First of all , Hello, The problem I have is that I had blocked the pattern Security , and did not remember the email that had been introduced in the Account. After many attempts to enter into recovery mode , and failed way of emergency , as no ingresarm could , flashing by chose starting with recovery.img and that if I could do a hard reset , now the problem that I have is that I need boot.img and original p500h splash.img lg . ( img boot is the one the LG logo appears and then the android symbol appears with a blue light spinning on it. ) I had gotten one seems be updated , but does not work is in the logo of LG .
Thank you, sorry for my bad english.
Related
well, it's not the first time that happens to me . other times it happened to find my moto g in bootloop . I always solved with the same tutorial.
This time , however , it does not work .. I tried several tutorials on the internet ( all of them, exactly as the one i used a lot of times, said to connect your phone to the PC in fastboot and write commands ) but they didn't work . It remains in bootloop . and it always displays the warning screen "unlocked bootloader..." or the normal boot logo of Motorola.
please help ! thank you in advance
(sorry for bad english)
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
i don't know the main reason for that problem , i mean it may be due to some application which "obviously" cannot delete it , and ofcourse because i have let the tab for my young brother
sorry for inconvenience and my bad English too
ANYHELP ???????????
diabycool said:
Hey there,
I have complicated problem here ,
Model : Gt-P5100 samsung galaxy 2 10.1 (16gb)
ROM: Stock 4.2.2
main problem : Boot-Loop
__________
for some reason , the device is stuck in a boot loop , i have managed that problem 4 monthes ago by falshing stock rom
But Now , it didn't work, nor any other method mentioned here or any forum !!
1-Tried to flah Stock ---- didn't work
2-another stock ---didn't work
3-changed the version of stock ----didn't work
4-changed odin version ---didn't work
( i have also problem getting into download mode by key combo , so i used 300k tool !! , and recovery shows a dead android and wipe cache option gives an error !!)
throughout flashing , it gives at the middle of the process red "FAIL!" , with log error below nand start sh** , complete(write) operation failure !
after taking 40 minutes approximately !!
_____
5- I flashed a PIT , with a success , boot loop still there
6- I flashed recoveries , which didn't change the recovery i have with the dead android and error and e3 !!
7-I got black screen and tablet wouldn't turn on or charge anymore ( I think i forgot it in downlod mode untill full discharge !!)
8- I have opened it and removed the black cable of power and while it was in adaptor , that thing weirdly worked !!
9- But i still in boot-loop !!
10- I've used Cygwin to turn the rom into seperate "TARS" so i can flash them seperately with the right order >
11-as i remember flash sbl,boot modem ,recovery ,cache ,,,all success !!
12-getting to system.tar it took along time , and it has the failed with the same error write failed !!!!
____________________________
now i think technically every software problem has some solution , but what i have missed , any other solution or advice ??
please help , i don't see my stuff bricked without a fix
Click to expand...
Click to collapse
I can't change my rom, wipe / format doesn't work. Nothing changed after flashing with Odin.
16 GB Tab 2 have a known faulty EMMC (MAG2GA). It can happen, that your EMMC get "read only", so you can't perform any write actions (also you can't format) anymore.
From the EMMC data sheet:
5.1.7 End of Life Management:
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation are still allowed.
But, reliability of the operation can not be guaranteed after end of life.
On a faulty EMMC firmware it happens a lot faster.
What are the symptoms?
Uninstalled apps and deleted files are back after a reboot
Formating the storage doesn't work (after reboot the old rom and apps are back)
You can flash whatever you like via Odin - it showes "passed" but after reboot nothing changed (e.g. still no StockRom or still the old Recovery you had previously installed)
... there might be some more, but only to mention some ...
In most cases, the issue can be fixed by a EMMC firmware update, but you need someone who's able to do it (possible via ISP, nothing you can do esylie at home yourself). In some bad cases you need to find someone who can replace your EMMC.
source: andi34.github.io
Hello
I need the help of someone that can make IMG file to boot my phone in a specific environment where I can check the sensors of my phone.
After beeing a bit wet .. my phone seems to be ok , except that when booting in normal mode it's systematically locked ( as with a cover with a window ) .. so I do not have any options to go in android itself and play with the parameters & sensors
I can boot my phone in the recovery mode where Fastboot is usable ( as my device is in the visible ) ...
I can for example do a fastboot boot twrp.img ... to boot with TWRP .....
In fact I would like the same with another IMG file to get a interface to check all my phone sensors ... and especially the proximity one that is responsible for the "cover lock" which is , I guess , my issue ...
I think that the proximity sensor is dead or is always "saying" it's covered by something
When I'll know a bit more about the status of the sensor(s) ..
The next step is , again with the help of someone that can modify System.img ( ? ) , so the proximity sensor is disabled when starting the phone ... which ( I hope ) will avoid the lock screen and allow me to recover the usage of my phone
I don't know if it's important , my phone is a Honor 5x
I really hope there are some guru's out there that will be kind enough to take a bit of their time to help me
I'm not at that level of playing with IMG files ( building / modifying it )
Hello guys
For information .... while searching a solution for my phone ...
I found a list of available roms for my honor 5x ... and when reading the specs of those roms ... I was really attracted by the info saying that on CM13 .. the "clever lock" was NOT YET supported ....
No more time to download all the needed files
Starting TWRP via fastboot ...
installing the zip files from the SD
and waiting quite long for the first boot ..
---> WOW very happy ... I am , my honor 5X is booting and not falling immediately to a "lock screen" ...
What's more strange ... it's that the proximity sensor is working fine ( tested via several applications , and while a call is done )
So I would still have a question for you , guys :
Does someone could explain me why I got that "clever lock screen" on the stock or LineageOS ?
Thanks
Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool
I have followed the post of how to unlock bootloader on every G7 devices ( I currently using G710N version ) , I somehow almost success , but now I'm stuck in fastboot mode , no way out , the phone doesn't allow me to boot , and when I connect it to PC and write those ADB codes , it keeps saying " Waiting for devices ... " , or says nothing and starts a new code line , now I just wanna go back to the stock , but if some kind people help me out , maybe I can continue to finish the flash rom process . Guys please , I'm really panicking right now
Are you getting download mode?
Can you atleast enter download mode ?
Try this, it worked for me
[HOW TO] Recover from any hardbrick or red case in 9008 mode without ANY BOXEs
Well guys, its finally here!! You can finally unbrick your device without any jtag,medusa, octopus box!! DISCLAIMER: IM NOT RESPONSIBLE IF THIS DOES SOMETHING BAD TO YOUR DEVICE WHICH IT SHOULDNT. WARNING: THIS WILL DELETE EVERYTHING IN THE...
forum.xda-developers.com
I have mentioned in the guide ... after you finish the process you have to flash the KDZ firmware for your phone model in order to restore it