My phone is LG optimum V2 but on its back there is f200s,L both its a korian phone and now its in pakistan .
XDA Visitor said:
My phone is LG optimum V2 but on its back there is f200s,L both its a korian phone and now its in pakistan .
Click to expand...
Click to collapse
Hello, and welcome to XDA!
There should be an option to disable wifi scanning when wifi is off. Since I don't have that phone, I cannot confirm it's existence nor share where it can be found (Settings somewhere).
Your device community should help. They can be found in this thread:
> Android Development and Hacking > Android General > LG Optimus VU 2 ( F200S / F200K / F200 L) - discussion, root, recovery, ROMs
Please note, you will need to have an XDA account to post there.
Hope this helps, and good luck!
Related
I have ptcl evotab with android ics 4.0.4.
There was hang issue, so I downloaded firmware update from here (ptcl . com . pk / Home/ PageDetail?ItemId=209&linkId=319).
I updated it from recovery mode. It hung during update and now it do noting after the ptcl logo. I cannot do anything now. Please help me.
Tell me how to fix it or how can i install android or windows8 in it?
Please help
XDA Visitor said:
I have ptcl evotab with android ics 4.0.4.
There was hang issue, so I downloaded firmware update from here (ptcl . com . pk / Home/ PageDetail?ItemId=209&linkId=319).
I updated it from recovery mode. It hung during update and now it do noting after the ptcl logo. I cannot do anything now. Please help me.
Tell me how to fix it or how can i install android or windows8 in it?
Please help
Click to expand...
Click to collapse
Ok, there is not much about your device on xda.
But I found this thread: Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] PTCL evo tab.
Maybe you can ask there, if one of the experience users with your device can help.
Good luck !
Thread closed and thank you.
I got a moto XT1023 mono-sim that was purchased in Boston (and frankly I forgot to see what was the original firmware)
So I installed the CM11, but did not work for me because the headset did not work ..
installed again the stock rom, and none of what I tried did the phone signal work, I could upgrade to 4.4.4, but the phone signal did not work.
Until I found the ROM RETUAWS_XT1023_4.4.2_KXC20.82-15_cid9_CFC.xml.zip
(http://bit.ly/1pGmrKp)
And to re-install it, i needed to reset the phone again
And it worked, I went back to have phone sign, worked headphones!
But I cannot upgrade to 4.4.4 and consequently will not update for android 5.
Any help?
I noticed that all rom i've tested and the phone signal didn't work are _cid14_
the rom it worked on my phone, is _cid9_
this link: http://bit.ly/1pGmrKp
There is a 4.4.4 version, does anyone know if you can work?
Because I got tired of resetting the phone and having to install all the apps again, so with unroot the phone to install improvements in battery .
If i just flash the recovery 4.4.4 i can solve it?
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Guys Help!!!
My Phone isn't booting up !!!
Device : Micromax A300 GOLD
I was actually trying to update my phone's firmware using SP Flash Tool but unfortunately It failed to do so...
and I think now my whole phone is now formatted and seems like everything has gone empty out here, now the device isn't showing up anything
What should I do now???
Hi,
Here is a dedicated thread for your device, Asking for help here is best. Read the first post carefully too,
> Android Development and Hacking > Android General > Micromax Canvas Gold A300
Good luck!
Darth said:
Hi,
Here is a dedicated thread for your device, Asking for help here is best. Read the first post carefully too,
> Android Development and Hacking > Android General > Micromax Canvas Gold A300
Good luck!
Click to expand...
Click to collapse
That's okay but the thing is nothing's showing up on my device the screen's just black nothing happens even if I press/hold the power button to turn it ON...
I need to somehow flash my phone back to Stock ROM to turn it ON
I've even tried to search for solutions on the internet but didn't get any appropriate results
but a very few of them mentioned something about flashing back to Stock ROM using a software named Odin, Haven't heard of it before So I need to check that out!!!
-But the thing is I don't know how to use it
So do you guys have any idea if its gonna work or not???
Ask about in that thread. Try a different cable and charger... Let it charge a very long time. If there's no sign of life at all.... You may need to go to a service center.
Well, i soft bricked my LG G Stylo and then i manage to remove super user from my phone but i still can't get into download mode and the phone is still stuck on the activation phase, so if anyone can help me PLEASE AND THANK YOU and MAY GOD FOREVER BLESS YOUR SOUL
XDA Visitor said:
Well, i soft bricked my LG G Stylo and then i manage to remove super user from my phone but i still can't get into download mode and the phone is still stuck on the activation phase, so if anyone can help me PLEASE AND THANK YOU and MAY GOD FOREVER BLESS YOUR SOUL
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Well, I just read the stuff in red from the first post:
> Android Development and Hacking > Miscellaneous Android Development > LG G Stylo (Boost Mobile) [UPDATED July 27]
This may be your situation, if so, things don';t look that good. Read that thread, looks like there are some ideas there (I noticed one on the last page).
Feel free to post there as well, once you have registered for an XDA account.
Hope this helps, and good luck!
I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Olayiwola said:
I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Click to expand...
Click to collapse
Hi Olayiwola
Thank you for using XDA Assist
The device you are mentioning apparently is one of the: Mediatek MTK6592; or THL MTK6592; or Jyaiu MTK6592.
As we do not have an specific forum dedicated to your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.