i m using CyanogenMod 12.1 but after installing xposed framework via twrp it stuck at boot animationanimation then i flash the CyanogenMod recovery but now the phone is not getting into recovery and still bootloga is appears
mznrohan said:
i m using CyanogenMod 12.1 but after installing xposed framework via twrp it stuck at boot animationanimation then i flash the CyanogenMod recovery but now the phone is not getting into recovery and still bootloga is appears
Click to expand...
Click to collapse
Flash (CAESIUM KERNAL) jalebi it'll work sure if it'll not so discuss with me
---------- Post added at 06:25 AM ---------- Previous post was at 06:23 AM ----------
mznrohan said:
i m using CyanogenMod 12.1 but after installing xposed framework via twrp it stuck at boot animationanimation then i flash the CyanogenMod recovery but now the phone is not getting into recovery and still bootloga is appears
Click to expand...
Click to collapse
https://www.androidfilehost.com/?w=files&flid=167462
Try that 1.7 only
Related
Help,
I rooted my VZW s3 and all was good until i tried to update to a CM10 rom..
It would not install the zip file.. I followed all the guides about backing up the imei file ect.. and I used the correct recovery.. it would not install..I kept getting erros with the ROM zip files I downloaded. so i tried the ez recovery app and installed TWRP.. I like that and have used it in the past.. well I forgot that I cant restore a backup from CWM. so now im stuck bootlooping into TWRP recovery.
Any help?
I was installing TWRP while my GF was talking to me. Not that I'm blaming her or anything but I failed to add the "dd" during the manual install. Now I'm downloading the stock rom and going to try Odin to get my phone functioning again.
Twrp doesn't support kexec, so it will only boot stock based ROM's
sent from locked bootloadrer SGS3 running a custom kernel
wera750 said:
Twrp doesn't support kexec, so it will only boot stock based ROM's
sent from locked bootloadrer SGS3 running a custom kernel
Click to expand...
Click to collapse
can somebody send me a link to a stock rom so I can start this over?
I cant even get adb to recognize my device when its on.. I only have TWRP bootlooping into recovery...
Thanks..
sidn3y said:
I was installing TWRP while my GF was talking to me. Not that I'm blaming her or anything but I failed to add the "dd" during the manual install. Now I'm downloading the stock rom and going to try Odin to get my phone functioning again.
Click to expand...
Click to collapse
Not saying this will help you, but it did with me. I have no idea how.
Tried vol down/home/power and it booted into the custom rom screen. Cancelled that. It rebooted normally..
---------- Post added at 09:48 PM ---------- Previous post was at 09:48 PM ----------
kwiksilvr said:
can somebody send me a link to a stock rom so I can start this over?
I cant even get adb to recognize my device when its on.. I only have TWRP bootlooping into recovery...
Thanks..
Click to expand...
Click to collapse
http://stockroms.net/file/GalaxyS3/SGH-I535/StockROMS.net-SCH-I535_VZW_Verizon.zip
I have been trying to install cm11 4.4.2 by cool development on my s2plus, but getiing a "recursive metadata status 7" error.I am using the latest CWM recovery.Now I'm stuck at the recovery menu.The phone won't get past the recovery menu when turned on.
Please help!!
turn off phone and go in download mode and flash again stock firmwear
gentr said:
turn off phone and go in download mode and flash again stock firmwear
Click to expand...
Click to collapse
Thanks
Can you please tell me the entire process of flashing a stock firmware?
Brick ?
Sent from my Optimus One using XDA Free mobile app
nas619 said:
Thanks
Can you please tell me the entire process of flashing a stock firmware?
Click to expand...
Click to collapse
same as installing cwm 6.0.4.5
---------- Post added at 10:55 AM ---------- Previous post was at 10:50 AM ----------
only that we should extact stock rom before
nas619 said:
I have been trying to install cm11 4.4.2 by cool development on my s2plus, but getiing a "recursive metadata status 7" error.I am using the latest CWM recovery.Now I'm stuck at the recovery menu.The phone won't get past the recovery menu when turned on.
Please help!!
Click to expand...
Click to collapse
- Update bootloader to 4.2.2
- Install valid recovery s2ve for GT-I9105, s2vep for GT-I9105P
- Install CM11
LuK1337 said:
- Update bootloader to 4.2.2
- Install valid recovery s2ve for GT-I9105, s2vep for GT-I9105P
- Install CM11
Click to expand...
Click to collapse
Thanks for your suggestion,but I already did the things you said.
P.S. I tried installing the OMNIROM 4.4.2 and it's working perfectly.
Finally got it working!!! :victory:
Thanks to everyone behind the ROM!
I have tried to install cm12.1 nightly through cyanogen recovery and it got stuck in cyanogen fast bootmode .when I try to power on my device yu logo gets blink and auto turnoffs ...please help me ......in what way can I get back my phone ?? Can customer care solve the issue? :'(
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
arshad145 said:
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
Click to expand...
Click to collapse
No bro ...
While connected to system it cannot detect my device
Have you tried to search for ROMs for your phone model?
Google or Search at www.needrom.com
Take a note....
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
You are going for the most extreme case =/
arshad145 said:
You are going for the most extreme case =/
Click to expand...
Click to collapse
going serious,,,,?
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
arshad145 said:
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
Click to expand...
Click to collapse
Sorry bro....
I thought he is using chinese phone and got mediatek chipset....
---------- Post added at 09:36 AM ---------- Previous post was at 09:27 AM ----------
sai978 said:
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
Click to expand...
Click to collapse
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
aravazhi_mdr said:
Sorry bro
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
Click to expand...
Click to collapse
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
sai978 said:
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
Click to expand...
Click to collapse
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
arshad145 said:
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
Click to expand...
Click to collapse
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
aravazhi_mdr said:
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
Click to expand...
Click to collapse
I will try bro. But my question is can I flash this without unlocking bootloader
sai978 said:
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
Click to expand...
Click to collapse
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
sai978 said:
I will try bro. But my question is can I flash this without unlocking bootloader
Click to expand...
Click to collapse
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
arshad145 said:
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
Click to expand...
Click to collapse
Yes I have . but when I type the command fastboot oem unlock-go it says unable to unlock bootloader and the main thing is I can only enter cyanogen fastbootmode
aravazhi_mdr said:
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
Click to expand...
Click to collapse
Bro which is better to flash?? Boot.img or twrp.img
twrp is better as u can flash whole rom
---------- Post added at 18:14 ---------- Previous post was at 18:13 ----------
boot img will unlock bootloop but not neccessary if u need a working rom
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
thinhx2 said:
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
Click to expand...
Click to collapse
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
anas_ahmad said:
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Click to expand...
Click to collapse
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
santoshhh000 said:
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
Click to expand...
Click to collapse
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
thinhx2 said:
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
Click to expand...
Click to collapse
Which one is working?
santoshhh000 said:
Which one is working?
Click to expand...
Click to collapse
R.r 7
thinhx2 said:
R.r 7
Click to expand...
Click to collapse
Did flashing stock rom also not working for u?
I am using Peter's recovery and wish to go back to stock recovery as installing ota is tiring. How can I do that without losing data and files?
If you are using official MIUI ROM, dirty flashing full recovery ROM will also overwrite custom recovery with stock recovery.
AbioticSpoon said:
I am using Peter's recovery and wish to go back to stock recovery as installing ota is tiring. How can I do that without losing data and files?
Click to expand...
Click to collapse
are you rooted?
if ues then just unroot using magisk unistaller and reboot it will restore stock recovery then use ota to update then again you can flash twrp peter recovery by fastboot and boot in to recovery and then flash magisk it will again have both recovery and root
my device shows encrypted status
AbioticSpoon said:
I am using Peter's recovery and wish to go back to stock recovery as installing ota is tiring. How can I do that without losing data and files?
Click to expand...
Click to collapse
Just download the fast boot rom from the official website and flash it by mi flash tool.
And during flashing it select flash all except data.
And you will lose nothing and your recovery will be restored.
Then you can flash ota by that.
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
blueandro said:
are you rooted?
if ues then just unroot using magisk unistaller and reboot it will restore stock recovery then use ota to update then again you can flash twrp peter recovery by fastboot and boot in to recovery and then flash magisk it will again have both recovery and root
my device shows encrypted status
Click to expand...
Click to collapse
Really?
I should try this.
Have you tried this, what is the concept behind this?
How can unrooting can restore stock recovery?
yes i have tried it and i m on latest stable 10.3
13
blueandro said:
yes i have tried it and i m on latest stable 10.3
13
Click to expand...
Click to collapse
Complete uninstall or just restore image option?
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
blueandro said:
yes i have tried it and i m on latest stable 10.3
13
Click to expand...
Click to collapse
And are u encrypted? Means does twrp ask for screen lock password during going to recovery?
gautamajay52 said:
Complete uninstall or just restore image option?
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
And are u encrypted? Means does twrp ask for screen lock password during going to recovery?
Click to expand...
Click to collapse
using peters recovery latest one
i m not using my fone with lock password so it didn't ask
blueandro said:
using peters recovery latest one
i m not using my fone with lock password so it didn't ask
Click to expand...
Click to collapse
Ok... I will try this... wating for new update that i can verify it too.
Thanks
I have one solution
simple
just things needed are:
1. miui stock recovery img
2. vbmeta
next,
1. First flash recovery image.
2. Then flash vbmeta image.
what does vbmeta do. it actually saves the recovery image after flashing new recovery.
3. Finished reboot