This is LineageOS 11.0 for Samsung Galaxy Core Plus SM-G350. (if you have a letter in the end, ask me before flashing. Ex. SM-G350A)
Only compatible with SM-G350! Only for Single-SIM variants with Android 4.2.2
Milestone release (nearly stable)
This is ready for daily use and is stable as possible!
Thanks to @berkantkz, @zim555 and @sandpox!
Report all unknown bugs in to the "Bug Reports" tab.
What is tested and working
Boot, screen, basics..
Wi-Fi
Bluetooth
NFC
GPS
Audio input/ouput
Calls
Mobile data
MTP
Camera
What is not working
Calls with Bluetooth headphones. (includes any Bluetooth devices)
Codecs are not usable for some browsers/apps.
Some apps can't record video. GLES related problem.
ATTENTION! Video recording:
Recommended settings: 480p h.264 + aac
720p recording works only with mpeg4 encoding!
Set camera settings before trying to record video!
Downloads
April 2018 (20180404)
BlueBorne fixes
Everything up to March ASB
Other upstream changes
lineage-11-20180404-UNOFFICIAL-cs02.zip
How to install:
Special thanks to @Giovix92 for making this tutorial!
Requirements:
1: A computer with Windows.
2: An Internet connection.
3: A backup of your phone data (contacts, photo, music, videos, and other).
4: About 300 MB free space on your SD card.
5: Phone charged at least 80%.
I do NOT take any responsibility for bricked devices!
Let's start!
1: Download the Samsung USB Drivers.
2: Download the ODIN3. (Only for Windows)
3: Download the TWRP Odin package to your desktop and download the LineageOS 11 ZIP to your SD card.
4: Make a backup of your files, because the storage will be wiped. (External SD card will not be wiped)
5: Reboot your phone in to the Download mode (Volume Down- , Home- and Power button). Press the Volume Up button when asked. Then open the ODIN3 and connect your phone to your PC.
6: Press AP and choose the TWRP Odin package and make sure re-partition is NOT ticked. (whatever.tar)
7: Press start! Wait a few seconds. Then your phone will be rebooted. Now you can disconnect the cable and power off your phone.
8: Boot your phone in to the TWRP Recovery (Volume Up-, Home- and Power button).
9: Go to Wipe, and Swipe to Factory Reset.
10. After wiping go to the home screen by pressing the home button.
11: Go to Install. Choose the External SD from the top bar. (It says "Storage: Internal Storage (xxxxMB)" by default)
12: Choose the LineageOS 11 ZIP and Swipe to Confirm Flash. Make sure you don't power off while flashing!
13: After the zip has been flashed choose "Reboot System".
14: Wait 5-15 minutes to boot the phone. If the phone keeps booting take out the battery and do a Factory Reset again.
15: When the phone boots the first time, go through the Setup Wizard and you are ready to use your phone!
If there was something you didn't understand, please don't hesitate to ask
Source
Device tree
Kernel
Kernel Toolchain
Proprietary files
XDA:DevDB Information
LineageOS 11 for Samsung Galaxy Core Plus SM-G350, ROM for all devices (see above for details)
Contributors
santeri3700, berkantkz, TimSchumi
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: Anniversary Release
Stable Release Date: 2017-12-31
Created 2016-01-02
Last Updated 2018-04-05
Tested with my device:
Samsung Galaxy Core Plus SM-G3500 EUR Single-SIM
Baseband: G350XXUAOB1
Used my TWRP to flash.
Download TWRP Stable release 2 or newer here!
Wow fantastic! Do you do make kernel in version 3.4.x? Do you changed all the kernel? You don't based on stock kernel?
Inviato dal mio LG-D802 utilizzando Tapatalk
deleted
matteo0026 said:
Wow fantastic! Do you do make kernel in version 3.4.x? Do you changed all the kernel? You don't based on stock kernel?
Inviato dal mio LG-D802 utilizzando Tapatalk
Click to expand...
Click to collapse
It's a modification based on the stock kernel. 3.4.5
santeri3700 said:
It's a modification based on the stock kernel. 3.4.5
Click to expand...
Click to collapse
With this you have to create a kernel works with multirom! In galaxy s2 plus a dev wouldn't like to create 3.4.5 kernel because he thinks he don't need and he needs a lot of time merging manually code from 3.0.101 to 3.4.5... It served a lot of time building your 3.4.5 kernel?
Inviato dal mio LG-D802 utilizzando Tapatalk
matteo0026 said:
With this you have to create a kernel works with multirom! In galaxy s2 plus a dev wouldn't like to create 3.4.5 kernel because he thinks he don't need and he needs a lot of time merging manually code from 3.0.101 to 3.4.5... It served a lot of time building your 3.4.5 kernel?
Inviato dal mio LG-D802 utilizzando Tapatalk
Click to expand...
Click to collapse
Samsung Galaxy Core Plus is shipped with Linux 3.4.5 kernel. This source which is we've used is stock Samsung source code with some modifications. It is almost fully stock kernel. So we hadn't waste effort and haven't took a lot of time.
kadjarT said:
Samsung Galaxy Core Plus is shipped with Linux 3.4.5 kernel. This source which is we've used is stock Samsung source code with some modifications. It is almost fully stock kernel. So we hadn't waste effort and haven't took a lot of time.
Click to expand...
Click to collapse
Do you think can help he? He needs people working on the project http://forum.xda-developers.com/gal...opment/kernel-hakykernel-3-4-5-t3089559/page4
santeri3700 said:
Tested with my device:
Samsung Galaxy Core Plus SM-G3500 EUR Single-SIM
Baseband: G350XXUAOB1
Used my TWRP to flash.
Download TWRP here!
Click to expand...
Click to collapse
This TWRP will flash the CM11?
Inviato dal mio SM-G350 utilizzando Tapatalk
matteo0026 said:
Do you think can help he? He needs people working on the project http://forum.xda-developers.com/gal...opment/kernel-hakykernel-3-4-5-t3089559/page4
Click to expand...
Click to collapse
If you asked to me, i can't help. I'm not good at kernel sourcecode
Video playback- Problem with 480p on YouTube?
QGM said:
Video playback- Problem with 480p on YouTube?
Click to expand...
Click to collapse
Video playback is not currently working. There is some patches out there and you can try them. (remember to take backups)
You can try if MX Player works, but YouTube and other is not working atm.
Try this patch, maybe it works. http://forum.xda-developers.com/android/development/patch-partially-video-fix-samsung-t3255599
santeri3700 said:
Video playback is not currently working. There is some patches out there and you can try them. (remember to take backups)
You can try if MX Player works, but YouTube and other is not working atm.
Try this patch, maybe it works. http://forum.xda-developers.com/android/development/patch-partially-video-fix-samsung-t3255599
Click to expand...
Click to collapse
https://www.raspberrypi.org/forums/viewtopic.php?t=126196&p=845063
Maybe this would help for video playback?
QGM said:
https://www.raspberrypi.org/forums/viewtopic.php?t=126196&p=845063
Maybe this would help for video playback?
Click to expand...
Click to collapse
It is vendor-tree issue. Not under kernel.
I think keyboard swipe to type doesn't work.
somehow... YouTube on CM11 does not allow 480p video playback on most video on my device GT-S7580 but CM12.1 does allow it
even you hack screen resolution to report tablet resolution to YouTube, it will allow you to play video with 720p but not 480p, idk why
Guys, I have a little bug report. Can i post here or i should use the 'Bug report' button in power menu?
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
sandpox said:
somehow... YouTube on CM11 does not allow 480p video playback on most video on my device GT-S7580 but CM12.1 does allow it
even you hack screen resolution to report tablet resolution to YouTube, it will allow you to play video with 720p but not 480p, idk why
Click to expand...
Click to collapse
In youtube you can hack the resolution with YourTube (xposed module, tested with stock rom)
Tested mx player and if u chose sw decoder it works. An idea to watch videos on utube is to put the videolink in a site for utube downloader (clipconverter.cc) and get the download link and put it on stream on mx player ) temp fix
Giovix92 said:
Guys, I have a little bug report. Can i post here or i should use the 'Bug report' button in power menu?
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
In youtube you can hack the resolution with YourTube (xposed module, tested with stock rom)
Click to expand...
Click to collapse
There is a "Report Bug" tab in the CM11 Thread. Report there
valera01 said:
Tested mx player and if u chose sw decoder it works. An idea to watch videos on utube is to put the videolink in a site for utube downloader (clipconverter.cc) and get the download link and put it on stream on mx player ) temp fix
Click to expand...
Click to collapse
Check the video patch. Then you can watch YouTube videos in 360p
Related
Hello!
This is development thread of CyanogenMod 10.0 by NovaFusion.
Credits:
marcin1147
Macław
Huge thanks to CyanogenMod team.
You can get it from http://novafusion.pl/.
Download is directly provided from our servers - it's fast, stable and fully resumable!
If you appreciate our work, please, use thanks button!
XDA:DevDB Information
CyanogenMod 10.0, ROM for the Samsung Galaxy Core
Contributors
New Macław, marcin1147
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Stable Version: 20150916
Stable Release Date: 2015-09-16
Current Beta Version: 20150906
Beta Release Date: 2015-09-06
Created 2014-07-16
Last Updated 2015-09-16
Features / Issues
Features
RIL – phone/messages/mobile data
camera (photo/video)
2D/3D HW Acceleration
GPS and A-GPS – fast fix getting
sensors
Wi-fi
all native tethers (Wifi/USB)
Google Play
CPU sleep mode
MTP
ADB
3.4.0 kernel
external storage
video playback
Issues
RIL doesn’t work in dual-sim (i8262) version – under development
please report any on a bugtracker
Changelog
20150916
implemented hardware color conversion
fixed aac playback
fixed whatsapp voice notes
improved media framework
20150908
Added missing binary blobs
Multimedia fixes
RIL permissions improvement
SD card permissions fix
CPU power management improvement
20140906
first beta release
Downloads
All releases and Google Apps are available for download from:
http://novafusion.pl
Download is directly provided from our servers - it's fast, stable and fully resumable!
Sources: http://github.com/NovaFusion
Thank!
Cool! Thank you for your work! There are screenshots?:good::good::good::good::good::good::angel::fingers-crossed:
Please also post the procedure to flash.
New release is out!
You can get it from:
http://novafusion.pl/
If you like it, please, use thanks button ( ͡° ͜ʖ ͡°)
New Macław said:
New release is out!
You can get it from:
http://novafusion.pl/
If you like it, please, use thanks button ( ͡° ͜ʖ ͡°)
Click to expand...
Click to collapse
Will android 4.4 Kitkat for samsung GT-8262?
Cool. Thankyou dev. We waiting for stable release
Sent from my GT-I8262 using XDA Premium 4 mobile app
New Macław said:
New release is out!
You can get it from:
http://novafusion.pl/
If you like it, please, use thanks button ( ͡° ͜ʖ ͡°)
Click to expand...
Click to collapse
Bro thanks for your hard work but we cant use a rom without camera and simcard....plsss fix it :what:
Always press the thanks button if helped
[email protected] said:
Bro thanks for your hard work but we cant use a rom without camera and simcard....plsss fix it :what:
Always press the thanks button if helped
Click to expand...
Click to collapse
Have patience bro. They had been working this long for the same.
Press thanks ...
afaquekhaja said:
Have patience bro. They had been working this long for the same.
Press thanks ...
Click to expand...
Click to collapse
Ofcourse bro I was just telling them
Always press the thanks button if helped
screenshots pls
Wow!! Feels like dream comes true.
But my bad it released when im abroad.
Cant download it today and do the test.
Sent from my GT-I8262 using XDA Premium 4 mobile app
waiting for the best and stable version..... thank you guyssss....
8262 users....We have to wait some more time bcoz even if its stable we wont be able to use it bcoz cm 10 does not supports dual sim variants....so keep calm
Always press the thanks button if helped
Here are some screen shots.
@new Maclaw
Here are some bugs which I've found so far. I'm using I8262.
-Camera intially opens but stucks after snapping a picture.
-system UI fc occasionally
-sd card not accesible via file manager
-Settings Fc after tapping on storage
-sound plays via front speaker for both vid n audio files
-torch app fc
-No network for any of the 2 sims
-apollo FC when attempting to play any file
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
For those who want play store - http://d-h.st/hWH
---------- Post added at 12:14 PM ---------- Previous post was at 11:54 AM ----------
EDIT ...
Internal storage and flash are accessible using 3rd party app from play store.
Also the camera initially worked and I even took some photos. But the next I open the app (3rd party) it says can't connect to camera.
More bugs apart from @afaquekhaja 's post
I'm using i8262 too.
- Keyboard crashed in messaging app, didn't come up for any application after that (wifi password, terminal emu) even after resetting input method
- SD card "switched" I think. Shows my external SD as internal (sdcard0)
- Trebuchet crashes (fc) but immediately restarts.
- Lock Screen stopped responding to touch
Also, this isn't a bug, but still informing that boot screen shows Samsung Galaxy Core GT-I8260 and not I8262
Anyways, excellent work on working CyanogenMod
ajinkya.nazare said:
More bugs apart from @afaquekhaja 's post
I'm using i8262 too.
- Keyboard crashed in messaging app, didn't come up for any application after that (wifi password, terminal emu) even after resetting input method
- SD card "switched" I think. Shows my external SD as internal (sdcard0)
- Trebuchet crashes (fc) but immediately restarts.
Also, this isn't a bug, but still informing that boot screen shows Samsung Galaxy Core GT-I8260 and not I8262
Anyways, excellent work on working CyanogenMod
Click to expand...
Click to collapse
Keyboard doesn't fc for me, works fine.
SD card is shown for ext card in default manager but in other file manager app it is normal.
Disclaimer
AS OF NOVEMBER 11, 2014: This project is now discontinued. Head on over to SpeedMod ROM (http://forum.xda-developers.com/showthread.php?t=2622857) to get Android 4.4.4 KitKat.
I will not be held responsible for bricked devices, bootloops, and other phone malfunctions, either within the ROM or its pre-installed apps. I will however, provide needed support to the fullest extent I can give.
Introduction
This ROM (Cyanogenmod 11 - Android 4.4.4 Kitkat) is built from source using kernels and sources from @TheWhisp, @Giugiu19 and @smartandroidtech. This is pure Cyangenmod 11, no apps taken away or added.
Screenshots
Coming soon
What's Working?
Samsung RIL (telephony, etc.)
Bluetooth
Mobile Data
Mounting of Internal and External SD Cards
Live Wallpapers
Everything else not mentioned below
What's Not Working?
WiFi
Camera
Camera Recording
Installation Instructions
Create a backup of your current phone setup via CWM or TWRP.
Wipe Data/Factory Reset, and Wipe Cache
Wipe your Dalvik Cache (for CWM, go to Advanced > Wipe Dalvik Cache)
Install the ROM ZIP
Reboot
NOTE: It is normal to have a long boot time for the first time it runs. After it has created the cache it needs, it will boot shorter the next time. Also, create a backup of your current phone setup in case something goes wrong.
Downloads
Cyanogenmod 11 Android 4.4.4 KitKat for GT-S7500 (Experimental Release #1): https://www.androidfilehost.com/?fid=95747613655049902
MD5: 78ca71ce97bbb547e610aaedc2438daa
Paranoid Android Google Apps: http://goo.gl/TLAA4v
(This is Google Apps pico version, roughly 37MB. If you want other choices, go to the original thread: http://forum.xda-developers.com/showthread.php?t=2397942)
Changelog
None so far
Credits
Soon
XDA:DevDB Information
Android 4.4.4 Kitkat (Cyanogenmod 11) for Samsung Galaxy Ace Plus, ROM for the Samsung Galaxy Ace Plus S7500
Contributors
Liam D., TheWhisp, Giugiu19, streambinder, kk9999gada
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 11.0
Beta Release Date: 2014-10-24
Created 2014-10-24
Last Updated 2014-11-11
Frequently Asked Questions
Q: Why is WiFi not working?
A: I am already aware that WiFi isn't working. It is a problem with ath6kl drivers, it does not assign the correct MAC address (bluetooth works fine however). I'm currently reviewing commits made by TheWhisp in his GitHub for his Cyanogenmod 11 version for tass (Galaxy Mini 2) which solves the issue. Please do NOT PM me about this, or report it as a bug, because it is being fixed at this moment.
EDIT: Temporary fix can be located here: http://forum.xda-developers.com/showpost.php?p=56263735&postcount=15 (thanks @kk9999gada)
Q: When will the next release be?
A: The next release will be released when it's ready. Do not ask for ETAs. When a commit has been updated in GitHub, it will be added in new releases. If you want to help out, report the bugs either in this thread or in GitHub.
Q: What about OTA updates?
A: I'm thinking of introducing OTA updates for this version, although it's a 50-50 chance that it will push through. It MAY happen in the future, we'll see.
Q: What do I do if I have questions?
A: Post them in this thread, do NOT PM me about them. I check this thread regularly.
Tips to Avoid Battery Drain
A. Modify Kernel Settings
To do that, go to Settings > About Phone and tap the "Build Number" seven (7) times. You will now see "Developer Options" and "Performance" options in your Settings app. Go back and tap "Performance" and tap on Processor, then tap on CPU governor. Select "Lionheart" and make sure "Set on boot" option is checked. You could also try reducing the minimum CPU frequency to 122 MHz, although it is not recommended. Go back, then tap I/O Scheduler and make sure that "DEADLINE" is selected (it should be by default), then make sure "Set on boot" is checked.
B. Use the pico version of Google Apps
In the original post, the link to download Google Apps is the link for the pico version (about 37MB). It does not include most of the bloat that Google adds to its devices (Chrome, YouTube, etc.). You can install these apps from the Play Store if you need them, and you don't need to install them if you don't want them.
Pure CyanogenMod... sooo cool
P.S.
I really want to use this ROM for daily purpose but I require wifi so all the best for fixing the bugs
Wow.. Cyanogenmod 11 Android 4.4.4 KitKat for GT-S7500, Thanks Developers :good:
Thanks everyone.
As for the WiFi issue, I'm not really sure if the problem is case-specific. To those who are willing to try it out in it's current, broken form, it would really help a lot if logcats were provided.
Thank you!
You want logcats for wifi ??
By the way theming engine works>?
Thats Awesome.!! We r eagerly waiting for WiFi n camera.
Androidoo said:
You want logcats for wifi ??
By the way theming engine works>?
Click to expand...
Click to collapse
Yeah, to make sure it's not only on my case. But those who are just willing to do so.
As for the theming engine, I haven't tested it yet 'cause there's no WiFi, I can't download themes to the phone. But theoretically, I'm 99% sure it works. I haven't modified anything related to Cyanogenmod anyway, so it should work as intended.
Liam D. said:
Yeah, to make sure it's not only on my case. But those who are just willing to do so.
As for the theming engine, I haven't tested it yet 'cause there's no WiFi, I can't download themes to the phone. But theoretically, I'm 99% sure it works. I haven't modified anything related to Cyanogenmod anyway, so it should work as intended.
Click to expand...
Click to collapse
i wil download it and try to give logcats for wifi
can't belive my eyes :laugh:
nice job man
pure cm11，I like it.looking forward a bug free cm11 for s7500
For me Wifi and theme engine working perfectly...
Sent from my GT-S7500 using XDA Free mobile app
karambir singh said:
For me Wifi and theme engine working perfectly...
Sent from my GT-S7500 using XDA Free mobile app
Click to expand...
Click to collapse
How is battery drain? Is it fast ?
when I dial the last phone number by speed dial，the number was covered like this：
CM 11 Bug Fixes
Not Working:
Camera (Problem with HAL, I think its kernel issue)
Camcorder
Offline Charging
All the web browsers have graphical glitch and are lagging
WiFi, Audio/Video Playback & YouTube HQ Fix
Download
(CWM/TWRP Flashable)
karambir singh said:
For me Wifi and theme engine working perfectly...
Sent from my GT-S7500 using XDA Free mobile app
Click to expand...
Click to collapse
How?? for me doesnt
kk9999gada said:
Not Working:
Camera (Problem with HAL, I think its kernel issue)
Camcorder
Offline Charging
WiFi, Audio/Video Playback & YouTube HQ Fix
Download
(CWM/TWRP Flashable)
Click to expand...
Click to collapse
wifi fix seems not work
WiFi is working for me perfectly without any issues. Try connecting to your router again.
kk9999gada said:
WiFi is working for me perfectly without any issues. Try connecting to your router again.
Click to expand...
Click to collapse
battery drain??
Androidoo said:
battery drain??
Click to expand...
Click to collapse
Same as SpeedMOD.
Aiming at fully working Omnirom on Sony Xperia M2 LTE
Notice: only support to D2303
XDA:DevDB Information
Omnirom 4.4.4 unofficial, ROM for the Sony Xperia M2
Contributors
erikcas, galaxyfreak, lozohcum
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: omnirom
Version Information
Status: Testing
Created 2014-10-25
Last Updated 2014-10-25
Requirements:
To flash rom you will need unlocked bootloader and you will have to install a CWM recovery first time you install custom.
Working:
Display
Audio playback
Audio recording
Video playback
Screenshot
External SDcard
Internal SDcard
WiFi
Bluetooth
Notification LED
MTP
Torch
Sensors
Mobile Connections (including LTE)
GPS
NFC
Recovery (reboot, when you see sony logo keep tapping to enter recovery)
To test (that is where you guys kick in!)
???
???
???
???
Kernel sources:
Github kernel repo
A note about recovery:
Reboot to recovery does not work yet. To enter recovery, reboot your device. When the sony logo appears, keep tapping till you enter recovery.
Adb is not working in recovery yet. So if you want to flash another rom from recovery, first transfer the new rom to your sd on your current rom.
Make sure you noticed:
Warranty might be void
I cannot be held responsible for any damage to your phone
Downloads:
omni-4.4.4-20150406-eagle_lte-EXPERIMENTAL
md5: 8839b95d5417c163d8061e02f341e776
Alternative boot.img for this rom above (might work on other M2 models)
===========================================
omni-5.0.2-20150125-eagle_lte-NIGHTLY.zip
md5 here
Lollipop preview
md5: 8b987f61b9482e15180814f24fd8a855
omni-4.4.4-20141115-eagle-NIGHTLY.zip
md5: e48c4da57ab4333a69d9688d9c057e23
omni-4.4.4-20141107-eagle-EXPERIMENTAL.zip
md5: aa044449998acc8d49075b949a3a043b
omni-4.4.4-20141029-eagle-NIGHTLY.zip
b08ed2ace6eef37e5daafa315eb210c6
gps fix
I'am waiting download links thanks
thank you...................
Thank you devs..................
Heck yes I've been waiting for a custom ROM for my Xperia since I had it in my hands c': You are my hero <3 :highfive:
ElIrvingsillo said:
Heck yes I've been waiting for a custom ROM for my Xperia since I had it in my hands c': You are my hero <3 :highfive:
Click to expand...
Click to collapse
Not "a custom ROM". It's OmniRom!
Probably the only one that could make me come back to 4.4. I had it on my V, it's the best for people who like a real slim and lightweight, yet fully functional and stabil environment.
I did not like 4.4 except of course the improved camera. Then no separate GPS switch, Google disabled browser text re-flow, etc ... no idea why they do that but I think that's a downslope.
OmniRom = up-slope.
Will it be flashable for D2306? (LTE, Single Sim, South America model). I think its just bands are different from D2303. Can anyone confirm that?
macabrocabral said:
Will it be flashable for D2306? (LTE, Single Sim, South America model). I think its just bands are different from D2303. Can anyone confirm that?
Click to expand...
Click to collapse
I made a thread in talk.sonymobile asking the same thing as you, and they told me the same, the basebands are differents. The software remains the same, 'cause there's no dfiference between LTE connection (I don't mean about basebands, just the connectivity), Dual Sim or no LTE.
Waiting for it
waited for mod to move the thread
will build it overnight and put a dl link tomorrow
It will probably be alpha as audio is not working yet
Yeeaar, thank you !
Xperia M2 get a new life !
erikcas said:
waited for mod to move the thread
will build it overnight and put a dl link tomorrow
It will probably be alpha as audio is not working yet
Click to expand...
Click to collapse
Hey, I've made a header for the post, use it if you want
Thanx
Dl link will appear in some hours. I will try to fix the audioproblem. Would be nice if it worked on first rom.
Verstuurd vanaf mijn GT-I9505 met Tapatalk
First post updated.
Download in second post.
Audio is working
Please read notes in first post!
erikcas said:
First post updated.
Download in second post.
Please read notes in first post!
Click to expand...
Click to collapse
Can you upload some screenshots?
Thanks, great work! [emoji106]
linuxct said:
[COLOR]
Can you upload some screenshots?
Thanks, great work! [emoji106]
Click to expand...
Click to collapse
will do tomorrow. Too tired now.
Note: GPS module is not in will make it available via flashable zip later tomorrow
erikcas said:
First post updated.
Download in second post.
Audio is working
Please read notes in first post!
Click to expand...
Click to collapse
brilliant
i cant download the link .. ..:crying::crying::crying::crying:
HTTP ERROR 404
Problem accessing /job/OMNICM/lastSuccessfulBuild/artifact/archive/omni-4.4.4-20141029-eagle-NIGHTLY.zip. Reason:
Not Found
budhiprasttt said:
i cant download the link .. ..:crying::crying::crying::crying:
HTTP ERROR 404
Problem accessing /job/OMNICM/lastSuccessfulBuild/artifact/archive/omni-4.4.4-20141029-eagle-NIGHTLY.zip. Reason:
Not Found
Click to expand...
Click to collapse
dumb copy paste error. Corrected. Download should work now
Also: added gps fix in second post.
Place on sdcard. In twrp recovery, install --> up a level --> external_sd (wait for it to mount) choose omni-gps.zip
if it does not mount, place file on internal storage and flash from there
Builds of Android Nougat for our beloved Nexus 7 2013.
This is, again, a fork of @DevSwift1's original AOSP port (http://forum.xda-developers.com/nexus-7-2013/orig-development/p-aosp-n-7-0-google-shame-t3448008), for totally different reasons. This time because he is MIA and it would be a good idea to update with the October Security Update and beyond.
What works:
Audio
Brightness
GPU Acceleration
Bluetooth
Wifi
NFC
GPS
Location services
Camera and video recording
Video playback
MTP
Sensors
Bugs:
- Play TV and Movies DRM broken (Wildvine)
- poor 1080p video recording quality.
- Can't install Play Games (through Play. May work through opengapps aroma if you pick just that and what is in micro. Maybe one or 2 others) It can be sideloaded.
Change Log:
v0.10.0.1 (Flo only, not applicable to Deb)
- Fixed GPS.
v0.10 (0.8.9999 was "0.9")
- 7.1.1_r4, including December Security Patches (except items in the kernel)
v0.8.999
- Partial Nov Security Update. (Everything but the kernel)
v0.8.1
- Fix for CVEs: 2016-5195, 2016-5340, 2016-7117, 2016-3903, 2016-3934
- That should address all of applicable kernel patches from the Oct Security Update plus Dirty Cow.
v0.8
- Update to 7.1.0_r4 complete, and apparently fine. (well, as good as 07.2)
Download:
Flo: 0.10.0.1
Deb: 0.10.0
Old just in case, since 0.10 is a big jump:
Flo: 0.8.9999
Deb: 0.8.9999
Gapps: http://opengapps.org (micro version recommended)
If you have trouble installing Gapps, try rebooting (right back into recovery, not system) between flashing the ROM and Gapps.
Micro is a bit more than just recommended. It is the largest package that will fit in the system partition. This is basically a universal issue with Nougat that can't really be worked around without very risky tweaks to mess with the partition sizes which I'm not even sure are actually possible. (not happening)
You can install smaller packages, or "larger" using a custom config or the Aroma installer. And only slightly "larger" there. That is more useful to pick and choose to find a balance that works for you. You won't fit much more. (I do that on my Moto E which has the same issue.)
Sources: https://github.com/nbehary/manifest (the n-mr1 branch is 0.8. and master is basically untouched and still 0.7.2. I'll make master v0.8 later. )
Kernel Sources: https://github.com/nbehary/android_kernel_google_msm
Credit
@zaclimon
@DevSwift1
Two development things to mention:
- right now I'm forking as little of msm8960 as I needed to to apply the security patch. Only platform_frameworks_base and platform_system_core in my repos are current. (platform_build_core may or may not be, but it more or less is and doesn't matter for 99% of anything) I had forked them all before, but the rest aren't up to date. If you'd like to submit pull requests to help in any other repo, msg me first and I'll fork it first. (This will change over time. The manifest is the best guide for which I've updated. If I'm using mine there, it is current)
- I did ignore one of @DevSwift1's commits in system/core, since it was just pulling in my fork of it. No point, except to keep the history intact, but I was lazy. They were the same.
(ETA: oh, 3. The kernel sources are also up to date, and more current than the one in msm8960, even though the commits are backwards. He never merged the CVE patch. )
Is it possible to dirty flash over DevSwift1's version?
jerethi said:
Is it possible to dirty flash over DevSwift1's version?
Click to expand...
Click to collapse
Probably. Sorry, forgot to mention that in the OP.
I know that dirty flashing the test version I posted in the other thread a few days ago over that works, and this over the test does. So, it should work fine.
We don't have to flash gapps again if we are updating from .6 do we?
Sent from my Nexus 7 using XDA-Developers mobile app
gangrenius said:
We don't have to flash gapps again if we are updating from .6 do we?
Sent from my Nexus 7 using XDA-Developers mobile app
Click to expand...
Click to collapse
You may. I always do, and didn't test without. My gut feeling is that you will need to. (I get mixed up though, the build I'm using on my Moto E always needs it, and I can't remember if here did too)
I know I don't when I flash an updated systemm of rr remix on my phone . hmmm guess we'll see
Sent from my Nexus 7 using XDA-Developers mobile app
---------- Post added at 06:01 AM ---------- Previous post was at 05:44 AM ----------
Can u add in that build prop edit they shared online into this so we can use google assistant?
Sent from my Nexus 7 using XDA-Developers mobile app
just in case i want to build using your trees and kernel sources, will it be a prebuilt kernel or from source?
simplyme2908 said:
just in case i want to build using your trees and kernel sources, will it be a prebuilt kernel or from source?
Click to expand...
Click to collapse
Prebuilt, but the one the manifest currently pulls, from my repos, is built from the sources posted here. It is entirely current. (despite the fact that I built it weeks ago.)
Is root lost after dirty flashing over 0.6?
Inviato dal mio Nexus 7 2013 (AOSP Nougat 7.0) con Tapatalk 6
jerethi said:
Is it possible to dirty flash over DevSwift1's version?
Click to expand...
Click to collapse
nbehary said:
Probably. Sorry, forgot to mention that in the OP.
I know that dirty flashing the test version I posted in the other thread a few days ago over that works, and this over the test does. So, it should work fine.
Click to expand...
Click to collapse
For me, dirty flashing this over DevSwift1's version works.
Thanks for keeping this tablet updated!
Thanks for continuing to update this rom
miki67 said:
Is root lost after dirty flashing over 0.6?
Inviato dal mio Nexus 7 2013 (AOSP Nougat 7.0) con Tapatalk 6
Click to expand...
Click to collapse
Yes, I have to root again.
With your build the video recording doesn't work at all in any camera app. See screenshot below of google camera
Please note I dirty flashed this on top of DevSwift1's version.
Has anyone installed EX on this? How does it perform?
@nbehary
What I've found not working so far
When I try to add my google account to Google Keep, the app force closes.
When trying to install Google Play Games from the Play Store I get the following error message (see image below).
Device is reported as Google Nexus 7 2012 model when logging in with your Google account.
Other than that ROM is stable and smooth! Love Android 7.0
Great work! :good:
Edit: Installed from scratch (clean install)
Does it matter which version I currently have ?
I'm doing this for the first time, using this tutorial - http://androiding.how/how-to-install-a-custom-rom-using-twrp-recovery/
I tried to install gapps together with ROM, but GAPPS shows: "Incompatible device detected"
I downloaded ARM64 GAPPS
ERROR:
Camera error: Can't connect to the camera.
And photo quality is also bad, very grainy..
rudolph323 said:
I tried to install gapps together with ROM, but GAPPS shows: "Incompatible device detected"
I downloaded ARM64 GAPPS
ERROR:
Camera error: Can't connect to the camera.
Click to expand...
Click to collapse
Don't use Arm64, Nexus 7 is 32-bit. So you want Opengapps 7.0 arm gapps
And yeah same camera issue, hopefully it gets fixed.
Otherwise good ROM.:good:
Is the webview patch applied?
http://opengapps.org/blog/post/2016/10/06/nougat-webview/
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Video recording (working but laggy if you want to watch it)
SELinux
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Changelog
Code:
[B]lineage-15.1-20180722-UNOFFICIAL-eagle.zip[/B]
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180707-UNOFFICIAL-eagle.zip[/B]
Fix low volume
Fix livedisplay
Fix kernel local version
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180624-UNOFFICIAL-eagle.zip[/B]
Initial release
Troubleshooting
Video recording
Video recording is broken in stock camera, just install
https://play.google.com/store/apps/details?id=com.simplemobiletools.camera
as workaround for now.
Playstore show not certified
Try to clean app data and cache first, if its not working for any reason read this
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Low RAM Configuration
Add the four lines into your build.prop with any rootexplorer you want, save it and restart your phone to activate them.
Code:
# Low memory device
ro.config.low_ram=true
# Force high-end graphics in low ram mode
persist.sys.force_highendgfx=true
If you need more information read this
https://source.android.com/devices/tech/perf/low-ram#intro
sgspluss said:
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Information
This are unofficial builds made by myself, will fix things, resync and rebuild it if i'll find some free time.
What's working
Mostly everything.
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Click to expand...
Click to collapse
did you fix some problems in this version?
i mean is there any different from the rom BETA 2?
and what abut laging? did you fix it?
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
sgspluss said:
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
Click to expand...
Click to collapse
great news..iam ready for start testing..i will report if i found somthing
hooooossamq said:
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.
Click to expand...
Click to collapse
snap is better because it uses newer drivers and open source (like the rom itself). and there is no point if you add sony camera because it is an AOSP rom, it meant to be pure android (except lineage tweaks)
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
hooooossamq said:
what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
Click to expand...
Click to collapse
Thats not that easy as you think, because need to port this app to the api, but apart of this i want to stay close as possible to lineage.
hooooossamq said:
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
Click to expand...
Click to collapse
Afaik there will be no odex files, if there are one i will change it in next update. To be honest, did not check it.
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Hrustus said:
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
Click to expand...
Click to collapse
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
hooooossamq said:
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Click to expand...
Click to collapse
Are they also present in builds befor?
Sent from my athene using XDA Labs
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Click to expand...
Click to collapse
Unfortunately no, but maybe somebody else remember version. Hmmm... Actually I am not sure that Magisc was working on LineageOS or on Ressurection ROM...
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Are they also present in builds befor?
Sent from my athene using XDA Labs
Click to expand...
Click to collapse
the lag is much more in your bulid..light bar was working in BEAT 2.
style day and night bug was present in BETA 2..
i was test ALPHA 4 before.every thing working of the bug i say before expact the light bar.and its the most smoth version.. its lagy.. but most smother than all
About problem with magisk, we are also unable to install the magisk manager will look into it whats the reason.
About lags and bugs its strange because i am using same sources, as you can read.
If Something not working logs are helpfull otherwise it takes more time to figure out whats wrong.
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Sent from my athene using XDA Labs
sgspluss said:
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Click to expand...
Click to collapse
and here goes my report (very early report, i will add more information)
1-) without gapps, there is some frame dropping in animations and recent apps section (with or without android go mode) but it is same as beta 2, but a bit slower than 8.0 versions. i wonder is there a huge change under the hood between two versions
2-) no lag present in bootanimation, that's unexpected
3-) front camera video works
4-) dark mode works just fine
summary: our device can't handle gapps, that's what i see here. there are minimal frame droppings. also rom is odexed sadly
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Sent from my athene using XDA Labs
sgspluss said:
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Click to expand...
Click to collapse
go optimization is better for our device for sure, but this recent apps lag holds me back. but without go and using microg, rom holds up pretty good actually.
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Sent from my athene using XDA Labs
sgspluss said:
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Click to expand...
Click to collapse
as i said before, i am using rom with low_ram=false, and there is less lag compared to go enabled mode.
hello
Me too "low_ram=false" make my m2 less laggy
Thank you for your work