Hey,
i had found a solution for this in the moto 4g forum:
Quote:
Originally Posted by swicago
I just update via CM downloader and it update fine, however again my Radios are gone.
I tried to following to recover them, but to no avail
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
I am going to try a full wipe and install
EDIT: After doing full wipe and fresh install, my radios were still gone.
Had to run the above fastboot commands after fresh install..... Would be nice if we didn't need to do this each time on a new version.
Click to expand...
Click to collapse
Can anybody help me with finding those "NON-HLOS.bin" " fsg.mbn" files ? Im am Noob.
Thanks!!
Search for radio firmware for your device model.
_that said:
Search for radio firmware for your device model.
Click to expand...
Click to collapse
Perfect thanks! i take "Lollipop Radio Firmware:"?
E: Ok worked thanks a lot!
Related
Hi all,
After flashng several recoveries and ROMs yesterday, my MOTO G 8GB XT1032 (GER) has no WiFi any more.
I can nor turn it on, even if I use the slider for that. After some seconds it goes to OFF again.
I have tried to flash stock 4.4.2 German retail. Rom works perfect, but no WiFi.
What can I do?
I think while flashing, I have overwritten some settings...
Please help a frustrated stupid from Germany....
Edit: What I did and what might be important:
In CWM Touch I formated all what is formatable. Also "none". I thought, that my new installation will be "cleaner".
Thank you all so much in advance!!!!
Maybe there is a ROM I can flash that brings WiFi back?
Is there a way to restore the phone to factory regarding the partitions and relevant files?
How did you flash 4.4.2?
Directly 4.4.2. Stock? Or first 4.3 and then update to 4.4.2?
If 4.4.2 then like this?
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
Click to expand...
Click to collapse
Maybe you can also read here.
Post 3
mokkami said:
How did you flash 4.4.2?
Directly 4.4.2. Stock? Or first 4.3 and then update to 4.4.2?
If 4.4.2 then like this?
Maybe you can also read here.
Post 3
Click to expand...
Click to collapse
Thank you.I will give that a try, too.
I flashed from 4.4.2 GPE to CM11 unofficial and back again.
Something during these steps went wrong...
In recovery I did some stupid formating and wifi was gone.
After my "cool action" I tried flashing nearly every ROM I cold get. No success...
If you really wanna thank me, then hit thanks
mokkami said:
How did you flash 4.4.2?
Directly 4.4.2. Stock? Or first 4.3 and then update to 4.4.2?
If 4.4.2 then like this?
Maybe you can also read here.
Post 3
Click to expand...
Click to collapse
Thanks a lot. The link with Post 3 fixed my the problem.
You are my hero of the day!!!
mokkami said:
If you really wanna thank me, then hit thanks
Click to expand...
Click to collapse
I did that!
Sir, geetings also from Germany. I will open a new thread for that. The solution is quite easy. Give me a short PM
JX
Who are you talking to?
Hi, i saw, that this issue is currently solved. Thanks
Hi I wanted to install CM on a friends phone. He wanted to buy a Moto G 2013 (falcon) but he did accidentally buy a Moto G LTE (peregrine). I just noticed that because I tried to flash recovery for falcon and it did not work at all. Then I opened the phone and discovered the sim card slot
Now I upgraded Bootloader to 411A and installed TWRP v2.7.1.0 and tried to flash CM 13. CM boots up, but it doesn't recognize sim or wifi Wifi-Mac is shown as 02:00:00:00:00:00 and baseband version is unknown. and model is shown as xt1039. Any suggestions? Tried all available CM nightly build (older ones are 404 for peregrine) and also the crdriod rom. Same problem with every rom. Full wipe of data and factory reset done
You have not updated the radio firmware. This is done via fastboot: (files are available here)
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
Thanks
lost101 said:
You have not updated the radio firmware. This is done via fastboot: (files are available here)
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
Worked on MOTO E 1st Gen with Radio published on XDA.
Can you please reply me with the steps?
sebajuez said:
Worked on MOTO E 1st Gen with Radio published on XDA.
Click to expand...
Click to collapse
Hi, even I've Moto E 1st Gen with CM 13 installed in it and having exactly the same issue with WiFi not working and MAC address showing as 02:00:00:00:00:00. Even I am not able to make or receive calls in my Moto E. I'd be really thankful if you mention the steps that you did to solve the problem.
MusaddiqueAli said:
Hi, even I've Moto E 1st Gen with CM 13 installed in it and having exactly the same issue with WiFi not working and MAC address showing as 02:00:00:00:00:00. Even I am not able to make or receive calls in my Moto E. I'd be really thankful if you mention the steps that you did to solve the problem.
Click to expand...
Click to collapse
Becasue I was also searching for that..
>> http://forum.xda-developers.com/showpost.php?p=67831671&postcount=71
Used Radios listed here: http://forum.xda-developers.com/moto...p-rom-t3167111
There are for Lollipop but works fine on CM13 (nightly CONDOR 7/20/2016).
To flash radio as described here:
http://forum.xda-developers.com/show....php?t=2759495
For flashing radio only, use this commands
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
Thanks a lot for the info bro
I was stuck with my mom's mobile for a couple of days. And your post helped my solved it. Radio now works cool!
Thanks a lot
lost101 said:
You have not updated the radio firmware. This is done via fastboot: (files are available here)
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
Hello. I'm facing the fallowing issue. I was updating over OTA to 7.1.1 , everything went ok. But after booting the phone had no wifi or bluetooth connectivity MAC Adress 02:00:00:00:00:00. Does the file provided here will work on my device?. Mobile connectivity if fine, but no Wifi or Bluetooth, connection is possible. I'll apreciate any help, if it is possible.
Here some screen shots. Thank you.
https://prntscr.com/jm89bm
https://prntscr.com/jm89bi
https://prntscr.com/jm895v
The device model is XT1650-03. A Moto Z.
Official zipped Nougat Stock firmware
https://mega.nz/#!ystC2ZSL!ql6cyC5v5RgLQfo7G44mhi7Ng-AQBvtsouKxKinbHi8
SHA-1 - 166d88ce734298dd40c1dbd7afbdac3c773a72ac
MD5 - b870c67a8020d314df3874c140606de4
CRC32 - cdfd2e36
Flash via fastboot.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
Do it manually or with .bat in attachement (archived because of file ending)
Can I relock the bootloader, after flashing this firmware?
Pain00556 said:
Can I relock the bootloader, after flashing this firmware?
Click to expand...
Click to collapse
Yes, if you prefer.
Does anyone tried it on indian xt1643
can you upload it in androidfilehost or google drive or upload( modem NON-HLOS.bin ) from firmware zip please
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Prabhat00 said:
Does anyone tried it on indian xt1643
Click to expand...
Click to collapse
i myself tested its working fine
syedhmed said:
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Click to expand...
Click to collapse
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
D1AMONDH3AD said:
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
Click to expand...
Click to collapse
Yes...!
I tried it with my Indian Variant XT1643 and working well, locked bootloader as well, this is Official Full Stock Nougat 7.0 Rom NPJ25.93-11 With November Patch
No doubt you can try it guys ..
---------- Post added at 01:03 AM ---------- Previous post was at 01:00 AM ----------
Gimme some time guys, ZIP uploading in WeTransfer and Google Drive as well
Has anyone tried this with the XT1644
i tried downloading more than 6 times daam it failed everytime at 2.41gb i am done , can someone upload it to google drive
jerpd3rp said:
Has anyone tried this with the XT1644
Click to expand...
Click to collapse
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
***Deleted***
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
This ROM works on xt1626 model brazilian with digital TV?
Sunny020 said:
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Click to expand...
Click to collapse
Extract firmware in fastboot folder, then use SHIFT + RCLICK there (Open new command prompt) and insert commands in post #1 one by one
is it possible to put forth the command to erase userdata? so the flashing is done after wiping the phone
Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
ice711 said:
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
Click to expand...
Click to collapse
It shows RETUS. No issues so far besides the notification sounds being low some times.
Flashed on my XT1644 g4plus on Verizon in the US yesterday.
So far, I have no issues to report. Seems to work fine. It does seem the battery drains faster, but I am likely just using it more looking for new stuff...
I do miss my ad blocker, though. Hopefully it'll be rooted soon, otherwise I may try a custom ROM just to keep these dang ads away...
Sent from my Moto G (4) using Tapatalk
Im in trouble kindly help me share radio flashable kernel for moto g 3rd gen xt1548 8gb? or any thing that helps ..After i flashed stock version my sim is not activating i tried different roms too but no luck.
i also tried this code *#*#4636#*#* and try to select gsm only but no luck. im not getting gsm/wcdma option as well
i have search many forums and googled lot but i found no solution for this , kindly help ? :crying: :crying: @lost101
Try the following in fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
lost101 said:
Try the following in fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
@lost101 Sir can you share files or i can relfash files from this firmware "XT1548_OSPREY_SPRINT_6.0.1_MCIS24.107-82-18_cid9_subsidy-DEFAULT_CFC.xml" ?
ameer.qaan said:
@lost101 Sir can you share files or i can relfash files from this firmware "XT1548_OSPREY_SPRINT_6.0.1_MCIS24.107-82-18_cid9_subsidy-DEFAULT_CFC.xml" ?
Click to expand...
Click to collapse
Sir problem solved i flashed with stock firmware name " osprey_retasia-stable_7.1.1_NPD26.35_3.zip" via twrp and its worked phone is now working fine
Problem
I am running lineage nightlies on my Moto G 2015 (XT1541 with 2GB) since several month. Since some weeks i get "Unknown baseband" if i flash a current nightly.
Question
Is that a known issue? How can i workaround that?
Should i flash back to the latest Factory Firmware Images (from here: https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639) and then try reinstalling Lineage?
dddufte said:
Problem
I am running lineage nightlies on my Moto G 2015 (XT1541 with 2GB) since several month. Since some weeks i get "Unknown baseband" if i flash a current nightly.
Question
Is that a known issue? How can i workaround that?
Should i flash back to the latest Factory Firmware Images (from here: https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639) and then try reinstalling Lineage?
Click to expand...
Click to collapse
You can reflash the radio firmware, that should fix the unknown baseband error.Here is the link to the guide, it's in the FAQ:
How to flash Radio Firmware only?
Use the following fastboot commands:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
Broadcasted from Zeta Reticuli
Gravemind2015 said:
You can reflash the radio firmware, that should fix the unknown baseband error.Here is the link to the guide, it's in the FAQ:
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
Let's see if i understood:
- Download & extract firmware for XT1541 here https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
- Install fastbook on my linux host ( i would prefer using my package mananger pacman)
- Reboot phone to Bootloader mode
- Execute the following fastbook commands
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1*
fastboot erase modemst2*
fastboot flash fsg fsg.mbn
- Reboot phone
I hope thats correct so far.
As i am interested: why is that baseband now outdated or not longer supported for current lineage nightlies? And how can i be sure that the ones contained in the firmware archive are newer?
dddufte said:
Let's see if i understood:
- Download & extract firmware for XT1541 here https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
- Install fastbook on my linux host ( i would prefer using my package mananger pacman)
- Reboot phone to Bootloader mode
- Execute the following fastbook commands
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1*
fastboot erase modemst2*
fastboot flash fsg fsg.mbn
- Reboot phone
I hope thats correct so far.
As i am interested: why is that baseband now outdated or not longer supported for current lineage nightlies? And how can i be sure that the ones contained in the firmware archive are newer?
Click to expand...
Click to collapse
Sorry, there was a typo. Instead of modemst1*, it would be modemst1, same for modemst2
So the resulting set of commands would be:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
.
As for the rest of the procedure, it's fine, I am a mint and arch user
Maybe the firmware isn't outdated but 'corrupted' in some way. Newer firmware doesn't always include core-level changes, so there is a chance that the firmware being flashed is the same version. The bootloader screen does show some info, but I'm not sure
Broadcasted from Zeta Reticuli