Hello, anybody could to help me?
My galaxy ace s7275b is totally bricked, NO download mode, not three buttom, only my pc reconized it like qualcomm 9008 What can i do?
Well, if you can neither get in download mode nor recovery, your phone is - as the term "bricked" says - as useful as a brick. I'd recommend to go to a store and tell them that your phone won't turn on - obviously, you should not say that you rooted it. Maybe they will give you a new one, if not, there's nothing you can do.
Related
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix
So today, I tried to install TWRP onto a standard, 4.0.4 Samsung Stellar. Followed the instructions, went through Odin, and it failed with auth errors. Well, crap. Reboot the phone, get into there, and try to use GooManager to do it for me. I let it do the standard OpenBootloader or whatever, didn't work. So then I tried EZ-Unlocker. Unlocked just fine, until I turned off the phone. Try booting it, nothing happens; no vibration, no sound, no screen, nothing. I thought this was a dead battery (The battery was running at literally, 3% after I used EZ-Unlocker), so I plugged it in. No red light. Take out the battery, slap it back in. Same result, nothing happens to the phone. Well, crap. Try holding the power button again, nothing happens. Connect it to my computer and it reads it as some QUSB or whatever; look that up, download and installed a driver file for Qualcomm, and now Odin3Execution recognizes it, but Odin 3.07 doesn't. However, I still cannot use Odin to try flashing a new ROM onto it or anything because I cannot get into Odin mode. I was thinking of buying a USB jig to get it into Odin, but I want to confirm with someone else that this is a full hard-brick and not me being stupid.
tl;dr: Stellar doesn't boot at all; power button unresponsive, cannot get into recovery or download/odin mode; computer recognized it as QHSUSB_DLOAD, installed drivers to get it to be recognized as a Qualcomm HS-USB QDLoader 9008 at COM7. Very similar to http://forum.xda-developers.com/showthread.php?t=822939 but just a different phone.
edit: I found this: http://rootzwiki.com/topic/109153-howto-unbrick-a-bootloader-bricked-stellar/ but the download link times out. I'm willing to try this since it may solve the problem. Does anyone know where I can find a mirror of the download link?
edit2: I just sent a PM to invisiblek here on XDA.
edit3: And thanks to invisiblek, I managed to get it into download mode! Solved; if you want the stella-unbrick file, shoot me a PM and I'll upload it somewhere.
I an also looking for solution and need your help.
Sent from my SCH-R830 using XDA Free mobile app
Sch-i200 bricked download page required
hello
could you give the download link where I can find bricked soln. as such I bricked my stellar and I want to use it in India so I want to unlock it too.
Kindly help and hope to get back from you soon
i rooted my phone and i wanted to switch rom for it,i flashed h850 rom rebooted device and it wont boot...i figured im on qualcomm 9008 mode in my computer so what can i do?
please please help me!!
thanks in advance..
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
You probably didnt understand me well.. I cant put it in any mode...it wont turn on on any condition..
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Dark Nightmare said:
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Click to expand...
Click to collapse
The computer recognizes my device as qualcomm 9008
I have the same problem. My phone is dead only shows Qualcomm 9008.
Silly... If it's not for your phone why would you flash it??? Might have to wait for the official kdz from lg assuming you can some how get it into download mode. Or simply use your insurance for a new device. Expensive lesson learned
Maybe you can try the lg mobile support tool, since a tot file is available LG may have the stock kdz file available now, so try the recovery option for the mobile support tool.
Pretty sure that Qualcomm message thing is the true hard brick...
Sent from my pretty nifty brand new LG V10
This might sound stupid and it is usually for devices which have problems turning on or similar. I think is better to try anything that not trying all the options.
Why dont you try removing the battery, then close the module part without the battery. Press and hold the power button for at least 30 seconds. then release it. then put the batttery back on and try to make it boot into download mode. Chances are slim but the chance still there. This worked with my Samsung galaxy s5 after i flashed a rom that claimed to be for all models including the tmobile version when it clearly was for the g900f version . and i decided to try what i have done with other types of electronics and it worked.
Just tried on my phone. No go. Still dead. Trying lg repair. Hope I can get it fixed and not cost a arm and a leg.
Here is a guide to recover from 9008 mode
Here is a tool to extract kdz from tot
I've not read through these all the way, but if the PC sees it at all, it's not truly bricked... It might just be a pain in the ... to get it fixed. Those 2 links are good starting points for you. I hope you get this resolved.
I have the same error... My LG g5 H860 no turn on only connect in the PC on mode Qualcomm HS-USB QDLoader 9800.
Any idea or solution to resolve this?
Thx
BR
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
same issue just that my lgg5 tm is stuck on the firmware update for trying to root via lgup/tot file now not even lg bridge reads the phone it wants to then it says can not odetect nothin has worked
Hello This is my first post here and i really need help. I got a phone that is hardbricked and when i turn it on it is stuck on LG Logo. I cant enter download mode, recovery mode, hard reset mode its just stuck.
When i plug it in into the PC nothing happens, i installed all the drivers for it and still nothing not even a sound that it loaded. I did a lot of google research and i see that there is an option to do it in Qualcom mode.
But to do that i need to find the testpoint first. This is the only thing that i found https://forum.xda-developers.com/android/general/lg-d320-l70-testpoint-location-t3422105 but the problem is that i cant turn on my phone when my components are apart and everything is disconnected. So later i saw that this cannot be and i was wondering if anyone knows where i can find testpoint and how to i repair my phone.
Thank you and sorry for any missunderstanding that i caused
My friend has approached me with a used Samsung Galaxy J7 (J700F) (recently purchased) and it was bricked. I didn't asked why he bought a bricked device. No judgements bro! :fingers-crossed:
After the initial inspection, i've found that the device can go only to download mode, but couldn't go into recovery mode. Also, normal boot up is not working. So, i decided to flash stock firmware using Odin.
But, the phone doesn't stay in Download mode. It does go into download mode for like 5-6 seconds max. After that, it turns off automatically. Because of this, Odin is NOT showing PASS :crying:
Along with this, the phone is not getting detected in PC at all!
Things i've tried so far:
I've dried several combinations of connecting and rebooting the device, but the PC doesn't detect the phone at all!
I've already installed Samsung usb drivers.
I've uninstalled all usb device in Device Manager (including hidden devices).
Tried battery removal and power cycling
Nothing seems to be working. At this point, i am beginning to consider this as a hard brick. So kindly suggest me any tips and tricks that might help me unbrick the device.