My yureka is acting funny
I was running Blisspop v4.0.3 on my rooted Yureka, i decided to flash Marshmallow so i made a backup of my rom and i flashed marshmallow,
Everything was fine, besides the fact i lost my root access for some reason, so i downloaded the supersu v2.46 and flashed that using twrp and i rebooted my device
but it got stuck at the cyanogen boot screen and it was just on that screen itself, so i went back into recovery and and flashed the file again and wiped cache and dalvik cache again but it didnt help
Please help me.
XDA Visitor said:
My yureka is acting funny
I was running Blisspop v4.0.3 on my rooted Yureka, i decided to flash Marshmallow so i made a backup of my rom and i flashed marshmallow,
Everything was fine, besides the fact i lost my root access for some reason, so i downloaded the supersu v2.46 and flashed that using twrp and i rebooted my device
but it got stuck at the cyanogen boot screen and it was just on that screen itself, so i went back into recovery and and flashed the file again and wiped cache and dalvik cache again but it didnt help
Please help me.
Click to expand...
Click to collapse
Hello,
You need to reflash your rom and enable root from Developers Option. Also for Marshmallow you need to use SuperSu v2.65
You may register for XDA account to post and reply in forums.
-Vatsal
Related
Hello,
I have bricked my Moto G XT1033 after i wiped out all data and system files.
I had saved a recovery image and after wiping out i can't see it anymore.
since i'm a noob in this can someone help me out ?
Thanks
If you wiped system, you have no OS, so your phone can't boot up.
Since Moto G has no external memory and you wiped data, all of your stuff including your backup was gone.
You need to reflash firmware.
Take a look in Original Development threads.
thewerthon said:
If you wiped system, you have no OS, so your phone can't boot up.
Since Moto G has no external memory and you wiped data, all of your stuff including your backup was gone.
You need to reflash firmware.
Take a look in Original Development threads.
Click to expand...
Click to collapse
Thanks alot
Fixed it with by installing the stock firmware
How to install it?
i had the same problem and i am searching for help please answer this question is an emergency
I am unable to flash stock firmware.
I am getting a error " Package expects build fingerprint of Motorola falcon_asia_ds/falcon+umtsds: 5.0.2/LXB22
This device has motorola/falcon+asia_ds/falcon_umtsds: 4.4.2/KX
Please suggest right rom to flash.
I am rooted with boot loader unlocked and using Clockwork mod recovery v 6.0.4.7
I can access recovery.
aumshethia said:
I am unable to flash stock firmware.
I am getting a error " Package expects build fingerprint of Motorola falcon_asia_ds/falcon+umtsds: 5.0.2/LXB22
This device has motorola/falcon+asia_ds/falcon_umtsds: 4.4.2/KX
Please suggest right rom to flash.
I am rooted with boot loader unlocked and using Clockwork mod recovery v 6.0.4.7
I can access recovery.
Click to expand...
Click to collapse
Access Bootloader Flash latest version of twrp on ur device connect to pc Via MTP mode nd transfer ur rom to it and flash it
Hi I managed to flash 4.4.4 rom and everyting worked fine
Now i did OTA update and after OTA completed installing, the moto g went blank... completely dead.
Please help how can i get my bootloader back ??
I had Archdroid installed in my phone .I have flashed it with nameless rom android 5.0.My phone model is GT-I9300 Samsung galaxy s3. Every time I wipe all data,and catche and flash this new rom its stuck in, boot loop.I tried installing nameless rom android 4.4.4 and again flashed it without wipe everything ,still its stuck in boot loop.I just wanna install this rom and want to get that awesome lollipop android 5.0,no matter what !!.Developers help me out guys!!!I want it so badly
XDA Visitor said:
I had Archdroid installed in my phone .I have flashed it with nameless rom android 5.0.My phone model is GT-I9300 Samsung galaxy s3. Every time I wipe all data,and catche and flash this new rom its stuck in, boot loop.I tried installing nameless rom android 4.4.4 and again flashed it without wipe everything ,still its stuck in boot loop.I just wanna install this rom and want to get that awesome lollipop android 5.0,no matter what !!.Developers help me out guys!!!I want it so badly
Click to expand...
Click to collapse
Maybe you have to stick to the installation instructions of the ROM you want to flash.
Please ask in the ROM thread, or in the [HELP THREAD] Galaxy S3 Ask any question. thread.
There you will get quick and proper help.
Thread closed and thank you.
Hello everyone,
I have just upgraded manually my Yureka to CM12.1 Nightly and rooted/unlocked bootloader of the device and flashed with CWM recovery now I tried to rollback to original CM12 using the below mentioned method but could not do so.
Here is what I tried and the results I got:
Installed CM12.1 using following method:
http://forum.xda-developers.com/yure...icial-t3086007
BY varun.chitre15
1. Rooted and installed Custom recovery
2. Installed update CM12.1 Nightly
3. Upgraded successfully
Now here is what happened when I tried to rollback to original CM12:
1. Flashed the original recovery, this installed successfully after which I cleared the partition cache and dalvik
and booted again to recovery and saw that the custom recovery still persisted there.
2. Still I tried to update the CM12 original update but It failed immediately as it started the process giving the error: Installation failed !
Also checked the MD5 checksum and it also matched.
Can anybody help me with the procedure to rollback to the original CM12 ??
Regards,
Shailendra Singh
[email protected]
shailzworld said:
Hello everyone,
I have just upgraded manually my Yureka to CM12.1 Nightly and rooted/unlocked bootloader of the device and flashed with CWM recovery now I tried to rollback to original CM12 using the below mentioned method but could not do so.
Here is what I tried and the results I got:
Installed CM12.1 using following method:
http://forum.xda-developers.com/yure...icial-t3086007
BY varun.chitre15
1. Rooted and installed Custom recovery
2. Installed update CM12.1 Nightly
3. Upgraded successfully
Now here is what happened when I tried to rollback to original CM12:
1. Flashed the original recovery, this installed successfully after which I cleared the partition cache and dalvik
and booted again to recovery and saw that the custom recovery still persisted there.
2. Still I tried to update the CM12 original update but It failed immediately as it started the process giving the error: Installation failed !
Also checked the MD5 checksum and it also matched.
Can anybody help me with the procedure to rollback to the original CM12 ??
Regards,
Shailendra Singh
[email protected]
Click to expand...
Click to collapse
Hi, thank you for using XDA Assist.
Its just that you have to flash official CM12ROM with a custom recovery installed. Links can be found [YU Yureka][ROM][OTA] Mirrors for official Cyanogen roms & OTA updates
For any more questions visit YU Yureka Q&A, Help & Troubleshooting
Good luck.
I HAD A ROOTED MOTO G4 PLAY WITH ANDROID 6.0.1 WITH TWRP AND I INSTALLED SOME TOOLS, REBOOTED AND I GOT FLASHING BLUE AND BLACK SCREEN SO I WENT INTO TWRP RECOVERY AND I ACCIDENTALLY WIPED THE SYSTEM OFF MY PHONE!!!! PLEASE HELP!!!! I NEED TO GET AN OPERATING SYSTEM BACK ONTO MY ANDROID ASAP!! PLEASE PLEASE PLEASE HELP!!!:crying::crying:
mat383 said:
I HAD A ROOTED MOTO G4 PLAY WITH ANDROID 6.0.1 WITH TWRP AND I INSTALLED SOME TOOLS, REBOOTED AND I GOT FLASHING BLUE AND BLACK SCREEN SO I WENT INTO TWRP RECOVERY AND I ACCIDENTALLY WIPED THE SYSTEM OFF MY PHONE!!!! PLEASE HELP!!!! I NEED TO GET AN OPERATING SYSTEM BACK ONTO MY ANDROID ASAP!! PLEASE PLEASE PLEASE HELP!!!:crying::crying:
Click to expand...
Click to collapse
Download and flash any custom Roms via twrp, or find a tutorial and revert back to stock.
Download recommend framework to your phone and flash it
Sent from my SHV-E210S using Tapatalk
sachin n said:
Download and flash any custom Roms via twrp, or find a tutorial and revert back to stock.
Click to expand...
Click to collapse
Thanks! i was able to find myself lineage os and successfully installed it. thanks for the advice!
I wanted to install cutom rom in my Mi4i working on MIUI 8, so I installed TWRP from toolkit , which also installed SuperSU.But I don't know if my bootloader was unlocked or not?
I saw in a youtube video to flash MIUI 6 first to install Custom rom or you might endup in BOOTLOOP.
In TWRP I wiped Dalvik,Data,Cache,System.
Went to INSTALL, tried installing MIUI6 but that package failed to install. Giving error unable to mount.
I tried custom rom crDroid and it installed but when I restarted I WAS STUCK IN BOOTLOOP.
After a heartattack I finally flashed MIUI8 with MiFLASHER using fastboot image of MIUI 8.
SO, I want to ask IS THERE A WAY TO INSTALL CUSTOM ROM ,IF I AM ON MIUI 8????
And that bootloop was caused beacuse I didn't unlock bootloader when I installed crDroid???
Thanx in advance. Please somebody help???
singharpit800 said:
I wanted to install cutom rom in my Mi4i working on MIUI 8, so I installed TWRP from toolkit , which also installed SuperSU.But I don't know if my bootloader was unlocked or not?
I saw in a youtube video to flash MIUI 6 first to install Custom rom or you might endup in BOOTLOOP.
In TWRP I wiped Dalvik,Data,Cache,System.
Went to INSTALL, tried installing MIUI6 but that package failed to install. Giving error unable to mount.
I tried custom rom crDroid and it installed but when I restarted I WAS STUCK IN BOOTLOOP.
After a heartattack I finally flashed MIUI8 with MiFLASHER using fastboot image of MIUI 8.
SO, I want to ask IS THERE A WAY TO INSTALL CUSTOM ROM ,IF I AM ON MIUI 8????
And that bootloop was caused beacuse I didn't unlock bootloader when I installed crDroid???
Thanx in advance. Please somebody help???
Click to expand...
Click to collapse
I would suggest you to install Resurrection Remix as it is based on miui8 firmware.
You were stuck in bootloop because crDroid was based on miui6 firmware and probably your installation of the same was failed ( Like you're saying )
Since you get "Heart Attack", Prefer clean install.
Wipe system, data, cache, dalvik cache.
Flash Rom, gapps,
Reboot to system.
Note:- To install custom ROMs based on miui6 firmware, first of all, flash the provided firmware in the thread instead of flashing the whole miui6.
Ask further if it doesn't work.
Hit thanks if helped.