rebooting s2 3g - Samsung Gear S2

I see a lot of you saying you've rebooted your watch. Can someone please tell me how that's done. Cuz i'm not seeing where that's possible.
I can't get any apps to install because i'm getting the gear2 not connected message. I've rebooted the phone but that didn't fix the problem.
THANK YOU.
ALSO, how do i check for and download the latest rom for the s2? If there's an update.

Press and hold the bottom right button
Assuming you wore the watch on your left hand, there are two buttons on the right side - towards the fingers of your left hand.
Press and hold the button on the bottom, and it will show you a menu to power off.
Repeat to start again.
snowwy66 said:
I see a lot of you saying you've rebooted your watch. Can someone please tell me how that's done. Cuz i'm not seeing where that's possible.
I can't get any apps to install because i'm getting the gear2 not connected message. I've rebooted the phone but that didn't fix the problem.
THANK YOU.
ALSO, how do i check for and download the latest rom for the s2? If there's an update.
Click to expand...
Click to collapse

From Tmobile support :
A master reset restores the original factory settings and may delete your personal data on the internal storage, such as downloads, ringtones, images, apps, contacts, and Visual Voicemail.
If the device menus are frozen or unresponsive, you can master reset using hardware keys. To perform a master reset, follow these steps:
Make sure that the Gear is powered off.
Press and hold the Power key until you see Galaxy Gear rebooting.
Release the Power key and then repeatedly press the Power key until you see the Reboot Select Mode screen.
Press the Power key to highlight the recovery option.
Long press the Power key (5-8 sec.) to select it. The device will reset and return to the factory initialization screen.

You can also directly reboot by simply holding the power/home button a bit longer -- about 10 seconds.
Press and hold, and when you see the "power menu" with the Power Off option, just keep holding the button until it appears to power off / go blank. Then, let go of the button. It will shortly display, "Rebooting...", and reboot.
Now, for those compsci folk out there, I don't know if this will cause any problems with caches/etc., leaving behind corrupt file system data structures or corrupting actual data, because it's not a proper shutdown of the linux kernel on the watch.
Yet, it is much simpler than the shutdown/restart method, and easier on the button (one press vs. two).
I'm not too worried, though, for a whole bunch of reasons about how linux is implemented on small and embedded devices like this with NV storage.

Related

Captivate will not hard reset.

I have tried hard resetting my phone, but I cant' get it to work. With the phone off, I hold the "volume down" key and press the power button. If i press the power and release quickly, nothing happens. If I hold it long enough for anything to happen, the phone just starts up normally. What am I doing wrong?
Also, If i reset the phone from the privacy menu, does it do the same thing as the above method?
no idea on the second question but try holding the volume up and down at the same time and then pressing the power button until it starts to boot. Continue holding down volume up and down and release the power button once it starts booting. Let us know if this did it for you.
I think you need to hold the volume control button (both Up & Down together) and the Power button until the Reboot screen appears.
Yea but none of the options will reset my phone...
My son was playing with the pattern lock and locked my phone, recovery using gmail username/pass don't work, so I need to hard reset it...
I've done the "delete all user data" and "delete cache data"
But it hasn't removed the lock... and I see my wallpaper is still the same...
Any other ideas... I am stuck with a $200 paper weight right now!!
Update: Fantastic!! Called Samsung, they said it's a bug and I need to send it in to be reflashed... hell no, back to the AT&T store I go... EXTREMELY dissapointed in AT&T / SAMSUNG.... It appears the standard Vibrant S can reset to factory settings!
Thanks,
Rich

[Q] Samsung Nexus s hard reset dont work

hi guys,
i just god nexus from a second hand store. i want to hard reset it but it does't.
it is stuck in the screen where the little green guy with the triangle with an exclamation mark next to it. please help.
is there a way to load the factory rom manually?
(i know how to jailbrake and downgrade an iphone so this should not be so hard)
Hold volume down and press on once you see menu with recovery
press volume again and you will see option for clear storage - thats what you want
that is what i have done already. but why is the mobile preventing me from hard reset ?
I have been hanging around the XDA forums (as well as every other forum I could think of) and have been unable to solve my re-set problem.
I got my Nexus S about a week ago and decided to unlock it. That went well, no problem. Then I decided to root using Superboot - that did not go well. Now my phone is unresponsive, just sits on the Google name with an unlocked padlock on a black screen. I can get into fastboot mode by using the volume up and power button if I do this right after replacing the battery. I cannot seem to go anywhere else. Once I got into a menu that would let me install from sd card, but none of the options would install. I followed the following directions to see if I could do a hard reset:
Hard reset Nexus S using hardware buttons
This option is recommended if you are unable to access the options via the Android OS.
1. Turn the phone off by pressing and holding the Power button for about 2 seconds, the tapping Power off. Alternately, you can pull the and replace the battery.
2. Press and hold the Volume Down button while pressing and releasing the Power button.
3. Continue to hold the Volume Down button until you see a menu appear.
4. Now tap the Volume Down button to scroll down to the Clear Storage option.
5. Press the Power button to select Clear storage.
6. Press Volume Up to select Yes.
After a few minutes the hard reset process will be completed and you can reboot your phone to factory default settings.
I never get to the clear storage option, although I have tried data/factory reset and wipe cache. I can get to the android with the triangle and exclamation point but that will just sit for ever, and removing the battery at that point and then rebooting does not work. It just takes me back to the Google and the unlocked padlock. FWIW - my phone updated right before I unlocked it. I don't think it is bricked, but I sure can't get passed the Google name or the Triangle/android.
Thanks for any help.
heliosue
I've the same problem now - did you ever resolve yours?
Here is how
Power off by removing battery
Hold vol up not down and power,
release power and you get Fastboot mode
vol down to recovery and click power
You get the screen with Android + triangle
Click up and Power again for few seconds
you will get the 'Android Sys recovery'
However if you have my problem 'error in loading the built in SDcard memory this wont help.
The only way i managed to get it to work some times although not now, is to reboot the mobile while it is connected to a PC, and load the PC at the same time.
However this time i am stuck at Google screen
hi guys
have same problem for no reason, the nexus s just keeps rebooting its selp for no reason, i get the power manager error when its booted up
i have tryed to reset from setting and no go, it reboot before i get too far and i tryed to reset from powering up with one finger on vol up and other on power button, i get into recovery and see the android and then i barly see the android on his back with ! and it reboots into its self with out resetting
this has never happened before and i dont know why
i moved some of stuff to usb storeage but that all i done lately
any ideas

[Q] Samsung Xcover S5690 screen lock

Hi
Is there any way to remove a screen lock om this phone?
My son wishes to make one, but cant remember the code
Do i have to drop the phone into the garbage?
No good phone after all.
Hope some one can help me, or my son, with this.
Gaasen
You can factory reset the phone. I'm not sure, but I think if you keep guessing wrong, you'll get an option of logging in to the Google account associated with the phone, and.... well, actually, I don't know what happens then, since I've never done it or seen it.
post-mortem said:
You can factory reset the phone. I'm not sure, but I think if you keep guessing wrong, you'll get an option of logging in to the Google account associated with the phone, and.... well, actually, I don't know what happens then, since I've never done it or seen it.
Click to expand...
Click to collapse
Have to ask my son, if he has got that message about resetting.
Thanks
Gaasen
He hasent got that option.
Other options, to unlock ?
Gaasen
Try this:
Hardware key Reset:
1. Press the Power button to turn off the unit.
2. Press and hold down the Volume Down button located on the side of the device, then press the Power button and release it.
3. The phone should start with a menu present a list of options.
4. Use the Volume Down button and navigate to the Clear Storage option.
5. Then press on the Power button.
6. Select Yes to confirm your choice of selection.
Your Samsung Galaxy Xtreme S5690 will now reset back to factory default settings and all your data will be erased.
Hmmm...
The phone just start up, and wants the code
No list as you told.
Any other things to try out?
Gaasen
Make sure you hold down the Volume down button long enough. If still nothing, try other key combinations to get boot into factory recovery.
Cant get the "meny" to reset the phone.
If i push and holds the voloume down, press power for 2 sec, release power and still holding the voloume down, the phone loads until the screen lock appears.
I also tryed the other buttons, but just load until screen lock.
Is there any other way to reset the phone, with USB or so?
Gaasen
http://forum.xda-developers.com/showthread.php?t=1951737

[Q] Razr HD in infinite loop after hard reset, any fix?

I have a Fido Razr HD (xt925) in Canada, running stock JB, not unlocked/rooted/anything, just the standard phone.
So I did a hard reset, on the suggestion of some to deal with the stuttering issues (which I found were quite bad). Now I have somewhat of a worse issue, it's stuck in an infinite loop of the android update logo (the green android with the spinning blue thing), then a black screen then the motorola logo. Occassionally it shows the android logo on it's bag with a red symbol with a ! in it (which I presume means it's corrupt). It's just repeating endlessly. After 20 minutes or so I tried a few things, plugging it into a PC, holding down the power/volume up/volume down buttons (which makes it go to a black screen while I'm holding them, but then it goes back to looping as soon as I release them), nothing works.
Any suggestions on what I can do or is this a return to the store because it's dead problem?
Just try Power + volume down for 10 seconds (simulates a battery pull.) Aside from that if you can get into stock recovery try wiping data and cache and then rebooting. If you can't, take it back.
champdood said:
I have a Fido Razr HD (xt925) in Canada, running stock JB, not unlocked/rooted/anything, just the standard phone.
So I did a hard reset, on the suggestion of some to deal with the stuttering issues (which I found were quite bad). Now I have somewhat of a worse issue, it's stuck in an infinite loop of the android update logo (the green android with the spinning blue thing), then a black screen then the motorola logo. Occassionally it shows the android logo on it's bag with a red symbol with a ! in it (which I presume means it's corrupt). It's just repeating endlessly. After 20 minutes or so I tried a few things, plugging it into a PC, holding down the power/volume up/volume down buttons (which makes it go to a black screen while I'm holding them, but then it goes back to looping as soon as I release them), nothing works.
Any suggestions on what I can do or is this a return to the store because it's dead problem?
Click to expand...
Click to collapse
Did you ever get it fixed? I had the same issue and eventually found a path to success. Let me know if not and I'll see if I can help!
zimzum57 said:
Did you ever get it fixed? I had the same issue and eventually found a path to success. Let me know if not and I'll see if I can help!
Click to expand...
Click to collapse
I wouldn't mind if you posted your path to success in case I run into the same problem at some point. My bootloader hasn't been unlocked as of yet. I'm holding out for a ROM that's really, really worth a proper flashing but am scared as hell about the issues people run into.. factory reset loops and failures, bootloader unlock loops now apparently. With the exception of Busybox, which has an uninstaller, I have everything symlinked into my /system directory from a folder in /data and it works great and makes everything easy to keep track of but there's always the doubt of the stray app that put a file there when I granted permission and I didn't know about it.
For my Razr HD, I found that holding volume up and down while the android logo did it's spinning until it ended got me to the recovery menu.. However this hasn't really fixed anything, every time I restart the phone it goes through the same process again and does a hard reset all over again. After a few seconds in the recovery menu it restarts the phone again and goes through a normal load process, but the phone is hard reset every time. It doesn't matter what option I select in the boot menu, it does the same thing (so I don't think it's detecting what option I select at all).
So back to Fido it goes.
Scratch the above post, someone posted a fix on the Fido forums that works perfectly, see thematrix49's post here - fido.ca/t5/forums/forumtopicpage/board-id/Smartphones/thread-id/8805
Same issue. Took me a while to figure it out through an amalgamation of various online helps. I repeated it several times to make sure it worked before I posted.
I was experiencing android logo with blue loading bar... after a few seconds it would stop and then quickly show the android symbol on its back with a red exclamation point logo. Then it would shut off.
- To restart, press and hold both power and volume down for approximately 10 seconds, then let go of the power.
(Should show Motorola logo, then go to green Android logo again)
- At Android Logo, immediately press the middle of the volume up/down rocker.... this should engage both buttons at once.
(I was able to initiate this with one press in the middle of the volume rocker... other times it took me a few quick presses)
(If done properly, the screen should stop and some yellow text will appear on the left side of the android logo.. let it continue, it may fail)
It should say:
Formatting /data....
Formatting /cache....
Data wipe failied.
Performing BP Masterclear...
This will bring up a blue text menu at the top. Use volume up/down to navigate. Power to select.
Go down to "wipe data/factory reset" and select by hitting power. Go down to "yes" and select by hitting power.
It should properly format the /data and /cache after about a minute. Once it completes it will bring the blue text menu back up. Select "reboot system now" by hitting the power button.
Voila.
Click to expand...
Click to collapse
Took a while to get the volume press to work, it's just a press, not a press and hold. I just kept tapping it over and over until it worked.
Guys can you post your build.prop and default.prop files? it needed to get fido fw with jb.
THANK YOU.......My Motorola xt925 went "Boot Loop" after i reset the settings. Neither Telstra or Motorola could help. Excellent work Champdood.......
champdood said:
Scratch the above post, someone posted a fix on the Fido forums that works perfectly, see thematrix49's post here - fido.ca/t5/forums/forumtopicpage/board-id/Smartphones/thread-id/8805
Took a while to get the volume press to work, it's just a press, not a press and hold. I just kept tapping it over and over until it worked.
Click to expand...
Click to collapse
You are a king among men. I was stuck on this issue for so so so so long. I was downloading roms and trying to flash them and god knows what else!
champdood said:
Scratch the above post, someone posted a fix on the Fido forums that works perfectly, see thematrix49's post here - fido.ca/t5/forums/forumtopicpage/board-id/Smartphones/thread-id/8805
Took a while to get the volume press to work, it's just a press, not a press and hold. I just kept tapping it over and over until it worked.
Click to expand...
Click to collapse
THANK YOU! You just saved me so much trouble and it was quite the worrisome situation I was in. Sidenote for anyone reading this after June 6, 2013. The link to that Fido forum may be dead but Champdood's instructions are the straight goods! :good:
Is there a permanent fix for this? I have to go through those fix steps every time I wipe my phone as it continues to go into loop...
FunkmasterC said:
Is there a permanent fix for this? I have to go through those fix steps every time I wipe my phone as it continues to go into loop...
Click to expand...
Click to collapse
Me too! I also noticed that the version that re-installed (the one time I did it) wasn't completely stable. It acted super weird adding an icon of one of my apps to the top left position of the screen one swipe over from the main/home screen every time I did a reboot.
At first I didn't even know what was happening only that my Google Now widget (which I usually keep in that space) was disappearing every time I rebooted and an icon was in the top left corner instead. Finally, I realized what was happening. Weirdest part of it all is that if the OS put an icon in there, on a reboot it would remain the same. But if I tried putting an icon there (or widget) on reboot it would be replaced.
Champdood saved my phone...
I would like to add that the same thing happened to me. I performed a factory reset from Settings > Privacy > Factory Reset and that just sent the phone into an endless loop of red logo > android logo > android logo on back > power off > repeat. Nice job Motorola.
On Motorola help pages it was all about Power button + Down and getting the white menu where you volume down to choose and volume up to select. That would successfully reset the phone but as soon as I powered down and up again: back in the infinite loop.
In desparation, I found this thread. Completely unique to hit the Power Up+Down simultaneous as a press not a hold when see the Android logo, indeed, brought up a blue screen, followed the instructions, successfully reset and so far, have been able to successfully power down and back up again. Will be bookmarking this page.
Thank you so much Champdood!
Alternative External Reset Instructions from Motorola themselves...
Hey, as mentioned Champdood's factory reset instructions work fine. Since reading this thread, I realized other's are having the same problem resetting using the menu (Settings > Privacy > Factory Reset), so I initiated a chat with Motorola about this. The person would not respond to my quizzing about the reason for this but did say it was called an Internal Reset and then named Champdood's method the External Reset. He also gave slightly different instructions for accessing the blue menu. I am reproducing both sets of instructions for you all here:
From Motorola Customer Service:
PERFORMING AN INTERNAL RESET:
From the home screen of your phone, touch Menu
Touch System settings
Scroll down and touch Privacy
Touch Factory Data Reset
Scroll down and check Erase internal storage if you would like to erase all the data on the phone internal storage such as applications, music, movies or photos.
Touch Reset Phone
PERFORMING AN EXTERNAL RESET:
WARNING: When using this feature; everything is deleted from the device.
NOTE: Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
The device will display different BOOT OPTIONS
Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
Press and hold the VOL DOWN key for 5-10 seconds
While still holding the VOL DOWN key tap and release the VOL UP key.
The device will display additional menu options (Text will appear in BLUE)
Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to SELECT this option.
Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
Once the Formatting is complete, press the POWER key to confirm a REBOOT
The device will reboot and start the normal power up sequence .
Motorola Razor Issue Fixed
Your Tip really helped me fix my Motorola Razor HD phone.
Created my account only to write a thanks and to comment for the same.
Thanks
Another thanks.
My wife's phone was doing this after a Settings menu factory reset, but the instructions champdood posted worked.
I had to re-re-format the data and cache partitions about four times, but after that it worked!
And somehow root was preserved; SuperSU was missing, but I had root over adb.
Cheers champdood.
Perfect fix
champdood said:
Scratch the above post, someone posted a fix on the Fido forums that works perfectly, see thematrix49's post here - fido.ca/t5/forums/forumtopicpage/board-id/Smartphones/thread-id/8805
Took a while to get the volume press to work, it's just a press, not a press and hold. I just kept tapping it over and over until it worked.
Click to expand...
Click to collapse
Hey Champdood, THANKS! Your fix worked a treat - XT-925 now back on-line and loving it!!
Awesome, looks like the fixed worked on this POS Motorola I got here at work. Thanks.
my verizon xt 925 stucks at the loading screen logo, after it i had a low battery and it went off. Please help, my email is [email protected]
anthony
hello guys
i have the problem with my motorola xt925,
it refused to boot, uit only gets stuck at the loading screen logo (the red eye)
i tried hard reseting it but it does not show the android distress after i selected the recovery in the boot menu.
please help

Cello dpm1081 tablet wont start

My DPM1081 wouldn't start beyong "CELLO Powered by Android" and was apparently doing nothing for a few hours. It had been getting slower and slower anyway so I decided to factory reset it.
I'm not quite sure of the sequence and would appreciate you telling me exactly whatr to press, for how long and what sequence to release. I somehow managed to get into the menu using the volume and power buttons.
The on screen instructions say to use vol up & down then power to select but the power button did nothing, the vol down moved the cursor and vol up selected the option.
I selected factory reset, it asked for confirmation on a long list of no's with a single yes in the middle, which I selected.
It said it was clearing data then returned to the menu and invited me to reboot which I did.
It is now sitting with "CELLO Powered by Android" apparently doing nothing.
What do I do now?

Categories

Resources