My first issue with the phone. I was playing around with the lockscreen as I was bored. Normally I don't keep my phone locked. After setting a lock pattern and setting all the smart lock features I decided to disable the lock. Originally I had it set to swipe. When I went in to the Screen Lock setting screen to put the phone back on Swipe I could not. It was disabled. In fact the only options I could choose were Pattern, Pin and Password. I disabled all the smart lock features but that didn't help. I restarted the phone and that didn't help either.
So now I can't disable the lock screen. Anyone know what up?
I read that clearing credentials fixes the issue so I tried it. Nope, didn't fix the issue.
OK, for ****s and giggles I cleared the credentials again and now I have all the unlock options. I don't understand why that was happening but who cares.
THANK YOU THANK YOU THANK YOU!!! Just like you, I normally do not use a lock screen. But I was visiting family and left my phone out to charge, so I added the pattern password and then it would not allow me to turn it off - all I had was Pattern, Pin and Password. After clearing the credentials, I gained access to be able to disable the pattern lock. Thanks again!!!
Can anyone confirm whether this happens to them. I have fingerprint lock with either a pin or pattern as backup.
If on the lockscreen I swipe the screen rather than use the fingerprint lock the pin/pattern screen comes up with the blurb "Use Fingerprint or draw unlock pattern" However when i then put my finger on the scanner it doesn't register, its as if i haven't put my finger on the button. The only way I can access is via inputting pattern/pin. Once i have done this i can repeat by locking the screen and swiping and the reader registers.
However if i leave the phone for 10-15 minutes it then goes back to not registering the fingerprint on the pin/pattern screen again?
Anyone else getting this?
Getting the exact same issue on the Galaxy S7Edge with Australian firmware, and it completely ruins the usefulness of the fingerprint unlock method.
It's definitely a bug in the software - a few people have already experienced the exact same issue we have encountered over at:
http://forum.xda-developers.com/verizon-s7-edge/help/fingerprint-reader-half-lockscreen-t3341574
Hopefully Samsung are at least aware of the issue and can patch it..
I had something called lock screen launcher or something like that I did uninstall it and it was normal again
Sent from my SM-T700 using Tapatalk
I unlocked my phone normally several times today using my pattern. Five minutes after I had unlocked it, I picked it back up and drew my pattern and it said it was incorrect. I tried several more times with no change. I was able to unlock the phone using my fingerprint, but I have no idea how my pattern changed without my permission. If my phone dies or restarts for any reason, I will need the pattern to unlock it, as you can't use fingerprint on start up. (I've had the same unlock pattern since my last phone, so I'm sure I am putting it in correctly.)
Has anyone else encountered this bug? Is there any way to create a new pattern using my fingerprint? Finally, how should I go about reporting this to Samsung?
Thanks.
Yes!
Same thing happened to me... S7 working great for first few days when suddenly it didn't accept my unlock pattern. I've been using the same pattern for awhile and unlocked the phone a few times that morning. After a few reboots it finally accepted my pattern again. Immediately disabled it and now using pin instead.
stevecr25 said:
Yes!
Same thing happened to me... S7 working great for first few days when suddenly it didn't accept my unlock pattern. I've been using the same pattern for awhile and unlocked the phone a few times that morning. After a few reboots it finally accepted my pattern again. Immediately disabled it and now using pin instead.
Click to expand...
Click to collapse
Did you just restart again and again until it worked? If it worked for you I might try it instead of the factory reset.
I've had lock screen issues with my LG V10, but not quite like yours. I use a pattern, not a password or fingerprint. Sometimes the screen is locked and I fail the pattern and the phone gets unlocked anyway. Usually, this is associated with having first touched a notification with the screen locked. What happens after the pattern fails (trace shows in red), is that the screen appears as it does when it's not locked and I just swipe and I'm in the application whose notification I touched. The LG V10 has a fingerprint reader on the power button, but I haven't programmed it since I heard it's not that great. This is a major security issue in my opinion, and I haven't read any other posts anywhere about it. So I don't know if it's specific to LG, the V10 or Marshmallow (it started with Marshmallow).
I can start a new thread if you believe our lock screen problems are unrelated (enough). Just let me know.
Bruce
Same thing happened to me. I'm THE ONLY one to ever use my phone and I went to open it and it was saying my pattern was invalid. I was able to use the thumb print pattern still though. However when I went to change the pattern in my settings I entered what used to be my pattern and it locked me out of my phone for an hour. I don't know how to change it.
bluefire2128 said:
Same thing happened to me. I'm THE ONLY one to ever use my phone and I went to open it and it was saying my pattern was invalid. I was able to use the thumb print pattern still though. However when I went to change the pattern in my settings I entered what used to be my pattern and it locked me out of my phone for an hour. I don't know how to change it.
Click to expand...
Click to collapse
Saw you had the same issue, so wanted to let you know. I restarted the phone and the old pattern started working again. Another person with this issue said that they had to restart several times, but it did work. So I'd give that a try, worked for me. Good luck!
It just happed to me. I restarted it and it accepted my pattern. I now have it set with pin instead.
Had the same issue as well! Samsung Galaxy S7, suddenly stopped recognizing my screen unlock pattern. Same solution as well; Restarted my phone and the problem went away.
Is there a way to disable the pattern feature if you are able to navigate the phone? Got locked out of Marshmallow on my MOTO G 3rd gen. phone after a pattern change; I was surprisingly able to just reboot into an unlocked phone. I've turned on adb debug access while I still have the opportunity.
I just had that issue. I was able to unlock with the pin, and reset the pattern and it now works again but it was freaky.
Same happened here. This morning the lock pattern on my S7 edge is forgotten by the phone.. Reboot doesn't help.
have the same problem today. i didn't change my pattern and it happened again. before i was using a PIN and I ended up factory reset and by this time I wouldn't want to do the reset factory settings as the last option.
The pin was also randomly stop working, I have mine set to pin and it did the same thing.
Me too!!!! Wtf!!
Mine has locked as well and I swipe the wrong pattern until it gives me the option to put in the back up pin but when I go to correct the swipe it wont let me in. I have tried everything all of you have suggested except the factory reset, I just can't believe that Samsung hasn't put out a fix for this yet.
Here is how you fix it
Method 1. Use 'Find My Mobile' feature on Samsung Phone
All Samsung devices come with "Find My Mobile" feature. In order to bypass Samsung lock screen pattern, PIN, password and fingerprint, you can just follow the below steps to get it done.
• First of all, set up your Samsung account and log in.
• Click "Lock My Screen" button.
• Enter new PIN in the first field
• Click "Lock" button at the bottom
• Within few minutes, it will change lock screen password to the PIN so that you can unlock your device.
tell me it work ??
Just an update to help out someone who might be going through this. This recently happened to me on my s6 edge.
Like the above comment suggests, go to "Find My Mobile". Once signed in, select the "UNLOCK MY DEVICE" option , (selecting the "Lock My Screen" option does not allow you to change the lock screen type afterwards).
Selecting Unlock my device will immediately unlock the phone and erase any lock screen patterns, fingerprints or pins that you might not remember, thus allowing you to set them up again!
Hope this helps!!
---------- Post added at 08:38 PM ---------- Previous post was at 08:35 PM ----------
Also, one more thing. Doing the above ^ seemed to have solved a problem I was having with "Smart Lock" not working. So just as an FYI, going through that process might help you with that.
This just happend to my gf's s4 also she sent a text and then went to reply again a few moments later and her pin was invalid and it locked her out of her phone for 30 seconds, she just had to restart it once and it worked with the old pin again.
brobbeh said:
I just had that issue. I was able to unlock with the pin, and reset the pattern and it now works again but it was freaky.
Click to expand...
Click to collapse
same issues here, pattern just stopped working. im positive im using the correct pattern.
i can login with my pin, but i cant reset the pattern as it keeps asking for the current pattern.
how can i reset the pattern or change to pin / fingerprint?
ive restartted 2x and trying a 3rd now....
> Use 'Find My Mobile' feature on Samsung Phone
No this didn't work. It still requires my pattern, and tells me I'm doing it wrong...
It DID let me into the phone, which was nice. But the pattern problem persists...
...Update: I restarted the phone, and it came up and accepted my pattern.
This just happened to me on my phone and my tablet. I wound up having to do a factory reset on both! Way to go Samsung. These are the last Samsung devices I'll ever buy.
Stock Android One - 9 (MiA1)
So I had a password on my phone and a fingerprint lock. I used the fingerprint lock to unlock the phone and on restart it would ask me the password. All was good.
At some point I removed the screen lock altogether. I don't have a screen lock now and I'm able to enter the phone without prompt just fine even on boot,
Except, now I want to enable the screen lock again and it asks me to re-enter the password. Now the old password doesn't work and I could swear I didn't really touch it when removing the screen lock.
I'm able to do everything on my phone, except setup a screen lock. What is up here? And how do I setup a screen lock now or reset the password?
Not sure of the fix.
I got locked out of a PC bios like that ie the password spontaneously became corrupted.
I set passwords for accounts only, not devices and this illustrates why.
It may indicate a hardware failure or maybe just a firmware glitch. See if there's a default password for that model... a service center may be able to help.