So, I know many of you out there have been looking for a mount for your car, and many of us know how good the iOttie series of Easy One Touch mounts are. The Easy One Touch 2 does work with the 6P, sometimes, but often will press on the buttons on the side or not hold the phone well because of the side arms.
I just bought and received the new iOttie Easy One Touch 3 and can say it works perfectly with the 6p, in or out of a case. I'll get some pictures up tonight, but here's a link and what's new.
http://www.amazon.com/iOttie-Holder-iPhone-Samsung-Galaxy/dp/B0197549HS/
Pros
+Arms are built better and hold phone perfectly
+Spring seems stronger
+2 Base feet now
+Base feet are adjustable up and down so you can change the height so the buttons aren't pressed by the arms
+Easier to use control knobs
+Much bigger activation button
+Looks way nicer
Cons
-This may just be for me, but the arm is now an inch or bit more shorter. This may not affect others, but for me I need that extra inch (ba dum dum) so it is closer to my finger when fully extended (bazinga)
I'll get some pics up tonight, if you have questions, shoot them my way.
Oh, I'll probably swap the base back to the Easy One Touch 2 so it is long enough (phrasing!) as they use the same size pivot balls (tada!).
I'll get some
Here's a few pics installed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'll go take a few with my g3 of the 6P in place.
How is it with the volume buttons where the mount looks to hit?
I have some more pictures on my g3 that all post here in a few but like I was saying the feet are completely adjustable up down left and right. I've been able to adjust it so it completely clears the buttons with some slack in there for even thinner cases.
Now I just need a car....
Related
2 Questions
Would a big magnet stick to the bottom of the i-mate 7150?
Would a magnet sticking to this cause any progrems for the pocket pc?
I have an idea for my car but first need to find out if this would be okay...
The HTC Athena has a large magnet in it (and a hard drive) but it works well with no ill effects, the largest problem with a powerfull magnet is when you put the PDA in your pocket, it can wipe out the magnetic strips on credit/ bank cards etc - I have a number of swipe cards that no longer work since getting my Athena!!! - Mike
hmm alright.. i have an idea that i was thinking about..
For any of you not familiar with the Acura Integra, on the dash board, it has a decling indent to show the clock..
now i was wondering.. i would like to but a large magnet under the dashboard before the clock so then i could open up the i-mate 7150 and place in the indentation and not have it sliding around and be held firmly.. i know this may be kind of confusing but for anyone who understand do you see any reason why this cant be done?
here is a picture of the dash board
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No reason you couldn't try it - one word of caution though if the car is equipped with air bags take care when working behind the dash - set one off and it would probably put you in hospital.
Check out Brodit for a holder and Pro Clip for the device though, they offer a profersional and safe mount for most devices and cars - a magnet probably won't hold the device in the event of an impact, a heavy phone/ PDA flying around the cabin could cause serious injury - Mike
Ever think of trying something like this?
http://cgi.ebay.com/Clear-Sticky-Ma...ryZ35193QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Target/KMart stores sell smaller versions that would prabally be better.
BTW... i always thought magnets mess with the landscape function in the phone..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It simply fits.
Not bad but I cannot stand the hole in the left hand corner!
mingkee said:
It simply fits.
Click to expand...
Click to collapse
We call this style the DiamondFlex at TPU-Cases, others simply call it the Diamond Pattern. This look amazing on the phone. We didnt make this style for the G2x, but have made them for numerous other phones. I've never seen a TPU case designed like the one you posted, I'm surprised its able to hold its shape with such a large cutout in the corner. I personally would of done 2 holes in that corner instead of 1. Although we ended up just using 1 hole for the power button since only the Korean model has that corner port anyways.
OneStepAhead said:
We call this style the DiamondFlex at TPU-Cases, others simply call it the Diamond Pattern. This look amazing on the phone. We didnt make this style for the G2x, but have made them for numerous other phones. I've never seen a TPU case designed like the one you posted, I'm surprised its able to hold its shape with such a large cutout in the corner. I personally would of done 2 holes in that corner instead of 1. Although we ended up just using 1 hole for the power button since only the Korean model has that corner port anyways.
Click to expand...
Click to collapse
Yes, this hex pattern looks pretty good. This is a reason why I went for this. Moreover, it simply fits 100%. It's pretty easy to put on but it's not loose at all.
I can live with this "TV antenna" cutout though.
Wondering how this compares: http://www.amazon.com/gp/product/B0050ISVW6/ref=ox_sc_act_title_2?ie=UTF8&m=A2HOCXU5SC35JO Obviously this one is solid black, and it doesn't appear to have an antenna cutout.
I just ordered one anyway, hopefully it will work for me.
Hi all!
I just wanted to kick off this Friday with a little treat of sorts. I have just purchased the latest landscape version of the dock where I had previously have gotten my portrait one (which I love btw) here; http://forum.xda-developers.com/showthread.php?t=1181292 .
Anyway, because craigsdocks.com has been a great store/guy to buy from, I had to try out this version as well. And I must say this landscape is really pretty nice. But for my personal preference and lack of desk space, I think I may stick with the portrait one...maybe not lol....
With the landscape model, this dock can easily be used with other phones like the Thunderbolt and Incredible, and Incredible 2. And the best part of these docks, you can use literally ANY case you want with this dock, granted it's not a HUGE case lol....
Any negatives? Hmmm... well I did have a bit of a battle with the tape and making sure that the micro usb port wasn't too far up. Other than that it's just a space issue that can be easily worked on with the supplied allen wrench.
On the dock itself, you can see the dock is lined with a soft felt padding and the dock is made of aluminum there's a little recessed space for volume buttons as well. The bottom is lined with rubber so that it won't be sliding off of a smooth surface. This guy thought of everything! Including the little notches to run your cord whichever way works best for your phone. Pretty nifty IMO.
Like the portrait version, this has a great weight to it and because of the rubber grip, this sucker isn't going to slide off very easily.
As for triggering clock mode or dock mode, I made a short vid on youtube to illustrate how to do it with a great program called llama location profile. Once you set this up, dock/clock or whatever mode can be made to come up. BE NICE I just put this together at work lol....
But please ask any questions you may have on the dock and/or the program.
Have fun people!
Vid showing how to get use Llama profiles
http://youtu.be/MjFHlX9_LKQ
And here's a vid from craigsdocks.com's site:
http://www.youtube.com/watch?v=w5ZRI9W3YJY&feature=player_embedded
Now here are the pics for your enjoyment
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am working on a wallmount for my TF700 atm, so once entering the door to my apartment i can grab and operate my house automation software with it.
Basically the 3D modell is done in Google Sketchup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sliced the modell into a back-, mid- and frontplate, and exported it into a dwg-file which you can find in the zip attachment.
View attachment 1652239
I will use my local carpenter to provide me with the plates and work my way forward from this point. Please be advised i have not had time to cut the plates yet since i am quite busy irl atm.
Some work i still need to finish:
- thin rubberband between the tablet and wood, for easy safe sliding into the wallmount
- charging hole @ the bottom
- the mount system itself, hopefully removeable mayby integrate a kickstand so i can even place it on a table
Questions:
Is there a pin layout for the bottom charging plug, i heared it should also support audio out for external speakers there or can this only be achived by the headphone interface at the side of the tablet?
well done. looks nice
I would also recommend to cut-out a small piece in the top-middle of the back-plate. This will probably allow you to more easily grasp at the device.
Rubber does not make a good slide. I would suggest putting a layer of smooth fabric over the rubber to smoothen it.
Silk or Lycra (Lycra is cheaper) should work. Lycra has a better heat regulation than regular cotton, but normal cotton could work too if you're low on budget.
How will you be attaching it to the wall?
I like this idea!
What sort of home automation do you use? Something similar to Brighthouse Networks?
I find that a heavy duty felt works very well as a smooth barrier between two objects. Mostly, I've used it to keep my wood furniture from scratching the new floors, but the same principle applies obviously with glass & wood. It provides a good deal of padding beyond just the low friction surface, and it's also super cheap to boot.
Hi all,
I was looking for a replacement Spen for my Note 8 but couldn't find any good (mostly the offset was unacceptable). Then I found a video where some guy (I can't find the video right now. If you know it please post a link and I will add it here) had a great idea of putting Note's 3 Spen inside old ordinary Uniball pen. With that in mind I bought Note's 3 Spen and found few old pens laying around in my office.
Three hours of work and this is what I got:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I used:
1 x Old BIC pen
1 x PCB push button
1 x Note 3 Spen
some isolation tape
some paper
some plastic part that I used as a distance inside the pen (Spen was shorter than BIC pen)
Things to keep in mind:
Be careful for your stylus! Mine got stuck twice and getting it out was pretty tricky.
Use your tools wisely. You don't want to brake the Spen or cut/puncture your own hand!
I was successful doing this homemade "spen holder" but I am not responsible for any damage or problems that may arise when you try to do something similar. Always use your brain and be sure you have enough knowledge before you start to work.
I thought one might use this idea if you need accurate and nice stylus in "full" size.
PS
One can of course close the pen and then it looks just like ordinary one. The blue tape is just for my information that this one is actually Spen as I am using identical pen for normal paper writing and drawing
Impressive work, love DIY projects
Nice project and very good idea, i will defiantly try something similar because i got used to write a lot on my note 8.0 and spen is not that comfortable for longer usage.
why cant i think of this... good idea my friend... going to get one... hahaha... kind of tired writing with the current spen... going to use the old note 1 spen to try modding the pen...
what's the PCB button for? to activate the s-pen button?