Related
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Personal Thanks to Andy, Mik_os, Franciscofranco, Ciaox, Noejn and all other devs.
AmonRA to flash it with the need to disable the verification of signatures.
Overclocking
Smartass
Smoothass
Cifs
Supports EXT4
+upstream to 2.6.35.13
+oc, interactive, smartass, smoothass, cifs, ext4
+governor added SavagedZen
+autogroup scheduler (the patch of 200 lines)
+ smoothass smartass with a capped rate (standby) to set minimum
V3 Kernel -Old kernel:
ADB Bugfix for device
Reconfigured various kernel parameters (For better power management, CPU profiles)
-Added for the inversion axes Sippola in the new touch screen driver.
-Simple-inserted I / O scheduler (sio)
-Included various other patches 5-6
-Removed references-debug (smaller kernels)
-Small fix to reduce the impact on the CPU more pressure on the display (you can check with Neocore first ... the difference came in 8-well 9fps now settles down to 2-3fps)
******Updated 25 July*********
Magazine-routine to increase the stability and overclocking performance, cameraflick is absent up to 729mhz
Touch-fix which decreases the occupation of the CPU when you press your finger on the display (should no longer have the lag that had the first version of V4 (I hope))
Magazines-and reinsert all the previous patches (66 patches in total)
Inserted by the kernel-2.6.36 backport of block, and mtd workque
Backport-inserted by the kernel 3.0rc6 and cpufreq of cpuidle
http://www.mediafire.com/?g8r37pzsr3ig21j
+same kernel but without the fix for employment cpu (maybe better in the scroll lag if you have one) **No touch fix kernel***
http://www.mediafire.com/?bed0ht9kcz0071c
******Updated 08 Aug*********
Touch V6 2.6.35.14
V5-like, but updated to version 2.6.35.14
-Added 2.6.36 kernel backported from the i2c
-Support Module tun.ko
-Vsync enabled
http://www.mediafire.com/?otpne0w1v8bhnp8
If you want to try the version NoTouch kernel
http://www.mediafire.com/?4wuiscjcu5xal58
After flashing, wipe cache and davlik.
If you have a2sd then run the following in terminal:
su
a2sd cachesd
The phone will reboot automatically.
Download Ringing with No fade :Now supports Gingerbread 2.3.3 :
http://www.mediafire.com/?1xqcc0jppl2w9ic
Flash and enjoy
To know more the original idea, please visit the thread here :
Special Thanks to Januka for the idea.
For devs :
I/Paolo doesn't have a repository, So its uploaded here :
Kernel Ginger Source
http://d-h.st/jvn
u only need to change one line in Makefile
at line 193 change from
Code:
CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- #CROSS_COMPILE ?= arm-eabi-
to
Code:
#CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- CROSS_COMPILE ?= arm-eabi-
Yes, I know I should use search, but please, can anyone explain to me how do smartass and smoothass work in comparison to, for example, conservative and ondemand?
And massive thanks to you mansirawat!
If you already know that you should use the search function, maybe you don't know HOW to use it...
Here's a "tutorial": http://lmgtfy.com/?q=android+governors
Otherwise, you're just plain lazy... which one is it?
Ciaox should see this thread , he is waiting for GB OC Kernel
P.S : Thank you for the Kernel
Otherwise, you prefer wasting perfectly good post space in order to lecture me. Just like half the members of XDA. And the fact that you supposedly come from Romania as well just shows...nah, why bring that up here, all foreigners know it already.
Great! Awesome! Pure awesome!
Thanks a lot!
Stock rooted GB with this kernel (652/320)-> 1152 in quadrant. I don't care too much about those points, but my phone is smoother.
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
do i have to flash a new baseband before flashing this on any custom rom? thanks
Flashed it,let's see!
Thanks!
Best!
Great!
Awesome!
Pure awesome!
mansirawat said:
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Overclocking
Smartass
Smoothass
Cifs
Doesn't support EXT4
Click to expand...
Click to collapse
Hey mansi hows the performance??? If its good then it will be included in my new ROM.
CWM can also be used to flash this zip. Tested(CWM 3.1.0.0) and worked.
sajjan said:
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Why would you use this on a custom rom? We have Francisco's kernels for that.
devlin2427 said:
Why would you use this on a custom rom? We have Francisco's kernels for that.
Click to expand...
Click to collapse
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Well I tried it out of curiousity ....and if not better it's definitely at par.....I still have to check battery life....
Sent from my LG-P500 using XDA App
cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
does this kernel require a new baseband?thanks
roi14 said:
does this kernel require a new baseband?thanks
Click to expand...
Click to collapse
Yes, of course.
cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
devlin2427 said:
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
Click to expand...
Click to collapse
ya you can use franco's kernel on any custom ROM other then those which are built from official 2.3.3
doktornotor said:
Yes, of course.
Click to expand...
Click to collapse
No. kernels have nothing to do with baseband. I flashed on v20g and its improved performance and another guy flashed on void forever and it improved performance.
Hello Guys, I would like to present you my first SGY kernel which I have compiled from source. This is only for Stock or Stock based ROMs.
Features :
1) Loads of governors like userspace,ondemand,powerspace,conservative etc. so that users will not get biased towards only one configuration
2) I/O schedulers like noop and cfq with cfq as a default scheduler
3) Max frquency 832 Mhz and min frequency 312 which I found the best in terms of battery and performance because Overclocking decreases the life of Phone.
I am currently lookoing forward to add Extra I/O Schedulers although cfq is best out there with Conservative governors in my opinion. CPU underclocking will be in my roadmap as well. I hope you guys will appreciate me.
Steps for Installing/Flashing :
1) First reboot into recovery and flash any CWM recovery(Note: don't flash it through stock recovery directly)
2) Go to mounts/Storage and mount everything system,cache,sd-card
3) Now flash the Zip I have provided
4) Now Wipe cache partition from Main menu
5) from Advanced option-> wipe dalvik cache and reboot
I have tested it myself.Please report in case you guys run into any issues.
Credits :
To me Of course
@google
@samsung for providing kernel source
GitHub :
https://github.com/lokesh3440/Galaxy_Y_Stock_Kernel
Kernel Sources :
https://github.com/lokesh3440/Galaxy_Y_Kernel_Source
Changelog:
V2 Build execution is in Progress.......I just checked. V1 works pretty well with Hyperion V9.
Initial Build
Here are few Screenshots :
Don't forget to submit logcats in case you run into any issues.
Testing now...
Sent from my GT-S5360 using Tapatalk 2
İ will test it
Sent from my GT-S5360 using xda app-developers app
Initial impressions
1)Performance seems decent.
2)No support for amarulzz a2sd
3)No CWM integrated
4)Deepsleep not working.
Cant talk about battery so soon.
Sent from my GT-S5360 using Tapatalk 2
Souroking said:
Initial impressions
1)Performance seems decent.
2)No support for amarulzz a2sd
3)No CWM integrated
4)Deepsleep not working.
Cant talk about battery so soon.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
I will add amarullz a2Sd support and integrated CWM recovery very soon. I still need to check why deep sleep isn't working. Thanks for feedback.
lokesh.3440 said:
I will add amarullz a2Sd support and integrated CWM recovery very soon. I still need to check why deep sleep isn't working. Thanks for feedback.
Click to expand...
Click to collapse
İ'm waiting for CWM
Sent from my GT-S5360 using xda app-developers app
Hello,
According to XDA Rule on GPL and Apache Compilence
For kernel developers: You must provide FULL source code, not just the edits you made (reference here). Your source code must also be up-to-date with any binary releases. If in doubt, update your github first, then release the binary, NOT the other way round.
Click to expand...
Click to collapse
the stuff you have provided on your github is only the kernel.
You have to upload the whole source code you've used while compiling this kernel.Do it ASAP if you didnt knew it.Or your thread will be closed soon.
Take this as a suggestion :good:
Regards.
DC07 said:
Hello,
According to XDA Rule on GPL and Apache Compilence
the stuff you have provided on your github is only the kernel.
You have to upload the whole source code you've used while compiling this kernel.Do it ASAP if you didnt knew it.Or your thread will be closed soon.
Take this as a suggestion :good:
Regards.
Click to expand...
Click to collapse
Thanks for your suggestion brother. This is my first contribution,that's why i wasn't aware of it. Do you mean the Samsung open source update which i have used to compile it ?
can you guide me how exactly i need to update it ?
deep sleep is present in stock kernel too.
only states files is not enabled/present.
if cpu spy is displaying freq. usage and deepsleep is notshowing up then there is some problem.
else by default its enabled in stock kernel.
Nitzz said:
deep sleep is present in stock kernel too.
only states files is not enabled/present.
if cpu spy is displaying freq. usage and deepsleep is notshowing up then there is some problem.
else by default its enabled in stock kernel.
Click to expand...
Click to collapse
But CPU spy says "kernel is not compatible".......
lokesh.3440 said:
Thanks for your suggestion brother. This is my first contribution,that's why i wasn't aware of it. Do you mean the Samsung open source update which i have used to compile it ?
can you guide me how exactly i need to update it ?
Click to expand...
Click to collapse
in simple words,upload your whole directory i.e common and modules of your modified samsungopensource folder :good:
DC07 said:
in simple words,upload your whole directory i.e common and modules of your modified samsungopensource folder :good:
Click to expand...
Click to collapse
Thanks, I will upload it on my github in the evening.
Well anybody tried compiling the kernel on Ubuntu 14.04? Gonna try it today! xD
lokesh.3440 said:
But CPU spy says "kernel is not compatible".......
Click to expand...
Click to collapse
check again.
its says- states file not found.
kernel is not compatible with that app cz freq. states file is disabled by default.
but deepsleep is enabled in kernel.
also the kernel u build is having old source.
latest kernel from samsung in update like dxmj is best n having many changes.
just add init.d support in it and compare the battry life with ur kernel.
and that stock one is far more stable than urs.
no offense
but untill and unless u add some more features in it, stock kernel will still be my preferred choice.
add more featrs into it to make it better than stock one.
aniket.lamba said:
Well anybody tried compiling the kernel on Ubuntu 14.04? Gonna try it today! xD
Click to expand...
Click to collapse
I have built it on ubuntu 14 only
Sent from my GT-I9505 using Tapatalk
lokesh.3440 said:
I have built it on ubuntu 14 only
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
You serious?
That's good.Gonna try soon!
Good one... :good:
the problem is it seems to have update2 source.... :-/
can run newer firmwares (ddmd,dxmj, etc).
Looking forward to this one. Please use update3 in the next one. Best of luck
P.S. As @Nitzz Said, Deep sleep is pre-included. if u have used the defconfig command, it is included in the kernel. try adding cpu_stats file...
Nachiket.Namjoshi said:
Good one... :good:
the problem is it seems to have update2 source.... :-/
can run newer firmwares (ddmd,dxmj, etc).
Looking forward to this one. Please use update3 in the next one. Best of luck
P.S. As @Nitzz Said, Deep sleep is pre-included. if u have used the defconfig command, it is included in the kernel. try adding cpu_stats file...
Click to expand...
Click to collapse
@nachiket,,,I have used Update 3 only,,,,but i forgot to add cpu stats file i guess.......It will be included in the next build. Thanks for your suggestion
lokesh.3440 said:
@nachiket,,,I have used Update 3 only,,,,but i forgot to add cpu stats file i guess.......It will be included in the next build. Thanks for your suggestion
Click to expand...
Click to collapse
see..
told ya.
u can ask anyone of us(senior membrs of sgy section) or anyother kernel dev for help or any doubt if u want.
About RockZ1L : http://forum.xda-developers.com/sony-xperia-z1-compact/development/5-0-rockz1l-kernel-t3101784
This is a personal build of rockz1l with some modifications :
* Bump kernel version to 3.4.110 (include most patches from upstream)
* Add UKSM(Ultra Kernel Same-page Merging), better than the original KSM approach.
* Add f2fs support. You can follow this tutorial to convert your partitions to f2fs : http://forum.xda-developers.com/xpe...rial-migrate-filesystem-to-f2fs-ext4-t3004755
* Add sdcardfs support
* Enable TCP Hybla
* Modified and built with Hyper Linaro ARM-EABI 5.1
* Add cifs and nfs modules
* Replace tuxera exfat with exfat-nofuse (the module fakes itself as a texfat module)
* Add Paragon UFSD
* Disable vermagic check for kernel modules
The kernel is for stock lollipop rom. Only tested on 14.6.A.1.236
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fYkYxWGpldEMtb1E&usp=drive_web
Sourcecode : https://github.com/maz-1/android_kernel_sonyz_msm8974
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel?
Sent from my D5503 using xda premium
Frunzdoedel said:
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
I think Taiko Audio Codec Control and qpnp-vibrator are already in RockZ1L kernel.
Frunzdoedel said:
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel?
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
I'm far away from a developer, but mayby you have a look at:http://forum.xda-developers.com/showthread.php?p=60428881??
Sent from my D5503 using xda premium
Amazing
Nice work:good:, thanks OP and which governer do you recommend for performance and good battery life?
baris27 said:
Nice work:good:, thanks OP and which governer do you recommend for performance and good battery life?
Click to expand...
Click to collapse
Alucard/ noop / and deadline for sd ext..
And alucard CPU Hotplug.
Is the best choice for performance/battery live for me (a little bit UV too)
?
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
dennis46419 said:
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
Click to expand...
Click to collapse
I haven't tried since I'm not currently on stock, but I notice the download folder says 'Z1l_Z1c', but all the files only say 'Z1l'. I wonder if he removed Z1c files...
Yes thats right.. I dont See IT
What Rom You Use?
Well i flahed the zl folder on my z1 compact and it works very well
On Stock Rom?
@maz-1,
i want to ask you if you have an idea why i can t overclock my device
i can t apply 2.4 GHZ frequency.
does it have to do with SE linux ?
Sorry, no idea when i tried this kernel i had no problem to apply 2.41 GHz with kernel auditor. But i prefer http://forum.xda-developers.com/showthread.php?t=3096060
[KERNEL][Z1C][5.0-5.1][F2FS] Advanced-Kernel v16.0[11/16/2015]
Sent from my D5503 using xda premium
Frunzdoedel said:
Sorry, no idea when i tried this kernel i had no problem to apply 2.41 GHz with kernel auditor. But i prefer http://forum.xda-developers.com/showthread.php?t=3096060
[KERNEL][Z1C][5.0-5.1][F2FS] Advanced-Kernel v16.0[11/16/2015]
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
same thing happens with this kernel also
broky said:
same thing happens with this kernel also
Click to expand...
Click to collapse
Mayby your device is very special? ?
Sent from my D5503 using xda premium
broky said:
same thing happens with this kernel also
Click to expand...
Click to collapse
Are other signs of the kernel showing up, (additional governors, etc.)? Maybe it's just not flashing right.
levone1 said:
Are other signs of the kernel showing up, (additional governors, etc.)? Maybe it's just not flashing right.
Click to expand...
Click to collapse
yes,everything seems to appear as it should,except the highest frequency..
broky said:
yes,everything seems to appear as it should,except the highest frequency..
Click to expand...
Click to collapse
Never heard of it... I know that the original Rockz1 kernel comes with an app called 'pimp my Z1c' or something like that. Maybe you could pull the app out of the zip and install it, see if it shows anything different.
levone1 said:
Never heard of it... I know that the original Rockz1 kernel comes with an app called 'pimp my Z1c' or something like that. Maybe you could pull the app out of the zip and install it, see if it shows anything different.
Click to expand...
Click to collapse
already tried this,same result.
anyway problem seems to be solved using trickster mod
dennis46419 said:
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
Click to expand...
Click to collapse
run "getprop ro.product.device" in recovery. Does it give you "amami" or "D5503" ?
in short it's defatted beacon.
@riteshsaxena kernel + my cpu&gpu modifications. and it's all.
test it.
(oreo!)
settings will come later.
thx to @riteshsaxena
XDA:DevDB Information
kernel-R, Kernel for the Xiaomi Redmi 3S
Contributors
difr
Kernel Special Features: underclock, overclock, undervoltage, overvoltage
Version Information
Status: Beta
Current Beta Version: 1
Created 2018-01-07
Last Updated 2018-01-07
Log??
@dedikunity, yes.
07.01.2018:
first beta release.
backup boot before flashing. restore backup, if something will go wrong
Cpu Freq??and online cores??
@sandip691, yes.
lowest is lower and highest is higher stock's freqs.
"online cores" - it's settings. will come later
Congregations @difr for your new kernel for our 'land'. Do not stop working until hardware stop supporting.
Woohoo the kernel king is back!
Anyone tried?
Well done
"- oreo" it means"Not Oreo"?
@difr sir, if possible post some kernel settings for good battery life.. will flash it tomorrow!!
It's too laggy
andrexp31 said:
"- oreo" it means"Not Oreo"?
Click to expand...
Click to collapse
thats mean for Oreo lmao
How do i tweak them?
Mean overclock cpu+gpu???
Help needed man,i'm ignorent about it????
Nurujjamanpollob said:
How do i tweak them?
Mean overclock cpu+gpu???
Help needed man,i'm ignorent about it
Click to expand...
Click to collapse
at qualcomm user can't really tweak it, levels are builded in kernel.
you can tweak only modules' settings, ie ways how to use these levels.
use "kernel adiutor" or "3c toolbox"
difr said:
at qualcomm user can't really tweak it, levels are builded in kernel.
you can tweak only modules' settings, ie ways how to use these levels.
use "kernel adiutor" or "3c toolbox"
Click to expand...
Click to collapse
Any way to modify kernel value???
Nurujjamanpollob said:
Any way to modify kernel value???
Click to expand...
Click to collapse
yes, modify sources and make kernel.
difr said:
yes, modify sources and make kernel.
Click to expand...
Click to collapse
But i Have A Idea!
But i Thinks, its stupid However i don't know About Kernel!!!
Ha ha ha If You Don't mind,i Suggested you to use aroma installer for your kernel,with gpu+cpu+another customization value,its good idea or not!!!
I'm sorry if i say wrong???
Need one more build bro....
U r good ....keep it up:good:
Sabir Ali Raja said:
Need one more build bro....
U r good ....keep it up:good:
Click to expand...
Click to collapse
not here now, sorry
https://yadi.sk/d/4CkziMfA3Rqzch
btw kernel in this rom is also very good
Kernel+
for [email protected]
overclock, underclock, voltage optimization, config tuning.
more economy, more performance,
more efficiency.
!t's native Xiaomi's kernel (miui_HM3SGlobal_V9.6.1.0, not rebuilded) with some modifications.
install zip in twrp, !!! backup boot and system first (restore if you dont like)
cpu_tuning-difrED_v2_MIUI-MM_land.zip
XDA:DevDB Information
cpu_tuning-difrED (MIUI-MM), Kernel for the Xiaomi Redmi 3S
Contributors
difr
Kernel Special Features:
Version Information
Status: Beta
Created 2018-09-05
Last Updated 2018-09-05
Support d2tw?
I'm also curious to know if the dt2w is present in this kernel?
Also with latest miui 10 audio quality got so much worst
now audio through earphones is hardly audible in noisy environment.
would also like to know if audio gain included or not.
Thank you sir for your work. if possible plz add d2w feature because it is very imp for redmi 3s user like me .
Any instructions you wanna share??
Work like a charm on Miui 7.5.8.0
Let me see the battery backup after a circle of full charge..
Battery seem good and promissing..
at least one sensible review, thanks @Rukijo
but show me your kernel adiutor screen
ps: dt2w and other features will be not implemented.
its not compiled by me kernel. its native Xiaomi's. edited by me.
so only cpu related things.
difr said:
at least one sensible review, thanks @Rukijo
but show me your kernel adiutor screen
ps: dt2w and other features will be not implemented.
its not compiled by me kernel. its native Xiaomi's. edited by me.
so only cpu related things.
Click to expand...
Click to collapse
What's the max cpu & gpu freq in this kernal??
can you confirm me that i can play asphalt 9 smoothly in miui without this kernal??
Because default kernal in miui sucks in gaming
Confirm me about gaming
So i will flash and use this kernal in miui 10
And i will teste your next releases
Thank you
difr said:
at least one sensible review, thanks @Rukijo
but show me your kernel adiutor screen
ps: dt2w and other features will be not implemented.
its not compiled by me kernel. its native Xiaomi's. edited by me.
so only cpu related things.
Click to expand...
Click to collapse
Here the ss of kernel adiutor
Rukijo said:
Here the ss of kernel adiutor
Click to expand...
Click to collapse
Can u tell me what's the. Max gpu frequency??
Rahul Dilwale said:
Can u tell me what's the. Max gpu frequency??
Click to expand...
Click to collapse
gpu is not changed. it needs code changes.
difr said:
gpu is not changed. it needs code changes.
Click to expand...
Click to collapse
Any difference in gaming ???
Asphalt 9??
Rahul Dilwale said:
Any difference in gaming ???
Asphalt 9??
Click to expand...
Click to collapse
must be
you write
good work broh just for information did you added any gov into kernel?
Is there the possibility of putting the 8 cores to work at the same time? Miui usually leaves only 6 cores working. Another thing, will later be added gpu OC or not?
Rukijo said:
Here the ss of kernel adiutor
Click to expand...
Click to collapse
How's gaming rukijo??
Azzkaran said:
good work broh just for information did you added any gov into kernel?
Click to expand...
Click to collapse
CPU and GPU governor is present..
mohsin.kadiwala said:
How's gaming rukijo??
Click to expand...
Click to collapse
Much better than stock miui kernel.
Rukijo said:
CPU and GPU governor is present..
Click to expand...
Click to collapse
Okey broh thanxx cpu with stock governor but need one more blu_active add it
Then I'll tell you some settings or tweak to get better battery life with performance..
---------- Post added at 04:38 AM ---------- Previous post was at 04:34 AM ----------
Hey dev can you share some details for interactive like i want to change bias or anything can i tune it ?