Currently on OK3. Would it be safe to install safestrap then flash xposed through that?
nkosa427 said:
Currently on OK3. Would it be safe to install safestrap then flash xposed through that?
Click to expand...
Click to collapse
Flash fire is better and easier. Try that
I tried to flash with Flash fire but have not been able to work, use Xposed xposed-v79-sdk23-arm.zip
http://forum.xda-developers.com/showthread.php?t=3034811
TheMasterMindGT said:
I tried to flash with Flash fire but have not been able to work, use Xposed xposed-v79-sdk23-arm.zip
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
I believe that you're using the incorrect Xposed. You need to be using the one's from Arter97 -xposed-v75-sdk21-arm-arter97-snapdragon,xposed-v71-sdk21-arm-arter97-V6-snapdragon or xposed-v71-sdk21-arm-arter97-V6-snapdragon. You need to go to the unofficial xposed forum for our devices
This is my only limitation:
/* Prerequisite */
Due to my skills limitation, only deodex'ed ROMs are supported for now.
Install the ROM [VZW Stock Based TW Rom] [5.0 Lollipop BOK3 Build Deodexed]
http://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-t3281095
And then install the version of Arter97 Xpossed -xposed-v75-sdk21-arm-arter97-snapdragon.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Now everything is going great in my Verizon S5
I was vzw stock based TWRom 5.0 Bok3 i then flashfired deodexed. It didn't appear to wipe the system files all my old files came back up, should i habe wiped first?
Sent from my SM-G900V using Tapatalk
intense21 said:
I was vzw stock based TWRom 5.0 Bok3 i then flashfired deodexed. It didn't appear to wipe the system files all my old files came back up, should i habe wiped first?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
It is recommended to flash a new rom
TheMasterMindGT said:
Install the ROM [VZW Stock Based TW Rom] [5.0 Lollipop BOK3 Build Deodexed]
http://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-t3281095
And then install the version of Arter97 Xpossed -xposed-v75-sdk21-arm-arter97-snapdragon.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Now everything is going great in my Verizon S5
Click to expand...
Click to collapse
im on a deodexed rom and flashed that xposed version and it says succesfull and that it worked and it optimized all the apps but when i reboot my phone it doesnt show up
Veid71 said:
im on a deodexed rom and flashed that xposed version and it says succesfull and that it worked and it optimized all the apps but when i reboot my phone it doesnt show up
Click to expand...
Click to collapse
What do you mean it doesn't show up? It doesn't show up in the Xposed installer?
CVertigo1 said:
What do you mean it doesn't show up? It doesn't show up in the Xposed installer?
Click to expand...
Click to collapse
yeah it was an error on my end lol i forgot to install the installer but i did it and it works thanks for the help
You guys just saved my day. BTW if the phone gets stuck in the Verizon screen after flashing with FlashFire, pull the battery and turn on again. Then it'll carry on to app update screen
Must be blind also
Hello,
I flashed the Snapdragon of Xposed through Safestrap, rebooted and the optimize screen came up and started the apps.
I went to the app drawer looking for Xposed and couldn't find it. Is it hiding some where? I'm sorry if this is a dumb question.
Thanks for your help.
PS: I didn't see any installer.
0-day warez:
http://bit.ly/21AIqkS
Xposed v80 test build. Deodexed ROM not required.
No Luck
I have the VZW_BOK3_STOCK_ROM_DEODEXED.zip and I've tried installing Xposed from snapdragon. I've tried through SafeStrap with the zip on both the ext sd card and the internal card and nothing happened except having the "apps compress" then home screen come up.
There is no "Loader", app, or apk for Xposed I just don't know where to go, or where it went.
I would like it installed.
You have to install the app seperately yourself.
This is Where?
I take it I can get it at the location in reply #14. Since that's a "Test" version is there a stable working version?
Thanks for your reply :cyclops:
blair.sadewitz said:
You have to install the app seperately yourself.
Click to expand...
Click to collapse
I hope this wil help some users to update or remove Xposed without having to reinstall a ROM.
I posted this on another thread and I basically searched and read through Arter97's Unofficial Xposed forum to find out how and what's needed to uninstall Xposed without having bootloops. It's worked for me numeroustimes. So it should work for you as well. Just don't forget to make a backup just in case...
What I've read and found out on how to remove an xposed version to either remove or update, is to
- pull the original "core-libart.jar" from the rom you're using and replace it with the one in the system setting the correct permissions
- reboot to safestrap recovery and flash "xposed-uninstaller-arter97.zip"
- wipe cache and dalvek cache
- flash your kernel that you're using in your ROM
- reboot (it'll take a while to get to home screen, so be patient)
- xposed is now Uninstalled
- reboot to recovery if you're wanting to flash a different xposed version and do the wiping steps and flash kernel as before.
Hope this helps you and others. I've done this 10+ times with no issues from V65 to V75. I haven't tried v79 as of yet and from reading Arter97's thread it installs differently and I believe you have to use a different method. When I get a chance to install it, I'll try to uninstall and post back.
blair.sadewitz said:
0-day warez:
http://bit.ly/21AIqkS
Xposed v80 test build. Deodexed ROM not required.
Click to expand...
Click to collapse
Thanks for the link. I can confirm that this works on Stock PB1 Odex ROM.
TheMasterMindGT said:
Install the ROM [VZW Stock Based TW Rom] [5.0 Lollipop BOK3 Build Deodexed]
http://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-t3281095
And then install the version of Arter97 Xpossed -xposed-v75-sdk21-arm-arter97-snapdragon.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Now everything is going great in my Verizon S5
Click to expand...
Click to collapse
hi . I did it like you say but the phone didnt open when I rebooted . İt hang out on Samsung GALAXYS5 how can ı solve this can you help me ... I just flashed the xposed-v75-sdk21-arm
---------- Post added at 11:30 PM ---------- Previous post was at 11:14 PM ----------
atacks said:
hi . I did it like you say but the phone didnt open when I rebooted . İt hang out on Samsung GALAXYS5 how can ı solve this can you help me ... I just flashed the xposed-v75-sdk21-arm
Click to expand...
Click to collapse
After 5 minutes the phone hang out on Verizon logo ...I am waiting 10 minutes but phone doesnt open ...What can ı do ??
Related
DISCLAIMER: By using this rom, you agree that you are the only one responsible for anything good or bad that may occur. Use at your own risk.
For Boost Mobile Moto E 2015 LTE XT1526 only.
The files contained in this thread have not been tested. Please let me know if you have issues.
Stock LPI23.29-18-S.12 Unmodified ROM
surnia_boost_LPI23.29-18-S.12-unmodified.zip
Stock LPI23.29-18-S.12 Debloated, Deodexed, Rooted ROM with Init.d and Insecure boot.img Support
surnia_boost_LPI23.29-18-S.12-deodexed.zip
Removed files and link to download them:
app/Books/Books.apk
app/Bug2GoStub/Bug2GoStub.apk
app/CloudPrint/CloudPrint.apk
app/Drive/Drive.apk
app/EditorsDocs/EditorsDocs.apk
app/EmailGoogle/EmailGoogle.apk
app/Exchange3Google/Exchange3Google.apk
app/GadgetGuardian/GadgetGuardian.apk
app/Gmail2/Gmail2.apk
app/GoogleHindiIME/GoogleHindiIME.apk
app/GooglePinyinIME/GooglePinyinIME.apk
app/Hangouts/Hangouts.apk
app/KoreanIME/KoreanIME.apk
app/Music2/Music2.apk
app/Newsstand/Newsstand.apk
app/PlayGames/PlayGames.apk
app/PlusOne/PlusOne.apk
app/Videos/Videos.apk
app/YouTube/YouTube.apk
app/iWnnIME/iWnnIME.apk
app/talkback/talkback.apk
etc/install-recovery.cfg
etc/recovery-resource.dat
priv-app/BodyGuardApp/BodyGuardApp.apk
priv-app/DemoMode/DemoMode.apk
priv-app/GuideMe/GuideMe.apk
priv-app/Moodles/Moodles.apk
priv-app/MotoCare/MotoCare.apk
priv-app/MotoCareInt/MotoCareInt.apk
priv-app/SprintID/SprintID.apk
priv-app/SprintInstaller/SprintInstaller.apk
priv-app/SprintZone/SprintZone.apk
priv-app/Wallet/Wallet.apk
priv-app/fswriter/fswriter.apk
recovery-from-boot.p
surnia_boost_LPI23.29-18-S.12_removed_files.zip
NOTE1: Your partitions need to have already been updated LPI23.29-18-S.11 before using this ROM. If you have not updated them to LPI23.29-18-S.11, you should ( zip located here ). Once updated, flash this partition updater AND the rom of choice.
NOTE2: The unmodified ROM is not rooted. To root, flash SuperSU after the ROM
NOTE3: Your device must have a custom recovery such as TWRP to flash ROMs.
Flash in TWRP as follows:
Download ROM
Put the ROM.zip on your sdcard if not already
Reboot to TWRP Recovery
MAKE A BACKUP!!!!!!!!!!
Wipe data/Factoy reset
Install partition updater from sdcard (see NOTE1 above)
Install ROM from sdcard
Reboot
Enjoy!
Credits:
@bigblueshock - For uploading the backup files and the update.zip
Hotspot Fix - These flashable zips will only work in this TWRP recovery
surnia_boost_LPI23.29-18-S.12_hotspot_fix.zip
surnia_boost_LPI23.29-18-S.12_hotspot_unfix.zip
reserved
reserved2
Hey Super,
So I tried a clean flash, not able to get past the boot screen with the teal M. Let it sit for about 20 minutes just in case.
Also tried another clean flash, this time with partition updater before JUST in case, same outcome.
Odd.. Not sure what the issue could be
bigblueshock said:
Hey Super,
So I tried a clean flash, not able to get past the boot screen with the teal M. Let it sit for about 20 minutes just in case.
Also tried another clean flash, this time with partition updater before JUST in case, same outcome.
Odd.. Not sure what the issue could be
Click to expand...
Click to collapse
Please try the unmodified ROM to see if the deodexing is causing issues. Thanks
SuperR. said:
Please try the unmodified ROM to see if the deodexing is causing issues. Thanks
Click to expand...
Click to collapse
I can confirm, unmodified ROM works perfectly.
bigblueshock said:
I can confirm, unmodified ROM works perfectly.
Click to expand...
Click to collapse
Next is to place the boot.img from the unmodified ROM in the deodexed ROM and see how that goes.
SuperR. said:
Next is to place the boot.img from the unmodified ROM in the deodexed ROM and see how that goes.
Click to expand...
Click to collapse
I placed the boot.img from the unmodified ROM and replaced the one in deodexed ROM, then did a clean flash of Deodexed.
First boot did take several minutes this time (a lot longer than just the unmodified one) But it works!!
Gracias!
bigblueshock said:
I placed the boot.img from the unmodified ROM and replaced the one in deodexed ROM, then did a clean flash of Deodexed.
First boot did take several minutes this time (a lot longer than just the unmodified one) But it works!!
Gracias!
Click to expand...
Click to collapse
It is normal for first boot to take a long time with deodexed roms. Would you mind flashing this modified kernel over your deodexed rom? If it works it will give you init.d and insecure boot, and I will upload a new deodexed rom with it.
surnia_boost_LPI23.29-18-S.12_mod_kernel.zip
If it does not work, you can flash this one to get back to stock kernel
surnia_boost_LPI23.29-18-S.12_stock_kernel.zip
Thanks
SuperR. said:
It is normal for first boot to take a long time with deodexed roms. Would you mind flashing this modified kernel over your deodexed rom? If it works it will give you init.d and insecure boot, and I will upload a new deodexed rom with it.
surnia_boost_LPI23.29-18-S.12_mod_kernel.zip
If it does not work, you can flash this one to get back to stock kernel
surnia_boost_LPI23.29-18-S.12_stock_kernel.zip
Thanks
Click to expand...
Click to collapse
Flashed the "mod" kernel. Booted right up!
Thank you
bigblueshock said:
Flashed the "mod" kernel. Booted right up!
Thank you
Click to expand...
Click to collapse
Thanks for testing. I updated the link in the OP with a new deodexed rom including the kernel from the "mod" kernel zip. I hope all is well now
Update PRL and Profile
SuperR:
I have successfully converted a stock Asian rom to work with the XT1526 for 5.1.1 and 6.0. I took the SprintSettings.apk from the 5.1 stock Boost rom and got the menus for activate and system updates to appear in settings. Unfortunately, when I tap the menu items I get an error. Any idea how the update prl and profile menus are integrated into the stock rom?
, Chys
R
Sent from my XT1526 using XDA-Developers mobile app
Wifi tether
Does the deodexed rom include wifi hotspot. I cannot get it to work for some reason tryed build prop edits but nothing worked
Does this rom support VoLTE .?
I m using ressurection remix ri8 now..
Net is working good, but can't make calls n texts..
Using jio on surnia xt1526 sprint..
Hello SuperR,
Could you provide more details on how you make a backup I would really appreciate it. thanks!
SuperR. said:
[B
surnia_boost_LPI23.29-18-S.12_removed_files.zip[/HIDE]
NOTE1: Your partitions need to have already been updated LPI23.29-18-S.11 before using this ROM. If you have not updated them to LPI23.29-18-S.11, you should ( zip located here ). Once updated, flash this partition updater AND the rom of choice.
Click to expand...
Click to collapse
I have latest CM13 on sprint XT1526. Using tWRP flashed above 2 partition update files, but still failed to flash this ROM. any idea?
dslack420 said:
Does the deodexed rom include wifi hotspot. I cannot get it to work for some reason tryed build prop edits but nothing worked
Click to expand...
Click to collapse
No it does not. There are some database edits along with the build.prop edits. I thought I made a flashable hotspot fix for the latest version. I will see if I can find it.
harsheshsachdev said:
Does this rom support VoLTE .?
I m using ressurection remix ri8 now..
Net is working good, but can't make calls n texts..
Using jio on surnia xt1526 sprint..
Click to expand...
Click to collapse
This is only for boost mobile.
amadorsg1 said:
Hello SuperR,
Could you provide more details on how you make a backup I would really appreciate it. thanks!
Click to expand...
Click to collapse
In twrp, choose the backup option.
min1968 said:
I have latest CM13 on sprint XT1526. Using tWRP flashed above 2 partition update files, but still failed to flash this ROM. any idea?
Click to expand...
Click to collapse
Send the recovery.log after flashing so I can see what is going on.
SuperR. said:
Send the recovery.log after flashing so I can see what is going on.
Click to expand...
Click to collapse
Attached
min1968 said:
Attached
Click to expand...
Click to collapse
This is your issue:
Code:
mount: failed to mount /dev/block/bootdevice/by-name/system at /system: Device or resource busy
Extracting system...
minzip: Can't create target file "/system/.supersu": Read-only file system
Not sure why it is happening. It does not happen on my surnia. You could try rebooting to recovery from the twrp power menu. I have seen this work before in strange cases. You don't need to flash the partitions again since you have already done so. Just boot to recovery, then reboot to recovery, then flash the rom. Sounds strange I know, but it may work.
-----------Flashing Rom Is In Your Own Risk-----------
Rom features:-
*G901FXXS1CQC1 Base.
*Deodexed.
*Knox stuff is removed.
*Stock Kernel included.
*Debloated some apps which can be downloaded from Playstore.
*C5 Keyboard.
*Mix Apps Stock & S7 & N7.
*S8 Sounds & Wallpapers & Touchwiz.
*DreamUX Theme UI.
*March Security Patches.
Installation:-
1. Download the rom and put it on your external SD card.
2. Reboot to recovery.
3. Now wipe Dalvik, System, Data, Cache.
4. Install the rom.
5. Install your variant Patch G906L/K/S.
6. Reboot and wait for 10 minutes+.
7. Enjoy the new version
Downloads:-
*ROM:
https://drive.google.com/file/d/0B3xtVwHkmfxzcUdaQ3Zod0VCY1k/view?usp=sharing
*UPDATED_G906K/S Patch:
https://drive.google.com/file/d/0B3xtVwHkmfxzUDFvRFRnb2lzSXM/view?usp=sharing
https://drive.google.com/file/d/0B3xtVwHkmfxzYjBUQkFCeXp2aTA/view?usp=sharing
*DreamUX SystemUI:
https://drive.google.com/file/d/0B3xtVwHkmfxzNlJWYTFSZkpxcmc/view?usp=sharing
Bugs:-
Credits:-
*Samsung for the Source
*Chainfire for the root access
*Kykint for porting guide
*tavatien86
*supergrobi94
Kindly hit thanks if you like this Rom here
I'm just a Noob V3 :laugh::victory:
XDA:DevDB Information
StockRom Port for lentils, ROM for the Samsung Galaxy S 5 Korean LTE-A, ROM for the Samsung Galaxy S5
Contributors
kardinal969
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP Recovery & 6.0.1 CPLx Bootloader
Based On: Touchwiz
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2017-04-11
Created 2016-05-24
Last Updated 2017-04-11
any screen shot ? Thanks u mate
hait.handle said:
any screen shot ? Thanks u mate
Click to expand...
Click to collapse
@hait.handle
Dear,
click on Discussion tab, then screenshot tab will appear click on it.
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
I'm fine with stock for now unless a stable aosp type rom becomes available.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
kardinal969 said:
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
Click to expand...
Click to collapse
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
bud7dha said:
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
Click to expand...
Click to collapse
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
kardinal969 said:
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
Click to expand...
Click to collapse
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
bud7dha said:
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
Click to expand...
Click to collapse
Problem noted and Patch fixed and being uploaded.
About off-topic, you need to reboot to recovery if using stock recovery and perform factory reset but beware all internal storage will be wiped.
Note: You dont need to remove battery always just use power button + volume down
Patch UPDATED and Fixed
Patch has been updated and fixed for G906K/S Variant.
Kindly feedback if any further issues.
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
my phone is G906S . now i'm on stock . more stable with me.
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
I need bootloader MM g906s.please help me
rm-223_bp said:
I need bootloader MM g906s.please help me
Click to expand...
Click to collapse
Hi dear,
this is the link for Bootloader
https://drive.google.com/open?id=0B3xtVwHkmfxzdy1CSGVlcnNnTTA
Seem private mode error ?
COOL
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Can i install xposed for G906S?
rm-223_bp said:
Seem private mode error ��
Click to expand...
Click to collapse
I don't use private mode but I will take a look at it.
Kindly please Pm (Personal Message) me and I can guide you step by step
fawadshah33 said:
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Click to expand...
Click to collapse
Thanks dear for your kind words, I will look into it soon. Thanks for the feedback
lvd0392 said:
Can i install xposed for G906S?
Click to expand...
Click to collapse
No you cant because this Stock Rom is Odex.
For xposed you need Deodex Rom
Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
rafjak said:
Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
Click to expand...
Click to collapse
Have you tried to re-flash your stock rom.
OGdroidster said:
Have you tried to re-flash your stock rom.
Click to expand...
Click to collapse
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
I had the issue too under cyanogen...
On mine i have disassambled the phone and maximized the gap between Mainboard and housing on the left... Then i fixed the screws again... Now the sim tray is sitting tighter! Only all two weeks i get this error again
Gesendet von meinem Moto Razr M mit Tapatalk
rafjak said:
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
Click to expand...
Click to collapse
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
OGdroidster said:
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
Click to expand...
Click to collapse
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
rafjak said:
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
Click to expand...
Click to collapse
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
OGdroidster said:
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
Click to expand...
Click to collapse
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
rafjak said:
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
Click to expand...
Click to collapse
use what ever recovery you want. If you run into problems you can use twrp to fix or repair certain things.
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
rafjak said:
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Click to expand...
Click to collapse
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
OGdroidster said:
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
Click to expand...
Click to collapse
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
rafjak said:
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
Click to expand...
Click to collapse
What version of TWRP are you using? If you told me already sorry just don't remember.
OGdroidster said:
What version of TWRP are you using? If you told me already sorry just don't remember.
Click to expand...
Click to collapse
2.8.6.0
Is there some newer one for XT926?
RJ
rafjak said:
2.8.6.0
Is there some newer one for XT926?
RJ
Click to expand...
Click to collapse
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
OGdroidster said:
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
Click to expand...
Click to collapse
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
rafjak said:
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
Click to expand...
Click to collapse
Mine doesn't reboot and has been optimized. Also try a different ROM to flash but like DU or Mokee there's plenty of other ones. But try changing system to ext4 first. Then flash. I gave you directions on that in post few minutes ago. Try it and see if it works.
Returning to the main topic of this tread.
I have noticed that when I have MOBILE DATA turn off
the restarts do not occur.
Regards
RJ
Is it possible to flash CM 11 via twrp 2.8.6.0?
Regards
RJ
I have found the solution of this issue.
The problem is with the FAST DORMANCY service.
When it is active but provider does not support it
it causes problem.
It should be disabled in the file /system/build.prop
ro.mot.ds.fastdormancy.disable=true
Regards
RJ
---- *NEW* MIUI 8 7.4.27 for HTC one m7 international ----
Just to help here
Link to download: https://mega.nz/#!35UBFAzb!06cuG9_6sxYQOCwSo4HACtD_bThqANkmqCYPtD31_IM
If someone have problems with downloading this just let me know!
Installation -
1. Download ROM and place it on your phone memory
2. Boot your phone in recovery mode (vol down + power)
3. Use standard wiping option
4. Install
Special greetings to NianRom who port this rom !
Have a nice day!
Cheers!
p
Wat abt sprint version
aroma installer
aroma installer freezes at 75.00%
great!!!
..hi...is this a nougat or marsmallow based rom?..chinese or global version?..thanks
JIMSHERIKO said:
aroma installer freezes at 75.00%
Click to expand...
Click to collapse
You need to have TWRP and Wipe Dalvik Cache, Cache, and Data first before you install this !!!
eaglefreewings76 said:
..hi...is this a nougat or marsmallow based rom?..chinese or global version?..thanks
Click to expand...
Click to collapse
It is 6.0.1 marshmallow
Great
Hi...thanks for your reply..but is this a chinese or global ROM?
eaglefreewings76 said:
Hi...thanks for your reply..but is this a chinese or global ROM?
Click to expand...
Click to collapse
Chinese version...
Peacemaker69 said:
You need to have TWRP and Wipe Dalvik Cache, Cache, and Data first before you install this !!!
Click to expand...
Click to collapse
still same
JIMSHERIKO said:
still same
Click to expand...
Click to collapse
Which model is your HTC m7 ?
Global rom
Thanks..I tried chinese miui 8 and I had problems with..as I changed language store, settings and themes didn't work good.. Sharing stuff is a confused way too cos it often takes u to use native chinese apps and chinese store...hard to handle!..so I was looking for the global one..
---------- Post added at 04:21 PM ---------- Previous post was at 04:16 PM ----------
JIMSHERIKO said:
still same
Click to expand...
Click to collapse
U have to get a total wipe..the only thing u don't have to wipe is the INTERNAL STORAGE..sometimes u could have to do it twice..
To the creator of this ROM - my device One m7 (int) hboot 1.61, TWRP 3.0.2.0
-Aroma installer is broken - after creating my own Aroma installer, rom installed without a problem.
-Camera app freezes preview after taking a photo,
-Hell lot of blotware
-Portable Hotspot crashes whole system (phone restarts)
It seems Aroma Installer is broken, because I have wiped everything and still don't work.
gpspl said:
To the creator of this ROM - my device One m7 (int) hboot 1.61, TWRP 3.0.2.0
-Aroma installer is broken - after creating my own Aroma installer, rom installed without a problem.
-Camera app freezes preview after taking a photo,
-Hell lot of blotware
-Portable Hotspot crashes whole system (phone restarts)
Click to expand...
Click to collapse
Well, aroma installer is okay to me. I really don't know why anyone have problem with aroma installer. I flash 10 times on 10 different phones and works without any problems...
Anyway, i think that maybe your phone model is not compatible or maybe your TWRP... Try with different versions and methods...
Let me know...
JIMSHERIKO said:
It seems Aroma Installer is broken, because I have wiped everything and still don't work.
Click to expand...
Click to collapse
Aroma cannot be broken. The problem is your phone model or TWRP...
All bugs I guess will be fixed in the next update... I find some minor bugs
Well aroma is broken, when people can't use it...
As i said - tested on twrp from 2.7.1.1 to 3.0.2.0 freezes at 75%, CWM same.
Phone wiped to the buttom of my soul - multiple times.
After cleaning in your rom .zip, and creating new aroma installer I was able to install rom.
And to you all who wants me to send it to you - nope. ROM is buggy as hell . I think it is just generic patchrom port.
gpspl said:
Well aroma is broken, when people can't use it...
As i said - tested on twrp from 2.7.1.1 to 3.0.2.0 freezes at 75%, CWM same.
Phone wiped to the buttom of my soul - multiple times.
After cleaning in your rom .zip, and creating new aroma installer I was able to install rom.
And to you all who wants me to send it to you - nope. ROM is buggy as hell . I think it is just generic patchrom port.
Click to expand...
Click to collapse
Well, thanks to know that. Keep your aroma installer for your self or you could help here someone if needs. Aroma installer is not broken. The problem is your phone I guess. Like I said, this rom has installed more than 10 times on 10 different phones and without any problems..
Search on google to find the reason why aroma installer stops on 75% while flashing.
Well... Hope you will resolve the problem then by yourself . The part of ROM porting is trying to find solution not telling everyone that your ROM is Perfect.
I guess your aroma missunderstud the catalogs. I've removed "NFC" from carrier folder and done some cleaning.
gpspl said:
Well... Hope you will resolve the problem then by yourself . The part of ROM porting is trying to find solution not telling everyone that your ROM is Perfect.
I guess your aroma missunderstud the catalogs. I've removed "NFC" from carrier folder and done some cleaning.
Click to expand...
Click to collapse
No, definitely not. This is not my ROM. But, I know that someone have different phone model or lack of knowledge with installing custom roms.. If you believe that Aroma installer is broken, why you not share any information about your phone ? Maybe the problem is your phone model
Anyway, this is not perfect rom but will be updated and fixed while if needs on the next update..
Cheers!
P
I Hope . My phone m7 international. Hboot 1.61. TWRP 3.0.2.0
gpspl said:
Well aroma is broken, when people can't use it...
As i said - tested on twrp from 2.7.1.1 to 3.0.2.0 freezes at 75%, CWM same.
Phone wiped to the buttom of my soul - multiple times.
After cleaning in your rom .zip, and creating new aroma installer I was able to install rom.
And to you all who wants me to send it to you - nope. ROM is buggy as hell . I think it is just generic patchrom port.
Click to expand...
Click to collapse
Can you send your version to me？email: [email protected]
Hi,
I requested my dear friend @Q9Nap to make a TWRP flashable zip of the full NPJS25.93-14-4 stock rom. At first this was meant for personal use only but still we decided to share it here. The zip contains all parts of a full stock ROM EXCEPT for the BOOTLOADER, PARTITION TABLE and STOCK RECOVERY! The files where ONLY tested on a European retail XT1642 dual sim 16GB variant (that's my device). Make sure you have a fastboot version of your stock ROM at hand in case something goes wrong. There are 2 zips: one is a full ROM (again: except for the recovery, bootloader and partition table), the other is the modem only.
One favour in return: please don't mirror these links.
Links:
Full zip
Modem only
Enjoy
(links updated)
will this replace TWRP with stock recovery?
full stock ROM EXCEPT for the BOOTLOADER and PARTITION TABLE
Click to expand...
Click to collapse
based on this the answer is "yes". Just wanted to make sure that is indeed the case.
thanks!
derausgewanderte said:
will this replace TWRP with stock recovery?
based on this the answer is "yes". Just wanted to make sure that is indeed the case.
thanks!
Click to expand...
Click to collapse
I'm sorry for mentioning this wrong. The answer is "no". so in other words: it does not contain the bootloader, patition table and stock recovery.
I will edit the info, thanks
Droidphilev said:
I'm sorry for mentioning this wrong. The answer is "no". so in other words: it does not contain the bootloader, patition table and stock recovery.
I will edit the info, thanks
Click to expand...
Click to collapse
Great, this is good to know. Thank you again.
edit: works on XT1644 with additional flashing of EX Kernel and SuperSU.
cheers
can you upload it to another host because mega has limited donwload data?
kushu said:
can you upload it to another host because mega has limited donwload data?
Click to expand...
Click to collapse
I will ask but cannot guarantee. I didn't upload them.
kushu said:
can you upload it to another host because mega has limited donwload data?
Click to expand...
Click to collapse
There is no limit. Downloading works fine.
kushu said:
can you upload it to another host because mega has limited donwload data?
Click to expand...
Click to collapse
Use megadownloader
fr3d0x said:
Use megadownloader
Click to expand...
Click to collapse
that mehod is not viable anymore thats why im asking for another host
kushu said:
that mehod is not viable anymore thats why im asking for another host
Click to expand...
Click to collapse
I have tried both on pc and on 2 android devices. All downloads worked just fine. Do you choose to see the desktop version of the site on android?
Droidphilev said:
I have tried both on pc and on 2 android devices. All downloads worked just fine. Do you choose to see the desktop version of the site on android?
Click to expand...
Click to collapse
Agree. Mega works fine. I always download MEGA app sign up for 50gb free account, and "IMPORT" the file over to my account, and then download from my account to minimize traffic issue with OP's MEGA account. Downloading via MEGA apps is much better than through web browser which is doable if you choose "DESKTOP VERSION" of the mobile web browser.
O.T. How do I root this stock rom. On the original "fastboot" stock rom install of NPJS25-93-14-4, I can "fastboot" install the rom, install ElementalX 1.04 stock type kernel, and SuperSU 2.82 zip in TWRP 3.1.0.0 and works fine for root. This rom however does NOT like ElementalX and won't boot with it. It won't boot with SuperSU 2.82 alone without ElementalX kernel either requiring restoring "boot" partition via TWRP to boot.
I'm on XT1644, Moto G4 Plus, Verizon carrier, 4gb/64gb, 128gb SDXC
HueyT said:
O.T. How do I root this stock rom. On the original "fastboot" stock rom install of NPJS25-93-14-4, I can "fastboot" install the rom, install ElementalX 1.04 stock type kernel, and SuperSU 2.82 zip in TWRP 3.1.0.0 and works fine for root. This rom however does NOT like ElementalX and won't boot with it. It won't boot with SuperSU 2.82 alone without ElementalX kernel either requiring restoring "boot" partition via TWRP to boot.
I'm on XT1644, Moto G4 Plus, Verizon carrier, 4gb/64gb, 128gb SDXC
Click to expand...
Click to collapse
I have no idea what can be the reason. I am emptying my phone now and will give it a try.
Hi,
@HueyT: rooting works fine here. Her's what i did in detail. Let me know if it worked for you also.
-flash rom
-boot rom and go through initial setup
-boot to recovery and flash Elemental
-reboot to rom (i dont knwo if this and next step can be avoided)
-reboot to recovery
-Flash Magisk V12
-reboot to rom
-install Magisk Manager 3.1.1
-open Magisk manager
-open a filemanager. it will ask for root.
Writing to /system won't work but it has nothing to do with this rom particular. All debloated stock roms have the same problem.
Droidphilev said:
Hi,
@HueyT: rooting works fine here. Her's what i did in detail. Let me know if it worked for you also.
-flash rom
-boot rom and go through initial setup
-boot to recovery and flash Elemental
-reboot to rom (i dont knwo if this and next step can be avoided)
-reboot to recovery
-Flash Magisk V12
-reboot to rom
-install Magisk Manager 3.1.1
-open Magisk manager
-open a filemanager. it will ask for root.
Writing to /system won't work but it has nothing to do with this rom particular. All debloated stock roms have the same problem.
Click to expand...
Click to collapse
Thanks, these steps worked !!!!
Does one in mm stock via twrp?
I m using rr the custom rom...so should I flash modem only or fulll zip....
abhishek garg1 said:
I m using rr the custom rom...so should I flash modem only or fulll zip....
Click to expand...
Click to collapse
It's always better to go back to Nougat Stock like this, make sure all sensors, GPS, 2G/3G/4G/WiFi work and then flash custom rom, Gapps, and root.
HueyT said:
It's always better to go back to Nougat Stock like this, make sure all sensors, GPS, 2G/3G/4G/WiFi work and then flash custom rom, Gapps, and root.
Click to expand...
Click to collapse
I m asking should i flash modem only or full zip to get a rom use. .. currently i m on custom rom
abhishek garg1 said:
I m asking should i flash modem only or full zip to get a rom use. .. currently i m on custom rom
Click to expand...
Click to collapse
What are you trying to achieve, are you trying to update your modem or are you trying to flash back to the stock/near stock Motorola ROM?
Yes i wanna flash this rom using custom recovery....so should i download modem or full zip