Database Info

Extreme Guard for HTC Sensation

I just wanted to post my experience using Extreme Guard on my Sensation.
Installation took about 25 minutes, overall it wasn't that hard.
The most challenging aspect/cons were:
1. The small holes for the microphones/noise reduction are so small and hard to remove without stretching the plastic or making the plastic look kind of white/funny.
2. I am not sure if it was just my cutout piece but the middle back section wasn't pre-cut very well and I ended up with some jagged edges on the back because of this.
3. The screen protector looks slightly beat up on angles after 2 days. This is mostly my fault as the rubbery texture does feel really nice and I would tap my nails on it kind of just holding the phone. I realized after at an angle I can now see a scuffed up surface on the coating.
4. No protection for the outer rims on the phone.
5. Make sure to remove the plastic where any tiny holes are our it WILL effect your audio quality. (at first I missed the microphone hole and thought my mic was bad cause people complained how I sounded) this was fixed as soon as I removed the cover from that small hole.
Now for the Pros:
1. Installation overall went smooth.
2. Once it cures although it looks shiny and doesn't have 100% coverage it does make the phone feel alot more solid and gripable(honestly I though I would drop the phone with it's standard material.
3. The touch screen works fine with the thicker material over it but does have a slightly rubbery feeling.
4. At first I thought it looked horrible and I messed the whole thing up. I followed directions and used soap and water to apply. It was hazy some slight air bubbles and overall looked horrible in all aspects. I let it go for about 2-3 days and as promised it dried out and there is no more bubbles or haziness. I am really impressed how it turned around, it's really a snug clear fit on the phone.
Overall I would suggest getting this if you don't mind the glossy look and the lack of coverage around the rim of the phone. I think the grip alone will save the phone from a nasty fall and certainly protect the screen if dropped.
I hope this helps someone. I can't post a link because I am new here but you can easily find it on ebay.

Pics or it didn't happen

Ill see what I can do for pix...I sold my old phone so this will be a challenge as I don't have a digital cam. However I am noticing the screen protector through use is getting slight marks in the plastic from my nails. I don't have long nails at all...just normal length for a Guy but just the slight tapping on the screen(protector) causes visible marks when the screen is dimmed.
Sent from my HTC Sensation 4G using XDA App

Nillkin Fresh: Review

Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:

Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.

jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star

N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...

N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....

I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.

It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star

Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta

Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.

jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta

The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star

I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.

Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?

Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star

Lifeproof clone from ebay review

Part 1
I got it for around 22 dollars with free shipping from china on ebay. There are quite a few listings for it.
First, it's obviously a fake. My wife has a real lifeproof iphone5 (yes I live in a split household). Her lifeproof has some rubbery aspects to it, this one's rubber is a bit more stiff and isn't as pliantthis one is made all of plastic. The clip at the bottom is slightly loose, but it has a similiar rubber in-lay to keep the phone dry.
Up close of the front. Came with a sticker over the prior galaxy s3 (lol). You can see I pealed it off to see what it said.
Back
The front of the box opens up with a flap. The middle image is what's on the top flap. The bottom is the main box - a window into what the case looks like.
Opening it, we have the case and this card is behind the case itself. There is a waterproof earplug adapter of course.
Inside of the top aspect of the case.
Everything inside of the box. A small manual.
Top and bottom parts put together.
Placing it in water and putting a couple double shots on top to keep the case down.
After taking off the double shots, it rose to the top, no visible water inside of it.
I found no water after 6-7 minutes minutes of submersion with 2 double shots on top
Fake lifeproof next to Seidio Obex
Part 2 I will report sound quality after using it for a couple days.
Stay tuned! Ask any questions I'll try to answer them for you.
Took about 3 weeks to get it.
As far as the two cases go, I prefer the obex at this point. It's rubber is softer and has a better feel. Although I complain about Obex's easily damaged case and protector, I think this one is no better. I just shouldn't put expensive cases with my keys ever. Although I never had a problem with keys + defender or keys + tpu case / cheap screen protector - so go figure.
For 22 dollars and waiting 3 weeks, it's cheap.
Since I use my phones for work and work tends to get a bit messy, I need splash protection and shock protection, running up stairs, bodily fluids splashing etc. Also the occasional cell phone drop into the urinal or toliet has occured.
My phones are warrantied through verizon, so I don't mind taking the chance with this case. Hopefully, I don't loose a device to water damage lol.

How is the audio quality? The obex i had on my s3 produced horrible audio quality.

Prime said:
How is the audio quality? The obex i had on my s3 produced horrible audio quality.
Click to expand...
Click to collapse
Sound is okay, minimally diminished but it's better than the obex. Don't get the vibration type sound interference.
The distance from the screen to the screen protector feels about 2-3 mm's. Doesn't register all touches easily and well, it's a bit further than my wife's life proof.
Cut outs are spot on.
The back of the case has a bit of design. After feeling the case more, there isn't really any rubberized parts. it's just more plastic. Compared to my wife's definitely cheaply made - as to be expected.
Unlike the seidio obex where they use a rubber overlay on the home button - the home button on this lifeproof knockoff is just covered by the screen protector albeit it's black with a circle around it. My wife's lifeproof iphone5 is similiar but has an indention to the home button.
The volume rocker and power buttons are slightly off and take about 2-3 hard pushes to get a response.
Haven't had a chance to take a call with it yet. Will test it later today.
Had a couple phone calls. People can hear me without a problem. Haven't noticed any issues with it.
So in regards to the positives:
1) Sound seems to be basically intact, both microphone/speaker.
2) Waterproof - Case does appear to have the same or similiar waterproofing sponge-like material for the seals.
3) Cheap
Negatives:
1) Cheaply made (lol) compared to the real life proof, no rubber aspects to the external case.
2) Clip at bottom doesn't clip in as tightly as I would want it to, might just be this case though.
3) The Volume rocker is in the right place but needs a harder than usual push on it to work, so you'll push it 2 to 3 times to get it to respond.
4) The Power button is situated feels 0.5 mm to 1 mm below where it should be and also requires harder pushing.
5) Screen protector doesn't come in contact with the phone directly, there is about 2 mm gap, most of the touches register, about 95 percent or so. If you touch something at the edge, it's more lightly it won't register.
What I didn't test:
1) the water test for 1 hour, I did it for about 6-7 minutes like the obex recommended.
2) any drops, the plastic seems a bit brittle and stuff, I imagine that the case would probably crack or break, possibly transmit shock forces directly to the phone - doubt it's 6 feet drop rated as a knock off.
Compared to the Obex:
Prefer the obex, feels better in hand, better screen response. Sound is a little off on the obex, but I do think it offers better protection from a real fall and serious submersions.
Recommendation:
I would recommend this case for anyone who's on a budget <25 dollars and wants something that's going to be basically waterproof.
Otherwise, go find something else - bfree? Obex? Or wait for the real lifeproof to come out.
Here's a few ebay links:
http://www.ebay.com/itm/Waterproof-...Cell_Phone_PDA_Cases&var=&hash=item4d10397178
US location
http://www.ebay.com/itm/Waterproof-...Cell_Phone_PDA_Cases&var=&hash=item3cd5113bdb

just got mine from newegg for 20 bucks. idk why i got the green one but i did lol. anyway its water proof. andddddd i can hear ppl fine on it and ppl can hear me fine and its VERY light. i had a trident kraken on it before which was very heavy but protected it like a beast.

jerrah said:
just got mine from newegg for 20 bucks. idk why i got the green one but i did lol. anyway its water proof. andddddd i can hear ppl fine on it and ppl can hear me fine and its VERY light. i had a trident kraken on it before which was very heavy but protected it like a beast.
Click to expand...
Click to collapse
Link please? 3 weeks sounds like a long wait I want my case now! Torn between Lifeproof obex and now love mei which I found isn't waterproof smh...
Sent from my SGH-M919 using Tapatalk 4

http://www.newegg.com/Product/Product.aspx?Item=9SIA1PU0ZX3701 it came in less then 2 days from cali to ny

[SPAM] Poetic Affinity Case (lots of pics) <UPDATED>

I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine) from the link below. Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
<MODERATOR EDITED - SPAM REFERRAL LINKS DELETED>
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for two reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.

rice923 said:
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Price: It's $10 on amazon. Not expensive, not cheap. Pretty normal pricing.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for three reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
3. I'm not a fan of the logo smack in the center of the back, especially when the original Nexus logo is obstructed. Considering there are three total logos/labels on the case, this one should've been omitted.
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
Click to expand...
Click to collapse
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.

Elnrik said:
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Click to expand...
Click to collapse
After I get my "x only" Dbrand skins, it should look more acceptable. I'm probably still gonna end up making a true bumper out of this down the road[emoji1]
Sent from my Nexus 6P using Tapatalk

UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine). Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case

I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
I've been using this case for the past few days. I received the "updated" version that has the P above the fingerprint reader.
I enjoy the overall feel of the case. I like the ridges on the sides, it really allows you to get some grip on the phone, I feel less likely to drop it.
The buttons feel nice and click nicely, but because of the ridges I have a harder time finding them (and determining power from volume keys) when I'm not looking at the phone. I'm sure this will get easier over time.
I like the clear plastic on the back, I'm running mine stock without any skins, but it's still nice to see the faint nexus logo from the graphite version. As you mentioned that it felt like a snug fit, mine actually feels a little loose in some places, like the top and bottom.
The opening for the finger print reader is larger than the scanner, and I actually prefer this to one the same size as the reader. I feel like it's easier to find and unlock, and recognizes a little easier
Sent from my Nexus 6P using Tapatalk

heleos said:
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Absolutely fine by me! It's a review thread and you have some thoughts about the same product. All good
Sent from my Nexus 6P using Tapatalk

I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk

diomark said:
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Something sounds fishy about that. Never had that problem even once. Also, it takes a fair amount of effort and coincidence to butt dial on a 6p. Gotta press the power button, followed with a way to unlock the device, then precisely press the dialer icon, and choose someone to call. You may want to look into it a bit deeper. I've never butt dialed a single person since owning any smartphone in any configuration in the past 5 years.
Sent from my Nexus 6P using Tapatalk

I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk

diomark said:
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I see. Sounds like all the planets aligned. If you decide you still want to use the case, I would recommend actually shaving down the inside of the button (the side that physically touches the power button of the phone). That should cut back on the sensitivity, but it's effort that I don't know if you'd like to invest.

Design of the Poetic Affinity has changed
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.

Bhalraam32 said:
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Click to expand...
Click to collapse
Yep its nice. I still need to return my old ones.

good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.

Lord. Tech said:
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Click to expand...
Click to collapse
It actually has good protection for as thin as it is due to the way its built. Very sturdy case.

Can I put selotape on the back & sides?

Hi, It might seem like a stupid thing to do but having read that the back cover of the Pixel 2 is very prone to scratches and scuffs, I wanted to do something about it. I use my Pixel in a standard TPU case but my previous Pixel has got a few scuffs on the sides and back even though it was always in a good quality (Spigen) case. Grit must somehow creep in and rub between the case and the phone back and sides.
So I decided to stick wide selotape over the back and sides of the phone! I cut-out around the camera, charge port and small pin holes top and bottom and found that the fingerprint reader still worked when covered! I just folded the tape around the corners and covered over the sim slot and power/volume buttons. It doesn't need to look pretty as the case hides it all. It all seems to work perfectly!
My only thought is will it cause any heat issues or will the selotape react in any way? It will probably leave a bit of residue when i remove it but that can easily be cleaned off using something like GooGone?
I would be interested to hear anyone's thoughts as while it seems like a good idea, i'm not entirely sure!

Sounds like what you're trying to do is exactly what a skin can do for you.
These are the 2 most popular options:
https://www.slickwraps.com/
https://dbrand.com/
Difference between them may be the cutout? I hear Dbrand has a more precise cut meanwhile Slickwraps has much more color options and styles.
Though if you don't want any color or design and just want a naked look, Slickwraps has the naked series but it's currently not available yet. Maybe later? Regular Pixel had it so I don't see why Pixel 2 wouldn't receive it.
BONUS: Going on right now too with Slickwraps is that they're giving a FREE glass screen protector with any order AND 30%(Code: FLASH) if that interest you.
Hopefully this helps.