[Completed] Lenovo A6000 stock rom support - XDA Assist

Hi,
I have accidentally formatted system partition of my Lenovo A6000.
Using fastboot i had booted twrp on device, but accidentally factory reset, now the device has no os.
My device has stock recovery installed and also i can boot in twrp recovery using fastboot boot command.
Device can't boot in download mode, and connecting to pc it shows qualcomms usb diagnostic 9091. Hence, i can't flash stock rom using lenovo downloader or qfil.
All i can do is can boot in twrp via fastboot.
Please, help in this context.

Hi,
Try posting your question here:
http://forum.xda-developers.com/t/lenovo-a6000
The experts there may be able to help.
Good luck!

Related

[Completed] G2 LS980 32GB fastboot mode started error

Plz!!! Help me ! sry for my english,i tried to flash twrp recovery with autorec apk at my g2 ls980,but i flashed wrong d802's twrp recovery,then my ph show "fastboot mode started..." stucking at it,fastboot mode
well work,i can type fastboot
commond,now i m trying to go
back to stock firmware and
when i entering download
mode,my device doesn't detect
at my computer,i tried to flash laf.img,but when i join my ph in downloading mode,the device does not detect and appear in device manager.
Plz guide me,Sir!
Hi, thank you for using XDA Assist. I would flash the stock firmware and start the process all over. See this, http://forum.xda-developers.com/sprint-g2/general/how-to-restore-downgrade-install-t2863050. Also, if you have further questions see your device's specific fork here, http://forum.xda-developers.com/sprint-g2
Thread closed.

[Completed] problem came on installing stock and custom recovery

I have Lenovo A6000 and I have installed stock recovery by minimal adb and fast boot software .
In the bootloader sceen I have successfull flashed stock recovery (not corrupted because installed it before and was working ) but while rebooting to recovery menu it stuck on boot loop,
then I have installed TWRP recovery image successfully by Minimal ADB fastboot, and same result came.
So I have decided to install stock rom by fastboot software from bootloader .
After wiping data by below command
fastboot -w
followed by
fastboot update <stock.zip>
An errom came and says no android-info.txt found.
What it is???
Please give us a way to install Stock ROM because no recovery is working.
Hi,
Thanks for using XDA assist.
I found a helpful thread that may help you solve your problem:
The Long Waiting Lollipop For Lenovo A6000 / Plus
If you follow the guide, you may be able to access your recovery.
Alternatively, you can post in the Android Q&A, Help & Troubleshooting forum as there is no dedicated thread for your device. Please note that in order to post, you will need to create a XDA account.
Good Luck! - gsstudios

[Completed] Unable to load CWM/TWRP and misssing recovery partition

I've been searching around XDA and other forums for a while and have been unable to find a solution
TLDR; I am unable to flash a custom recovery with MTK droid tools, SP flash tool, Flashify, Fastboot, Rashr, CWM magic, TWRP magic, CWM app, TWRP app and now i no longer have a recovery on my phone, not even the stock
Phone: Huawei Y360-U23
Android: Kitkat 4.4.2
Kernel: 3.4.67
So here goes, I wanted to flash cwm recovery as i have with my previous android phones, however it is unsupported on the CWM list, I also tried TWRP, my device is also unsupported.
-I did some reading around and found some guides on how to use MTK droid tools to back up and then SP flash tool to change my recovery
- I encountered errors but was able to fix most EXCEPT, Zero error, no space left on device , tried the recommended busybox fix and ensured all drivers were properly installed but did not help
- Fastboot gives me the error "remote partition 'recovery' not support flash"
- SP flash tool wouldnt do anything after i pressed the download button
- TWRP magic tool flashed my recovery mod but could not back up, but failed
- CWM magic tool flashed my recovery mod but when a backup was attempted this error was received " could not open /tmp recovery.log"
- Flashify and Rashr both failed to flash recovery
I tried to flash my recovery with the TWRP magic tool a final time but now my phone won't boot into recovery at all.
Please offer any help you can, it would be greatly appreciated
SirFitz said:
I've been searching around XDA and other forums for a while and have been unable to find a solution
TLDR; I am unable to flash a custom recovery with MTK droid tools, SP flash tool, Flashify, Fastboot, Rashr, CWM magic, TWRP magic, CWM app, TWRP app and now i no longer have a recovery on my phone, not even the stock
Phone: Huawei Y360-U23
Android: Kitkat 4.4.2
Kernel: 3.4.67
So here goes, I wanted to flash cwm recovery as i have with my previous android phones, however it is unsupported on the CWM list, I also tried TWRP, my device is also unsupported.
-I did some reading around and found some guides on how to use MTK droid tools to back up and then SP flash tool to change my recovery
- I encountered errors but was able to fix most EXCEPT, Zero error, no space left on device , tried the recommended busybox fix and ensured all drivers were properly installed but did not help
- Fastboot gives me the error "remote partition 'recovery' not support flash"
- SP flash tool wouldnt do anything after i pressed the download button
- TWRP magic tool flashed my recovery mod but could not back up, but failed
- CWM magic tool flashed my recovery mod but when a backup was attempted this error was received " could not open /tmp recovery.log"
- Flashify and Rashr both failed to flash recovery
I tried to flash my recovery with the TWRP magic tool a final time but now my phone won't boot into recovery at all.
Please offer any help you can, it would be greatly appreciated
Click to expand...
Click to collapse
Hello,
You may try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Vatsal said:
Hello,
You may try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Click to expand...
Click to collapse
Thank you

[Completed] Lenovo a526 stuck at "lenovo" logo

Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Hi mr__gutz
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
mr__gutz said:
Greetings, my lenovo a526 is stuck at lenovo logo.
I already tried wiping cache in stock recovery, but in wipe data/factory reset it says default data flag fail something like that.
Reboot, im still stuck
Then i tried flashing stock rom using spft it was successful yet still stuck at logo.
So I thought i should flash twrp or cwm recovery to install custom rom in sd card
I used adb fastboot. To flash those recovery because my stock recovery doesn't have "install zip in sdcard"
In fastboot,
My device is detected when i execute
Fastboot devices
"mt6582_phone --- device"
I cannot flash cwm or twrp directly because when i do it says remote partition does not support flash.
I believe i need to unlock bootloader first.
So i execute
Fastboot oem unlock
The result is 3 dots loading like forever
Now im in a dead end, i know i have to confirm it in my device but it has no display only logo.
Please, i need help. Is there any way to execute fastboot oem unlock without confirming in my device?
Click to expand...
Click to collapse

lenovo a6000 looping in boot logo (solution please)

device : lenovo A6000
I'm using custom ROM for some years..now i flashed android pie (havoc 2.0) for device built using twrp . it flashed successfully but it started looping in boot logo (LENOVO POWERED BY ANDROID ) . when i try to flash stable rom using twrp again it started boot looping. now i'm not able to goto twrp. so i flashed stock rom using QFIL it say firehose error. when I try with QcomDLoader tool it says "passed" and successfully flashed . when i try to boot it ..again boot logo looping.. but this stock recovery was working.
but I'm not able to flash twrp using adb sideload or fastboot .. it showing error.
what Can i do NOW ?????
please help me
H2H Harish said:
device : lenovo A6000. I'm using custom ROM for some years..now i flashed android pie (havoc 2.0).........
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Havoc Firmware thread that's specific to your device for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3841003
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

Categories

Resources