Hi guys, i've had s6 for the past 7 months and only recently i have noticed small specks of dust under the camera lens. Two of them are on the blue lens surface itself! They are very minute and will be visible under direct sunlight or bright light. Have seen this is another phone as well. I'm yet to find out whether this affects the images but just wanted to know whether this is prevalent. Did any of you have noticed it? does it affect your images?
Related
Just noticed that when things are in the top portion of the picture with the camera tilted down slightly things get distorted. It makes heads oblong and alien looking. Wondering if other people have this same issue or if it's just my phone. So it's really a question of whether the phone is being exchanged or returned.
I've attached two pics. When the tv is in the top portion of the pic it looks a lot taller than when it's in the center of the pic. Both pics were taken from the same distance at the same zoom amount.
Did you take the plastic film off the lens that comes from the factory?
s197 said:
Did you take the plastic film off the lens that comes from the factory?
Click to expand...
Click to collapse
I was gonna say the same! Although mine lately has not been focusing at all unless i shake it. View is immediately blurry, but up close to something it is fine. Like it is stuck in close up. Shake it and seems good. This is before ROOT and playing around. Any ideas?
s197 said:
Did you take the plastic film off the lens that comes from the factory?
Click to expand...
Click to collapse
Did you have a plastic film on your camera? I had one over the fingerprint sensor but if there is one on my camera it's near impossible to detect, I feel like I'm just scratching at the glass although my fingernail is definitely catching on something. I just cant tell if it's the edge of the glass for the camera or a film covering it.
i had the same issue so i boiled my kettle, and held the phone above it after it boiled and let the steam peel the lense sticker.
omgi0wn said:
Did you have a plastic film on your camera? I had one over the fingerprint sensor but if there is one on my camera it's near impossible to detect, I feel like I'm just scratching at the glass although my fingernail is definitely catching on something. I just cant tell if it's the edge of the glass for the camera or a film covering it.
Click to expand...
Click to collapse
If you had the plastic on it, you'd know it. It was very noticeable on mine.
droidiac13 said:
If you had the plastic on it, you'd know it. It was very noticeable on mine.
Click to expand...
Click to collapse
I really can't tell if it's there, if it is it lines up almost perfectly. It isn't causing me issues for now though so I'm not going to mess with it.
omgi0wn said:
I really can't tell if it's there, if it is it lines up almost perfectly. It isn't causing me issues for now though so I'm not going to mess with it.
Click to expand...
Click to collapse
You would notice in the center of the lens. The plastic would have a cut. Once it's off, the lens is perfectly flat across the top.
The plastic was still on, but no change in distortion taking it off. I'm guessing the cutout in the center of the plastic makes it so it doesn't impact photos.
So I tested on my computer monitor and am able to somewhat replicate what is happening in your shots. However, this distortion is natural because you're tilting the camera downwards on its axis. Its called perspective lens distortion and is common to all cameras without a tilt shift lens (a lens that costs several thousand dollars). You should be able to replicate the effect with any camera phone.
Yeah I've noticed distortion in other cameras but it's just not so extreme. On the s6 the distortion makes any pics with the subject on the edge ridiculous and unusable.
I think I've narrowed it down to when the s6 is set up to shoot max resolution at 16:9. When I switch it to 4:3 the distortion is pretty much gone since that distorted area is just cropped out but that reduces it from 16mp to 12mp. Other phone cameras I've had (moto x 2nd gen and s3) crop the other way (max resolution at 4:3 and then crop to get 16:9).
So the s6 presumably has a 16:9 sensor where the others had 4:3. But the extra width is pretty much unusable.
I'm not sure how I feel about this. What's the point of having a 16mp camera if you can only effectively use 12mp?
Any update on this? I was hoping there's a post processing software in Android/Windows/OSX that can compensate for the lens distortion even though it'll reduced the resolution a bit. I have a AT&T Galaxy S6.
I tried DXO Optics Pro 8, and it works very good for shots from my Nikon D7000 to un-alienize the faces, but there are no modules for the Galaxy S6 lens.
So, I got The camera lens on my s6 fixed at a local repair. I made That decison because every charged me like 250 euro(286 dollars) for repair. So, I got it fixed for 50 euro(Huge drop in price, I know). After I got it fixed, my photos turned out to be Blurry. When I broke The camera lens I also noticed That The camera had also got scratched, but I still could got some decent shots, without The cameralens.
I also noticed That The new camera lens got a hq logo in left upper corner. I inmediately thought...this is not an original Samsung part. But my question is: does The scratched camera create Blurry pictures or is because The cameralens isnt a original Samsung part?
I also have some example pictures shot with The new cameralens. I also shot some.with my girlfriends s6.
http://imgur.com/lvMJJQH
http://imgur.com/CGfckxB
Kwamekwanzaa said:
So, I got The camera lens on my s6 fixed at a local repair. I made That decison because every charged me like 250 euro(286 dollars) for repair. So, I got it fixed for 50 euro(Huge drop in price, I know). After I got it fixed, my photos turned out to be Blurry. When I broke The camera lens I also noticed That The camera had also got scratched, but I still could got some decent shots, without The cameralens.
I also noticed That The new camera lens got a hq logo in left upper corner. I inmediately thought...this is not an original Samsung part. But my question is: does The scratched camera create Blurry pictures or is because The cameralens isnt a original Samsung part?
I also have some example pictures shot with The new cameralens. I also shot some.with my girlfriends s6.
http://imgur.com/lvMJJQH
http://imgur.com/CGfckxB
Click to expand...
Click to collapse
What is the difference between the scratched "cameralens" and "camera"?
You mean the actual lens is scratched and also the big rounded square protective glass?
Well, in case a not quality replacement part was used, it can have an effect on the overall picture quality.
camera lens
davebugyi said:
What is the difference between the scratched "cameralens" and "camera"?
You mean the actual lens is scratched and also the big rounded square protective glass?
Well, in case a not quality replacement part was used, it can have an effect on the overall picture quality.
Click to expand...
Click to collapse
can you make a macro pic with flash? and pics on street to see more pics please?¿ clean your lens too
sorry for my poor english ( i am spanish ):good:
Sometimes in low indoor lighting I noticed some dark blobs that appear on the camera. They look like rather large particles scattered throughout the frame. I was suspecting maybe dust in the lens but I've seen a similar thing with my friend's Nexus 4 when is directly cast in sunlight - similar to when you look under a microscope and your hair eyelashes are in the way. Another thing I suspect it could be is some interference from the shiny black plastic ring within the camera lens (not the silver ring outside), as it appears to be made of a rough plastic-like material.
Sample (there are many more depending what angle the light is shining): https://www.dropbox.com/s/zm8h9jp3jhdy726/DSC_0476.JPG?dl=0
Has anyone experienced this as well?
Note that the lens/camera module that was replaced by Sony in Taiwan due to the left blur problem. They assured me that the phone was still waterproof. Unfortunately I am no longer in Taiwan so I can't get it repaired. In most situations the blobs are not visible but I do notice them when I'm filming in my room and the camera appears to be trying to pick up more light.
hmm, now that i look at my lens, i it appears there is a spot on the actual camera lens behind the main lens cover. Either dust got in during the lens replacement process, or it somehow got in later. So much for IP68 =/
Can you send it back and get a new device?
Lambo16 said:
Can you send it back and get a new device?
Click to expand...
Click to collapse
Nope, I bought it in Taiwan, and am studying overseas now. Perhaps next time I go to Taiwan I will turn it in. It's not a huge problem as none of my outdoor photos seem to have this problem - I only noticed it in videos I filmed in my room indoors with a certain lighting or flare (if you cover the light a bit it's gone, like you have a lens hood). It's not as obvious as previous reports of dust in the Xperia Z lens etc.
I looked into it with a magnifying glass and it does seem like there is at least one speck behind the lens cover.
Maybe there was some dust or paper in my pocket that somehow got in, but I had the phone in a case, and there's a rear protector film I applied that goes around the lens
Hi Guys,
The pictures and videos from the rear camera of my 6045K were getting increasingly muddy and lacking in contrast This is a picture taken with the rear camera and this is the same scene taken with the front camera. This is just another example of how bad things got at some point. It turns out there is some kind of dust accumulated on the inside of the protective glass in front of the lens - it may be seen against bright light falling on the lens at certain angle. Since there is no way to open the rear of thee phone and clean I had it clean by a service but it seems that dust is starting to accumulate once again - just a few days after it has been cleaned up. Few days is also how long it took after dust to appear when I first purchased the phone.
My question is - is it just bad design (have you noticed anything like it on your phones) or just a single case and a bad luck? Also, do you know how difficult it is to open the back cover as I am not willing to send my phone to a service for a week every few weeks.
Thank you,
Peter
The more I read, the more it seems that P7P users have got a bad Lens Flare issue on the X1 Lens.
Out of curiosity, how many users here have the issue themselves?
I used to have the Mate 20 Pro for 4 years and the Lens Flare wasn't that bad in comparison to the P7P.
I'll add that I don't have a lens cover over my cameras and the glass is clean.
Everyone, that's just the nature of the beast.
1gavinr said:
The more I read, the more it seems that P7P users have got a bad Lens Flare issue on the X1 Lens.
Out of curiosity, how many users here have the issue themselves?
I used to have the Mate 20 Pro for 4 years and the Lens Flare wasn't that bad in comparison to the P7P.
I'll add that I don't have a lens cover over my cameras and the glass is clean.
Click to expand...
Click to collapse
That's not an "issue", everyone has the lens flare. It only depends on the light angle and how it hits the lens.
It's pretty bad. I took some comparison photos with my S21 before I sent it in for trade and the flare was awful. And non-existent on the Samsung photos.
This was taken with a Canon DSLR and a £2000 Canon L lens, there are always circumstances where it is going to happen.
issasaurus said:
It's pretty bad. I took some comparison photos with my S21 before I sent it in for trade and the flare was awful. And non-existent on the Samsung photos. View attachment 5762543View attachment 5762541
Click to expand...
Click to collapse
Different focal lengths though so not a fair comparison.
MrBelter said:
This was taken with a Canon DSLR and a £2000 Canon L lens, there are always circumstances where it is going to happen.
Click to expand...
Click to collapse
If it happens in some circumstances and only once in a while, its OK. But I think p7p has a permanent problem.
One request for folks who experience it: can you try a case (or any other way) which covers most of the aluminum? I think the reflections off the aluminum are adding to the flare phenomenon.
IMO, going with shiny metal around the lens was not a smart choice by google. Get the wrong curves on that part and it can mess with the light that goes into the lens.
devsk said:
If it happens in some circumstances and only once in a while, its OK. But I think p7p has a permanent problem.
One request for folks who experience it: can you try a case (or any other way) which covers most of the aluminum? I think the reflections off the aluminum are adding to the flare phenomenon.
IMO, going with shiny metal around the lens was not a smart choice by google. Get the wrong curves on that part and it can mess with the light that goes into the lens.
Click to expand...
Click to collapse
It does only happen in some circumstances though and only once in a while on the Pixel 7 Pro to be fair and those circumstances are using the 1X lens while it pointing it at something very bright and this is when lens flare is always a risk.
The problem is a lack of any anti reflection coating on the glass covering the lens, it is just plain glass sadly. I have wondered if we could use something as a lens hood which should help dramatically with the issue as it stops light from falling across the lens.
FWIW i have a black skin over my camera bar, it certainly made a difference one the P6P but it makes no difference whatsoever on the P7P
Using a different focal length other than 1X the problem is much, much less noticeable.
I see the issue across all lenses. That's why I think its the metal, not the lenses or the glass covering the lenses!
Any kind of coating will reduce the amount of light that the lens can capture. Is anti-reflective coating an industry standard across lenses?
hmm....quick google suggests that lack of anti reflective coatings on lenses may be the reason for this unusual issue. Which means that we are stuck with it...
And it does look like that anti reflective coating is the norm and it actually increases the light that reaches the sensor....Why would google hardware not do this? go figure!
devsk said:
I see the issue across all lenses. That's why I think its the metal, not the lenses or the glass covering the lenses!
Any kind of coating will reduce the amount of light that the lens can capture. Is anti-reflective coating an industry standard across lenses?
Click to expand...
Click to collapse
As i said, i have a black skin on my camera bar, there is no metal showing.
Any lens worth its salt be it camera or glasses will have an anti-reflective coating.
Why Lens Coatings Are So Important in Photography
A look at the science of camera lens coatings and how they improve optics while reducing things like lens flares in photographs.
petapixel.com
devsk said:
hmm....quick google suggests that lack of anti reflective coatings on lenses may be the reason for this unusual issue. Which means that we are stuck with it...
And it does look like that anti reflective coating is the norm and it actually increases the light that reaches the sensor....Why would google hardware not do this? go figure!
Click to expand...
Click to collapse
They have on the lenses, they just didn't bother on the class covering them.
MrBelter said:
They have on the lenses, they just didn't bother on the class covering them.
Click to expand...
Click to collapse
Any idea if it can be applied after the fact from the outside? Or is it something that has to be cured into the glass before putting it on the frame?
devsk said:
Any idea if it can be applied after the fact from the outside? Or is it something that has to be cured into the glass before putting it on the frame?
Click to expand...
Click to collapse
That i don't know, i wouldn't want to risk buggering the whole thing up myself as any coating has to bond to the glass and getting it back off could be difficult.
The fix may be as simple as holding your hand above the lens like a simple lens hood to prevent light scatter.
I went to a Christmas light switch on last night and the lens flare and the simple reflections you get from the plain glass doesn't half make you study the scene to try to get around it, that in its self makes spontaneous street photography at night difficult.