Hi everyone..
I apologize in advance for my bad english...however, my friend give me his phone(THL 5000) that have one problem..When i try to turn on it, appear "THL logo" on the screen...after 5 second, it turn off by itself and reboot again by itself. So, i tried to enter into "recovery mode", but it didn't work. I can't go into recovery mod.
What can I do then? I read some pages about "Android debug bridge". What I have to do? When I connect the phone to the computer, it disconnect immediately because it reboot continuously.
Can i repair the phone?
can anyone explain me how to use ADB(if I can, since I can't connect the phone to pc)? And which ROM do you recommended to download?
Thank you very much in advance!
xXNicolaXx said:
Hi everyone..
I apologize in advance for my bad english...however, my friend give me his phone(THL 5000) that have one problem..When i try to turn on it, appear "THL logo" on the screen...after 5 second, it turn off by itself and reboot again by itself. So, i tried to enter into "recovery mode", but it didn't work. I can't go into recovery mod.
What can I do then? I read some pages about "Android debug bridge". What I have to do? When I connect the phone to the computer, it disconnect immediately because it reboot continuously.
Can i repair the phone?
can anyone explain me how to use ADB(if I can, since I can't connect the phone to pc)? And which ROM do you recommended to download?
Thank you very much in advance!
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try to head over here
There are a few information and things which may help you.
Good luck!
Related
Hi,
I am new to this forum but quite sure someone will be able to help me. I got a LG LN790 GPS which by mistake got a file corrupted when connected to computer. Now it wont boot just the red power light glows for few seconds then switches off. Now when connected computer wont detect it. Tried soft reset but no help.
Can someone help me please to hard reset or how to load the boot file. One more thing I have another working one same model can this be of any help to copy any files from the working one.
Thanks in advance
ask here
http://www.gpsunderground.com/forums/showthread.php?t=5939
shaopc said:
Hi,
I am new to this forum but quite sure someone will be able to help me. I got a LG LN790 GPS which by mistake got a file corrupted when connected to computer. Now it wont boot just the red power light glows for few seconds then switches off. Now when connected computer wont detect it. Tried soft reset but no help.
Can someone help me please to hard reset or how to load the boot file. One more thing I have another working one same model can this be of any help to copy any files from the working one.
Thanks in advance
Click to expand...
Click to collapse
Welcome to the forum
Perhaps you did not noticed that this is an HTC devices only forum
Anyway good luck on your search,
This is HTC PPC's; you need to see the LG forums (as posted above).
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Well Bro it seems to like you had been bricked your phone
In this Forum You can find Way to unbrick your mobile
it may need to install new rom then it will be normal
http://http://forum.xda-developers.com/forumdisplay.php?f=656
http://forum.xda-developers.com/showthread.php?t=984140&highlight=unbrick
I think this would help you if so please click on Thank You Button
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
u had atleast 70% battery?
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
sound like u just killed ur phone try using adb to mannually install all software( im used to htc idk if applys to samsung)
adb flash flash your_rom.zip
do this in fastbootusb mode(bootloader)
i had the same problem
Did you fix it?
Sent from my GT-I9000 using xda premium
I need a Professional Answer to a Beginner user
tablooj said:
Dear Helpers
Please someone help me!
I was upgrading my phone and suddenly it stopped at 69%.
After that it asked me it if I want to make emergency upgrade, I tried it but unfortunately it didn’t work.
Now my phone is not starting at all, it just gives the logo of samsung and the model type. I tried to make a hard reset by click the buttons but it didn’t work.
It seems that the software is removed and no more software in the phone.
What shall I do ? Please advice!
Thanks in advanced!
Click to expand...
Click to collapse
Hello again;
Thanks for the fast responds but ...
I need a Professional Answer to a Beginner user.
I want to know how to fix my phone step by step from a to z
for example which applications i need to install on my computer to fix my phone etc.
anyone has patience to explain to me briefly?
well, at first you need odin
google odin android or sth like that and google odin pit file 512.
go to sammobile and look for the firmware you want to have (you need to register on sammobile.com to do this)
after that, make sure you have samsung kies installed, but NOT running (check via taskmanager-processes, if you see something with 'kies' in it, close that).
run odin
use pit file s1_odin_20100512.pit in pit tab
use CODE file in PDA tab
use MODEM file in PHONE tab
use GT-I9000-CSC... file in CSC tab
make sure the repartition box, auto reboot box, f.reset time box are checked (dump, phone efs clear, phone bootloader update NOT)
set your phone to download mode (hold volume down, home button an on/off button at the same time until the android with a shovel appears)
plug your phone via usb in to your computer, in odin should appear a yellow sign at ID:COM
hit start in odin
wait til its done
(i hope this works out, thats what i did, when i bricked my phone once)
i dont take responsibilty for damages on your phone!
you do this at your own risk!
ps: sorry for my bad english..
http://forum.xda-developers.com/showthread.php?t=1139050
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
I have the exact same problem, except my PC still recognizes it, I can't do anything else.
I'm not even able to make MTK tools nor SPFT recognize my phone...
A bit of help would grandly be appreciated :fingers-crossed:
Regards.
did you find an answer
dhcj said:
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
Click to expand...
Click to collapse
I saw on another forum that you solved your problem. Could you tell me how you did it?
fixed it.
boulabloubla said:
I saw on another forum that you solved your problem. Could you tell me how you did it?
Click to expand...
Click to collapse
Hi everyone.
sorry for late reply.
I used this rom.
download from here.
pan.baidu.com/share/link?shareid=519096060&uk=1966208364
try it. if its not working I will explain step by step how i did it.
:good:
Sorry I couldn't answer earlier, I was kinda busy.
Thank you for your help, I'll try it and get back at you right away.
Cheers.
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
boulabloubla said:
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
Click to expand...
Click to collapse
can you sent me a picture of your mobile. i want to check is it same as mine.
Here they are.
step by step
boulabloubla said:
Here they are.
Click to expand...
Click to collapse
Okay. its exactly same as mine.
go to this link and download the .rar file.
dropbox.com/s/066vyfzgxe5b5fa/MT6577_root_tools_pack.rar
1.
there is a pdf file. read the pdf file carefully and follow the Step 1 only. (USB Drivers Installation) make sure you have install the drivers correctly.
download the original ROM.
dropbox.com/s/8kv93irrp8o8cpm/one%20english.rar
2.
Unplug the phone. open the folder named "SP_Flash_Tool" from the MT6577_root_tools_pack.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
Then click "Format"
Format -> Automatic format flash -> Format whole flash except bootloader -> OK
then connect the switch offed phone. (it will automatically format the phone.)
After its done disconnect the phone.
close the SP_flash_tool.
3.
Unplug the phone. open the folder named "SP_Flash_Tool" from the first download.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
then click " Firmware upgrade"
then connect the switch offed phone. (it will automatically upload the files to phone.)
it will take few minutes. then unplug the phone.
now try to switch on!
hope it will work for you.
good luck
:good:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
boulabloubla said:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
Click to expand...
Click to collapse
can you use your phone now?
Hello everyone, I have a problem with a htc one of my friend. the phone has no operating system, no longer appears when you turn on anything. how can I do to flash boot, recovery, and all the rest?
the phone will not turn off, you have to wait for it drains the battery.
I apologize for my English
thanks
Bricked HTC one clone MT6589
Hello everybody!
I have the same issue my HTC One clone MT6489 does not work since I flashed the boot image (I know...).
I have followed all the steps mentionned above and my screen stays back when I reboot.
Maybe I misse sonething.
Anybody can help?
D.
Reboot loop
To be more precise, any boot image or wahtever I put, I have a reboot loop...
sir i have a hard time following the concern , after choosing the scatter "MT6589_Android_scatter_emmc.txt" then try to press the download button it seems download not starting. can you help me with this sir?
after of a purple loading its stock from 0% loading, and no yellow loading.
Hey guys, I've ran into a problem here maybe you guys can help me out. An update for my phone came today I downloaded it. After I installed it the device tried to restart as it should. But the phone wasn't able to boot. There was a USB logo on the screen which just came for a fraction of a second and the phone just powered off again. I was able to open Droidboot I tried recovery, factory reset but after I selected any option the phone had to restart and the USB logo came as I mentioned before. My device is rooted and it's running Android 4.4.2 KitKat. Any help would be greatly appreciated . Please help me. :crying:
CAL1BER said:
Hey guys, I've ran into a problem here maybe you guys can help me out. An update for my phone came today I downloaded it. After I installed it the device tried to restart as it should. But the phone wasn't able to boot. There was a USB logo on the screen which just came for a fraction of a second and the phone just powered off again. I was able to open Droidboot I tried recovery, factory reset but after I selected any option the phone had to restart and the USB logo came as I mentioned before. My device is rooted and it's running Android 4.4.2 KitKat. Any help would be greatly appreciated . Please help me. :crying:
Click to expand...
Click to collapse
try waiting for atleast 10 minutes coz first boot of new softwares takes a little time
else you can contact to manufacturer
hi buddy, can you help me? if you can please answer on comment field. I have a mobile phone brand Lenovo A6010. my phone is totally dead and can not turn on. nothing on the screen. no recovery, no fastboot, no logo. but when I connect my phone to my pc, my phone is read as fastboot. i tried using lenovo downloader. but when I open the program my phone is not listed on the window. Please help me:crying::crying::crying:! Thank you for your attention.