Database Info

Bluetooth 2.0 - anyone?

I'm after an upgrade for BT. My headphones need 2.0w/EDR + A2DP.
Can anyone help.
Thanks

try this...
run both files

Didn't work
This install is to enable the A2DP feature for BT, not to upgrade the BT stack.
Thanks anyway.
Can anyone else help??

I am not sure I can help, but I am curious what headphones you got that will only use 2.0?

The headphones are Logitech FreePulse Wireless
Link to headphones are:
http://www.logitech.com/index.cfm/products/details/GB/EN,CRID=2412,CONTENTID=12492
They're pretty good. This pair is a replacement, from Logitech, for 2 pairs of the old iPod headphones. They were replaced due to the cracking headband problem. Unfortunately the new pair does not operate the remote control functions (on the iPod or the phone). They just have volume and mute controls on the headphones.
These new ones connect to the phone OK, but I'm not able to set the device as 'set as Wireless Stereo' and there are no service listed. I'm guessing it the phones version of BT that's stopping the connectivity problem.
What's your interest BT or the headphones?
Cheers.

I am interested in finding the ideal a2dp headphones (decent sound, comfortable, no distortion/skipping, controls work right). I've tried several with my qtek 8300 (moto ht820, sony hbhds970, nextlink spider), and each seems to have its own problems. I've settled on the Sony set, but it has issues with switching from handsfree to wireless stereo (won't automatically switch back to wireless stereo after phone call). I haven't tried any logitech set yet, though.

Hello,
I have downloaded the zip file but seems to be corrupted. Can you upload it again. Many Thanks.

alxcln,
alxcln said:
Hello,
I have downloaded the zip file but seems to be corrupted. Can you upload it again. Many Thanks.
Click to expand...
Click to collapse
I can download it OK.
If it's still a problem, get it from here:
http://forum.xda-developers.com/showthread.php?t=280374

SONY Bluetooth Stereo Problems. Help please

I have recently purchase a SONY DR-BT20NX stereo wireless headset that is SUPPOSED to work as a hands free head set too. It's not behaving and wondered the following:
Does anyone run one of these and can advise?
Are there know problems with BT Stereo headsets on the Trinity that require tweeks?
It seems to be OK when playing music but when set as a hands free unit the phone will not ring, it will only sound in the earphones. It will not respond to an INCOMMING call only an outgoing one. NONE of the advance functions work when making or taking a call so I have to use the buttons on the PDA!
When used as a stereo headset it does seem to stop start and pause music ok from the button on the headset, and even skip to the next track. But as mentioned, NO functions work from the button on the BT headset when a using the phone, let alone the advance functions the thing is supposed to offer.
This is the second unit I've tried as I returned the first one to the supplier as I thought it was faulty as it was do too many stupid things.
Thoughts chaps...?

Sorry not much help with your specific model but I can report that the Trinity works well with the SonyEricsson HBH-DS970 both for audio and to manage phone calls. All buttons work properly.
Are you sure your model supports the Handsfree BT profile? I thought all phones and phone accessories were part of the SonyEricsson joint venture portfolio and Sony would not produce phone accessories under its own brand.

Read this, Sony BT20NX worked seamlessly (both A2DP and AVRCP) on Wizard :
http://forum.xda-developers.com/showthread.php?t=299954
@Anonimo
I did think the same way you are, until i see it myself on a store shelves... I really don't understand why either...
Anyway both DS970 and BT20NX have necklace design... or you may called it "gene"

MIZZO1628 said:
I have recently purchase a SONY DR-BT20NX stereo wireless headset that is SUPPOSED to work as a hands free head set too. It's not behaving and wondered the following:
*Sniped* ...
Thoughts chaps...?
Click to expand...
Click to collapse
I tried this in one of the stores and found that it was NOT working properly with my Trinity (WM6 Rom). It was skipping horribly. Gave up after 5mins of trying. The square design of the center piece makes it looks like it came from the 90s.
Anyway, I tried the http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050 I-Clip Radio and it worked out of the box (Flawlessly). Even the Cyberion Voice commander (for handsfree dialing through wireless bluetooth) works beautifully. Bought it after 10mins of trying, used it for 5 days now ... no regrets! It comes with a 3.5mm audio socket so you can pair it to your favourite Sony EX headphone or the over priced Shure headphone. Sound quality is unbelievable. Try it ...

Just wondering if MIZZO1628 eventually got Trinity working with the Sony DR-BT20NX earphones? I really like the look of these, and am willing to do some reg hacking if necessary - but not if its going to be a dead end...

I also have the Sony BT headphones, and they have always been a problem with every rom (HTC Wizard included) that I have used.
I nearly always must edit the registry to listen to music, and the phone call function only works for outgoing calls.
I should have known better than to buy something with 'Sony' on it, but there was a recommendation elsewhere in this forum.

Telephone cant find bluetooth-headset!

Hi! I have a brand new Jabra 620s bluetooth-headset. When I turn the headset on and search for bluetooth devices on my computer I can see it, but I cant see it when I search for it on my touch pro.
What could be the problem here?

I had a similar problem last night (and have it quite often when i need to pair). It doesn't detect it until the 3rd or 4th time in which last night it didn't even detect it either. I power cycled the headset and my phone found it the first time.

Yeah, I tried rebooting my headset and my phone several times, but I still can't get it to work...

Figured it out... Had to hold in a button on the headsett to make it avaliable for new devices...
But new problem:
I don't get sound in the headsett when I play music. But when I make a call the sound is in the headsett. What could be the problem here?

Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.

nyckid211 said:
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
Click to expand...
Click to collapse
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?

slogum said:
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
Click to expand...
Click to collapse
You can use Advanced Config to enlarge the bluetooth bitpool under the bluetooth tweaks. Set it to "very high" for best sound quality (uses more system resources tough).
HTH

Maximum bit-pool setting is 1561. I dont think it solves the problem, cause the quality is still really bad.

Any other tips? Or do I have to return the headset cause a brand new ~1000$ phone cant play on a wireless bluetooth headset?!

Bump.. Are there really no solutions?

Howto AutoUse BT Pair for Media Audio?

I've touched on this question before but I may have been using some wrong terminology.
On my S3 I have successfully created a BT pairing with a BT Audio Device use which has a steroe out fed into my car's head unit's Aux In.
So, it is Auto-Paired. That is, when I step into my car and turn on the ignition thus powering up the BT Audio Device the paring is available to be used for Media Audio.
However, in order for my phone to route audio to the BT Audio Device I must enter the phone's BT menu and tell the phone to connect to the Device for Media Audio.
I can either do this through the notification pane to see pairings then tap the pairing to use for Media Audio or I can go through settings->BT and do the same thing.
Either way, it's a huge PITA to do this every single time I get into my car.
There has got to be a way to have the phone automatically route Media Audio through this BT Audio Device upon detection. My previous two phones had nowhere near the ability of my S3 but they had no issues whatsoever with automatically pairing and routing audio to this BT Audio Device.
Is the S3 really this stunted in the BT department? If so, is there an app that fixes this stupidity with grace and non-intrusiveness?

crabapples said:
I've touched on this question before but I may have been using some wrong terminology.
On my S3 I have successfully created a BT pairing with a BT Audio Device use which has a steroe out fed into my car's head unit's Aux In.
So, it is Auto-Paired. That is, when I step into my car and turn on the ignition thus powering up the BT Audio Device the paring is available to be used for Media Audio.
However, in order for my phone to route audio to the BT Audio Device I must enter the phone's BT menu and tell the phone to connect to the Device for Media Audio.
I can either do this through the notification pane to see pairings then tap the pairing to use for Media Audio or I can go through settings->BT and do the same thing.
Either way, it's a huge PITA to do this every single time I get into my car.
There has got to be a way to have the phone automatically route Media Audio through this BT Audio Device upon detection. My previous two phones had nowhere near the ability of my S3 but they had no issues whatsoever with automatically pairing and routing audio to this BT Audio Device.
Is the S3 really this stunted in the BT department? If so, is there an app that fixes this stupidity with grace and non-intrusiveness?
Click to expand...
Click to collapse
I feel ya, in the past, all I had to do was toggle BT on and go, now there's two or three extra steps which almost defeats the use of a toggle.
I just started searching for some answers and am honestly surprised no one else has made a big deal about this. If I find something, I'll post it up... For now, going to take a look at some system files and build.prop stuff, but it's not really my department.

Got some NFC tags and NFC Task Launcher hoping I could circumvent the BS with a hardware hack. But no, the best this does is auto toggle the BT radio and open the device selection screen where 2 more taps are required to actually use the device for media audio. Any new insight out there? Considering Tasker app but it is rather expensive and no free version to see if it does the trick.

My Bluetooth Auto Corrects Just fine to my cars Bluetooth... Toggle on and go. Running AOKP currently but it worked properly on stock, stock rooted, and Synergy as well.

I haven't gotten a chance to try this yet but I probably will tomorrow.
Tasker forum post indicating the problem is well known, prevalent and hardly any fixes exist:
https://groups.google.com/forum/?fromgroups=#!searchin/tasker/bluetooth$20audio/tasker/TLsjT9Exle8/ZLlgvEn5vUUJ
An app that forces the connection amongst other things:
https://play.google.com/store/apps/details?id=a2dp.Vol
A Tasker plugin leveraging the force connect code which happens to be GPL'd in case any of our fine developers would like to start making ROMs that address this major drawback of using a S3:
http://code.google.com/p/a2dp-connect/

crabapples said:
I haven't gotten a chance to try this yet but I probably will tomorrow.
Tasker forum post indicating the problem is well known, prevalent and hardly any fixes exist:
https://groups.google.com/forum/?fromgroups=#!searchin/tasker/bluetooth$20audio/tasker/TLsjT9Exle8/ZLlgvEn5vUUJ
An app that forces the connection amongst other things:
https://play.google.com/store/apps/details?id=a2dp.Vol
A Tasker plugin leveraging the force connect code which happens to be GPL'd in case any of our fine developers would like to start making ROMs that address this major drawback of using a S3:
http://code.google.com/p/a2dp-connect/
Click to expand...
Click to collapse
I haven't had any trouble with bluetooth devices reconnecting to my phone as soon as I power them on. I'm running cyanogenmod 10 rom.
Also you can get free trial of tasker from here tasker.dinglisch.net/download.html

zxsix said:
I haven't had any trouble with bluetooth devices reconnecting to my phone as soon as I power them on. I'm running cyanogenmod 10 rom.
Click to expand...
Click to collapse
It seems the issue may be primarily with BT Audio Gateways. I don't have this issue with my laptop at all and I'm imagining car head units rarely see this problem.
That said A2DP Volume App fixed this issue for me. Once configured I did have to manually set the device to use media audio one last time before A2DP Volume started doing it for me. I configured NFC Task Launcher to kill wifi, enable BT and launch A2DP volume when it contacts the tag in my car and it works perfectly. Since NFC Task Launcher front ends into Tasker and Tasker has the A2DP force connect plugin available I'm seriously considering getting Tasker for all the other cool features it can do besides scratching this particular itch.

crabapples said:
I've touched on this question before but I may have been using some wrong terminology.
On my S3 I have successfully created a BT pairing with a BT Audio Device use which has a steroe out fed into my car's head unit's Aux In.
So, it is Auto-Paired. That is, when I step into my car and turn on the ignition thus powering up the BT Audio Device the paring is available to be used for Media Audio.
However, in order for my phone to route audio to the BT Audio Device I must enter the phone's BT menu and tell the phone to connect to the Device for Media Audio.
I can either do this through the notification pane to see pairings then tap the pairing to use for Media Audio or I can go through settings->BT and do the same thing.
Either way, it's a huge PITA to do this every single time I get into my car.
There has got to be a way to have the phone automatically route Media Audio through this BT Audio Device upon detection. My previous two phones had nowhere near the ability of my S3 but they had no issues whatsoever with automatically pairing and routing audio to this BT Audio Device.
Is the S3 really this stunted in the BT department? If so, is there an app that fixes this stupidity with grace and non-intrusiveness?
Click to expand...
Click to collapse
You can fix this relatively easy by getting the app Tasker. I use it to do things like automatically start the music player I want when headphones are plugged in, to turning up the brightness automatically when I am getting an incoming call, etc. I am fairly certain you could set up the program to do whatever you want via bluetooth if you fiddle with it.
Gluck!

mdt73 said:
You can fix this relatively easy by getting the app Tasker. I use it to do things like automatically start the music player I want when headphones are plugged in, to turning up the brightness automatically when I am getting an incoming call, etc. I am fairly certain you could set up the program to do whatever you want via bluetooth if you fiddle with it.
Gluck!
Click to expand...
Click to collapse
LOL, if you had only read the rest of the thread...
Yeah, Tasker cannot do this OTB but with the A2DP Connect Plugin it can. Or you can just run the A2DP Volume app and do the same for free.
That the A2DP Connect code is GPL it would be super sweet if our developers incorporated the magic into the ROMs so that a base install didn't need apps to do something so simple as automatically route media audio to BT gateways.

This happens to me when I use the wrong settings in my cars head unit. My Toyota gives me the option to pair as a multimedia device, a phone or both. If you set it up as just a multimedia device then you won't have some functionality. Check your head unit manual and try to re-pair. You might have to delete the existing pairing for it to work right.

rfmodeler said:
This happens to me when I use the wrong settings in my cars head unit. My Toyota gives me the option to pair as a multimedia device, a phone or both. If you set it up as just a multimedia device then you won't have some functionality. Check your head unit manual and try to re-pair. You might have to delete the existing pairing for it to work right.
Click to expand...
Click to collapse
Yeah, it's not a head unit, it's an audio gateway that basically is just a BT receiver with a stereo out and no interface so it is what it is with no configuration options. This issue with the S3 appears to be primarily related to these types of devices.

crabapples said:
Yeah, it's not a head unit, it's an audio gateway that basically is just a BT receiver with a stereo out and no interface so it is what it is with no configuration options. This issue with the S3 appears to be primarily related to these types of devices.
Click to expand...
Click to collapse
Oh okay. When I look under the bluetooth menu in CM10 I have a paired connection that I named Car Multi-Media and if I look at its settings I see profiles called Phone audio and Media audio. I'm guessing you just have a Media audio profile. Not sure how to help you there. Sorry.

One click - Connect 2 Specific Bluetooth device for A2DP and Phone app

An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!

Would you mind sharing a code snippet on how you achieve this? I've been working on a little program that I intend to use around the house and this is the missing piece that I can't figure out. Basically, I have some NFC tags spread around the house and a receiver app that triggers various actions. One of them enables bluetooth on my device (if off), turns on my home audio receiver (over telnet), connects to the receiver's A2DP device (this is the missing piece), and launches a music app.
I've seen examples where this works using an AIDL method, but from what I've gathered this no longer works under Android 4.2. Does your app work on 4.2? Any hints you can provide?
Thanks!
Brian

I'm not the writer of this app.
You could try contacting them via the email listed on Google Play.
BTW, while you're making your app, please dedicate a thread to it on XDA so we can all beta test and buy it later!

klau1 said:
I'm not the writer of this app.
You could try contacting them via the email listed on Google Play.
BTW, while you're making your app, please dedicate a thread to it on XDA so we can all beta test and buy it later!
Click to expand...
Click to collapse
Oh, OK. I just assumed this was your app.
After reading the Play Store description more carefully, I don't think this app actually does what I'm trying to do (programmatically establish an A2DP connection). It appears this app enables / disables certain profiles but the actual connection is still handled by the OS.
As far as the app I'm making, I was intending it to just be something for personal use. I'm planning on keeping it very lightweight and tailored specifically to my needs. For it to be used by anyone else they would have to have the same brand of A/V receiver as me (Pioneer) that supports the same telnet commands. Most of the rest of the functionality of the app can be duplicated by using some of the existing NFC apps like NFC Task Launcher. If I ever develop it into something interesting that could be used by a wider audience I probably will post it on XDA for feedback though.