Database Info

Canadian Note 3 (N900W8) Knox Thread (0x0 can be maintained)

There are users here in Canada with Note 3's that have "Custom" in "Current Bianary" and "System Status".
This information has not been posted, I have NO idea why. I am guessing these people could care less about us (the people still in the dark).
I have only just obtained a Note 3 (Week ago) and I am trying to figure this stuff out.
We have a special Note 3 in our N900W8's. Apparently we can:
- Downgrade from 4.4.2 to 4.3 via Odin 3.09 without tripping Knox (not sure if this requires the Mexican bootloader first or if we can do it with our Canadian bootloaders)
- Keep Knox at 0x0 with Custom Everything else. From what I see, our bootloaders are unlocked allowing us to flash our phones in Odin with multiple files (not 1 file mode as this contains a bootloader) as long as we dont include the bootloader (theory from what I have seen, and read a few times, no confirmation).
However I can not get an answer out of anyone who knows anything. I cannot just blindly flash and see if Knox is tripped, I'll only get one shot. Not worth it IMO.
Can anyone chime in on this? Is it acceptable to call members out? I know exactly who the 2 people are that have Custom everything and Knox at 0x0. 2 Torontonians, younger guys, doesn't seem like they want to talk though. Can I call them in here, is that acceptable behavior? Never done that before. Hehe.

I can confirm. I used this method:
http://forum.xda-developers.com/showthread.php?t=2614772
I have a Rogers Note 3 with CWM installed and rooted with Knox at 0x0. My friend just updated his Note 3 to kit Kat (through kies) and rooted using cf-autoroot and his knox is 0x0. I haven't tried downgrading so I cannot comment on that.
I am planning to flash the official Rogers rom shortly and then root (not sure about installing a custom recovery yet) I will report back when completed.

I PM'd you but yeah, I'm Knox 0x0 on X-Note 12 right now. Sorry about that, wasn't home.

kiru said:
I can confirm. I used this method:
http://forum.xda-developers.com/showthread.php?t=2614772
I have a Rogers Note 3 with CWM installed and rooted with Knox at 0x0. My friend just updated his Note 3 to kit Kat (through kies) and rooted using cf-autoroot and his knox is 0x0. I haven't tried downgrading so I cannot comment on that.
I am planning to flash the official Rogers rom shortly and then root (not sure about installing a custom recovery yet) I will report back when completed.
Click to expand...
Click to collapse
That link notes that installing a custom recovery will trip knox. Could you please verify what you did to install custom recovery and still maintain knox 0x0? Will be very interested in your follow-up.

kiru said:
I can confirm. I used this method:
http://forum.xda-developers.com/showthread.php?t=2614772
I have a Rogers Note 3 with CWM installed and rooted with Knox at 0x0. My friend just updated his Note 3 to kit Kat (through kies) and rooted using cf-autoroot and his knox is 0x0. I haven't tried downgrading so I cannot comment on that.
I am planning to flash the official Rogers rom shortly and then root (not sure about installing a custom recovery yet) I will report back when completed.
Click to expand...
Click to collapse
Could you also PM me the procedure? Knox is really bugging me and TW is bloated with too many craps. X-Note looks awesome! Thanks !

bingbinghaha said:
Could you also PM me the procedure? Knox is really bugging me and TW is bloated with too many craps. X-Note looks awesome! Thanks !
Click to expand...
Click to collapse
Actually, I would be interested too. Any chance of posting the procedue instead of PM to multiple users? If not, please PM me as well

I followed the guide in the link I posted as it is pretty detailed already. I have root and cwm recovery installed with Knox at 0x0.

kiru said:
I followed the guide in the link I posted as it is pretty detailed already. I have root and cwm recovery installed with Knox at 0x0.
Click to expand...
Click to collapse
Second that.
---------- Post added at 12:55 AM ---------- Previous post was at 12:38 AM ----------
Okay here. https://www.youtube.com/watch?v=Tks73wZH3qg&list=UU2FLZg9YNAr4YAd0VEDDKGQ
You have to pause to see it at the beginning, and in hindsight, I probably have should of started in CWM, then booted into recovery, but whatever.
Set it to HD and pause it at the beginning, you can see my Knox 0x0. Then watch the video and I boot into the ROM, then back into CWM, all in one cut.
Cheers.

Same here
Knox 0x0 here, after a few good reasons to trip it
Android newcomer here.
I have a Bell Canada SM-N900W8, and it came with 4.3. Rooted 4.3 with Kingo (noob style) and that was just perfect to start out. Then the OTA came out. I unrooted the device, reseted with Kies 3 update to 4.4.2 and then Kingo wasn't working anymore of course.
At that point I decided I didn't care about tripping knox and installed TWRP to start trying roms... Tried like 2-3 1+gb complete packed roms (bootloops, probably cauz im a noob) then I wiped from TWRP, restored my OTA backup, flashed with CF-Auto-Root international version (canadian is another bootloop) and then flashed a CivZ kernel +stock-modification rom that I now simply keep clean with Titanium Backup and some apps y'all know about.
Some more info :
My version is VLUCNB7
My current kernel [email protected]
My current SE state is Permissive
Again, Knox is 0x0. Even after bootloops of custom crap that was crashing and I'm custom-rom, custom-kernel.
Two facts to finish that off
1) That's weird
2) I'm a lucky *****
Have a great day

What if I want to use a custom 4.3 ROM (just to get BT Tethering) without tripping KNOX?
The guides seems to push you to install the 4.4 ROMs.

I have the Bell version of N900W8.
Started at MI5, rooted de la vega, then wanted to upgrade to 4.4.2.
Used polishpats way of upgrading with the leaked 4.4.2, flashed all the AP,CSC,CP,PIT, then installed TWRP and autorooted, both with Odin 3.09 - no knox trip
Wanted to try X-note, installed it using TWRP, and no knox trip
Upgraded the kernel using TWRP, no knox trip
Did not like X-note, wanted to go back to 4.4.2, and reflashed it - no knox trip
Downgraded back to 4.3, no knox trip
upgraded to offical 4.4.2, no knox trip
rooted via chainfire and odin - no knox trip
now sitting at rooted 4.4.2 with 0x0 still

Are you basically saying Bell's N900W8 is KNOX untripable?
I'm on MJ4 (UDLV Rooted) with remaining with MJ1 Bootloader
Since I don't want a KITKAT rom, can I just install a custom recovery (TWRP) without doing all that Mexican instruction stuff?
I really just want a 4.3 ROM with BT Tethering.

klau1 said:
Are you basically saying Bell's N900W8 is KNOX untripable?
I'm on MJ4 (UDLV Rooted) with remaining with MJ1 Bootloader
Since I don't want a KITKAT rom, can I just install a custom recovery (TWRP) without doing all that Mexican instruction stuff?
I really just want a 4.3 ROM with BT Tethering.
Click to expand...
Click to collapse
Hello,
My friend has just the same phone as me, he bought it a few weeks before me, and he used his own techniques and got 0x1 knox tripped, so I just can't warn you enough : not all N900W8 are "untrippable"
...but...I didn't trip mine and I'm not alone.
Without more information you can't just say canadian w8's are untrippable, cauz they are.

Well, are older the better?
I got mine the first week it came out.

klau1 said:
Well, are older the better?
I got mine the first week it came out.
Click to expand...
Click to collapse
I doubt it.
Will look into this. I am positive all N900W8's are the same.
Surely your friend missed something or did something improperly to trip Knox.
Taking this all in. Thanks for the posts guys!

@nexxusty
in your opinion, do you have to go thru installing KITKAT rom from Mexico if you just want to install another 4.3 ROM that has BT Tethering without tripping KNOX?

klau1 said:
@nexxusty
in your opinion, do you have to go thru installing KITKAT rom from Mexico if you just want to install another 4.3 ROM that has BT Tethering without tripping KNOX?
Click to expand...
Click to collapse
Klau you took the question right out of my head brother. LOL.
I am not sure... this also pains me as I want to try CF-auto Root right now on 4.4.2 Rogers.
From my knowledge of technology, I dont think it will. Not positive though. I am hoping you do not need to flash this.
I will test for us. Here is hoping I wont lose my warranty. Will report back.

nexxusty said:
Klau you took the question right out of my head brother. LOL.
I am not sure... this also pains me as I want to try CF-auto Root right now on 4.4.2 Rogers.
From my knowledge of technology, I dont think it will. Not positive though. I am hoping you do not need to flash this.
I will test for us. Here is hoping I wont lose my warranty. Will report back.
Click to expand...
Click to collapse
Flashed CF-Auto-Root, flashed TWRP 2.6.3.0, 0x0 still!
Now for the info on my phone.
I have done as follows.
Phone came with 4.3 stock --> Root De La Vega --> Flashed 4.4.2 Stock (Rogers) with Odin 3.09 --> CF Auto-Root --> TWRP 2.6.3.0 = Rooted 4.4.2 with TWRP 2.6.3.0 Recovery and Knox @ 0x0.
I'm not stopping here. Will flash everything DrawntoLife has.
Appreciated my man. Thanks again! Easy to Follow Step By Step Tutorial **WILL** be written tonight after I am done at a LAN I am already late for figuring this out.
Talk soon everyone! Happy flashing!

did you consider extracting the ODIN package and leave out the Bootloader?
Remember we had to do that upgrading from MJ1 to MJ4. Reportedly, it was the newer bootloaders that trip KNOX.

klau1 said:
did you consider extracting the ODIN package and leave out the Bootloader?
Remember we had to do that upgrading from MJ1 to MJ4. Reportedly, it was the newer bootloaders that trip KNOX.
Click to expand...
Click to collapse
When I updated to 4.4.2? I did, but I was not sure if that would trip Knox so I left it in the package.
It's irrelevant now anyway, the bootloader in 4.4.2 Rogers is the one I am on now and allowing me to do all this still.
I suggest you update to it. Use the package labeled "N900W8VLUCNB7_N900W8OYACNB7_RWC". That is 4.4.2 for a Rogers Note 3.
I can safely assume you can flash this at any point and be fine. Even if you are already on a hacked 4.4.2 or something. There would be no issue updating the bootloader to the same version, would just overwrite it.

My Recent Flashing Experience (Note3 N900W8)

So with trying to help and give back to the community I'm going to post my recent flashing experience.
So here's a little history.. I have a N900W8 from MTS. (Manitoba Telephone System).
Couple months back when the Tel Cel base came out I wanted root so I flashed using the following guide.
-- http://forum.xda-developers.com/showthread.php?t=2614772
This worked out well and the stock rom w/ root was very stable, CWM boot loader..
So now that this new build 'NB7' came out it got me itching to flash again.. LoL
I met all the requirements for 4.4.2 boot loader and such so I decided to flash xnote13 w/ civ snapkat kernel.
This setup worked well.. The rom had a few glitches but was very quick and the best of all I could change the DPI.
I didnt setup the rom 100% as I was feeling it out. After a day or so I decided to flash to stock NB7 and then flash xnote13 again so I can have the updated NB7 modem.
Oh Man.. This is where the fun begins.. So I hit up sammobile and grabbed the latest rogers rom as I noticed all the Canadian roms used the same PDA/CSC/MODEM.
-- http://www.sammobile.com/firmwares/3/?download=26660
PDA: N900W8VLUCNB7
CSC: N900W8OYACNB7
MODEM: N900W8VLUCNB7
I take this rom, flash it on my phone via Odin.. What I notice is the model# and build change to reflect NB7 but the baseband was still MJ4.
I flash 2-3x and still no change.. I'm like wtf..
At this point I'm confused as to why I cannot upgrade this baseband.
I then decided to flash the CSC from the guide I used earlier. As I had a multi-csc installed from when I had flashed Xnote13.
-- http://forum.xda-developers.com/showthread.php?t=2614772
After this I flashed the NB7 rom again via Odin and boom. The baseband reflected NB7.
I noticed my phone had a few Bell apps. When I looked into this I found out its due to the CSC. I tried the method mentioned in most posts *#272*YOURIMEI# but this wouldnt work. I would get instant error messages.
I then found this app on google play which people mentioned having success with.
-- https://play.google.com/store/apps/details?id=com.manniakk.cscselector
I used this app w/ root I was able to bring up a list of the CDN CSC codes. Whats funny is there is no list anywhere on the internet that has what CSC code belongs to which provider.
By going through sammobile and using some good guessing I was able to figure out what most of them are with some exceptions.. I couldnt find MTS...
I ended up choosing MTA and rebooted my phone but sure enough Bell apps were still there.. Tried a few more things and couldnt get past that so I just said forget it.
I decided to keep the Stock NB7 4.4.2 rom w/ root... I frooze all that Bell **** and there's no branding whats so ever.
The rom is working flawless. During this process I rooted the phone multiple times and flashed the NB7 rom multiple times via Odin. At no point did my Knox trip..
As of right now I have CWM as the bootloader and Knox is still 0x0.
Sorry for the long read.. If you have any questions lemme know.
ReDz

Can you help me with rooting my phone? There's too much guides out there for specific models so it confuses me lol. My Note 3's model is the N900W8, running on KitKat 4.4.2, kernal 3.4.0-859721, and the baseband # is N900W8VLUCNB7. I just want to root it so I can remove all the bloatware. I don't plan on adding any ROMs to it unless it's close to looking like stock because I still want the SPEN features without all the fancy stuff

Doodless said:
Can you help me with rooting my phone? There's too much guides out there for specific models so it confuses me lol. My Note 3's model is the N900W8, running on KitKat 4.4.2, kernal 3.4.0-859721, and the baseband # is N900W8VLUCNB7. I just want to root it so I can remove all the bloatware. I don't plan on adding any ROMs to it unless it's close to looking like stock because I still want the SPEN features without all the fancy stuff
Click to expand...
Click to collapse
I've replied to your other thread in Q & A, but if you just want to root, flash this file using odin. It might or it might not trip Knox on your phone. Make sure reactivation lock is off before flashing.

Doodless said:
Can you help me with rooting my phone? There's too much guides out there for specific models so it confuses me lol. My Note 3's model is the N900W8, running on KitKat 4.4.2, kernal 3.4.0-859721, and the baseband # is N900W8VLUCNB7. I just want to root it so I can remove all the bloatware. I don't plan on adding any ROMs to it unless it's close to looking like stock because I still want the SPEN features without all the fancy stuff
Click to expand...
Click to collapse
Do you try with towelroot ?

zelenko said:
Do you try with towelroot ?
Click to expand...
Click to collapse
I already have and it doesn't work

Galaxy S6 5.1.1 root

Hi,my galaxy s6 is on version 5.1.1 with the G920FXXU2BOGG firmware and I want to root it but don't know the right method.I know that there is already a method on how to root galaxy s6 on 5.1.1 but does it support my firmware?because it is made to root the first 5.1.1 firmware or it supports all galaxy s6 5.1.1 firmwares?

hlm19 said:
Hi,my galaxy s6 is on version 5.1.1 with the G920FXXU2BOGG firmware and I want to root it but don't know the right method.I know that there is already a method on how to root galaxy s6 on 5.1.1 but does it support my firmware?because it is made to root the first 5.1.1 firmware or it supports all galaxy s6 5.1.1 firmwares?
Click to expand...
Click to collapse
Only way to get root on 5.1.1 thus far is by flashing TWRP recovery.
If you are an amateur to this sort of thing I would highly suggest not to do that.
It will void your warranty permanently by tripping KNOX which can't be "un-tripped"
May I ask why you think you need/want root?

I want to root my galaxy s6 as I see some good custom roms and want to try them.I've had some android phones before like the galaxy note 4,galaxy note 3,htc one m8 and galaxy nexus and rooted them.Just curious on how to root my gs6 with the XXU2BOGG firmware.Does the 5.1.1 root method supports my firmware?

hlm19 said:
I wan't to root my galaxy s6 as I see some good custom roms and want to try them.I've had some android phones before like the galaxy note 4,galaxy note 3,htc one m8 and galaxy nexus and rooted them.Just curious on how to root my gs6 with the XXU2BOGG firmware.Does the 5.1.1 root method supports my firmware?
Click to expand...
Click to collapse
Okay then, as long as you aware of the risks..
Rooting isn't device dependent, it's just software. It's supported on any firmware as long as you have TWRP installed. It just installs SuperSU for you into the system files.
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
Pretty sure TWRP is supported on all models of S6/Edge, they all share the same hardware as each other.
Just flash it with Odin version 3.10.6.
Grab it here ZeroFLTE represents all S6 models except Sprint model which require their own special one (no idea why)
You then follow the Odin install method, making sure you're using 3.10.6. Otherwise more than likely will not work.
After installation of TWRP and then booting into TWRP you will be faced with the "SuperSU is not installed, would you like to install it?"
.. And done.
Er, actually I think that appears when when you go to restart via TWRP menu
But yeah.. best of luck, don't blame me if your phone explodes into a fire ball that goes nuclear and destroys the world.. Or simply bricks it
Edit: Wait are you talking about the Chainfire root method? If you are you may as well not even consider that if you're planning on custom firmware installs.. TWRP is your best bet because it isn't device/firmware specific like CF. And you need TWRP for firmware installs anyway..

Stevles said:
Okay then, as long as you aware of the risks..
Rooting isn't device dependent, it's just software. It's supported on any firmware as long as you have TWRP installed. It just installs SuperSU for you into the system files.
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
Pretty sure TWRP is supported on all models of S6/Edge, they all share the same hardware as each other.
Just flash it with Odin version 3.10.6.
Grab it here ZeroFLTE represents all S6 models except Sprint model which require their own special one (no idea why)
You then follow the Odin install method, making sure you're using 3.10.6. Otherwise more than likely will not work.
After installation of TWRP and then booting into TWRP you will be faced with the "SuperSU is not installed, would you like to install it?"
.. And done.
Er, actually I think that appears when when you go to restart via TWRP menu
But yeah.. best of luck, don't blame me if your phone explodes into a fire ball that goes nuclear and destroys the world.. Or simply bricks it
Edit: Wait are you talking about the Chainfire root method? If you are you may as well not even consider that if you're planning on custom firmware installs.. TWRP is your best bet because it isn't device/firmware specific like CF. And you need TWRP for firmware installs anyway..
Click to expand...
Click to collapse
Thanks mate!So twrp now supports 5.1.1?

Welcome! TWRP has supported 5.1.1 since the latest version: 2.8.7.1. Change log is in the second post here. Take care and have fun

Stevles said:
Welcome! TWRP has supported 5.1.1 since the latest version: 2.8.7.1. Change log is in the second post here. Take care and have fun
Click to expand...
Click to collapse
Thanks again!But I thought the only way to root the gs6 with 5.1.1 is by using the unikernel something?as 5.1.1 is different than 5.0.2.

hlm19 said:
Thanks again!But I thought the only way to root the gs6 with 5.1.1 is by using the unikernel something?as 5.1.1 is different than 5.0.2.
Click to expand...
Click to collapse
Not sure about that.. Perhaps install unikernal first just to be sure
Okay so go to the last page or two of the TWRP thread and start reading

Stevles said:
Not sure about that.. Perhaps install unikernal first just to be sure
Click to expand...
Click to collapse
Yeah,just checked and have to flash unikernel first and then the twrp via odin.If I root using this twrp method,it supports my 5.1.1 firmware right?Sorry for lots of asking.

hlm19 said:
Yeah,just checked and have to flash unikernel first and then the twrp via odin.If I root using this twrp method,it supports my 5.1.1 firmware right?Sorry for lots of asking.
Click to expand...
Click to collapse
Assuming it doesn't boot loop with unikernel (all reports say it's fine) then yeah you won't have any dramas with root via TWRP.. Like I said it's just software, the boot loop comes from Samsung being slippery Gypsies and modifying their kernels to basically stop people from modifying system partitions. Hence the need for a custom kernel to bypass that crap. You'll be fine

Stevles said:
Assuming it doesn't boot loop with unikernel (all reports say it's fine) then yeah you won't have any dramas with root via TWRP.. Like I said it's just software, the boot loop comes from Samsung being slippery Gypsies and modifying their kernels to basically stop people from modifying system partitions. Hence the need for a custom kernel to bypass that crap. You'll be fine
Click to expand...
Click to collapse
Yeah,and if I need to unroot it,I do just flash the official firmware via odin?

hlm19 said:
Yeah,and if I need to unroot it,I do just flash the official firmware via odin?
Click to expand...
Click to collapse
Sorry for delayed response.. Yes flashing a firmware tar. md5 will reset the system partition back to full stock and replace the recovery, kernel, modem etc.
Just download one corresponding to your device ie.. SM-G92XX where the first X is either a 5 or 0 and the second is the country or region the phone was intended for. I keep the latest firmware for my device and country (not carrier because it has too much bloatware) around at all times to undo any screw ups and start again

Stevles said:
Sorry for delayed response.. Yes flashing a firmware tar. md5 will reset the system partition back to full stock and replace the recovery, kernel, modem etc.
Just download one corresponding to your device ie.. SM-G92XX where the first X is either a 5 or 0 and the second is the country or region the phone was intended for. I keep the latest firmware for my device and country (not carrier because it has too much bloatware) around at all times to undo any screw ups and start again
Click to expand...
Click to collapse
Thanks for the help!Will try it

Try this:
http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395

roydok said:
Try this:
http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Click to expand...
Click to collapse
I think he may have already actually, thanks for your input. It was certainly mentioned earlier but now there's a link which is always nice

What does tripping KNOX do? I like and would like to continue using the Tap & Pay feature from my bank. Is KNOX separate from the secure element the bank uses?
Other than providing a separate environment for work, what else does KNOX provide?

[Q] Fixing the modem in a TWRP Recovery, Rooted Stock 4.4.4 Sprint Galaxy Note 3

I know 100% for fact that the phone is Spark enabled. I did a stock update to Lollipop once and had great Spark signal on my device. I hate Lollipop and my apps that require root access do not function on Lollipop.
I am wondering what I need to do in order to access Spark LTE again. I am using a 4.4.4 stock rom that is rooted via TWRP and Super SU. I don't recall exact versions and such as I have been using the same stock rom for a year now.
I recently retried 5.0/5.1 and my rooted apps still have issues, so I do not want to use Lollipop.
Is there a modem file I need to change to be able to get Sprint Spark? I had it before also on 4.4 when the phone was 100% stock and I did the official update to 4.4 from 4.2 or 4.3(been a year).
The phone was bought out, no longer under warranty as of November, and Knox already tripped so I don't care about any of that. The phone was manufactured Sept/Oct 2014 if that helps.
Any suggestions?

Mplode said:
I know 100% for fact that the phone is Spark enabled. I did a stock update to Lollipop once and had great Spark signal on my device. I hate Lollipop and my apps that require root access do not function on Lollipop.
I am wondering what I need to do in order to access Spark LTE again. I am using a 4.4.4 stock rom that is rooted via TWRP and Super SU. I don't recall exact versions and such as I have been using the same stock rom for a year now.
I recently retried 5.0/5.1 and my rooted apps still have issues, so I do not want to use Lollipop.
Is there a modem file I need to change to be able to get Sprint Spark? I had it before also on 4.4 when the phone was 100% stock and I did the official update to 4.4 from 4.2 or 4.3(been a year).
The phone was bought out, no longer under warranty as of November, and Knox already tripped so I don't care about any of that. The phone was manufactured Sept/Oct 2014 if that helps.
Any suggestions?
Click to expand...
Click to collapse
i dont know specifically how to fix your issue, but im betting if you look in your devices general forum, you will find a thread with all the available modems. you may have to try a couple until you figure out which one is correct for your version, if its not noted.

I need a rooted rom for Galaxy SM-G920V anything later than OG7

So basically I never wanted to update my phone but I accidentally pressed Install Now when I was trying to open the messaging app. Now I can't root it anymore or downgrade it. Worst mistake ever for my phone :crying:
So my phone found a new update, but I don't want to update it because I want to look for a updated ROOTED rom that is later than OG7. If anyone has a odin flashable / zip flashable, PLEASE message me. I have a friend that works with android roms, he said that its something to do with the bootloader and it has to be rewritten by hand to make it rootable because of verizons bootloader, and to unlock the bootloader. PingPongRoot doesn't work anymore after the 5.1.1 update. I really hate this update. it slowed my phone down a lot. **** you verizon :crying::crying::crying:
Anyways I need a rooted rom to flash on my phone to make my phone think its signed by Samsung or Verizon and it's a new update. Please help me root my phone. I really got nothing to root it now ;-;

AndroidFan16 said:
So basically I never wanted to update my phone but I accidentally pressed Install Now when I was trying to open the messaging app. Now I can't root it anymore or downgrade it. Worst mistake ever for my phone :crying:
So my phone found a new update, but I don't want to update it because I want to look for a updated ROOTED rom that is later than OG7. If anyone has a odin flashable / zip flashable, PLEASE message me. I have a friend that works with android roms, he said that its something to do with the bootloader and it has to be rewritten by hand to make it rootable because of verizons bootloader, and to unlock the bootloader. PingPongRoot doesn't work anymore after the 5.1.1 update. I really hate this update. it slowed my phone down a lot. **** you verizon :crying::crying::crying:
Anyways I need a rooted rom to flash on my phone to make my phone think its signed by Samsung or Verizon and it's a new update. Please help me root my phone. I really got nothing to root it now ;-;
Click to expand...
Click to collapse
Sorry, it doesn't exist for the Verizon Galaxy S6. The last rooted ROM was OE2.
Mike

AndroidFan16 said:
So basically I never wanted to update my phone but I accidentally pressed Install Now when I was trying to open the messaging app. Now I can't root it anymore or downgrade it. Worst mistake ever for my phone :crying:
So my phone found a new update, but I don't want to update it because I want to look for a updated ROOTED rom that is later than OG7. If anyone has a odin flashable / zip flashable, PLEASE message me. I have a friend that works with android roms, he said that its something to do with the bootloader and it has to be rewritten by hand to make it rootable because of verizons bootloader, and to unlock the bootloader. PingPongRoot doesn't work anymore after the 5.1.1 update. I really hate this update. it slowed my phone down a lot. **** you verizon :crying::crying::crying:
Anyways I need a rooted rom to flash on my phone to make my phone think its signed by Samsung or Verizon and it's a new update. Please help me root my phone. I really got nothing to root it now ;-;
Click to expand...
Click to collapse
Have you tried updating to Marshmallow? I'm on CleanROM 1.5 android 5.0.2 OE2, and have been curious of the new android version, but at the same time do not want to lose root. Let me know if Marshmallow is worth losing root. Only advantage I see to root at this point is not having all that damn bloatware I really hate and cannot remove without root. Thanks.

isruco said:
Have you tried updating to Marshmallow? I'm on CleanROM 1.5 android 5.0.2 OE2, and have been curious of the new android version, but at the same time do not want to lose root. Let me know if Marshmallow is worth losing root. Only advantage I see to root at this point is not having all that damn bloatware I really hate and cannot remove without root. Thanks.
Click to expand...
Click to collapse
I rather not update it unless
1: A root method is available
2: A rooted rom for Marshmallow is available
Just saying. upgrading to 5.1.1 unintentially (mainly because i was directly going to the messaging app but accidentally pressed install now) made me loose my root access. That's why I'm seeing if there is a rooted rom for that rom or a root method for that room.

AndroidFan16 said:
I rather not update it unless
1: A root method is available
2: A rooted rom for Marshmallow is available
Just saying. upgrading to 5.1.1 unintentially (mainly because i was directly going to the messaging app but accidentally pressed install now) made me loose my root access. That's why I'm seeing if there is a rooted rom for that rom or a root method for that room.
Click to expand...
Click to collapse
From what I understand, it seems verizon is never going to allow it. Just look at Note 4 from verizon, it came out in 2014 and still no sign there will ever be root available for that one either. I'm even considering moving to tmo since there is root on their devices. Good luck.

isruco said:
From what I understand, it seems verizon is never going to allow it. Just look at Note 4 from verizon, it came out in 2014 and still no sign there will ever be root available for that one either. I'm even considering moving to tmo since there is root on their devices. Good luck.
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4-verizon/general/note-4-verizon-bootloader-unlock-t3358913
sent from your mom's phone.

Droid_JD said:
http://forum.xda-developers.com/note-4-verizon/general/note-4-verizon-bootloader-unlock-t3358913
sent from your mom's phone.
Click to expand...
Click to collapse
Wow, I'll have to check this out. Maybe verizon SGS6 5.1.1 and later will come some day as well.
Thanks for the info :victory:

isruco said:
Wow, I'll have to check this out. Maybe verizon SGS6 5.1.1 and later will come some day as well.
Thanks for the info :victory:
Click to expand...
Click to collapse
Still sticking in 5.1.1
maybe it might work in the future exploits