2c&usp=sharing
clbsamcodon said:
this only for 5042T-2BTBUS1
do you have 5042T-2BWFUS1-R ??
thx
Click to expand...
Click to collapse
I tried looking for it, no luck
5042t-2bwfus1-
I rewrote the program , under the 5042T-2BWFUS1-, but it takes off , any suggestions ?
Hello guys,
I need your assistance with this issue. I got this Boost Mobile LG LS770/Stylo phone from eBay and when I wiped/restored it to clean everything from the other person, the phone still wants me to enter the information from the previous person before I can use it. Of course that is not an option. I tried.
Also, since I am unable to get to the Android OS, I cannot put it in debug mode either. So I tried a few things to no avail. This is what I have done so far:
Put the phone in ADB mode via recovery - Done, but I am unable to sideload anything. I get this error.. "* cannot read 'sideload' *"
Put the phone in download mode "Fireware Update" - Done, and I can see my port as COM3, but when I run the next step, I get a message that says... "Hello, my name is LAF....." and nothing happens.
I tried using the LG one click root tool, but that requires the phone to be in USB debug mode and like I said before, I am unable to even get to the welcome screen in android. I can't get past wifi setup in reality, I can't even skip it.
I have been at this all day today. Can you please help me out? I really appreciate any help you can provide.
Thanks
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
I have OTG cable... Can you help me out??
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
Thank you for your response. I have one. Please go ahead with the steps.
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
Also, I forgot to respond to your question. I did contact the eBay guy or lady that sold it to me, but since I'm the one that did the wipe, they are not taking responsibility and I get it. I just would like to be able to use the phone and not waste the money I spent on it. I really appreciate any help you or others can provide.
Have OTG cable & flashdrive
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
I am stuck in the same boat, bought what appears to be a brick. Would be most grateful if I could get the files/procedure you mentioned as well.
Sorry guys!
https://www.youtube.com/watch?v=xNSBbpVOmb4
Thank you for the suggestion , but this method does not work. I have already tried this and after the tool went through all the steps, it still asks for the previous account. I have found on some other forums that LG patched this flaw a few months ago and it is no longer possible to bypass FRP Factory Reset Protection. I guess I have a rock until someone can figure out how to bypass this "Feature", which in my opinion should be illegal because it forces people to buy devices from carriers only and you can no longer sell your phone online to anyone, as you cannot give them the account.
webmanny said:
but this method does not work..
Click to expand...
Click to collapse
It didn't work for me either... the last security patch disabled user from the settings menu. I did find a way after many hours of work.
Basically once I got to settings I clicked unknown sources and then enabled USB debugging and oem unlock. After that I flashed twrp and then a rooted system image. After that I used http://androiding.how/bypass-google-account-verification-on-lg-g4-g3-and-others and it worked
Sent from my HTC One M9 using XDA-Developers mobile app
bigp951 said:
Basically once I got to settings I clicked unknown sources and then enabled USB debugging and oem unlock. After that I flashed twrp and then a rooted system image. After that I used http://androiding.how/bypass-google-account-verification-on-lg-g4-g3-and-others and it worked
Click to expand...
Click to collapse
How did you get to settings? I am only able to get to the accessibility to turn on the voice stuff.
webmanny said:
How did you get to settings? I am only able to get to the accessibility to turn on the voice stuff.
Click to expand...
Click to collapse
I honestly don't remember. I'll try to figure it out and get back to you. I think it was through the keyboard. I returned the phone already so I do t have it on front of me.
Look for anything with terms of service. Once you're on the internet you can download the settings app that everyone uses on the internet.
Sent from my HTC One M9 using XDA-Developers mobile app
Web trust me i went crazy with this for 3 days. My friend gave me his Stylo from work to unlock and i had this same issue. Flashed back to 5.1.1e,i,j, using kdz files and all the exploits that these guys are using have been shut down. If your on MM forget it. The only thing that worked for me was that tool i linked in the other thread. I hope your wrong on the virus part, ill check my laptop, but your the first person to mention that. Either way i flashed back to 5.1.1 from MM, used the tool, rebooted and it worked i signed in with his gmail.
sshafranko said:
Web trust me i went crazy with this for 3 days. My friend gave me his Stylo from work to unlock and i had this same issue. Flashed back to 5.1.1e,i,j, using kdz files and all the exploits that these guys are using have been shut down. If your on MM forget it. The only thing that worked for me was that tool i linked in the other thread. I hope your wrong on the virus part, ill check my laptop, but your the first person to mention that. Either way i flashed back to 5.1.1 from MM, used the tool, rebooted and it worked i signed in with his gmail.
Click to expand...
Click to collapse
I understand and I apologize if I sounded like I was shutting your advise down. That was not my intention. I was just stating what my virus tools detected and my experience. Regardless, I decided to ignore the virus warning and let the tool run and do what the steps on the word document stated. It went through all the steps without issues and I got the same matching screen as in the tutorial document. However, after I reboot, I still get the same screen that reads, login with a google account previously associated with this device.
Now, the one piece I'm not sure I understand from your message above is the part about flashing to 5.1.1 from MM using kdz files. How can you flash the phone when you cannot get into the settings to enable usb debug mode? I have tried everything. I even downloaded a rom file image that I placed on an Micro SD card and tried running it from recovery to no avail.
Maybe you are correct and I am just missing a step. Would you mind expanding on the flashing 5.1.1 from MM part? Maybe what steps and files you had to use?
Also, I'm not sure I understand this portion of your message. You signed in with who's gmail?
sshafranko said:
i signed in with his gmail.
Click to expand...
Click to collapse
Thank you in advance for your assistance.
is there a software older than 5.1.1 that can be flashed to the device?
You can use touch assistant to get in to settings and then disable all google aps, works for me on lg stylo 6.0, PaulieP he is the person that found this method