Related
Hey guys here i just installed MIUIv5, everythings were work fine untill i got call. My friend can't hear my voice..
But i only suspect the internal mic that doesnt work becase when i change to the speaker phone mode my friend can hear me.
any help would be appreciated
###Extra Info
S-ON
HTCDEV
HBOOT2.00.002
kernel b2b/miuiv4_boot.img
###List of installation
1.ROM
2.Gapps
3.Kernel
4.Bootloader Flashing
reboot
zoker said:
Hey guys here i just installed MIUIv5, everythings were work fine untill i got call. My friend can't hear my voice..
But i only suspect the internal mic that doesnt work becase when i change to the speaker phone mode my friend can hear me.
any help would be appreciated
###Extra Info
S-ON
HTCDEV
HBOOT2.00.002
kernel b2b/miuiv4_boot.img
###List of installation
1.ROM
2.Gapps
3.Kernel
4.Bootloader Flashing
reboot
Click to expand...
Click to collapse
Have You flashed the Kernel from the .zip, or from another ROM? I see your kernel is for miuiv4, so maybe that's why your mic doesn't work.
NVardan said:
Have You flashed the Kernel from the .zip, or from another ROM? I see your kernel is for miuiv4, so maybe that's why your mic doesn't work.
Click to expand...
Click to collapse
negative
I've tried CM4.1.2-kernel-21_modded.zip but nothing changed.
FYI i'm just curious(it is custom and its appereance so beautiful ) so i tried the ROM and tested it, for now I already restored my phone to the latest backup before i install the MIUIv5.
But still if there is a solution to my kind of problem, please share here... maybe there will be another guy with the same problem comin here asking for the solution
thanks for replying :good:
I had the same problem with calls, but using either version from miuiandroid or en.miui works fine.
Sent from my Desire S
I am just using all from miuiandroid.com, also didnt change the kernel. All hw works good..
Hello SlimKat support,
I had an issue with Xiaomi Piston 2 headphones on the SlimKat ROM 7.2.1... OnePlus One recognize inserting it only one time of 10 inserting...
But with SlimKat ROM 7.4 headphones is not recognized at all I tried 20time insert jack, but OnePlus One did not recognize insertion any of try.
It was OK on the SlimKat ROM 7.0 (stable)...
It is an issue only with Xiaomi Piston 2 headphones... I just tried two other headphones I have at home and OnePlus One recognize them on 1st insertion :good:
Does somebody else have this issue with Piston 2 headphones? Thank you.
Works perfectly with 11s. Maybe they switched the key assignment.
Sent from my A0001 using XDA Free mobile app
reinstall or not reinstall... thats whats going on here...
Hi tssphysicsboi,
hm, that I was worried about...
I like SlimKat as light weigh ROM... so reinstall all apps and configure whole mobile again... uff
I would rather have fix for SlimKat then to give up on it :highfive:
Read more here http://forum.xda-developers.com/one...-kernel-r1-t2800871/post54826109#post54826109
Workaround included. The problem involves CM commits related to audio within the kernel. All ROMs/kernels update their commits on top of what CM already offers so therefore other ROMs/kernels will have this problem.
Short story:
Workaround: Slowly plug the jack half way in.... hear the music start outputting via headset (you have to have auto detect on insertion enabled) but and then a few seconds later I insert the jack fully in and then it works.
Click to expand...
Click to collapse
Can't really do much, use a older custom kernel if you want the phone to detect or do the workaround and be patient while CM works on it.
I use the Pistons myself, great headphones. Best $25 spent
When I use this reduction - http://shop.recall.cz/?cls=stoitem&stiid=7109 and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
unavix said:
When I use this reduction - http://shop.recall.cz/?cls=stoitem&stiid=7109 and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
Click to expand...
Click to collapse
Yeah a audio splitter works. Its a problem within the kernel related to CM commits. Its being looked into.
...
unavix said:
When I use this reduction - ... and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
Click to expand...
Click to collapse
Definitely issue with SlimKat ROM, because it works in other ROMs.
And the reduction means the ROM doesn't cooperate with the "extra" connectors on the jack.
zephiK said:
Yeah a audio splitter works. Its a problem within the kernel related to CM commits. Its being looked into.
Click to expand...
Click to collapse
Great news. Thank you.
djha53k said:
Definitely issue with SlimKat ROM, because it works in other ROMs.
And the reduction means the ROM doesn't cooperate with the "extra" connectors on the jack.
Great news. Thank you.
Click to expand...
Click to collapse
The problem is resolved now. Download a kernel with the newest commits, Franco r14 contains this new commit so its fixed.
zephiK said:
The problem is resolved now. Download a kernel with the newest commits, Franco r14 contains this new commit so its fixed.
Click to expand...
Click to collapse
what kernel? uff, where? How to install it?
I'm sorry, the One is my first Android mobile and I was so so happy I was able to replace CM11s with SlimKat... playing even with kernel... uff
Is there any step by step guide how to replace kernel on SlimKat?
edit: I think... I will rather wait for next build and install it as whole ROM update... then trying to hacking kernel...
djha53k said:
what kernel? uff, where? How to install it?
I'm sorry, the One is my first Android mobile and I was so so happy I was able to replace CM11s with SlimKat... playing even with kernel... uff
Is there any step by step guide how to replace kernel on SlimKat?
Click to expand...
Click to collapse
Its in original android dev franco kernel... download the zip r14 -> put it on your phone -> reboot to recovery mode -> flash it in TWRP and then reboot.
its very easy to do.... be sure to download the AOSP kernel variant since ur on SlimKat.
zephiK said:
Its in original android dev franco kernel... download the zip r14 -> put it on your phone -> reboot to recovery mode -> flash it in TWRP and then reboot.
its very easy to do.... be sure to download the AOSP kernel variant since ur on SlimKat.
Click to expand...
Click to collapse
OK, looks easy...
Where can I get that zip?
I tried search in the OnePlus One section of Kernels, but I got only "No results were found."
Thank you.
------
edit: OK, I found the franco.Kernel-nightly-r14.zip, but it seem to me it is only for CM11s (maybe for CM11 as well), but there is nothing said about SlimKat ROM... can I install then? Or I will brick my One? Thank you.
djha53k said:
OK, looks easy...
Where can I get that zip?
I tried search in the OnePlus One section of Kernels, but I got only "No results were found."
Thank you.
Click to expand...
Click to collapse
OnePlus One -> Original Development -> Franco Kernel r14.
zephiK said:
OnePlus One -> Original Development -> Franco Kernel r14.
Click to expand...
Click to collapse
Got it: http://forum.xda-developers.com/oneplus-one/orig-development/kernel-franco-kernel-r1-t2800871
Thank you very much :good:
Q&A for [ROM] [OFFICIAL] Dirty Unicorns 4.4.4 | v8.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
BUG
Bug from gps (signal lost )
Bug from baterry (need reboot for detect the usb loading )
Black screen in wake up but sound ok
Acrapovic 62 said:
Bug from gps (signal lost )
Bug from baterry (need reboot for detect the usb loading )
Black screen in wake up but sound ok
Click to expand...
Click to collapse
Use jira to report these issues as instructed in the OP.....
Also make sure you provide vital information to help troubleshoot these issues. Telling us that you have a bug doesn't really do much. Things like what kernel, version of the ROM, whether or not you're using Xposed and if you've done a clean or dirty flash is important
Thanks
This rom is awesome. Running great w/ Phantomr5
keyboard
so i just flashed this yesterday love this rom but for some reason the keyboard is not working is anyone else having this problem just wondering
Quicksettings
Hello,
Is it in the new Version possible to change the quicksettings in the notifications drawer alone? Or are joined these quicksetting in the notification drawer with the quick settings?
greets
I9300, DU and Bluetooth
Tried out the Dirty Unicorn ROM today, and was impressed. The only problem, Bluetooth.
My headset worked on the first attempt, but then that was that. In the car it wouldn't pair. It seems to be a general problem with the S3 and non-stock ROMs, and up till now I haven't found a solution.
With DU I got a connection, but no sound. Voice seems to work though. But as I said, the car didn't even pair.
Is there a solution to this problem, or do I have to live with no Bluetooth or only Samsung based ROMs?
Thanks in advance
_________________________________________
ROM: Blekota S5 Lite
Kernel: Stock
Sent from my GT-I9300 using XDA Free mobile app
So I'd like to ask if there Is a kernel supported by DU that contains Fauxsound?.
papaboner said:
so i just flashed this yesterday love this rom but for some reason the keyboard is not working is anyone else having this problem just wondering
Click to expand...
Click to collapse
Most likely due to flashing PA Gapps
Try wiping everything in recovery, flashing the ROM again and using a GAPPS package that doesn't remove the keyboard or it's libs
AdsinBRD said:
Tried out the Dirty Unicorn ROM today, and was impressed. The only problem, Bluetooth.
My headset worked on the first attempt, but then that was that. In the car it wouldn't pair. It seems to be a general problem with the S3 and non-stock ROMs, and up till now I haven't found a solution.
With DU I got a connection, but no sound. Voice seems to work though. But as I said, the car didn't even pair.
Is there a solution to this problem, or do I have to live with no Bluetooth or only Samsung based ROMs?
Thanks in advance
_________________________________________
ROM: Blekota S5 Lite
Kernel: Stock
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
This most likely was due to your headset. Is hard to say tbh
Is like headphones, some last forever and some die out and start to sound like crap after a few months.....
Mazda said:
Most likely due to flashing PA Gapps
Try wiping everything in recovery, flashing the ROM again and using a GAPPS package that doesn't remove the keyboard or it's libs
This most likely was due to your headset. Is hard to say tbh
Is like headphones, some last forever and some die out and start to sound like crap after a few months.....
Click to expand...
Click to collapse
The headset was bought in August and the car is about 2 weeks old. With Blekota ROM both work fine.
No the problem seems to lie in that Samsung don't like to do things in a standard way, and don't let on how they do it instead.
My question was more or less has anyone manged to reverse engineer the Bluetooth driver from Samsung and find a solution? There are many suggestions out there but up untill now I haven't found one that works.
Sent from my GT-I9300 using XDA Free mobile app
absence of network
i had converted my xt1033 moto g to xt1032 for the purpose of flashing the dirty unicorn rom. but after i first booted it i didnt get any network and dialer app wasnt working properly either(crashing). i have read the entire thread from top to bottom and found some fellow moto g xt1033 users who had wireless working.. i wonder what i did wrong because i followed the flashing guide to the letter. network doesnt work in xt1033 either.
For XT1031 Users...
If you're like me and you have the Boost Mobile Moto G and are fond of using the an alternative kernel with your ROMsl, perhaps you've been through an issue where you suddenly cannot connect to the mobile data network. Here is your fix for that. With your file explorer (having Root access, of course.), go to your build.prop which is located in System.
At the very bottom of all of the text, just simply add this.
telephony.lteOnCdmaDevice=1
Save changes and then reboot. I can now use Decepticon Kernel with this ROM.
no signal in xt1033
after flashing this rom network not detecting in xt1033.
error : "sim card doesn't allow connection to this network"
Did anyone try to add DU to multirom but fail?
I already try it but, no luck, do i need wipe all data rom on multirom?
some governor's parameters can not be modified, in spite of them being active. why is this? (pegasusq, ondemandX, and some others)
Van you provide some info about the governors?
Anyone tried to use ART with this rom? because when i convert to this runtime i lose all my google account :silly:
I don t know what I miss. But I can t find how to add dashclock widget on lockscreen (DU 8.1).
If anyone can give me a clue ! Thanks and happy Halloween !
Edit : found it. Had to check "activate widgets" in security menu.
Sent from my Moto G using XDA Free mobile app
Anybody else having music player fc when trying to play using BT audio?
adizz4 said:
Anybody else having music player fc when trying to play using BT audio?
Click to expand...
Click to collapse
Nope.
Mine works fine.
Alpha Omnirom 5.0 (Trying to get calls to work properly on CM first before doing more omni builds))
baseband is still unknown. So no phone calls or data.
Alpha Cyanogenmod 5.02 with working baseband
https://drive.google.com/file/d/0B4k5OpXTXcS9NF8zN1dreFAtOUk/view?usp=sharing
Build 5.0.1:
https://drive.google.com/file/d/0B4k5OpXTXcS9NVp0Sm9YMFdEUUE/view?usp=sharing
Calls should now work without lockups. Data seems flakey? Let me know your finding
(This is now working due to rolling back to old RIL blobs (pre 4.3). This means that the connection process takes longer on initial start-up and switching to air-plane mode as well. )
Leave wifi on to avoid reboots.
Also this doesnt have the camera bug fix yet that Derteufel made.
Nice.. Never been a fan of omni.. I'm more a cm or aosp person
Sent from my GT-I9305 using XDA Free mobile app
REVIEW
Thank you very much for this build for the i9305
I have been waiting for the first lollipop build
I installed this rom and this is a written review after one hour of usage
1 the phone boots without any problem
2 lollipop gapps are working
3 Sometimes wifi works and sometimes no
4 Bluetooth works
5 some random reboots and sometimes it stuck so I need to remove the battery to get it working again
6 no FCs at all
7 seems fast
8 when I open an app installe from play store the phone stucks and I remove the battery
Thanks again and I wish u improve this rom in the coming days
Good job mate but I think it'll be better to edit your thread to make something more attractive, Flash Guide for noobs , links to gapps, alternative dl links , what works, what doesn't , credits , shiet like this would be better for everyone.
The main problem of your rom seems to be the kernel (random reboots , wifi issues , random freezes)
Anyways , good luck and thank you for the rom
aaz03 said:
Good job mate but I think it'll be better to edit your thread to make something more attractive, Flash Guide for noobs , links to gapps, alternative dl links , what works, what doesn't , credits , shiet like this would be better for everyone.
The main problem of your rom seems to be the kernel (random reboots , wifi issues , random freezes)
Anyways , good luck and thank you for the rom
Click to expand...
Click to collapse
Thanks for the feedback.
This isnt meant for n00bs to flash yet. This is an alpha.
In Alphas you expect to get problems! This is only meant for testing and for trying out 5.0 on your device...
can we flash this normally?
CM 5.0.1 build added to OP. Please read notes about what isnt working before flashing!
So the latest build is the most stable one (CM12)? Can I help you in any way, testing, logs or something?
limnaln said:
So the latest build is the most stable one (CM12)? Can I help you in any way, testing, logs or something?
Click to expand...
Click to collapse
Well at this point in time no. I've just got to try to figure out whats going wrong still and then people can test to see if it works for them and if there is any long term problems with it. Until then its just make a change, compile and flash and I'll let people know if I get anywhere.
for me it is stuck on bootloop... first flashed wih wipe full/dalvik/cache then flashed gapps - bootloop. second dirty flashed again, booted, android is upgrading, optimizing apps, then rebooted and again bootloop... how to get past this ?
Tested. Boots okay. Data baseband ok. Incoming calls ok. Outgoing calls impossible. Tested with 2g
laurent.siku said:
for me it is stuck on bootloop... first flashed wih wipe full/dalvik/cache then flashed gapps - bootloop. second dirty flashed again, booted, android is upgrading, optimizing apps, then rebooted and again bootloop... how to get past this ?
Click to expand...
Click to collapse
As I said this doesnt have the camera firmware patch added so some people might get bootloops... I'll add this in the next day or two from Derteufel
infrag said:
As I said this doesnt have the camera firmware patch added so some people might get bootloops... I'll add this in the next day or two from Derteufel
Click to expand...
Click to collapse
So, we are at the final step - outgoing calls, huh?
There also appeared some new commits on nameless gerit, just informing
Outgoing calls can be made now. But it seems to lockup when hanging up. New link in OP for 'new' build.
Calls should now work!
This is using old ril blobs so initial connection from boot will take longer. Also I think data is stuffed a bit. Seems to take a long time to get connected. Seems to work for me after that though. Post your finding please!
Hopefully Derteufel can figure out the problem with the newer blobs but till then this is working if anyone is interested.
Edit: only got one question. Can wifi be turned off. Will disabling it cause bootloops?
infrag said:
Calls should now work!
This is using old ril blobs so initial connection from boot will take longer. Also I think data is stuffed a bit. Seems to take a long time to get connected. Seems to work for me after that though. Post your finding please!
Hopefully Derteufel can figure out the problem with the newer blobs but till then this is working if anyone is interested.
Click to expand...
Click to collapse
Yes, it does work indees! In and out! Really great, the whole system is smooth.
Great work. Will be swapping back to the i9305 from the note 2.. All we need now is for someone to work on the stock cm kernel to make it smoother.
Sent from my GT-N7105 using XDA Free mobile app
Great work on calls! Please let us know when you include the camera firmware fix so I can download again and flash, this is the only thing causing me bootloops and preventing me for further testing. Thanks
Sent from my GT-I9305 using XDA Free mobile app
winxuser said:
Great work. Will be swapping back to the i9305 from the note 2.. All we need now is for someone to work on the stock cm kernel to make it smoother.
Sent from my GT-N7105 using XDA Free mobile app
Click to expand...
Click to collapse
Stock kernel? We are only using that to get data working... I'm sure Derteufel will switch to his own kernel as soon as he irons out the problems with phone calls locking up etc. (Or he switches to old RIL blobs for now)
Then there will be the challenge of getting R4P0 drivers to work properly.
After that who knows? Fix opensource compass?
Then Nameless may have other upgrades to implement for HWC.
Hi i am currently using Cm12 Nightly 5.0.3 030315, With cm stock kernel. When i play audio thru my car Bluetooth it skips after ever 5 to 10 sec. If i watch video, the audio is delayed. The audio works perfect on regular bluetooth headset. The troubleshoot i did fix this problem so far.
Tried ever build after 02/21 till now still same thing.
I tried custom kernel like franco and elementalx. Did changes in hotplug while using franco kernel. Change Processor setting to performance under cyanogenmod. I have been trying find the fix but with no luck. The only thing that works is if i go back to cm11. Once i do that everything is normal.
Side Note, Every time i installed the Rom it was clean install.
Any help is appreciate at this moment. Thanks in advance.
No such issue here. Try full wiping and then reflashing CM.
thanks for reply. I did that several time. But with no luck. Any other suggestion ??
avalanch said:
thanks for reply. I did that several time. But with no luck. Any other suggestion ??
Click to expand...
Click to collapse
I recently had BT issues on CM12 and I do think that's a rom issue. Other users also reported bugs with BT.
Flash every nightly until the fix comes or switch to another custom rom for the moment.
Primokorn said:
I recently had BT issues on CM12 and I do think that's a rom issue. Other users also reported bugs with BT.
Flash every nightly until the fix comes or switch to another custom rom for the moment.
Click to expand...
Click to collapse
Thanks for that info. Good to know i am not the only one. I am on a mission of trying all the Cm12 Nightly from jan onward till today. Hopefully 1 of them will work... Any suggestion for most stable of nightly is appreciated. Thanks. Trying different roms too.
avalanch said:
Hi i am currently using Cm12 Nightly 5.0.3 030315, With cm stock kernel. When i play audio thru my car Bluetooth it skips after ever 5 to 10 sec. If i watch video, the audio is delayed. The audio works perfect on regular bluetooth headset. The troubleshoot i did fix this problem so far.
Tried ever build after 02/21 till now still same thing.
I tried custom kernel like franco and elementalx. Did changes in hotplug while using franco kernel. Change Processor setting to performance under cyanogenmod. I have been trying find the fix but with no luck. The only thing that works is if i go back to cm11. Once i do that everything is normal.
Side Note, Every time i installed the Rom it was clean install.
Any help is appreciate at this moment. Thanks in advance.
Click to expand...
Click to collapse
I have the same problem with a 32GB nexus 5 and the recent cm12 nightlies, I have found a dozen or so forums/pages about the problem but nothing that seems to help. I have tried flashing different radio.img file and different kernels, the problem only happens in my car, my bluetooth headphones and everything else works fine. My car can take phone calls but not play back music/audio from anything without skipping every 5-10 seconds for ~1 second
That's because CM team still don't get, that it's better to start building a house from the ground, then from the roof. It's a kernel related issue.