Posted this in page two of another thread but just wanted to make sure people saw this in case they didnt read it before they purchased the Surface case with the kickstand. Gonna call them tomorrow to make them aware:
I ordered my Surface case, received it today and I'm having issues. When the bottom piece of the outer shell slides on the screen goes dark. Cannot turn it back on. If I slide off the bottom piece it comes on, when it slides back on it puts the screen back to sleep. If i take a stand alone magnet and put it up to the back of the phone where the kick stand would be it turns off. Thinking there is a design flaw. Gonna call Seidio tomorrow. Kinda sucks I've been waiting for their holster for a while now.
Edit: Definitley a design flaw, I found this on Google's Nexus 6P help forum:
"I have found there is a magnetic sensor in the Nexus 6P to detect when the folio case cover has been closed so as to lock and turn off the screen of the phone. The sensor is located in the bottom left corner when looking at the front of the 6P. I found that this sensor also reacts to a magnetic field applied to the back side of the Nexus 6P in this same area (bottom right corner when looking at the back of the 6P). Herein lies the problem... When trying to use Android Beam through NFC by holding the back of the 6P to the back of another device, a magnetic field from the other device (the speaker perhaps) can trigger the magnetic sensor in the Nexus 6P, causing the Nexus 6P to lock and go to sleep before the NFC sensors have aligned. Both my OnePlus One and my Neuxs 7 2013 will put my Nexus 6P to sleep if I don't hold them carefully enough when trying to align the NFC sensors. Can anyone else confirm this? Why does this sensor also pick up magnetic fields on the back of the phone? Is there a way to disable the magnetic sensor if not using a folio case so this does not happen when trying to use Android Beam?"
That's a big problem..
Could you please post some pics of the phone with the case?
Thanks!
Sent from my Nexus 6P using Tapatalk
I'll have to see if mine suffers the same issue when it arrives. I have 2 Nexus 6P's to test it on, so that should provide a little better sample size.
Ronbo19 said:
Posted this in page two of another thread but just wanted to make sure people saw this in case they didnt read it before they purchased the Surface case with the kickstand. Gonna call them tomorrow to make them aware:
I ordered my Surface case, received it today and I'm having issues. When the bottom piece of the outer shell slides on the screen goes dark. Cannot turn it back on. If I slide off the bottom piece it comes on, when it slides back on it puts the screen back to sleep. If i take a stand alone magnet and put it up to the back of the phone where the kick stand would be it turns off. Thinking there is a design flaw. Gonna call Seidio tomorrow. Kinda sucks I've been waiting for their holster for a while now.
Edit: Definitley a design flaw, I found this on Google's Nexus 6P help forum:
"I have found there is a magnetic sensor in the Nexus 6P to detect when the folio case cover has been closed so as to lock and turn off the screen of the phone. The sensor is located in the bottom left corner when looking at the front of the 6P. I found that this sensor also reacts to a magnetic field applied to the back side of the Nexus 6P in this same area (bottom right corner when looking at the back of the 6P). Herein lies the problem... When trying to use Android Beam through NFC by holding the back of the 6P to the back of another device, a magnetic field from the other device (the speaker perhaps) can trigger the magnetic sensor in the Nexus 6P, causing the Nexus 6P to lock and go to sleep before the NFC sensors have aligned. Both my OnePlus One and my Neuxs 7 2013 will put my Nexus 6P to sleep if I don't hold them carefully enough when trying to align the NFC sensors. Can anyone else confirm this? Why does this sensor also pick up magnetic fields on the back of the phone? Is there a way to disable the magnetic sensor if not using a folio case so this does not happen when trying to use Android Beam?"
Click to expand...
Click to collapse
Bummer! I was really looking forward to this case. Maybe they will release one without the kickstand (doubtful).
jal3223 said:
Bummer! I was really looking forward to this case. Maybe they will release one without the kickstand (doubtful).
Click to expand...
Click to collapse
Going to call them in the morning. I'll post the response I get.
I also REALLY want the Surface case, but I'm holding off until more people receive theirs and post whether they experience the same thing. I've had a Surface case on all my phones for several years. It's the slimmest I've found, gives the best protection, and the kickstand doesn't add much bulk. Can't tell you how many times I've dropped my phone and never had a problem.
Pig Vomit said:
I also REALLY want the Surface case, but I'm holding off until more people receive theirs and post whether they experience the same thing. I've had a Surface case on all my phones for several years. It's the slimmest I've found, gives the best protection, and the kickstand doesn't add much bulk. Can't tell you how many times I've dropped my phone and never had a problem.
Click to expand...
Click to collapse
Agreed. Some of the best cases I've ever used on my phones.
Spoke to them this morning and explained the issue. They created an RMA and are going to ship out a modified version, I'm assuming without the kickstand. I was told not to worry about sending back the old case so I'm gonna see if there is a way to get the kickstand out in the meantime without destroying the bottom half.
My Sedio case is arriving today (earlier than expected), so I will post a review in my case OP. If the issue is present on either of my 6P's I will let everyone know.
Ronbo19 said:
Spoke to them this morning and explained the issue. They created an RMA and are going to ship out a modified version, I'm assuming without the kickstand. I was told not to worry about sending back the old case so I'm gonna see if there is a way to get the kickstand out in the meantime without destroying the bottom half.
Click to expand...
Click to collapse
I would actually prefer the case w/o the kickstand. I don't like the bump it creates. So hopefully they will release the case w/o it.
Thanks again for the update!
Pilz said:
My Sedio case is arriving today (earlier than expected), so I will post a review in my case OP. If the issue is present on either of my 6P's I will let everyone know.
Click to expand...
Click to collapse
Great, curious to see if you run into the same issue.
Dror520 said:
I would actually prefer the case w/o the kickstand. I don't like the bump it creates. So hopefully they will release the case w/o it.
Thanks again for the update!
Click to expand...
Click to collapse
No problem. I agree, don't think I've ever used the kickstand but really like the protection the case offers and their holster.
Ronbo19 said:
Great, curious to see if you run into the same issue.
No problem. I agree, don't think I've ever used the kickstand but really like the protection the case offers and their holster.
Click to expand...
Click to collapse
Mine doesn't have that issue at all. I'm using the case now, and I will post my review later today. I'm not that impressed with the way Sedio did their button cutouts, but more on that later.
Edit: It seems that the bottom piece on my case wasn't pushed up completely becasue when I removed the case and put it back on the screen kept shutting off/staying off depending on how I installed it.
I received the case yesterday and also immediately noticed the problem. I called they are also sending me a replacement.
Meanwhile, I popped out the kickstand and turned it around and it seems ok for now. with it flipped around, you can't get your nail in to open the kick stand so its essentially useless.
Its really unfortunate that they didn't catch this design bug before shipping.
(I will say, this case makes the 6P feel really thick - I'm trying to decide if I like it or not)
richardyoo said:
I received the case yesterday and also immediately noticed the problem. I called they are also sending me a replacement.
Meanwhile, I popped out the kickstand and turned it around and it seems ok for now. with it flipped around, you can't get your nail in to open the kick stand so its essentially useless.)
Click to expand...
Click to collapse
Out of curiosity how did you do that. I've been trying to figure out how to accomplish that.
I called sedio because my case bows outward on one side where the two pieces connect, but they refused to help me because I order from their Amazon store. Their customer service is horrendous, and the agent (Shane) I spoke with was rude about anything I asked. I'm disappointed with their service, and case so far. I plan on sending it back immediately because of how they handled a simple question.
Edit: I finally spoke with a manager, and after having her repeat the same thing a few dozen times (in between no letting me say anything) they are sending me a replacement. I can't say I've encountered a CSR this bad in a long time, so I will try to ignore their rude representatives and use the case.
Ronbo19 said:
Out of curiosity how did you do that. I've been trying to figure out how to accomplish that.
Click to expand...
Click to collapse
The stand is just held in place by the black tape... you can see the black tape on the inside of the case. So you just gently push on the silver metal stand out the back - it should slowly release... it takes a little finesse but it's not terribly difficult.
Then once it's out, all you need to do is flip it around and stick it back in place...
Although the stand isn't accessible in this new orientation, at least, the case will work without turning the phone off.
I have the same issue with the screen turning off when the bottom part is slid on. Called them up and they're are sending a new modified version. They better send it 2nd day express which I paid extra for!
richardyoo said:
I received the case yesterday and also immediately noticed the problem. I called they are also sending me a replacement.
Meanwhile, I popped out the kickstand and turned it around and it seems ok for now. with it flipped around, you can't get your nail in to open the kick stand so its essentially useless.
Its really unfortunate that they didn't catch this design bug before shipping.
(I will say, this case makes the 6P feel really thick - I'm trying to decide if I like it or not)
Click to expand...
Click to collapse
Can you post any pics? My biggest concern (once they iron out this magnetic closing issue) is the thickness. I have the Spigen Rugged Armour and love the sleekness, but I'd like a kickstand since I often watch stuff on my phone. Any more comments regarding the thickness and pictures would be great!
ajizle123 said:
Can you post any pics? My biggest concern (once they iron out this magnetic closing issue) is the thickness. I have the Spigen Rugged Armour and love the sleekness, but I'd like a kickstand since I often watch stuff on my phone. Any more comments regarding the thickness and pictures would be great!
Click to expand...
Click to collapse
You can see my review of the case and pictures right here
The holster seems to be a bit spooky how it is designed. The phone hovers about an 1/8" above the surface from about midway up the holster to the top clamp. There is an 1/8" lip where the phone is placed on at the bottom of the holster where it rests. Maybe I'm being overly cautious here but it seems the phone could be bent over time if inserted enough times because of that extra space beneath the phone. .
Related
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Im really liking the wake and sleep feature on the Galaxy Note 8. This is a nice feature found on the iPad Mini and the Kindle Fire HD tablets.
http://youtu.be/3A8rtSead0I
http://www.youtube.com/watch?v=3A8rtSead0I&feature=youtube_gdata_player
Sent from my GT-N5110 using Tapatalk 2
Got the book cover case and really like the sleep and wake feature of it
To anyone who picked one up, how does it feel in terms of bulk? Also, when the cover is folded over, does it lay flush with the spine or does the flap stick out?
Juvenall said:
To anyone who picked one up, how does it feel in terms of bulk? Also, when the cover is folded over, does it lay flush with the spine or does the flap stick out?
Click to expand...
Click to collapse
It is very thin, as thin as my nexus 4, and feels like a father compared to my original xoom
the cover is just like the s3 flip cover but it snaps on the back instead of replacing the battery cover
and it triggers auto on and off like the ipad smart cover
Caved in and picked up the cover on the way home today. Some initial thoughts:
1) The case adds no real bulk to the device itself. The backplate and the screen flap are both super thin, so even when folded over, it's doable for someone like me who hates cases.
2) Because its all so thin, however, it does feel sorta cheap. If this suffers from the same build issues I've read the S3 version has, I don't have high hopes that it's going to last long.
3) The screen on/off thing is awesome. The sensor part of this is actually along the spine, not the edge of the flap. Not a complaint, just an observation.
4) When folded over, there is a bit of a "lip" around the spine. I can't say I love this, but it doesn't really impact the way I hold the device.
5) The "stand" feature is alright and seems stable enough as long as you use it in the single position it was designed for. I do with it had a few more angle options.
Verdict? Meh. It's not a bad case, and I don't intend to return mine, but had I been given the opportunity to play with one before, I don't think I would have spent the extra $50. At half that price, it wouldn't change my opinion, but I'd be far less disappointed.
I have the book cover for my 8.0 and it is not very heavy, acts like a stand and turns the Note on and off when I open and close it. Very convenient. Got mine on Amazon for $5.99. Thought I would give it a try for that amount . So far very happy with it.
rfb813 said:
I have the book cover for my 8.0 and it is not very heavy, acts like a stand and turns the Note on and off when I open and close it. Very convenient. Got mine on Amazon for $5.99. Thought I would give it a try for that amount . So far very happy with it.
Click to expand...
Click to collapse
The only one I see on Amazon for that price is the IVSO version. What I hate about those cases is how you actually have to put the tablet inside and wraps around the front. The official book cover simply snaps onto the back of the Note 8.
Juvenall said:
The only one I see on Amazon for that price is the IVSO version. What I hate about those cases is how you actually have to put the tablet inside and wraps around the front. The official book cover simply snaps onto the back of the Note 8.
Click to expand...
Click to collapse
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
rfb813 said:
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Ahh, right on. Same sort of issue for me with the case covering the bezel, but you should post up a quick review thread and a couple of pictures.
rfb813 said:
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I bought that same cover and also bought a similar one:
http://www.amazon.com/Dealgadgets-S...&qid=1366425979&sr=8-2&keywords=Galaxy+note+8
They both look essentially the same and add about the same bulk.
Major difference is that the Moko cover has auto wake, soft inside material, hand holder, and the pen holder doesn't interfere with IR. But it reeks! I mean it smells so bad I couldn't keep it in the same room with me. I left it outside overnight and it is still off gassing.
The Dealgadget cover has no weird smell. But also no wake function, no softer inside material, no hand holder. The pen holder is in a better location except if you plan to use the IR function. It is on the side of the tablet and I found it interferes with the IR.
So I ended up ordering the Samsung cover from this site. Since its coming from Hong Kong it will probably take a couple of weeks to get it. But I can't justify spending $50 for a cover. (Even though I probably will have spent close to $50 before I find one I like).
http://dx-box.com/catalogsearch/result/index/?cat=364&q=Galaxy+Note+8.0
I never purchased from this site before so I can't vouch for them yet.
I also have the upcoming Poetic case on order since its only $5. But it's not due to ship till May.
good one
hi budy go to your level best and may astonished to the forums:good:
When looking for some case reviews I stumbled over http://galaxynote8cases.com/ and they actually seem to have some good reviews. The only thing that is a real pain with the Note 8 is that it's tough to find any accessories for it.
I just got the white book case cover, its perfect for people who are careful with their electronics but like that extra layer to prevent scratches. Adds virtually zero weight.
tweak. said:
I just got the white book case cover, its perfect for people who are careful with their electronics but like that extra layer to prevent scratches. Adds virtually zero weight.
Click to expand...
Click to collapse
Thats the big selling point for me here. The absolute lack of bulk on this is awesome. I only wish this had two more features:
1) A magnetic hold when the front flap is covering the screen.
2) Another magnetic hold for the flap when its folded over the back.
Sent from my GT-N5110 using xda premium
There is a slight hold on the front side, as to not make it appear flimsy. When you flip it around back it "gives" a bit easier to fit snugly. Hard to explain, but clearly well designed.
Where are people buying this case, i cant find it anywhere.
The Book Cover Case is available in the US at local Best Buy, Staples and Office Depot. The only color is white, but the other colors will be available shortly.
Sent from my GT-N5110 using Tapatalk 2
theraker007 said:
Where are people buying this case, i cant find it anywhere.
Click to expand...
Click to collapse
got mine at best buy, it was the only one left in stock.
My Best Buy had black & white to choose from.
tweak. said:
My Best Buy had black & white to choose from.
Click to expand...
Click to collapse
wish i could have gotten black. i have friends that have the white cover on their sIII's and they get very dirty here in egypt, but i had to get something and white was the only choice.
Samsung Galaxy Note 8.0 Case
Where did you buy yours?
Sent from my HTC One using Tapatalk 2
little rant...
What really annoys me about this and many cases is the lack of thought around the camera on the back. They leave a slot for it on the back peice of the case which is great, but when you open it up to actually take a photo, you need to hold the case like an open book as there isnt a slot on the front peice. I dont intend on using the camera much but having to hold the front flap out of the way of the lens while trying to get composition, focus and release the shutter is a pain in the bum! If I could flip the front all the way round to the back and hold it flush with the back, that would be far more convenient.
hertsjoatmon said:
little rant...
What really annoys me about this and many cases is the lack of thought around the camera on the back. They leave a slot for it on the back peice of the case which is great, but when you open it up to actually take a photo, you need to hold the case like an open book as there isnt a slot on the front peice. I dont intend on using the camera much but having to hold the front flap out of the way of the lens while trying to get composition, focus and release the shutter is a pain in the bum! If I could flip the front all the way round to the back and hold it flush with the back, that would be far more convenient.
Click to expand...
Click to collapse
+1!
What also bothers me a little is the slit in the front flap of the case... for US owners, it looks like a mistake since we don't have that speaker there. Other than that, very happy with the quality, low profile and details - rubber footings for landscape upright position, magnet to hold front flap as prop in "keyboard" mode. A little expensive but I did the round about with case buying with the tab 10.1 and ultimately liked the official book case most.
Cases are available at BestBuy and B&H.
Picked one up at Best Buy last night. Absolutely prefer this over the Moko i just got. Only thing missing compared to other cases is a loop for a larger stylus and it's not heavy enough where it needs a handstrap.
I don't care about a camera hole on the front flap (to take pictures when the flap is folded over) as rear camera on this is more vestigial to my tablet use.
I do have issues with trying to stand it up the tall way with the cover - it sometimes wont hold the stand form and flips the tablet down.
This may get easier as it breaks in. There is no clasp magnetic or otherwise that holds the screen cover closed so it will fly open at times.
The tablet is protected on 3 corners (except the one that holds the stylus, obviously), completely covers the plastic back except for camera hole and front flap is thin but should protect the screen well enough in a bag. I like the clean design and it does raise the "premium" feel of the tablet in hand by covering up all the plastic.
I think if you care about adding the least bulk to the unit while still having a means of protecting it a bit, I think it does well.
BTW, if you had the 7.7 and the OEM cover for that, this cover is almost exactly like it - except this front flap is even thinner than the one on that one and can fold to help it stand. The 7.7 form fitting case that Samsung made could only stand by reversing the case flap and it would always fall over.
I bought it from Best Buy as well, it's not my first choice of cases, but it's probably the best out there now. Just too expensive, but I need protection for this unit. I'm hoping Seidio makes a case but I don't think this tablet will sell that well. I hope I'm wrong but it's fairly expensive. I think it is worth it but I have terrible judgment and love electronics.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2
Just curious, what colors are people getting? I picked up a white one at BB, but thinking about exchanging it for the black...
Every portable device I've owned since my first Walkman, with the exception of my 3rd gen iPod in 2004, has been black, so the white device and matching white case is a welcome change for me.
Sent from my GT-N5110 using xda premium
I couldn't take it anymore and exchanged for the black, lol. The all-white look was burning my eyes.
Picked this up today and it's going back. I do like how thin it is, but I notice the cover has a habit of bowing just enough to wake up the tablet and it's just close enough that it keeps waking it up. Case would be fine without the sleep/wake feature. Anyone know of a good knockoff without the magnet?
Sent from my GT-N5110 using Tapatalk 2
ExploreMN said:
Case would be fine without the sleep/wake feature. Anyone know of a good knockoff without the magnet?
Click to expand...
Click to collapse
You might like the STM Cape. It is a bit different, but appears to be very good quality, and it is less expensive and fairly light weight (judging by specs as I don't have one yet):
http://forum.xda-developers.com/showthread.php?t=2251888
I asked them and they confirmed it does not come with a magnet for wake/sleep. Personally that has disappointed me, but you provide a good example of where it can be a good thing to not have wake/sleep.
I've asked STM a few more questions that I'm waiting to hear back on, including what kind of padding is embedded in the front cover. Something that has concerned me about the official Samsung Book Cover is that the front cover seems so thin that I wonder how much protection it would really provide (particularly from any impact). The STM Cape appears to have some kind of stiff material (padding?) in between the outer layer and the soft inner lining. I'll post in the Cape thread whenever I hear back about that.
pluginalong said:
You might like the STM Cape. It is a bit different, but appears to be very good quality, and it is less expensive and fairly light weight (judging by specs as I don't have one yet):
http://forum.xda-developers.com/showthread.php?t=2251888
I asked them and they confirmed it does not come with a magnet for wake/sleep. Personally that has disappointed me, but you provide a good example of where it can be a good thing to not have wake/sleep.
I've asked STM a few more questions that I'm waiting to hear back on, including what kind of padding is embedded in the front cover. Something that has concerned me about the official Samsung Book Cover is that the front cover seems so thin that I wonder how much protection it would really provide (particularly from any impact). The STM Cape appears to have some kind of stiff material (padding?) in between the outer layer and the soft inner lining. I'll post in the Cape thread whenever I hear back about that.
Click to expand...
Click to collapse
Thanks, I'll check it out. I don't mind thin. I never do anything that would damage a device like a phone or tablet anyway. Mostly I just want it for scratch protection since it could slide around in my briefcase and what-not.
I'm ordering this case from ebay. Looks more stable then samsung case.
KLD-Smart-Wake-UP-Flip-PU-Leather-Case-Cover-Samsung-Galaxy-Note-8-0-N5100-N5110
Sent from my GT-N5100 using Tapatalk 2
scopidoo said:
I'm ordering this case from ebay. Looks more stable then samsung case. KLD-Smart-Wake-UP-Flip-PU-Leather-Case-Cover-Samsung-Galaxy-Note-8-0-N5100-N5110
Click to expand...
Click to collapse
If you haven't already ordered I'd recommend having a look at the following thread that was a bit negative about the KLD:
http://forum.xda-developers.com/showthread.php?t=2251300
The MoKo Ultra Slim Lightweight Smart-shell Stand Case mentioned in that same thread sounds more promising (in my opinion).
I have just ordered this one from ebay:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121107475861
(I cannot post links yet, you'll need to copy and paste in your web browser)
It is cheap and looks slim and similar to the KLD one and it has a magnetic tab to keep it securely closed.
According to the description it supports "auto sleep and wake up when close and open" but I am not sure if I believe it. I can always open a dispute if it is not true
pluginalong said:
If you haven't already ordered I'd recommend having a look at the following thread that was a bit negative about the KLD:
http://forum.xda-developers.com/showthread.php?t=2251300
The MoKo Ultra Slim Lightweight Smart-shell Stand Case mentioned in that same thread sounds more promising (in my opinion).
Click to expand...
Click to collapse
This does look like a winner. Not extremely please about the Samsung case, regarding the inability to stand it up or keep the flap closed.
If you ordered this let us know how it goes.
OneMoreBrick said:
This does look like a winner. Not extremely please about the Samsung case, regarding the inability to stand it up or keep the flap closed.
If you ordered this let us know how it goes.
Click to expand...
Click to collapse
Here's a helpful review:
http://forum.xda-developers.com/showthread.php?t=2270264
Anybody try the IVSO bluetooth keyboard cover?
http://www.amazon.com/Bluetooth-Key...&keywords=galaxy+note+8.0+keyboard+case+cover
drexappeal said:
Anybody try the IVSO bluetooth keyboard cover?
http://www.amazon.com/Bluetooth-Key...&keywords=galaxy+note+8.0+keyboard+case+cover
Click to expand...
Click to collapse
I have not, but that is an intriguing product. I wonder if you might get a sense of the quality by looking at the reviews for the below version which I would guess uses the same keyboard (but with a different enclosure)?
http://www.amazon.com/Samsung-Galaxy-Bluetooth-Keyboard-Portfolio/dp/B00BH1HI4M/ref=pd_sim_sbs_e_1
pluginalong said:
I have not, but that is an intriguing product. I wonder if you might get a sense of the quality by looking at the reviews for the below version which I would guess uses the same keyboard (but with a different enclosure)?
http://www.amazon.com/Samsung-Galaxy-Bluetooth-Keyboard-Portfolio/dp/B00BH1HI4M/ref=pd_sim_sbs_e_1
Click to expand...
Click to collapse
I read some reviews on the Note 10.1 version and they are mixed:
http://www.amazon.com/Wireless-Blue...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
I'll just keep it in consideration, unless someone on the forums actually purchases and tries it out.
I received the KLD case off ebay not too long ago. The case came about a week after I placed an order (this includes weekend days). So first things first, the case is well made. I remember someone had expressed that the back stitching may be of concern but I looked at it and it looks like it will hold up just fine with moderate use.
I mentioned in my other review thread that this case is a major disappointment. The reason being is because I bought the case thinking it would have the auto wake/sleep feature. This case does NOT support this feature. Because of the lack of magnets in this case, it leads to a second major disappointment. The cover even when closed will flap around if you were to have it in your bag.
Because it is PU leather, it does smell VERY plastic like.
Finally, I chose to have the white option, if you take a look at the link, you will see that its a very pure white color. However, the cover I received is beige NOT white at all.
In conclusion, do I like this case? No, not at all. I can't recommend it to anyone. This is a cheaper alternative to the Samsung Book Cover (though I don't know if the official book cover supports the wake/sleep feature).
Pros
-Slim
-Nice cut outs (look at pics below)
-Not too expensive- I paid only $16.50 (free shipping)
Cons
-Does NOT have wake/sleep feature
-Cover does NOT stay in place because of the lack of magnets
-Bad smell even after leaving it in the open for 3 days
-The case I bought is WHITE, this case is clearly BEIGE
I give the case a 4/10. The quality is great but the lack of features that many other cases have for a cheaper price hampers it's overall rating.
Finally my search for a perfect slim case isn't over- I bought yet another case from Moko- that looks great. I'll post up yet another review when it's out. Check it out here! :
http://www.amazon.com/gp/product/B00C8T7I7Y/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Update in Post #18- 3 New Pics to show how it is after a week of use.
Thanks for sharing this great review! It is too bad the KDL wasn't very good after all. And I'm surprised it did not support wake/sleep.
JokeZony0u said:
Finally my search for a perfect slim case isn't over- I bought yet another case from Moko- that looks great. I'll post up yet another review when it's out.
Click to expand...
Click to collapse
That does look really promising! It clearly has a magnetic closure and uses magnets to hold the stand in place. And I like the broad assortment of colors.
A few other observations (about the MoKo Ultra Slim Lightweight Smart-shell Stand Case), just from looking at the pics, etc. on Amazon:
It appears that the shell is a bit thicker than other cases I've considered. In fact, it seems from the pictures like the shell is thick enough that the camera lens is actually recessed (instead of sticking out); I'm not 100% certain as it could just be an unintentional optical illusion. But if the camera lens is recessed that could be nice for protecting the lens a little bit. On the other hand though I do wonder about added weight and how that will feel (ie, if it will be noticeably heavier?). The Galaxy Note 8 weighs 11.7 ounces (338g) and I believe the official Samsung Book Cover weighs 3.2 ounces (90.72g), which makes for 14.9 ounces total (just shy of a 1lb, which seems like a decently light amount). The Amazon page indicates a weight of the MoKo at 5oz, which (if correct) is just a little heavier than the Samsung case, so hopefully not enough to be noticeable.
I don't see any mention of wake/sleep being supported. But I know you mentioned the other Moko case you tried did support wake/sleep, so hopefully this one does too!
I wonder how well the PU leather is going to hold up to folding the front cover flat against the back. It seems that would put a bit of stress on the part that will be bending around the case so I wouldn't be surprised to see cracking start rather quickly in that area (depending on the quality).
I just noticed in one of the pictures (the one for the white color, where a hand is holding the case in the air, demonstrating the magnets holding the stand in a triangle) that the GN8 is popping out of the case a little (in the bottom right of the picture). Hopefully that was just an oversight on their part as they were swapping out cases for the pictures, and not actually indicative of a loose fit. Pictures of the other colors appear to be fitting snugly in those same poses.
I look forward to your next review! I think I'm down to considering the above Moko and the Poetic Slimline (mentioned by someone else). I'll keep my fingers crossed that this Moko will be significantly better than the other one you reviewed! :fingers-crossed:
Hey pluginalong I actually contacted the seller before purchasing, they said they support the sleep/wake function. It won't be shipping till next week but my current Moko case should hold till then
Sent from my GT-N5110 using xda app-developers app
JokeZony0u said:
Hey pluginalong I actually contacted the seller before purchasing, they said they support the sleep/wake function.
Click to expand...
Click to collapse
Hey, that's great to hear--this case really sounds promising!
I have one of these as well. I got a light blue one. I really like it except for the lack of magnets. I WANT sleep wake and would like for it to stay in place. Also I found that if I put it in my bag and it is kind of full it will turn the screen on and run the battery down.
Thats total crap if sellers are saying these things are "smart wake" when they aren't. I was hoping mine would arrive soon, but if it isn't going to work then looks like I'll be looking elsewhere.
Paypal dispute here I come! Lol
Sent from my GT-N5110 using Tapatalk 2
Yea it really is. The sellers are also refusing to refund me. I'm still in the middle of the dispute
Sent from my SPH-L710 using xda app-developers app
JokeZony0u said:
Yea it really is. The sellers are also refusing to refund me. I'm still in the middle of the dispute
Click to expand...
Click to collapse
Wow, that really sucks man! It is kind of mind-blowing that they would fight it when they clearly advertise the product as having a feature that it obviously lacks. I hope things work out for you!
I guess the only to do is check your consumer law...if you are going through paypal hammer home that it is misleading or deceptive. You should be ok though. Good luck
Sent from my HTC One X using Tapatalk 2
Bought KLD Also...
and it is a major disappointment - totally agree with OP. But, does anyone know exactly where the magnet should go? It should be possible to attach a slim, rubberized magnetic on the case in a discrete manner so as not to make the case totally ugly but yet turn on the Note?
docfreed said:
But, does anyone know exactly where the magnet should go?
Click to expand...
Click to collapse
I think from some videos I saw (a few weeks ago) of the official Samsung Book Cover case that it seemed like the magnet must be somewhere on the left side as the wake/sleep seemed to be triggered by movement on the left side as opposed to the right side being lifted (which perhaps might be done in order avoid errant wake/sleep events since the right side can slide around some on some cases?). My guess is that the magnet would be somewhere within the bezel area and not under the screen proper. The reason being is that the Wacom technology works in part through electromagnetic fields (if I'm remembering correctly) and I would imagine that a wake/sleep magnet would somehow complicate that. So if you have a magnet to experiment with you could try running it around the bezel (starting with the left side) and see if you can trigger the wake/sleep. If it were me I'd start in the middle of the left bezel (when in portrait orientation).
If you don't have a magnet on hand you could also try various metal objects that are capable of carrying a magnetic charge as some technology works by responding the disruption/change of a magnetic field, which doesn't actually require another magnet, but just an object with enough of a hint of its own natural field to cause a change (I believe this is how some stoplights work here in the US, where there are wires in the ground to notify the stoplight a car is waiting, because the car disrupts/changes the electromagnetic field of the wire). I'm not totally sure if this principal can work on this small of a scale or not, but it could be worth a shot for some limited experiments.
docfreed said:
But, does anyone know exactly where the magnet should go?
Click to expand...
Click to collapse
Check out the following post and the rest of that thread:
http://forum.xda-developers.com/showpost.php?p=40708374&postcount=6
Looks like my hunches were incorrect.
I have just ordered this one from ebay:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121107475861
(I cannot post links yet, you'll need to copy and paste in your web browser)
It is cheap and looks slim and similar to the KLD one and it has a magnetic tab to keep it securely closed.
According to the description it supports "auto sleep and wake up when close and open" but I am not sure if I believe it. I can always open a dispute if it is not true
griguolcomerranas said:
I have just ordered this one from ebay:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121107475861
Click to expand...
Click to collapse
Interesting. I'll be curious to hear how it turns out.
pluginalong said:
Interesting. I'll be curious to hear how it turns out.
Click to expand...
Click to collapse
Sure, I will post my comments once I receive it.
Usually it takes around 2 weeks for the packets from Hong Kong
damn i just ordered this case thinking it had the smart sleep wakeup feature
melvill said:
damn i just ordered this case thinking it had the smart sleep wakeup feature
Click to expand...
Click to collapse
Yea I thought so too when I ordered. If it's the KLD you ordered, I can definitely confirm that it doesn't support that function. I FINALLY got my sale disputed
Update
Even though I didn't like this case, I wanted to use it because it was slim. So while I waited for the Moko Shell (which I use now) I used the KLD everday for a solid week.
3 more things I've noticed that makes it even worse!
1- extended use with the cover as a stand eventually makes the cover pop up and as far as I've seen, it hasn't been able to flatten back out properly
2- Because this case lacks the sleep/wake function, you have to turn on the tablet with either the power button (or home). Unfortunately, I guess KLD really wanted to add that protection there- so there's a bezel above the power button- but this makes pressing the volume & power button a lot more difficult!
3- Finally, folding the cover back is also a problem. The stitching for the cover looks nice but when it's folded, it makes the tablet poof up (notice the rather big gap in the folded area- not present on other cases). Writing on the tablet with the cover folded back causes a "bouncy" feel.
Check out the pics to see what I'm talking about
JokeZony0u said:
3 more things I've noticed that makes it even worse!
....
Check out the pics to see what I'm talking about
Click to expand...
Click to collapse
Thanks for the additional followup and pics! All 3 of those things are very helpful to know!
Unfortunately, I ordered the KLD case a few days before reading this thread. It seems nice enough. Its the style I like. But I only popped my Note in and out of it. I didn't use it for any length of time. I had also ordered a Rock Mix case and that's what I'm using. It does have sleep/wake function. I filed a complaint with the KLD seller and he initially offered a full refund if I sent the case back (with him paying shipping) or $5.00 refund. He then sent another offer to refund me 100% and let me keep the case if I gave him positive feedback. I accidently accepted the $5.00 offer. That's fine though because I wanted to keep the case. It's stored away as a backup.
Howdy, this is my first review. I thought I would have enjoyed a thread like this so I would create one. I am comparing the dot view ice to the dot view for the m8 because that is what I had and most likely what other have had. A side note, I am loving this phone! (And pics were taken with my old HTC EVO 4G LTE)
PICS:
http://imgur.com/a/s1Mli#0
The black m9 version is lighter than the m8 black version
The m9 'dot holes' are fractionally bigger than the m8's. To me, this makes the dots seem more vivid and brighter
The selfie-cam is no longer visible on the m9 version and is essentially protected
The m9 version covers the entire edge of the phone.
The m9 version is very tight on the phone. I really don't think dirt and things will get in between the phone and the case with the way the edge grips onto the phone. However because of this, the phone is very difficult to get ouf of the case. I feel that I might damage the case or the phone when removing it.
Since the case covers the entire phone (around the edges), the volume and power buttons are now covered. I feel they are a bit difficult to determine if I am pushing them- there is no clicky feel or noise made when pushing them.
Since the back is clear plastic, I feel that the outside will eventually be scratched to heck. I personally lay my phone with the screen up though usually.
The flappy cover still has the same rigidness and (I feel) quality as before.
The m8 doesn't function in the m9 case and the mm9 doesn't function in the m8 case. They DO fit in each other's cases, but the magnet that turns on the functionality is offset from the sensors rendering them incompatible.
If anyone feels that I missed anything, feel free to add to the list.
typhoonikan said:
Howdy, this is my first review. I thought I would have enjoyed a thread like this so I would create one. I am comparing the dot view ice to the dot view for the m8 because that is what I had and most likely what other have had. A side note, I am loving this phone! (And pics were taken with my old HTC EVO 4G LTE)
PICS:
http://imgur.com/a/s1Mli#0
The black m9 version is lighter than the m8 black version
The m9 'dot holes' are fractionally bigger than the m8's. To me, this makes the dots seem more vivid and brighter
The selfie-cam is no longer visible on the m9 version and is essentially protected
The m9 version covers the entire edge of the phone.
The m9 version is very tight on the phone. I really don't think dirt and things will get in between the phone and the case with the way the edge grips onto the phone. However because of this, the phone is very difficult to get ouf of the case. I feel that I might damage the case or the phone when removing it.
Since the case covers the entire phone (around the edges), the volume and power buttons are now covered. I feel they are a bit difficult to determine if I am pushing them- there is no clicky feel or noise made when pushing them.
Since the back is clear plastic, I feel that the outside will eventually be scratched to heck. I personally lay my phone with the screen up though usually.
The flappy cover still has the same rigidness and (I feel) quality as before.
The m8 doesn't function in the m9 case and the mm9 doesn't function in the m8 case. They DO fit in each other's cases, but the magnet that turns on the functionality is offset from the sensors rendering them incompatible.
If anyone feels that I missed anything, feel free to add to the list.
Click to expand...
Click to collapse
I can confirm that the M9 does not work in the M8 case. I have had a test M9 since January and an M8 with Dotview. As you state, the magnets are in different locations, as are the sensors. HTC told me early on that the M8 case wouldn't work.
Got the Dot View ICE edition for my M9, I'm really loving it. everybody at work was very impressed with it's functionality.
The thing that I'm uneasy about is the HTC Universal Car Mount for the M9. I mean using the car mount is really seamless. My problem is having to remove the phone from the case if I want to put it in the mount because I'm afraid the front cover will break or bend to the point where its no longer usable, at which point I will have a regular see trough case with no dot view at all...
Any one else having this issue?
Looks like the phone won't be popping out of the case as much or at all this time around.
I got one of these with a Tmobile gift card I had. I love the dot view and how it functions but the flip case isn't for me. It's awkward to use the phone with the flap open because it wants to spring back to the phone, and it's just a weird grip to use while using the device.
I really dig the look, size, and feature though!
Hi!
Stupid question maybe.. I've had a Dot View Ice since monday. I haven't paid much attention to the cover when it's closed, but today I realized that when I turn my phone sideways or upside down, the cover opens. Shouldn't that be prevented by the magnet inside?
Can anyone tell me if they experience this too or is my Dot View just ruined after four days?
petermulders said:
Hi!
Stupid question maybe.. I've had a Dot View Ice since monday. I haven't paid much attention to the cover when it's closed, but today I realized that when I turn my phone sideways or upside down, the cover opens. Shouldn't that be prevented by the magnet inside?
Can anyone tell me if they experience this too or is my Dot View just ruined after four days?
Click to expand...
Click to collapse
I don't think it is ruined, I don't think the magnet is strong enough to out weigh the rubber casing and if you keep the case on while using your phone (more than 20 mins with cover bent to the back) it eventually wears down to the point where it will flip open turned sideways or upside down. I noticed this recently and take the phone out of the case when I am at home to preserve the elasticity of the case. Regardless it isn't like it was when I first purchased it, but I still use it to protect my phone when I am out and about.
BUBBA DUB'S said:
I don't think it is ruined, I don't think the magnet is strong enough to out weigh the rubber casing and if you keep the case on while using your phone (more than 20 mins with cover bent to the back) it eventually wears down to the point where it will flip open turned sideways or upside down. I noticed this recently and take the phone out of the case when I am at home to preserve the elasticity of the case. Regardless it isn't like it was when I first purchased it, but I still use it to protect my phone when I am out and about.
Click to expand...
Click to collapse
Okay it's not just my case than.. Kind of disappointing though as it did hold the cover in the first few days of use..
petermulders said:
Okay it's not just my case than.. Kind of disappointing though as it did hold the cover in the first few days of use..
Click to expand...
Click to collapse
I agree, for what we paid for it , it shouldn't have lost its "spunk" with in the first week of use. Its still a nice case and provides protection which matters most in the end.
FIt
I just got this case in the mail and it looks very slick. My only issue....it doesn't close all the way! I do have a glass screen protector so that my be the issue. Any one else having the same issue? or did I just get a defective case?
agreen1985 said:
I just got this case in the mail and it looks very slick. My only issue....it doesn't close all the way! I do have a glass screen protector so that my be the issue. Any one else having the same issue? or did I just get a defective case?
Click to expand...
Click to collapse
The screen protector is the issue. You don't need it anyway now.
I don't really know how it should be but the front flip cover sitting very los after few days of use. Coming from M7, no idea about M8 dot view only my girlfriend told me the phone is not save in
I have the Ice one and it doesn't close properly on mine either. No screen protector on either. Shoddy really.
typhoonikan said:
The screen protector is the issue. You don't need it anyway now.
Click to expand...
Click to collapse
Does the case have a built in screen protector because my last HTC that I had was the flip case and it wouldn't close all of the way and I thought I was OK, but the screen still got scratched.
I just got the premium case (non-ice). I believe the flap is just as rigid and will tear like the ice edition did. Meanwhile my m8 dot view never tore over two years. I hope this one lasts a while.
typhoonikan said:
I just got the premium case (non-ice). I believe the flap is just as rigid and will tear like the ice edition did. Meanwhile my m8 dot view never tore over two years. I hope this one lasts a while.
Click to expand...
Click to collapse
I had mine for 2wks and it was already tearing off. Exchanged it for a cheap-o Body Glove case with a stand. I really wish the dot-view was more durable, as I really like the idea!
i love this case but in 2 weeks , the front was separated from the back
and i didnt used it that much, nothing wrong of my part
thinking in glue it together again, any ideas?
ratjr15 said:
I had mine for 2wks and it was already tearing off. Exchanged it for a cheap-o Body Glove case with a stand. I really wish the dot-view was more durable, as I really like the idea!
Click to expand...
Click to collapse
guitmz said:
i love this case but in 2 weeks , the front was separated from the back
and i didnt used it that much, nothing wrong of my part
thinking in glue it together again, any ideas?
Click to expand...
Click to collapse
So far, mine isn't tearing, but I have seldom opened it more than 90 degrees. Lol