Hey guys,
So today, as we know most of MM6.0.1 ROMs (cm13,RR,etc...) And there issue is that there system UI gets laging and lagger until the system UI restarts and same process repeat
So this guide is here to fix this issue
But first :-
Thanks to @webernard for discovering most of the lag fix, rest where discovered by me
Anyways let's start
what apps you will need?
1.kernel auditor (or any kernel managing apps but kernel auditor is recommended)
on some cm13-based ROMs (like RR) kernel auditor is installed by default so if you are running a cm13-based ROM and have kernel auditor installed by default then you can ignore this
2.busybox installer (because kernel auditor works better with busybox, and also xbooster may require busybox)
3.root booster (this app is 100% more OP than clean master)
4.Xbooster(a RAM booster)
(The following apps are optional)
5.greenify
6.amplify (REQUIRES XPOSED!!!)
7.an "system ui restarter" app
8.gamebooster3
Before we start
Make sure you have root access
if you are on cm13-based ROM then you can safely ignore this because in cm-based ROMs we use superSU instead of cmSU
but If you are on cm13 then you must do the following to get root :-
1.go to setting>about phone>press on build number until its says "you're now a developer!" (Ignore this if you already have enabled developer options)
2.now go to developer options>enable root by going to "root access" and make it "apps only" or "apps and ADB"
DONE!
And busybox Installed
how to install busy box :-
1.download and open the busy box installer (that we said earlier)
2.HIT THAT INSTALL BUTTON(don't wait smart install,JUST DO IT)
(Optional)3.REBOOT!!!
NOTICE!!! :-
For RR and CM, you are going to need a special kernel
For more info go to here
For MOKEE, you don't need this guide because its not lagging at all (and that's great), but you are completely free to try out the extra steps[emoji4]
now let's start
1.open kernel auditor and grant its root permission
2.now do in the following in
*CPU:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*CPU Voltage: (RR WITH SPECIAL KERNEL ONLY!!) Press on global offset and :-
*Entropy:
*I/O scheduler:
And finally
*Low Memory Killer: (if your are using themes)
And make sure in all you made them "apply on boot"
After you are done doing the following
REBOOT!!
3.now, open root booster,
grant it's root access and active the "speed" mode
After you actived the mode, it may ask you to reboot so REBOOT!! (or restart system ui, but rebooting is recommended)
4.open Xbooster(and grant its root access)
now you have 2 options to active
multitasking and gaming, now you going to active depending in your usage
Example: if you are doing some serious gaming or benchmarking the the gaming mode is your choice
If you are running more than 5 apps then, multitasking mode is for you
And also enable the "kill system apps" for more RAM
now after you are done after with all the important steps, now we will do the optional steps (you can ignore it if you want)
1.using greenify(for more RAM and battery life)
1.open greenify and grant its root permission
2.selected ALL apps except themes
3.let greenify to its thing and have a "hibranite now" widget and try to hibreanoite every 15-30 minutes
DONE!
II.blocking 2 battery drainer and RAM eating wakelocks(same reason as greenify's ↑↑↑↑↑↑)
If you are using cm-based ROM then check for "wakelock blocker" feature in them(RR has ) otherwise, USE XPOSED FOR AMPLIFY!!!!
Note:-
If you are going to use amplify then those 2 annoying wakelocks are blocked by default
1.Go to your cm-based ROM setting >wakelocks blocker if it has
2.and turn it on
3.now block those 2 wakelocks:-
*NlpCollocterWakelock
*NlpWakelock
DONE!
III.restart system ui (if you are using themes)
Note:-
The is why I said you are going to need a system ui restarter app, if you using a cm-based ROM (like RR, AICP)make sure they have that "restart system ui" feature
You need to restart your system ui every time you apply a theme because if any further changes happen to the system ui (like apply another theme)
Then restarting system ui is a MUST!!!
Anyways, you are also going to restart the system UI if whenever you reel the Device is lagging, that's all why you need a system UI restarter
IV.changing system animations
this the easiest extra step you can do
1.go to settings>about phone
2.Tap on the build number many times until you will get a toast saying "you are now a developer!"
3.now go back to settings and you will find "developer settings"
4.tap on it and scroll until you see this :-
5.Now, set it as the settings on the picture above
6.Done!
And finally
V.for hardcore gaming
1.Go to Xbooster and set it to "gaming mode"
2.now open Gamebooster 3 and you have 3 modes :-
The "no boost" disable any mode active
The "high boost" boosts your device to a impovered experience
The "ultra boost" is just like "high boost" but improves the gaming experience ALOT(but it will require in app credits)
now this should fix the lag in all MM ROMS
This was tested on :-
RR5.6.2,.3,.4
Octos oct-MM
Cm13
AICP V11.0
VRToxin 3.0
Hopefully this will fix the lag in all MM ROMS
make sure to leave a thanks [emoji106] if this worked for you [emoji4]
I have done it but after the final reboot I got a bootloop, but clearing cache and dalvik solved that.
Sent from my GT-I9505 using Tapatalk
jamboss said:
I have done it but after the final reboot I got a bootloop, but clearing cache and dalvik solved that.
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
How????
Surely you have done something wrong or something else which caused the reboot
but at least you figured out to fix your problem[emoji3]
Sent from my GT-I9505 using Tapatalk
I can honestly say this has reduced a lot of lag from my system, at first no but after a few reboots {activatingmodules} I can feel the difference. Excellent guide.
Sent from my GT-I9505 using Tapatalk
GUIDE UPDATED
Sent from my GT-I9505 using Tapatalk
Nice mate, I will follow the progress
Subscribed.
Sent from my Nexus 5X using Tapatalk
Most definitely worked!!! I've never seen resurrection ROM fly so fast! I followed each step except I increased the read ahead for phone memory and external storage to 2048kb. It's also showing a increase in speeds on my external SD with these settings, saying I use a 8Gb class 4 SD lol I'm very satisfied
---------- Post added at 04:48 AM ---------- Previous post was at 04:42 AM ----------
I got sort of stuck in between speed and battery balancing in root booster tho. Im a junky for speed but its always nice to have great battery life on the s4 lol. I hope one day you figure out how to increase both some what equally! Great job btw
Osmoso said:
I got sort of stuck in between speed and battery balancing in root booster tho. Im a junky for speed but its always nice to have great battery life on the s4 lol. I hope one day you figure out how to increase both some what equally! Great job btw
Click to expand...
Click to collapse
Don't worry, the speed mode saves the battery by 10% unlike the default, if you want some more balance then consider buying the "extreme stability" mode, increases speed and saves battery up to 20% and of course stability up to 100%(so your phone becomes very stable), hopefully that will help you [emoji4]
Sent from my GT-I9505 using Tapatalk
vbajs said:
Don't worry, the speed mode saves the battery by 10% unlike the default, if you want some more balance then consider buying the "extreme stability" mode, increases speed and saves battery up to 20% and of course stability up to 100%(so your phone becomes very stable), hopefully that will help you [emoji4]
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Actually so far I think these settings are great as is. After using for the day my phone has been on go! Playing YouTube videos, music and games like NFS most wanted. I started at 90% around 6 am this morning and now I'm just hitting 66%! That's awesome. It got me through my day when I usually had to charge every 2-3 hours
Anyone know if asop for the s4 has this lag problem as well? Thanks!
Fantastic
Hey guys,
So today, as we know most of MM6.0.1 ROMs (cm13,RR,etc...) And there issue is that there system UI gets laging and lagger until the system UI restarts and same process repeat
So this guide is here to fix this issue
Fixing the lag and following your exelent guide defenitely did work for me. My Lockscreen drove me bonkers. You unbonkered me. Thank you very much. Also thanks to webernard
10neke
Happy user of Resurrection Remix v5.6.2 6.0.1 :good:
---------- Post added at 12:04 PM ---------- Previous post was at 11:51 AM ----------
[
Hi guys,
I have a question for you. I have do everything, and the smartphone now work really fast. I have just a problem with the installation of Xposed: when i try to install the framework, xposed say to me that it's not compatible with my Android SDK or my architectures. I have download Xposed from the original creator's page. What have i done wrong?
MikeDjagon95 said:
Hi guys,
I have a question for you. I have do everything, and the smartphone now work really fast. I have just a problem with the installation of Xposed: when i try to install the framework, xposed say to me that it's not compatible with my Android SDK or my architectures. I have download Xposed from the original creator's page. What have i done wrong?
Click to expand...
Click to collapse
I believe so,
I really don't know what it the cause,
Maybe you are flashing an unofficial Xposed installer?
Sent from my GT-I9505 using Tapatalk
Does anyone know how to download marshmallow pure without cm
Sent from my Moto G 2014 using Tapatalk
Kamvik said:
Does anyone know how to download marshmallow pure without cm
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I believe you mean AOSP?
Sent from my GT-I9505 using Tapatalk
Yes
Sent from my Moto G 2014 using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:56 PM ----------
For moto g 2
Sent from my Moto G 2014 using Tapatalk
Kamvik said:
Yes
Sent from my Moto G 2014 using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:56 PM ----------
For moto g 2
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
For MOTO g2!!
Sorry, I can't help you with that, also this is the galaxy s4 sub-froum so you are in the wrong place, what you need to go is the moto g2 sub-froums
So look for your device's sub-froum in the sub-froum list and STICK WITH IT!! to avoid problems like flashing a ROM made for an another device or opening a ROM thread in the wrong sub-froum
Sent from my GT-I9505 using Tapatalk
GUIDE UPDATED
Sent from my GT-I9505 using Tapatalk
MikeDjagon95 said:
Hi guys,
I have a question for you. I have do everything, and the smartphone now work really fast. I have just a problem with the installation of Xposed: when i try to install the framework, xposed say to me that it's not compatible with my Android SDK or my architectures. I have download Xposed from the original creator's page. What have i done wrong?
Click to expand...
Click to collapse
You downloaded the wrong Xposed for your Android version... Just download the right version & it will work
wow ! this actually works ! the notification drawer is smoother now and even the recents menu is faster ! I wonder if it can really improve even the touchwiz roms .
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this rom you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Of course, this rom has been tested but whatever happens on your device will not be held against the developer.
Description:
Hi and WELCOME, I present you to my new ROM why make this rom you ask well i Originally it was made for my self and friend but i decided to share it with you guys
Its very stable its been built off of stock KOT49H (4.4.2 KitKat) For A Stable Base
But Enough taking go a head and flash and have fun IF you like my development please follow my project from desktop , by going on the first page of this thread and pressing from the top black corner the button telling you "FOLLOW PROJECT" .
THANK YOU .Features:
Stock KOT49H (4.4.2 KitKat)
Deodexed
Zipaligned
SU Binairies.
Smooth UI
Custom Built Settings
Bloatware Removed
Pre-Rooted via SuperSU
System Tweaks
init.d Support
build.prop tweaks
battery optimizations
Sqlite3 Script
Stock Kernel
Qualcom optimzaitions and run time libraries!
Xposed Installer
MyHub
Performance Control
LMT Launcher (Pie)
DashClock
CustomWallpaper App
Viper4Android Sound Modifier
Installation Instructions:
Download Rom
Boot into Recovery
Wipe
And Flash The Rom.
then You will need to flash the file on your SDCard in /Nightmare/NightmareSettings.zip for the settings
$$$$$$$$
ChangLog
v1 - 1/1/201 :
Initial Release
Downloads:
Nightmare v1.0
MD5 f0c93c147eb50e2cca6f6f4d5c571f3b
Don't forget to hit the thanks button, I have worked very hard on this rom! Also, first boot will take 5 - 10 minutes!
Also You will need to flash the file on your SDCard in /Nightmare/NightmareSettings.zip for the settings
Bugs:Most important issue (First priority to fix):
You need to flash settings in the rom after first boot
Less important:
none
Thanks And Credits
@glencoco
kszaq - Qualcom and run time libraries
@Calkulin - App Ops
@xIC-MACIx - APM Source Files
Zhuhang & ViPER520 For the wonderful sound Modifier App @Venomtester @rc420head
mikrosmile - For the wonderful All-In-One App
h0rn3t
homeslice976
SteelH
OMJ
Swagstr
Eg1122
aamikam
FAQ:
Q: Where Is the settings pic like in the op?
A: You will need to flash it the rom puts the file on your SDCard in /Nightmare/NightmareSettings.zip
Q: How Dose This rom Compare to (inscert rom /dev)
A Please don't do this all it will Do is start is a rom fanboy/girl(if there are any) War
Q: Hay Why Don't I see V4A In The app drawer
A: Well long story short Its Supported by 3 Party Apps With Equalizers like Walk-man or Google Music
Q: Which kernel is best for this ROM?
A: Well Based on some history in past devices I Barely use kernels but if I do on this devise it will be flar2 and franciscofranco's Kernels but it depends on how you use your phone or what you like
Screen shots:
XDA:DevDB Information
Nigtmare Rom, a ROM for the Nexus 7 (2013)
Contributors
Flashalot
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Stock KOT49H
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-01-01
Created 2014-01-01
Last Updated 2014-01-01
Reserved
These Sources Will Help You Flash A custom Rom.:
Kernels:
Bulletproof
franco.Kernel
Setup Viper4android:
Open Google Play Music
then settings
Open Equalizers
Open Viper4anroid
give it root access.
Install Drivers
reboot
then put it in Fx compatible mode.
Setup LMT (Pie):
Open LMT
give it root access.
Set TouchService Mode To Pie
Scroll all The Way Down To Pie And Set Activation Area Position to what you want
Set A color if you want.
$$$$$$$$.
Setup MyHub:
Open Myhub
give it your XDA Name
Go To Settings And Set Your Recovery To What Every Your Running
Find A Mod You Want Download it
Give It Su And Flash
$$$$$$$$.
Reserved
Mods And Themes Will Be In My Hub
So Make Sure To Check it out
Current Mods
NightmareModPack
VolSkipMod
APM
Red%Battery
%Battery
NightMare Audio Mod
What does flashing "settings" do, after flashing the ROM zip?
Thanks for sharimg
Sent from my Nexus 7 using Tapatalk
naturecannon said:
What does flashing "settings" do, after flashing the ROM zip?
Thanks for sharimg
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Its makes the settings look like this and gives app ops to
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Add Some Battery Themes
Add How-To Set Up MyHub
I think something is wrong with the zip. Wont install. Failed.
Whats werird is when I try to transfer this rom zip from PC to my n7 I get The device has either stopped responding or has been disconnected. message..... yet all other files transfer with zero issue. I think my nexus knows the file is corrupt.
I transferred via lan with es file explorer and that went well but the install failed.
Downloaded twice so I say its on your end.
EDIT: Downloaded with my n7 and install failed as well. That makes three Downloads and I never have much issues with bad downloads. Something definitely up on your end!!
Please confirm and I will give another try
naturecannon said:
I think something is wrong with the zip. Wont install. Failed.
Whats werird is when I try to transfer this rom zip from PC to my n7 I get The device has either stopped responding or has been disconnected. message..... yet all other files transfer with zero issue. I think my nexus knows the file is corrupt.
I transferred via lan with es file explorer and that went well but the install failed.
Downloaded twice so I say its on your end.
EDIT: Downloaded with my n7 and install failed as well. That makes three Downloads and I never have much issues with bad downloads. Something definitely up on your end!!
Please confirm and I will give another try
Click to expand...
Click to collapse
I'll check it out
Ya bad upload sorry for the inconvenience I'll reupload
Thanks for the heads up :thumbup:
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Ok I Fixed The Link And Tested It So You Guys Should Be Good To Go
Where is the "NightmareSettings.zip"?
---------- Post added at 05:39 PM ---------- Previous post was at 05:36 PM ----------
Sorry I found it
Almost Done With Sony Walkman port / Media apps
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Flashalot said:
Ok I Fixed The Link And Tested It So You Guys Should Be Good To Go
Click to expand...
Click to collapse
Cool. Gonna check it out now since I have some free time again. Thanks
Sent from my Nexus 7 using Tapatalk
Been running the ROM for the last day with heavy use. So far it has been completely stable and smooth. Looks like I might have found my replacement for CleanRom.
I also like the way Xposed is built in. I use GravityBox to tweak my UI so having access through system setting is a nice touch. I had never used Pie before but I think I am going to like it once I get use to it.
If you like having the flexibility to personalize your ROM but also want the stability of a ROM based on stock you should definitely give Nightmare a try.
Sent from my Nexus 7 using Tapatalk
Just downloaded the rom,it looks great about to give it a try.
Flashalot said:
Almost Done With Sony Walkman port / Media apps
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
What you know bout section.80 booiii? Lol
Sent from my Nexus 7 using Tapatalk
Installing this ROM now been out of the ROM game for awhile so let's see how it goes.
Sent from my XT1080 using xda app-developers app
---------- Post added at 12:12 AM ---------- Previous post was at 12:07 AM ----------
How do I skip setup I'm getting setup wizard has stopped. Its def user error do I have to wipe internal storage? Using twerps
Sent from my XT1080 using xda app-developers app
treyweez11 said:
What you know bout section.80 booiii? Lol
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Lol
All about T.D.E can't wait for school boy Q new album
pilot123 said:
Installing this ROM now been out of the ROM game for awhile so let's see how it goes.
Sent from my XT1080 using xda app-developers app
---------- Post added at 12:12 AM ---------- Previous post was at 12:07 AM ----------
How do I skip setup I'm getting setup wizard has stopped. Its def user error do I have to wipe internal storage? Using twerps
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
Hmmm that's odd I redownloaded the build before I posted it it should be now probably
If you flahed settings before you set it up it will fc I think that's your problem
Also I should have some new stuff on myhub today or tomorrow
Sent from my Nexus 7 using Xparent Red Tapatalk 2
Yea I flashed one after the other. Thank you for your help looking forward to using this ROM!!!
Sent from my XT1080 using xda app-developers app
New Mod On Myhub For now its only custom fonts/Animation but it will get updated
And Sony Mods Are to Come
Also Add Current mods In My hub In 3 Post
Works great!
Sent from my XT1080 using xda app-developers app
Switch D2A_RT
Tool by hnkotnis
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whoa! My 2nd XDA Portal Post! THIS IS ON XDA PORTAL! THANKS SIR WILL VERDUZCO!!!
http://www.xda-developers.com/android/switch-between-dalvik-and-art-from-recovery-with-a-single-aroma-based-zip
Also on XDA TV, LOL, Jordan doesn't know that my Username is pronounced as "H - N - Kotnis".
http://www.xda-developers.com/android/nokia-x-camera-ported-easily-flash-between-dalvik-and-art-cf-lumen-released-by-chainfire-xda-developer-tv/
Click to expand...
Click to collapse
Hello Everyone!
I installed CM11 Kitkat on my Samsung Galaxy S Plus. I didn't wanted to activate the Developer's option in settings for next 5 days (Because I don't want my friends mess around). But I wanted to switch over to ART. So I had such idea that I can do this from recovery.
But I also had idea, due to my previous work with Aroma Installer, that I can create a single zip that can revert back to Dalvik also.
I found that after Factory Restore runtime is set to Dalvik again.
So I concluded that it is stored in /data
After messing around with the /data partition, I found where selected runtime is saved.
I created such a zip and I am sharing with you.
Meanwhile, when I was writing this thread, similar thread suggest showed me another tool of XDA Senior Member husen4u.
However his tool has 2 different files required to be flashed.
I did not copy his work, but runtime change code is same for all Android 4.4+, however I still give him credits, because he created similar project first.
So I present you my new tool :- Switch D2A_RT
So general idea is this tool can change ART <------> Dalvik from single zip.
Downloads:-
TESTED OK
File is attached at bottom of this post.
Current Version :- 2.0
Release Date :- 15th April, 2014
MD5 Sum:- 0f50fa11df8452f75e83a5bff2bee78a
Scanned with VirusTotal. NO VIRUS FOUND!
Detection ratio :- 0/51
https://www.virustotal.com/en/file/35552560f6c1927059a78d99265a556040394f4cbb51ad849f35cc3cc388daea/analysis/1397545742/
Click to expand...
Click to collapse
Older Version Details:-
File is attached at bottom of this post.
Older Version :- 1.0
Release Date :- 11the April, 2014
MD5 Sum:- 60a5261f35a969e38816699159b285a1
Scanned with VirusTotal. NO VIRUS FOUND!
Detection ratio :- 0/50
https://www.virustotal.com/en/file/bd7bc795b9b9656a63652a1fbd8ec360427c7f45a72959ce427bfc733653f11d/analysis/1397214029/
Click to expand...
Click to collapse
Change Log:-
Version 0.5 5th April, 2014
Initial Release.
First Working Version.
Not published on XDA. Only tested on my phone.
Version 0.5 5th April, 2014
Fixed some minor icons.
First version to be published on XDA and also featured on XDA Portal and XDA TV
Version 2.0 15th April, 2014
Added option to wipe Dalvik Cache.
busybox comes with this zip, no need to have busybox installed.
Click to expand...
Click to collapse
Instructions:-
0. You need a Android 4.4+ ROM.
1. Download and put the zip file in any storage.
2. Go to recovery (use any recovery, I used CWM Touch 6.0.3.6).
3. Flash the zip file and navigate through Aroma Menu.
4. Choose ART or Dalvik and Reboot.
5. Rebooting can take lot of time (depending on number of apps). CyanogenMod 11 users can see "Android is upgrading" screen.
ENJOY!!!
PLEASE TAKE A LOOK AT FAQ if you have any questions/doubts or this software is not working.
Few common problems like incompatibility and XPOSED are mentioned there.
FAQ (Frequently Asked Questions):-
Phone bootlooping after changing runtime to ART?
=> Change runtime to Dalvik back again. Your phone (may) not be compatible.
Apps crash with ART as runtime?
=> That is not my fault. ART is in primary stage and many apps do not support ART. Switch back to Dalvik to use such apps.
Status 0 Error while flashing the zip?
=> Relax. Take update-binary of ROM of your device. Rename it to "update-binary-installer" and use it to replace its counterpart from zip.
Runtime is not changing to ART?
=> 1) Uninstall Xposed Framework, Reboot. Then try again. Xposed and ART don't work simultaneously.
Or_2) Check if "libart.so" and "libart-compiler.so" are in /system/lib. If they don't exits, ROM is not compatible with ART.
Or_3) Open "/data/property/persist.sys.dalvik.vm.lib" with text editor and find what is runtime.
You stole XYZ's (XYZ is example person's name) work.
=> I sincerely tell you, I didn't do that. I discovered this on my own after scanning all files in /data.
Click to expand...
Click to collapse
I tested this on my SGS+ GT-I9001 with CM11. Both functions work. However there might be some minor GUI/icon/picture size errors.
But main functions of this work fine.
Disclaimer:-
Developer of this tool, hnkotnis, has no responsiblity if your phone, memory card or you are bricked, bootlooped or any type of damage.
You are using this tool on your own and you take whole responsibility of any damage caused.
YOU CANNOT MODIFY, COPY OR PUBLISH THIS WITHOUT MY PERMISSION.
Click to expand...
Click to collapse
Press Thanks if helped.
Reserved.
Reserved for something or may be nothing, but reserved for everything.
Reserved
Same here.
SO say if the option to switch to ART is not shown in the developer options (d801 LG G2) could this still be used? Or are OEM's able to fully remove ART instead of disabling the option?
its used in moto defy cm11 ah?
Have you noticed any performance differences since you switched to ART? I've been curious about this new runtime for a little while, and I actually tried to switch it in my Gummy 4.4.2 ROM on my Note II i605. There is an option within the ROM to choose between Davlik and ART, but it apparently doesn't do anything because every time I check it, it's back to Davlik. I'm going to download and test this! Slow day at work...
---------- Post added at 01:36 PM ---------- Previous post was at 01:07 PM ----------
Up and running. Install was smooth, and everything seems to be working. Nice job!
Sent from my SCH-I605 using xda app-developers app
thefinancemaster said:
Have you noticed any performance differences since you switched to ART? I've been curious about this new runtime for a little while, and I actually tried to switch it in my Gummy 4.4.2 ROM on my Note II i605. There is an option within the ROM to choose between Davlik and ART, but it apparently doesn't do anything because every time I check it, it's back to Davlik. I'm going to download and test this! Slow day at work...
---------- Post added at 01:36 PM ---------- Previous post was at 01:07 PM ----------
Up and running. Install was smooth, and everything seems to be working. Nice job!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Disable Xposed Framework for resolve this problem.
Best regards.
devilozzo said:
Disable Xposed Framework for resolve this problem.
Best regards.
Click to expand...
Click to collapse
Nice man.. I had this idea floating around in my head for a while, even posted it to google devs.. I was to get them to run at the same time art first then delvik after the initial launch swith after the at
rt has optimized the apps then over to delvik to keep any lagging scripts from slowing load times between app lauches..
Good
Works fine on my old GT 5100 (Galaxy Tab 2 10.1) running Android-Andi's latest Unofficial Cyanogenmod 11 ROM backed by Dhollmen Kernel
x714x said:
SO say if the option to switch to ART is not shown in the developer options (d801 LG G2) could this still be used? Or are OEM's able to fully remove ART instead of disabling the option?
Click to expand...
Click to collapse
This can be used without enabling Developer Options.
But compatibility of ART Depends on your ROM buddy. Please read the FAQ. There are 2 files mentioned.
If OEM removed "libart.so" and "libart-compiler", then ART is fully disabled.
Press Thanks if helped.
ela1103 said:
its used in moto defy cm11 ah?
Click to expand...
Click to collapse
It can work in all Kitkat based phones. So it must work on your Motorola Defy CM11.
Just 2 .so files (Their names are in above comment and in FAQ) are required.
Press Thanks if helped.
Sent from my GT-I9001 Gadget of Mass Destruction with CM11 using XDA Developers App.
Can this work on stock 4.4.X roms?
YOSEFE said:
Can this work on stock 4.4.X roms?
Click to expand...
Click to collapse
ART is feature of Android 4.4.x. It doesn't matter wheather it is stock or custom ROM.
It should work. Do you have "libart.so" & "libart-compiler.so" in /system/lib? If they are there, that is not removed by OEM,
Then it must work.
Press Thanks if helped.
aroma touch interface not working on Note 3 n9005
yosef019 said:
aroma touch interface not working on Note 3 n9005
Click to expand...
Click to collapse
It is problem of calibration of your phone. Press menu at 1st screen ----> Calibrate.
Sent from my GT-I9001 Gadget of Mass Destruction with CM11 using XDA Developers App.
hnkotnis said:
It is problem of calibration of your phone. Press menu at 1st screen ----> Calibrate.
Sent from my GT-I9001 Gadget of Mass Destruction with CM11 using XDA Developers App.
Click to expand...
Click to collapse
yes ok and its still at installing screen how much time take to install art?
whell i think its not for samsung firmwares
yosef019 said:
yes ok and its still at installing screen how much time take to install art?
whell i think its not for samsung firmwares
Click to expand...
Click to collapse
It takes half or max 1 second. Your Samsung Stock ROM may not be compatible with ART.
Sent from my GT-I9001 Gadget of Mass Destruction with CM11 using XDA Developers App.
Doesn't work on Xperia Z1 4.4.2 rooted stock. libart.so, libart-compiler.so are available.
Phone boot loops after ART is enabled. Restores safely when switched back to dalvik.
@op do you know why?
taranfx said:
Doesn't work on Xperia Z1 4.4.2 rooted stock. libart.so, libart-compiler.so are available.
Phone boot loops after ART is enabled. Restores safely when switched back to dalvik.
@op do you know why?
Click to expand...
Click to collapse
A logcat will be appreciated.
Dont work on temasek v65 boeffla 2.2
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
Hello xda,
Here a first build cwm flashable for the T310 based on official 4.4.2
WARNING:
- I DON'T HAVE THIS TABLET
- USE PHILZ OR CWM TO FLASH THIS
Features:
- Based on T310XXUBNE9 (Official)
- Flashable
- Deodexed (Version 1 odexed)
- Rooted (Version 1 Not rooted)
- Stock as possible
- Debloated
- Removed Knox
Download:
Build 1: https://mega.co.nz/#!bwZHRQAZ!vhWLw3CzY3VBtuS6zg_eDpM4-dZGHe7ftbQ4n5SNEbo (~1,07GB)
Build 2: https://mega.co.nz/#!ywRRWbDR!_3kshF_QqqwOgn2pbCfndZDsrB0qfDQQupZXE96eRfI (~964,4MB)
Screenshots: thanks to @Richcar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
Build 1:
- First release!
Build 2:
- Rooted
- Debloated
- Deodexed
- Removed Knox
Thanks to:
@Richcar (Screenshots & Testing)
@Cpt_Chaos (Testing)
@akas1955 (Testing)
@dsixda for kitchen
Samsung for the awesome update
Ok the rom boot and working i have not done much testing yet but here is a few screen
Sent from my SM-T310 using XDA Free mobile app
what software have been removed?
Except for a few rebooting during initial registration at wlan and google account, is working very smooth.
safariking said:
Hello xda,
Here a first build cwm flashable for the T310 based on official 4.4.2
WARNING:
- I DON'T HAVE THIS TABLET
- IT MAY NOT BOOT
- IT IS UNTESTED
- I DON'T EVEN KNOW IF THERE IS A CWM RECOVERY AVAILBLE TO FLASH THIS!!!
Features:
- Based on T310XXUBNE9 (Official)
- Flashable
- Odexed
- Not Rooted
- Stock as possible
- Removed some stock apps about 10 or so!
Download:
Build 1: https://mega.co.nz/#!bwZHRQAZ!vhWLw3CzY3VBtuS6zg_eDpM4-dZGHe7ftbQ4n5SNEbo (~1,07GB)
Screenshots:
Not availble...
Changelog:
Build 1:
- First release!
Click to expand...
Click to collapse
jamax80 said:
what software have been removed?
Click to expand...
Click to collapse
Like gamehub musichub helpapp abd those things but not much
Sent from my GT-I9105P using XDA Free mobile app
Richcar said:
Ok the rom boot and working i have not done much testing yet but here is a few screen View attachment 2810023View attachment 2810024View attachment 2810025View attachment 2810027View attachment 2810028
Sent from my SM-T310 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for testing
Sent from my GT-I9105P using XDA Free mobile app
@ Safariking do you have plans to update this rom with root some mods and may be customization
Edit: tomorrow I'll try and root it and see if I can replace or port over some apps from the Note 3 and other stuff.
Sent from my SM-G900T using XDA Free mobile app
Love the ROM. Thanks for the hard work.
Just a quick question to anyone trying this rom, how do you root it? In general I think the rom is great but I am having problems rooting it.
Thanks for the advice and help.
---------- Post added at 10:06 AM ---------- Previous post was at 09:36 AM ----------
Cpt_Chaos said:
Love the ROM. Thanks for the hard work.
Just a quick question to anyone trying this rom, how do you root it? In general I think the rom is great but I am having problems rooting it.
Thanks for the advice and help.
Click to expand...
Click to collapse
Somehow it seems that this rom has some issues trying to use TWRP recovery. When I switched to Philz, I had no problems other than the 1 time WLAN crash and reboot of WLAN. After that, everything went well (including root)
Build 2:
- Zipaligned
- Rooted
- Debloated
- Deodexed
Will be up in 2 days
Sent from my GT-I9105P using XDA Free mobile app
safariking said:
Build 2:
- Zipaligned
- Rooted
- Debloated
- Deodexed
Will be up in 2 days
Sent from my GT-I9105P using XDA Free mobile app
Click to expand...
Click to collapse
I'll be happy to test build 2. build1 seems very stable in its functionality but it does have some small issues like when you try to root and install the super user. it tells you to update the superuser su binary, but when it tries to, it fails.
but other than having rooting issues, the Rom seems very stable. well at least what I could test in one day.
keep up the good work. I look forward to permanently upgrading to KitKat soon.
Cpt_Chaos said:
I'll be happy to test build 2. build1 seems very stable in its functionality but it does have some small issues like when you try to root and install the super user. it tells you to update the superuser su binary, but when it tries to, it fails.
but other than having rooting issues, the Rom seems very stable. well at least what I could test in one day.
keep up the good work. I look forward to permanently upgrading to KitKat soon.
Click to expand...
Click to collapse
Thanks for testing man !
Cpt_Chaos said:
Love the ROM. Thanks for the hard work.
Just a quick question to anyone trying this rom, how do you root it? In general I think the rom is great but I am having problems rooting it.
Thanks for the advice and help.
---------- Post added at 10:06 AM ---------- Previous post was at 09:36 AM ----------
Try to find and download the file: UPDATE-SuperSU-v1.99.zip from this forum. Put it in the external SD card together with the ROM downloadd from this thread. I used TWRP 2.7.1 recovery without any issue. After wiping data/factory reset, install the ROM, then without booting the SuperSU file mentioned above, then boot into system and the tab will be rooted,
Click to expand...
Click to collapse
Im not an experienced tester, but I did find something that I find annoying.
Every time I reboot. I get the message that I mounted an SD card and when I try to download a file from the Webbrowser or for example Dropbox, the I don't have the ability to navigate and download the file into the SD card. It only gives me directory options for the internal card.
Another bug I found is that when I try to change the system fonts in the Display setting, the Settings menu crashes and the other fonts options are not displayed
Build 2 is up
Happy flashing
see changelog in OP for changes
https://mega.co.nz/#!ywRRWbDR!_3kshF_QqqwOgn2pbCfndZDsrB0qfDQQupZXE96eRfI
Cpt_Chaos said:
I'll be happy to test build 2. build1 seems very stable in its functionality but it does have some small issues like when you try to root and install the super user. it tells you to update the superuser su binary, but when it tries to, it fails.
but other than having rooting issues, the Rom seems very stable. well at least what I could test in one day.
keep up the good work. I look forward to permanently upgrading to KitKat soon.
Click to expand...
Click to collapse
Yeah I had the exact same issues with SuperSu, in the end I used this http://download.clockworkmod.com/superuser/superuser.zip via TWRP.
Applied the External SD Card write fix for apps.
On another note, I've found TitaniumBackup runs slower & is a little buggy on 4.4.2 than on 4.2.2, & when I did a batch restore of all data to apps, it ran very slow & eventually produced a frozen black screen, needed to reboot then I was hit by a "System UIDs Inconsistent" popup.
Decided to run a data to app restore individually the next time after I set up again, seemed safer.
Gilly10 said:
Yeah I had the exact same issues with SuperSu, in the end I used this http://download.clockworkmod.com/superuser/superuser.zip via TWRP.
Click to expand...
Click to collapse
SuperSU doesn't working for me too, solved as Gilly suggested.
smanq said:
SuperSU doesn't working for me too, solved as Gilly suggested.
Click to expand...
Click to collapse
Finally got SuperSU working, I flashed the http://download.chainfire.eu/450/SuperSU/UPDATE-SuperSU-v2.00.zip via TWRP, rebooted & then went into the app, it'll say something about disabling KNOX, say yes, now when it give's two options of updating the binary select the TWRP/CWM option instead of Normal, it'll reboot into Recovery to do it's thing, now when you reboot the system, SuperSU should work as normal.
TitaniumBackup also seems to play nicer with SuperSU on 4.4.2, I now have no constant superuser permission notifications like I had with Koush's Superuser app when batch restoring, plus batch restore is a lot faster/smoother now too because of that.
Gilly10 said:
Finally got SuperSU working, I flashed the http://download.chainfire.eu/450/SuperSU/UPDATE-SuperSU-v2.00.zip via TWRP, rebooted & then went into the app, it'll say something about disabling KNOX, say yes, now when it give's two options of updating the binary select the TWRP/CWM option instead of Normal, it'll reboot into Recovery to do it's thing, now when you reboot the system, SuperSU should work as normal.
Click to expand...
Click to collapse
When prompted to disabling KNOX, I've choosed Cancel: it works fine (when I coosed OK, it stuck on trying...).
smanq said:
When prompted to disabling KNOX, I've choosed Cancel: it works fine (when I coosed OK, it stuck on trying...).
Click to expand...
Click to collapse
Guess it varies then, main thing it works :good:
play store app doesn't work
This Is Important:
The LockScreen will work on both locked and unlocked bootloaders. If you cannot run a custom kernel then do not wipe the dalvik cache or you will get Sytem UI FC. If you want to run xposed you will have to disable stock lockscreen by setting lockscreen type to none. Then you will have to download a third part lockscreen app. Do this before you install xposed or wipe the dalvik cache. If your on unlocked bootloaders make sure you are running one of the custom kernels in post 2. Only use these kerenls in post 2 or your camera will not work. Stock MMS requires some mods to get working. Hangouts MMS works fine.Do not try and update SuperSU in this rom either by flashing or through the playstore. SuperSu on android 5.1.1 will try to install systemless root which requires a kernel mod which will fail during install. Since we are still using a 5.0 kernel SuperSu need to be installed the old way which takes some modding to achieve. I installed the latest SuperSu 2.71 so this should work fine. but for some reason if you want an earlier copy installed make sure its no higher the SuperSu 2.52.
malbert16442 presents
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Give new life to your Galaxy S5!
Orginal Thread Here!
Note5Port screenshot:
Rom is based on N5 FRAMEWORK AP2 base deodexed
Non Aroma
Spen N5 Air Command blurred
EDGE SCREEN BLURRED 100%
X posed Compatible
Pre Rooted
Stock Deodexed
Buildprop tweaks
Zipaligned
Stock firmware
Stock Apps
Alot of optimizations
Screen shot..
Flashlight..
Record in power menu
Fast
All multi-window apps
Battery friendly @ShinySide for kernel
300+fonts
Working video editor
Working N5 features
Working S Note
Work Photo Editor
UHD: Increased to 70Mbits from 48Mbits.
FHD: Increased to 30Mbits from 17Mbits.
FHD_60FPS: Increased to 60Mbits from 28Mbits.
HD: Increased to 17Mbits from 12Mbits.
SLOW MOTION (1/2): Increased to 17Mbits from 12Mbits.
SLOW MOTION (1/4): Increased to 17Mbits from 12Mbits.
SLOW MOTION (1/8): Increased to 8.5Mbits from 6Mbits.
Increased to 30:00 Minutes from 5:00 Minutes for UHD. (Maximum recording upto 4GB = 8 Minutes)
Increased to 30:00 Minutes from 10:00 Minutes for FHD_60FPS and DUAL_FHD.
Note5:
v2
v1:
First Release
Note5/S6:
If you have a locked bootloader and are using Xposed Fingerprint and Lockscreen Must Use 3rd Party App
Stock MMS Does Not Send Follow This Guide To Fix
If you find one tell it to me with a PM.
Tested only on G900V
ROM Downloads:
VZW_PURE_NOTE5_V2.zip
@malbert16442 For His Base Rom
Addons/Mods Can Be Found Here
Kernels for Dev Phones Only With Camera fix
New kernel stock.zip
Packaged_Kernel.zip
Shinies kernel.zip
VerizonPB1.zip
First
Sent from my SM-N920C using Tapatalk
---------- Post added at 04:03 PM ---------- Previous post was at 04:03 PM ----------
Don't know how you are porting to lock bootloader but hey good work
Sent from my SM-N920C using Tapatalk
malbert16442 said:
First
Sent from my SM-N920C using Tapatalk
---------- Post added at 04:03 PM ---------- Previous post was at 04:03 PM ----------
Don't know how you are porting to lock bootloader but hey good work
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Thanks for your roms. They have gave VZW S5 some new life
We do not deserve you!
Actually, sent my from sm-G900v running Toxic
Sent from my SM-G925V using Tapatalk
Installed the rom with FF , it took 5 minute to reboot ,set cm locker , fix the mms , installed xposed , everything working like a charm ! . What a wonderful Rom ,slim and very fast ! Thank you guys for amazing job @malbert16442 and @jrkruse !!!
---------- Post added at 09:46 PM ---------- Previous post was at 09:05 PM ----------
alin919 said:
Installed the rom with FF , it took 5 minute to reboot ,set cm locker , fix the mms , installed xposed , everything working like a charm ! . What a wonderful Rom ,slim and very fast ! Thank you guys for amazing job @malbert16442 and @jrkruse !!!
Click to expand...
Click to collapse
The battery life seems to be very good !
alin919 said:
Installed the rom with FF , it took 5 minute to reboot ,set cm locker , fix the mms , installed xposed , everything working like a charm ! . What a wonderful Rom ,slim and very fast ! Thank you guys for amazing job @malbert16442 and @jrkruse !!!
---------- Post added at 09:46 PM ---------- Previous post was at 09:05 PM ----------
The battery life seems to be very good ! Due to that, should we update the baseband ?
Click to expand...
Click to collapse
I would make sure all your firmware is PB1
jrkruse said:
I would make sure all your firmware is PB1
Click to expand...
Click to collapse
I assume we can not use the customs kernels from the main site due to our lock bootloader ..... it could confuse someone .......
alin919 said:
I assume we can not use the customs kernels from the main site due to our lock bootloader ..... it could confuse someone .......
Click to expand...
Click to collapse
I thought that was pretty obvious. I assume by now everyone that has a verizon s5 know this but I will edit post 2 to state this
jrkruse said:
I thought that was pretty obvious. I assume by now everyone that has a verizon s5 know this but I will edit post 2 to state this
Click to expand...
Click to collapse
Less bricked device
very weird, upon flashing this rom and installing it and doing everything i manage to get the 4g going and it shows that it has near full bars, on usa band with lte/cdma auto (prl) in testing/info and lte/cdma in mobile networks, yet when i try to make a call it wont allow me at all saying its out of service area gsm service shows emergency calls only but the 4g works as far as data goes, when i switch to band 6 it only gets to 3g and everything works, when i choose wcdma preferred i am not able to select the band mode 6
sorry im high
copkilla858 said:
very weird, upon flashing this rom and installing it and doing everything i manage to get the 4g going and it shows that it has near full bars, on usa band with lte/cdma auto (prl) in testing/info and lte/cdma in mobile networks, yet when i try to make a call it wont allow me at all saying its out of service area gsm service shows emergency calls only but the 4g works as far as data goes, when i switch to band 6 it only gets to 3g and everything works, when i choose wcdma preferred i am not able to select the band mode 6
Click to expand...
Click to collapse
I have same problems on toxic rom , been trying to install for 7 days with same result ( no voice or data ). What i did , full wipe in FF check wipe internal storage too , install rom + wipe . Reboot and set Gmail account like new device , no data no app restored , all unchecked or set new email for backup & restore account .
Do not try and update SuperSU in this rom either by flashing or through the playstore. SuperSu on android 5.1.1 will try to install systemless root which requires a kernel mod which will fail during install. Since we are still using a 5.0 kernel SuperSu need to be installed the old way which takes some modding to achieve. I installed the latest SuperSu 2.68 so this should work fine. but for some reason if you want an earlier copy installed make sure its no higher the SuperSu 2.52.
jrkruse said:
I would make sure all your firmware is PB1
Click to expand...
Click to collapse
To make sure all firmware is PB1,I need To flash pb1_rom without bootloader? My baseband is still OK3
Sent from my SM-P600 using Tapatalk
buhohitr said:
To make sure all firmware is PB1,I need To flash pb1_rom without bootloader? My baseband is still OK3
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Pb1 firmware no bootloader update . Here :https://www.androidfilehost.com/?fid=24438995911970805
Is this rom has issue with screen dimming after a phone call?
Sent from my SM-P600 using Tapatalk
buhohitr said:
Is this rom has issue with screen dimming after a phone call?
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
It got fixed about 80% but It's a lot better then toxic ROM .
buhohitr said:
Is this rom has issue with screen dimming after a phone call?
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Yes. If you put brightness on auto ot wont do it. Or if it dims just double click power button to bring back broghtness
Stocked Vwz Messenger App
@jrkruse question here why is it that i try to load Verizon messenger App from Play Store it says "your devices is not compatible" ? I love using Verizon Messenger app. because i can save my text messages and reload as i try different roms that you and others have to offer. I also found out that i am unable to save my messages with Stock messenger app too. I too can not restore my Messages with stock messenger app. NO I do not like other messenger apps because they do not save and restore my messages from my sd card the way it has always been. if there is a stocked messenger apk that i can load via FF or Root Explorer then please share that with me and others here that too may want to have this app. Please. Thank you for all your hard work in making all of here in VZW S5 happier with everything that you do for us.
WORK IN PROGRESS!!!!!!!
Echoe Rom for snapdragon USA
G935/G930 s7e/s7...
Aroma Edition...
Aroma installer options..
Choice of edge or flat..
Choice of carrier (Att,tmo,spr,vzw)
Choice of boot animation..
Mod Options...
Ux N7 apps..
N7 camera..
3 pages of app debloat options..
And more...
Deodexed
De-knoxed
De-bloated (mildly)
Rooted
Viper4/atmos
AdAway
Doze
Cpuspy
Fastergps
Root tool
Flasfire
Echoe control app
3Minit Battery
3Minit Clock
Custom Echoe boot animation
+ more to come
INSTALLATION:
MUST BE ROOTED!
1. Install Flashfire by @Chainfire from play store.
2. Make sure zip file is on ext sdcard as this will wipe user system, user data, int sdcard
3. Open Flashfire app (agree to terms) then press the red plus button in lower right corner and select flash zip file.
4. On the next pop up screen press the check box in the top right corner.
5. Scroll to bottom left corner and press the lighting bolt to flash and click OK on popup.
*****FIRST BOOT TAKES ABOUT 10-15 Total istall 15-20 MINUTES*****
Strongly Recommend Full Wipe!!!!
May reboot several times let it do it's thing!!!
Download link...
https://www.androidfilehost.com/?fid=24651430732237755
Kernel source:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=G935
List of awesome users who donated....
@gaww
@br3w3r
@anrchy666
@scottbrocker
Mine
Sent from my SGH-M919 using XDA-Developers mobile app
#2
Sent from my SGH-M919 using XDA-Developers mobile app
#3
Sent from my SGH-M919 using XDA-Developers mobile app
+1
Installing now and will try to report back any issues, fall semester has started so my time is limited.
I do have a question however. Which is the newer version? v1_2 or v3?
saxile said:
Installing now and will try to report back any issues, fall semester has started so my time is limited.
I do have a question however. Which is the newer version? v1_2 or v3?
Click to expand...
Click to collapse
V3?
This just made my night...as long as there are no connectivity issues I'm hitting this up right away...
mattinky11 said:
This just made my night...as long as there are no connectivity issues I'm hitting this up right away...
Click to expand...
Click to collapse
Let us know how it goes....
Running fairly flawless at the moment. Only been on for about 3 hours but at this point everything seems to be working. Thanks to the devs for this, I've been waiting for a rom to root and this one doesn't disappoint.
Sent from my SM-G935U using XDA-Developers mobile app
---------- Post added at 05:59 PM ---------- Previous post was at 05:50 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935U using XDA-Developers mobile app
Would be awesome if flashfire was a decent workaround for a locked BL. Just bought this device Saturday, so not ready to flash this but looks promising!
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
I flashed this with flashfire, but am running the eng bootloader for root
Sent from my SM-G935U using XDA-Developers mobile app
Does this have the Lag Fix or do we need to still flash it separately?
....my set up for now....
****EDITED****TO-ADMIN****
****PLEASE REMOVE POST IF POSSIBLE****
****pic attachment did not post in this comment. can this post be removed by an admin? id hate to take up space in the thread.****
my set up
just a heads up, after flashing this it would be advised to turn auto updates off in the play store. after flashing the su app was updated and i lost root. also i have xposed installed and activated all my current modules and encryption at boot enabled. after a reboot i kept getting system ui has stopped working i had to fight through until i could eventually get to settings and turn encryption off. i dont get the sys ui problem at boot anymore but it happens randomly still but not often. also with xposed i turned some modules i dont need off like adblocker and clarity along with a couple others and everything is running pretty good now. the main problem is not turning the auto updates off so su doesnt update and you loose root along with the encryption. that may be just me but it was a pain getting constant sys stopped pop ups until i could turn it off. anyway, nice rom! looking forward to future updates. would like to see your other bootanimation without having to reflash the rom though. im using the second one with the floyd playing....nice.
---------- Post added at 04:22 PM ---------- Previous post was at 04:13 PM ----------
any plans to add wifi calling for any carriers if possible? im on at&t and use the wifi calling at work and home. mostly at work because i dont get a signal in the lab and rely on the wifi.
---------- Post added at 04:29 PM ---------- Previous post was at 04:22 PM ----------
sorry just got home from working overnight so busy on here. is there an system app that was removed in the rom or one we had an option to remove during flash that would stop samsung apps from upgrading? well the apps upgrade fine its the themes and theme store that wont. i get an error -19 trying to update the theme store and i have two themes that keep trying to update and error out
Been running this for about 24 hours now. Holy crap my phones works so much better! First rooted rom I've ran and haven't had to flash govtuner. You're the man!!!
rob219 said:
just a heads up, after flashing this it would be advised to turn auto updates off in the play store. after flashing the su app was updated and i lost root. also i have xposed installed and activated all my current modules and encryption at boot enabled. after a reboot i kept getting system ui has stopped working i had to fight through until i could eventually get to settings and turn encryption off. i dont get the sys ui problem at boot anymore but it happens randomly still but not often. also with xposed i turned some modules i dont need off like adblocker and clarity along with a couple others and everything is running pretty good now. the main problem is not turning the auto updates off so su doesnt update and you loose root along with the encryption. that may be just me but it was a pain getting constant sys stopped pop ups until i could turn it off. anyway, nice rom! looking forward to future updates. would like to see your other bootanimation without having to reflash the rom though. im using the second one with the floyd playing....nice.
---------- Post added at 04:22 PM ---------- Previous post was at 04:13 PM ----------
any plans to add wifi calling for any carriers if possible? im on at&t and use the wifi calling at work and home. mostly at work because i dont get a signal in the lab and rely on the wifi.
---------- Post added at 04:29 PM ---------- Previous post was at 04:22 PM ----------
sorry just got home from working overnight so busy on here. is there an system app that was removed in the rom or one we had an option to remove during flash that would stop samsung apps from upgrading? well the apps upgrade fine its the themes and theme store that wont. i get an error -19 trying to update the theme store and i have two themes that keep trying to update and error out
Click to expand...
Click to collapse
Samsung apps update auto unless you remove the Samsung store I don't believe it can be changed unless it's like the play store where you can choose your update options...
As for SuperSU unless you change the option in play store no way to stop it unless there's an option in the su app itself.
jds3118 said:
Samsung apps update auto unless you remove the Samsung store I don't believe it can be changed unless it's like the play store where you can choose your update options...
As for SuperSU unless you change the option in play store no way to stop it unless there's an option in the su app itself.
Click to expand...
Click to collapse
yeah i turned updates off on the play store thats why i mentioned it. and i dont know whats up with the samsung theme store it wont update, just fails.
rob219 said:
yeah i turned updates off on the play store thats why i mentioned it. and i dont know whats up with the samsung theme store it wont update, just fails.
Click to expand...
Click to collapse
Yeah that's odd mine updated right away...