[Review] HTC Dot View ICE edition - One (M9) Accessories

Howdy, this is my first review. I thought I would have enjoyed a thread like this so I would create one. I am comparing the dot view ice to the dot view for the m8 because that is what I had and most likely what other have had. A side note, I am loving this phone! (And pics were taken with my old HTC EVO 4G LTE)
PICS:
http://imgur.com/a/s1Mli#0
The black m9 version is lighter than the m8 black version
The m9 'dot holes' are fractionally bigger than the m8's. To me, this makes the dots seem more vivid and brighter
The selfie-cam is no longer visible on the m9 version and is essentially protected
The m9 version covers the entire edge of the phone.
The m9 version is very tight on the phone. I really don't think dirt and things will get in between the phone and the case with the way the edge grips onto the phone. However because of this, the phone is very difficult to get ouf of the case. I feel that I might damage the case or the phone when removing it.
Since the case covers the entire phone (around the edges), the volume and power buttons are now covered. I feel they are a bit difficult to determine if I am pushing them- there is no clicky feel or noise made when pushing them.
Since the back is clear plastic, I feel that the outside will eventually be scratched to heck. I personally lay my phone with the screen up though usually.
The flappy cover still has the same rigidness and (I feel) quality as before.
The m8 doesn't function in the m9 case and the mm9 doesn't function in the m8 case. They DO fit in each other's cases, but the magnet that turns on the functionality is offset from the sensors rendering them incompatible.
If anyone feels that I missed anything, feel free to add to the list.

typhoonikan said:
Howdy, this is my first review. I thought I would have enjoyed a thread like this so I would create one. I am comparing the dot view ice to the dot view for the m8 because that is what I had and most likely what other have had. A side note, I am loving this phone! (And pics were taken with my old HTC EVO 4G LTE)
PICS:
http://imgur.com/a/s1Mli#0
The black m9 version is lighter than the m8 black version
The m9 'dot holes' are fractionally bigger than the m8's. To me, this makes the dots seem more vivid and brighter
The selfie-cam is no longer visible on the m9 version and is essentially protected
The m9 version covers the entire edge of the phone.
The m9 version is very tight on the phone. I really don't think dirt and things will get in between the phone and the case with the way the edge grips onto the phone. However because of this, the phone is very difficult to get ouf of the case. I feel that I might damage the case or the phone when removing it.
Since the case covers the entire phone (around the edges), the volume and power buttons are now covered. I feel they are a bit difficult to determine if I am pushing them- there is no clicky feel or noise made when pushing them.
Since the back is clear plastic, I feel that the outside will eventually be scratched to heck. I personally lay my phone with the screen up though usually.
The flappy cover still has the same rigidness and (I feel) quality as before.
The m8 doesn't function in the m9 case and the mm9 doesn't function in the m8 case. They DO fit in each other's cases, but the magnet that turns on the functionality is offset from the sensors rendering them incompatible.
If anyone feels that I missed anything, feel free to add to the list.
Click to expand...
Click to collapse
I can confirm that the M9 does not work in the M8 case. I have had a test M9 since January and an M8 with Dotview. As you state, the magnets are in different locations, as are the sensors. HTC told me early on that the M8 case wouldn't work.

Got the Dot View ICE edition for my M9, I'm really loving it. everybody at work was very impressed with it's functionality.
The thing that I'm uneasy about is the HTC Universal Car Mount for the M9. I mean using the car mount is really seamless. My problem is having to remove the phone from the case if I want to put it in the mount because I'm afraid the front cover will break or bend to the point where its no longer usable, at which point I will have a regular see trough case with no dot view at all...
Any one else having this issue?

Looks like the phone won't be popping out of the case as much or at all this time around.

I got one of these with a Tmobile gift card I had. I love the dot view and how it functions but the flip case isn't for me. It's awkward to use the phone with the flap open because it wants to spring back to the phone, and it's just a weird grip to use while using the device.
I really dig the look, size, and feature though!

Hi!
Stupid question maybe.. I've had a Dot View Ice since monday. I haven't paid much attention to the cover when it's closed, but today I realized that when I turn my phone sideways or upside down, the cover opens. Shouldn't that be prevented by the magnet inside?
Can anyone tell me if they experience this too or is my Dot View just ruined after four days?

petermulders said:
Hi!
Stupid question maybe.. I've had a Dot View Ice since monday. I haven't paid much attention to the cover when it's closed, but today I realized that when I turn my phone sideways or upside down, the cover opens. Shouldn't that be prevented by the magnet inside?
Can anyone tell me if they experience this too or is my Dot View just ruined after four days?
Click to expand...
Click to collapse
I don't think it is ruined, I don't think the magnet is strong enough to out weigh the rubber casing and if you keep the case on while using your phone (more than 20 mins with cover bent to the back) it eventually wears down to the point where it will flip open turned sideways or upside down. I noticed this recently and take the phone out of the case when I am at home to preserve the elasticity of the case. Regardless it isn't like it was when I first purchased it, but I still use it to protect my phone when I am out and about.

BUBBA DUB'S said:
I don't think it is ruined, I don't think the magnet is strong enough to out weigh the rubber casing and if you keep the case on while using your phone (more than 20 mins with cover bent to the back) it eventually wears down to the point where it will flip open turned sideways or upside down. I noticed this recently and take the phone out of the case when I am at home to preserve the elasticity of the case. Regardless it isn't like it was when I first purchased it, but I still use it to protect my phone when I am out and about.
Click to expand...
Click to collapse
Okay it's not just my case than.. Kind of disappointing though as it did hold the cover in the first few days of use..

petermulders said:
Okay it's not just my case than.. Kind of disappointing though as it did hold the cover in the first few days of use..
Click to expand...
Click to collapse
I agree, for what we paid for it , it shouldn't have lost its "spunk" with in the first week of use. Its still a nice case and provides protection which matters most in the end.

FIt
I just got this case in the mail and it looks very slick. My only issue....it doesn't close all the way! I do have a glass screen protector so that my be the issue. Any one else having the same issue? or did I just get a defective case?

agreen1985 said:
I just got this case in the mail and it looks very slick. My only issue....it doesn't close all the way! I do have a glass screen protector so that my be the issue. Any one else having the same issue? or did I just get a defective case?
Click to expand...
Click to collapse
The screen protector is the issue. You don't need it anyway now.

I don't really know how it should be but the front flip cover sitting very los after few days of use. Coming from M7, no idea about M8 dot view only my girlfriend told me the phone is not save in

I have the Ice one and it doesn't close properly on mine either. No screen protector on either. Shoddy really.

typhoonikan said:
The screen protector is the issue. You don't need it anyway now.
Click to expand...
Click to collapse
Does the case have a built in screen protector because my last HTC that I had was the flip case and it wouldn't close all of the way and I thought I was OK, but the screen still got scratched.

I just got the premium case (non-ice). I believe the flap is just as rigid and will tear like the ice edition did. Meanwhile my m8 dot view never tore over two years. I hope this one lasts a while.

typhoonikan said:
I just got the premium case (non-ice). I believe the flap is just as rigid and will tear like the ice edition did. Meanwhile my m8 dot view never tore over two years. I hope this one lasts a while.
Click to expand...
Click to collapse
I had mine for 2wks and it was already tearing off. Exchanged it for a cheap-o Body Glove case with a stand. I really wish the dot-view was more durable, as I really like the idea!

i love this case but in 2 weeks , the front was separated from the back
and i didnt used it that much, nothing wrong of my part
thinking in glue it together again, any ideas?

ratjr15 said:
I had mine for 2wks and it was already tearing off. Exchanged it for a cheap-o Body Glove case with a stand. I really wish the dot-view was more durable, as I really like the idea!
Click to expand...
Click to collapse
guitmz said:
i love this case but in 2 weeks , the front was separated from the back
and i didnt used it that much, nothing wrong of my part
thinking in glue it together again, any ideas?
Click to expand...
Click to collapse
So far, mine isn't tearing, but I have seldom opened it more than 90 degrees. Lol

Related

Silicone case for flat back

Hi I am currently awaiting delivery for my DHD (and it could be a week or two).
I am wondering if anyone who owns a Silicone case - or something similar, and has found a case that allows for the phone to sit flat on a table surface to allow for one handed use. With the camera design set out from the main body I am hoping the case would come up to this level preventing rocking action.
Does the phone rock around on a table when used without a case or is it bearable?
I will then add a screen protector perhaps a Zagg product or similar.
Any ideas?
Cheers
Si
mine is currently cases-less, and does rock around when it on the table. however, placing a little phone sock under the phone is good at reducing the rocking, but i cant find one big enough to fit the phone in yet.
still looking for a good case, but it seems 3rd parties are being slow with this phone.
I'm needing a case or something like a bumper for my DHD.
I've had it 3 weeks and dropped it twice on to hard surfaces, got 2 small scratches and a small dent at the power button (since the button was flush with the case to start with, its actually made it a bit better!! LOL)
but my luck won't last too much longer so I need to protect it...
any ideas??
Sent from my Desire HD using XDA App
I was thinking of using a phone sock to help keep it protected, the problem is having to slide the phone out every time i want to use it, id end up just leaving it somewhere. But keeping it steady with one is a good idea - but overall I'm looking for something more protective, good looking and will prevent the rocking.
I'm normally quite good with not dropping my phones, but a bumper or silicone case would be a must with a screen this size...don't really want to scratch or dent it (even if it has its upsides ;D ).
I'll keep looking, the annoying thing is that all the silicone ones I have found only have front or back on photos, not from the side...which is obviously important to check the level in relation to the camera area.
Cheers
Si
Was browsing through Google products and found this new one on Play, looks really cool not as dull and uninspired as the average silicone protector. I don't know again if it will help the issue with the raised camera, but I am still really interested.
play.com/Mobiles/Mobile/4-/17123125/Exspect-HTC-Desire-HD-Tough-Silicone-Case-Black/Product.html?_$ja=tsid:11518|cc:|prd:17123125|cat:Mobile+#
I bought one of these and it does what it says on the tim. Protects the back and sides while offering unfettered access to the screen. It helps with the grip too, so I'm less likely to drop it (eek!)
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
http://forum.xda-developers.com/showthread.php?t=824377
here what i found while looking for the case and ended up with a very good one
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
Yeah it looks good, nice to know its tougher than silicone, but unless it solves the rocking issue - I still prefer the one I found on Play...just because its cool looking.
but if you give it a go, let us know how well it performs and fits.
Well tbh I'm leaning toward the black one too but this TPU thing caught my attention and I was wondering if anyone has it
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
notice they have a cut out for the power button which was a issue on my first gel case
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
I don't think anyone should have it yet since HTC haven't released it.
I ordered it from handtec before but they say they will get it at the end of the month so I canceled mine.
combat goofwing said:
notice they have a cut out for the power button which was a issue on my first gel case
Click to expand...
Click to collapse
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
emwdava said:
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
Click to expand...
Click to collapse
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
combat goofwing said:
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
Click to expand...
Click to collapse
To be honest, I don't think the picture shown is even the actual product. There is no hole for the speaker and the whole is definitely for the 3.5mm jack. (you can see the power button raised on the upper right corner). Since the case is not released yet, this is quite possible.
I've got this one too...
As CD993 says it does wobble, but only marginally... this is a TOUCH screen after all, you don't need to press very hard for it to respond!
The fact it's nearly £10 cheaper than the official HTC one (and yes, the image is wrong or else it's not going to have enough cutouts on the back!) is good enough for me!
cd993 said:
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150506304658"]BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
Click to expand...
Click to collapse
WTF is the matter with posting links btw? At what point does this 'privilege' begin?

Cases / Shells - what're you getting / reviews:

Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.

Samsung Galaxy Note 8.0 book cover case review with wake and sleep mode

Im really liking the wake and sleep feature on the Galaxy Note 8. This is a nice feature found on the iPad Mini and the Kindle Fire HD tablets.
http://youtu.be/3A8rtSead0I
http://www.youtube.com/watch?v=3A8rtSead0I&feature=youtube_gdata_player
Sent from my GT-N5110 using Tapatalk 2
Got the book cover case and really like the sleep and wake feature of it
To anyone who picked one up, how does it feel in terms of bulk? Also, when the cover is folded over, does it lay flush with the spine or does the flap stick out?
Juvenall said:
To anyone who picked one up, how does it feel in terms of bulk? Also, when the cover is folded over, does it lay flush with the spine or does the flap stick out?
Click to expand...
Click to collapse
It is very thin, as thin as my nexus 4, and feels like a father compared to my original xoom
the cover is just like the s3 flip cover but it snaps on the back instead of replacing the battery cover
and it triggers auto on and off like the ipad smart cover
Caved in and picked up the cover on the way home today. Some initial thoughts:
1) The case adds no real bulk to the device itself. The backplate and the screen flap are both super thin, so even when folded over, it's doable for someone like me who hates cases.
2) Because its all so thin, however, it does feel sorta cheap. If this suffers from the same build issues I've read the S3 version has, I don't have high hopes that it's going to last long.
3) The screen on/off thing is awesome. The sensor part of this is actually along the spine, not the edge of the flap. Not a complaint, just an observation.
4) When folded over, there is a bit of a "lip" around the spine. I can't say I love this, but it doesn't really impact the way I hold the device.
5) The "stand" feature is alright and seems stable enough as long as you use it in the single position it was designed for. I do with it had a few more angle options.
Verdict? Meh. It's not a bad case, and I don't intend to return mine, but had I been given the opportunity to play with one before, I don't think I would have spent the extra $50. At half that price, it wouldn't change my opinion, but I'd be far less disappointed.
I have the book cover for my 8.0 and it is not very heavy, acts like a stand and turns the Note on and off when I open and close it. Very convenient. Got mine on Amazon for $5.99. Thought I would give it a try for that amount . So far very happy with it.
rfb813 said:
I have the book cover for my 8.0 and it is not very heavy, acts like a stand and turns the Note on and off when I open and close it. Very convenient. Got mine on Amazon for $5.99. Thought I would give it a try for that amount . So far very happy with it.
Click to expand...
Click to collapse
The only one I see on Amazon for that price is the IVSO version. What I hate about those cases is how you actually have to put the tablet inside and wraps around the front. The official book cover simply snaps onto the back of the Note 8.
Juvenall said:
The only one I see on Amazon for that price is the IVSO version. What I hate about those cases is how you actually have to put the tablet inside and wraps around the front. The official book cover simply snaps onto the back of the Note 8.
Click to expand...
Click to collapse
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
rfb813 said:
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Ahh, right on. Same sort of issue for me with the case covering the bezel, but you should post up a quick review thread and a couple of pictures.
rfb813 said:
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I bought that same cover and also bought a similar one:
http://www.amazon.com/Dealgadgets-S...&qid=1366425979&sr=8-2&keywords=Galaxy+note+8
They both look essentially the same and add about the same bulk.
Major difference is that the Moko cover has auto wake, soft inside material, hand holder, and the pen holder doesn't interfere with IR. But it reeks! I mean it smells so bad I couldn't keep it in the same room with me. I left it outside overnight and it is still off gassing.
The Dealgadget cover has no weird smell. But also no wake function, no softer inside material, no hand holder. The pen holder is in a better location except if you plan to use the IR function. It is on the side of the tablet and I found it interferes with the IR.
So I ended up ordering the Samsung cover from this site. Since its coming from Hong Kong it will probably take a couple of weeks to get it. But I can't justify spending $50 for a cover. (Even though I probably will have spent close to $50 before I find one I like).
http://dx-box.com/catalogsearch/result/index/?cat=364&q=Galaxy+Note+8.0
I never purchased from this site before so I can't vouch for them yet.
I also have the upcoming Poetic case on order since its only $5. But it's not due to ship till May.
good one
hi budy go to your level best and may astonished to the forums:good:
When looking for some case reviews I stumbled over http://galaxynote8cases.com/ and they actually seem to have some good reviews. The only thing that is a real pain with the Note 8 is that it's tough to find any accessories for it.
I just got the white book case cover, its perfect for people who are careful with their electronics but like that extra layer to prevent scratches. Adds virtually zero weight.
tweak. said:
I just got the white book case cover, its perfect for people who are careful with their electronics but like that extra layer to prevent scratches. Adds virtually zero weight.
Click to expand...
Click to collapse
Thats the big selling point for me here. The absolute lack of bulk on this is awesome. I only wish this had two more features:
1) A magnetic hold when the front flap is covering the screen.
2) Another magnetic hold for the flap when its folded over the back.
Sent from my GT-N5110 using xda premium
There is a slight hold on the front side, as to not make it appear flimsy. When you flip it around back it "gives" a bit easier to fit snugly. Hard to explain, but clearly well designed.
Where are people buying this case, i cant find it anywhere.
The Book Cover Case is available in the US at local Best Buy, Staples and Office Depot. The only color is white, but the other colors will be available shortly.
Sent from my GT-N5110 using Tapatalk 2
theraker007 said:
Where are people buying this case, i cant find it anywhere.
Click to expand...
Click to collapse
got mine at best buy, it was the only one left in stock.
My Best Buy had black & white to choose from.
tweak. said:
My Best Buy had black & white to choose from.
Click to expand...
Click to collapse
wish i could have gotten black. i have friends that have the white cover on their sIII's and they get very dirty here in egypt, but i had to get something and white was the only choice.

Unicorn Beetle Case

Hi
My unicorn beetle case just arrive and I want to share my toughts with you.
First I order it from Amazon as I live in Chile the final cost was around 50 bucks.
I drop my first moto x 2014 (the one in the pics) and it screen shattered so a case for my new moto X was a must.
The case came in a really simple cardboard box, inside you find the 3 parts of the case:
- Front panel
- Back panel
- Belt clip holster
The plastic bag that contain them have a QR code with a link to a video of how asamble it but is really very easy.
The front panel have a integrated screen protector and only leave the mic, front camera and speaker unprotected (this is why this case is not waterproof).
The backpanel leaves the Motorola, the camera and the back mics unprotected also, but it have protectors for usb port and the audio jack.
The only fail that I notice is the holster, only once I was able to attach the phone to it, I haven't been able to do it again, it should be a lot more easier, but anyway I dind't plan to use it.
The phone dosn't gain a lot of weight and I still feel it comfortable.
Some photos
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10405301_10152553649268087_4469391920130927022_n.jpg?oh=8d7511c2cbfc010f120973702630fb9f&oe=550D4C81
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10806349_10152553649388087_3407626409072602358_n.jpg?oh=2a8abb90dd5144da3481391dbc1befdb&oe=551C27EA (bubbles are from the phone screen protector not the case)
https:// scontent-a-gru.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10805777_10152553649488087_2531340061064646856_n.jpg?oh=91403792398331180f6afe21ecc3baf2&oe=55074813
https:// fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10389011_10152553649728087_8947927708711168419_n.jpg?oh=73d17d5df7fff4b68b84570d2aa7289c&oe=5518C45F&__gda__=1428036896_20efd91e8fa2e0d5d4718e9fde82870a
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1972507_10152553649968087_18121166613486209_n.jpg?oh=741823360366a47bb0c241a1021c1439&oe=5506B170
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10393956_10152553649863087_2683143752115958080_n.jpg?oh=6bf6b9fa2264386a272e4bf24af1d7ec&oe=54D99F75 (the stains are my fault)
Where did you buy it from? I am looking on amazon and I dont see it for sale any more.
blkbltwrestler said:
Where did you buy it from? I am looking on amazon and I dont see it for sale any more.
Click to expand...
Click to collapse
Amazon here is the link
http:// www.amazon.com/SUPCASE-Full-body-Pr...sim_cps_2?ie=UTF8&refRID=19648HH318XVMNJXQVH7
But now appears as unavaible.
It don't show up in the company webpage neither I don't know why.
Update:
The holster works great but the screen goes looking inside, the camera face out that is the reason why it dont fit when i tried
CTuna said:
Amazon here is the link
http:// www.amazon.com/SUPCASE-Full-body-Pr...sim_cps_2?ie=UTF8&refRID=19648HH318XVMNJXQVH7
But now appears as unavaible.
It don't show up in the company webpage neither I don't know why.
Click to expand...
Click to collapse
Thanks! thats all I was able to find too.
blkbltwrestler said:
Thanks! thats all I was able to find too.
Click to expand...
Click to collapse
Look at the reviews at amazon one of the last ones say that the guy bought 70! of these maybe they are out of stock.
CTuna said:
Look at the reviews at amazon one of the last ones say that the guy bought 70! of these maybe they are out of stock.
Click to expand...
Click to collapse
yikes that is crazy. Thats probably what happened they just sold out. Hopefully they get more in stock soon.
Can you give me the name of the Amazon Seller that you bought this from?
l_stevens said:
Can you give me the name of the Amazon Seller that you bought this from?
Click to expand...
Click to collapse
I think that was supcase as they made them, but I can't give you a specific answers as I bought it from Busca Libre a website that buy the things for you and handle all the shipping, taxes and other and charges you in local currency
Its back in stock!
CTuna said:
Its back in stock!
Click to expand...
Click to collapse
I actually just picked one up. I really like it. Its kinda big so I am not going to use it as my daily case just when I need the extra protection.
blkbltwrestler said:
I actually just picked one up. I really like it. Its kinda big so I am not going to use it as my daily case just when I need the extra protection.
Click to expand...
Click to collapse
I don't know if that will be a great idea, I use mine all the time but for a test that I really need to use wolfram alpha I remove it, I haven't been able since then to use it with out bubbles in the screen protector.
Actually bought one,
Very happy with it, just the hard plastic back is easily scratchable, i already got a deep scracth in it... Tried it on a coloured back moto X too and the frosted back is wonderful !
15€ on Amazon.fr
any updates? i tried the link you posted but had no luck. i got my phone on jan 2,15 and havent yet been able to find a case i like for it.
I've had this case for about a week, and I have mixed feelings. It's a very rugged case, and I feel comfortable about the phone not being damaged. However, there are a few things I would change about this case if I could. First, since the case isn't waterproof, it could do without the integrated screen protector and headphone/power port covers. It takes a little bit of dexterity to hold the cover open just to plug in the charger. Secondly, the power and volume buttons could be more pronounced. I have accidentally turned off the screen many times while trying to adjust the volume.
I don't regret the purchase, though, and I'd definitely recommend it as an alternative to Otterbox.
I've had this case in white for just over a month, here are my impressions.
- sturdy case
- excellent quality
- great price
First thing I did was yank off the screen protector. It is a far better plan to apply something like a BSE skin than to keep using the screen protector that's included.
This means you can take off/on the case with little fuss as much as you want. Its easy to remove and seems up to the task of repeated removal.
The fact that the front of the phone sits in the trim piece is awesome. Makes for a sandwiched and protected feel.
I like the port covers. Yes, they can be a pain to pop open for time to time but again they also seem to be built well enough to take the abuse.
Since we don't have a waterproof phone but only the nanocoating inside I like the added ingress protection that they offer.
I have the white/grey case and it is gaining some darkness on the corners but I'll blame my grubby mitts on that one.
The holster is good not great. Phone sits well in it and feels well made. Too bad its missing the kickstand in the clip.
All in all I give it a 9/10.
For the price it sells for and the protection it offers its a no brainer.
Sent from my BambooX
white unicorn?!
@shanedragon, could you please post some pics of the case? I'm about to pull the trigger on the black/blue version, but I'm curious about how the white looks in real life.
I'll do the same, if I get the blue.
Thanks!
-Brian*
buraian98 said:
@shanedragon, could you please post some pics of the case? I'm about to pull the trigger on the black/blue version, but I'm curious about how the white looks in real life.
I'll do the same, if I get the blue.
Thanks!
-Brian*
Click to expand...
Click to collapse
I have it in white. Here are a few photos I took. The photo of the front is a bit blurry.. Sorry!
I've had one of these cases for a while. I only use it when at work and do a manual job with dust, grit, grime and angry bovines. Well they're not angry all the time! The case is the dark gray/black and is in not bad condition considering. The Moto X on the other hand is pristine despites drops out of open tractor doors, drops onto concrete and countless excursions onto cab floors.
The built in screen protector is useful as I don't have anything on my moto x 2014 screen. I tried a couple of the glass screen protectors but removed both after a short time with the edges lifting and dust getting under the lifted edges. I also like the port covers though agree both are a little tricky to open. That said I rarely open either when the case is fitted. On previous phones I've has dust and chaff get jammed in the usb port and once somehow managed to get an animal feed pellet stuck in the headphones jack.
When I ordered the Unicorn case, unbeknown to me the mrs had ordered me an Otterbox Defender case so have that as well. It seems to bulk the phone more than the Unicorn case and the rubber texture makes it less easy to remove from pockets. It is also harder to fit compared to the Unicorn but on the other hand you about need a tyre lever to remove the Unicorn. It's a good case but prefer the Unicorn. I say again I only use a case on my Moto X for work. For pleasure it goes bare
I ordered the Beetle case, and it is in my opinion, the best case I have tried for the phone.
Thanks for the suggestion

Seidio Surface case kickstand magnet issue

Posted this in page two of another thread but just wanted to make sure people saw this in case they didnt read it before they purchased the Surface case with the kickstand. Gonna call them tomorrow to make them aware:
I ordered my Surface case, received it today and I'm having issues. When the bottom piece of the outer shell slides on the screen goes dark. Cannot turn it back on. If I slide off the bottom piece it comes on, when it slides back on it puts the screen back to sleep. If i take a stand alone magnet and put it up to the back of the phone where the kick stand would be it turns off. Thinking there is a design flaw. Gonna call Seidio tomorrow. Kinda sucks I've been waiting for their holster for a while now.
Edit: Definitley a design flaw, I found this on Google's Nexus 6P help forum:
"I have found there is a magnetic sensor in the Nexus 6P to detect when the folio case cover has been closed so as to lock and turn off the screen of the phone. The sensor is located in the bottom left corner when looking at the front of the 6P. I found that this sensor also reacts to a magnetic field applied to the back side of the Nexus 6P in this same area (bottom right corner when looking at the back of the 6P). Herein lies the problem... When trying to use Android Beam through NFC by holding the back of the 6P to the back of another device, a magnetic field from the other device (the speaker perhaps) can trigger the magnetic sensor in the Nexus 6P, causing the Nexus 6P to lock and go to sleep before the NFC sensors have aligned. Both my OnePlus One and my Neuxs 7 2013 will put my Nexus 6P to sleep if I don't hold them carefully enough when trying to align the NFC sensors. Can anyone else confirm this? Why does this sensor also pick up magnetic fields on the back of the phone? Is there a way to disable the magnetic sensor if not using a folio case so this does not happen when trying to use Android Beam?"
That's a big problem..
Could you please post some pics of the phone with the case?
Thanks!
Sent from my Nexus 6P using Tapatalk
I'll have to see if mine suffers the same issue when it arrives. I have 2 Nexus 6P's to test it on, so that should provide a little better sample size.
Ronbo19 said:
Posted this in page two of another thread but just wanted to make sure people saw this in case they didnt read it before they purchased the Surface case with the kickstand. Gonna call them tomorrow to make them aware:
I ordered my Surface case, received it today and I'm having issues. When the bottom piece of the outer shell slides on the screen goes dark. Cannot turn it back on. If I slide off the bottom piece it comes on, when it slides back on it puts the screen back to sleep. If i take a stand alone magnet and put it up to the back of the phone where the kick stand would be it turns off. Thinking there is a design flaw. Gonna call Seidio tomorrow. Kinda sucks I've been waiting for their holster for a while now.
Edit: Definitley a design flaw, I found this on Google's Nexus 6P help forum:
"I have found there is a magnetic sensor in the Nexus 6P to detect when the folio case cover has been closed so as to lock and turn off the screen of the phone. The sensor is located in the bottom left corner when looking at the front of the 6P. I found that this sensor also reacts to a magnetic field applied to the back side of the Nexus 6P in this same area (bottom right corner when looking at the back of the 6P). Herein lies the problem... When trying to use Android Beam through NFC by holding the back of the 6P to the back of another device, a magnetic field from the other device (the speaker perhaps) can trigger the magnetic sensor in the Nexus 6P, causing the Nexus 6P to lock and go to sleep before the NFC sensors have aligned. Both my OnePlus One and my Neuxs 7 2013 will put my Nexus 6P to sleep if I don't hold them carefully enough when trying to align the NFC sensors. Can anyone else confirm this? Why does this sensor also pick up magnetic fields on the back of the phone? Is there a way to disable the magnetic sensor if not using a folio case so this does not happen when trying to use Android Beam?"
Click to expand...
Click to collapse
Bummer! I was really looking forward to this case. Maybe they will release one without the kickstand (doubtful).
jal3223 said:
Bummer! I was really looking forward to this case. Maybe they will release one without the kickstand (doubtful).
Click to expand...
Click to collapse
Going to call them in the morning. I'll post the response I get.
I also REALLY want the Surface case, but I'm holding off until more people receive theirs and post whether they experience the same thing. I've had a Surface case on all my phones for several years. It's the slimmest I've found, gives the best protection, and the kickstand doesn't add much bulk. Can't tell you how many times I've dropped my phone and never had a problem.
Pig Vomit said:
I also REALLY want the Surface case, but I'm holding off until more people receive theirs and post whether they experience the same thing. I've had a Surface case on all my phones for several years. It's the slimmest I've found, gives the best protection, and the kickstand doesn't add much bulk. Can't tell you how many times I've dropped my phone and never had a problem.
Click to expand...
Click to collapse
Agreed. Some of the best cases I've ever used on my phones.
Spoke to them this morning and explained the issue. They created an RMA and are going to ship out a modified version, I'm assuming without the kickstand. I was told not to worry about sending back the old case so I'm gonna see if there is a way to get the kickstand out in the meantime without destroying the bottom half.
My Sedio case is arriving today (earlier than expected), so I will post a review in my case OP. If the issue is present on either of my 6P's I will let everyone know.
Ronbo19 said:
Spoke to them this morning and explained the issue. They created an RMA and are going to ship out a modified version, I'm assuming without the kickstand. I was told not to worry about sending back the old case so I'm gonna see if there is a way to get the kickstand out in the meantime without destroying the bottom half.
Click to expand...
Click to collapse
I would actually prefer the case w/o the kickstand. I don't like the bump it creates. So hopefully they will release the case w/o it.
Thanks again for the update!
Pilz said:
My Sedio case is arriving today (earlier than expected), so I will post a review in my case OP. If the issue is present on either of my 6P's I will let everyone know.
Click to expand...
Click to collapse
Great, curious to see if you run into the same issue.
Dror520 said:
I would actually prefer the case w/o the kickstand. I don't like the bump it creates. So hopefully they will release the case w/o it.
Thanks again for the update!
Click to expand...
Click to collapse
No problem. I agree, don't think I've ever used the kickstand but really like the protection the case offers and their holster.
Ronbo19 said:
Great, curious to see if you run into the same issue.
No problem. I agree, don't think I've ever used the kickstand but really like the protection the case offers and their holster.
Click to expand...
Click to collapse
Mine doesn't have that issue at all. I'm using the case now, and I will post my review later today. I'm not that impressed with the way Sedio did their button cutouts, but more on that later.
Edit: It seems that the bottom piece on my case wasn't pushed up completely becasue when I removed the case and put it back on the screen kept shutting off/staying off depending on how I installed it.
I received the case yesterday and also immediately noticed the problem. I called they are also sending me a replacement.
Meanwhile, I popped out the kickstand and turned it around and it seems ok for now. with it flipped around, you can't get your nail in to open the kick stand so its essentially useless.
Its really unfortunate that they didn't catch this design bug before shipping.
(I will say, this case makes the 6P feel really thick - I'm trying to decide if I like it or not)
richardyoo said:
I received the case yesterday and also immediately noticed the problem. I called they are also sending me a replacement.
Meanwhile, I popped out the kickstand and turned it around and it seems ok for now. with it flipped around, you can't get your nail in to open the kick stand so its essentially useless.)
Click to expand...
Click to collapse
Out of curiosity how did you do that. I've been trying to figure out how to accomplish that.
I called sedio because my case bows outward on one side where the two pieces connect, but they refused to help me because I order from their Amazon store. Their customer service is horrendous, and the agent (Shane) I spoke with was rude about anything I asked. I'm disappointed with their service, and case so far. I plan on sending it back immediately because of how they handled a simple question.
Edit: I finally spoke with a manager, and after having her repeat the same thing a few dozen times (in between no letting me say anything) they are sending me a replacement. I can't say I've encountered a CSR this bad in a long time, so I will try to ignore their rude representatives and use the case.
Ronbo19 said:
Out of curiosity how did you do that. I've been trying to figure out how to accomplish that.
Click to expand...
Click to collapse
The stand is just held in place by the black tape... you can see the black tape on the inside of the case. So you just gently push on the silver metal stand out the back - it should slowly release... it takes a little finesse but it's not terribly difficult.
Then once it's out, all you need to do is flip it around and stick it back in place...
Although the stand isn't accessible in this new orientation, at least, the case will work without turning the phone off.
I have the same issue with the screen turning off when the bottom part is slid on. Called them up and they're are sending a new modified version. They better send it 2nd day express which I paid extra for!
richardyoo said:
I received the case yesterday and also immediately noticed the problem. I called they are also sending me a replacement.
Meanwhile, I popped out the kickstand and turned it around and it seems ok for now. with it flipped around, you can't get your nail in to open the kick stand so its essentially useless.
Its really unfortunate that they didn't catch this design bug before shipping.
(I will say, this case makes the 6P feel really thick - I'm trying to decide if I like it or not)
Click to expand...
Click to collapse
Can you post any pics? My biggest concern (once they iron out this magnetic closing issue) is the thickness. I have the Spigen Rugged Armour and love the sleekness, but I'd like a kickstand since I often watch stuff on my phone. Any more comments regarding the thickness and pictures would be great!
ajizle123 said:
Can you post any pics? My biggest concern (once they iron out this magnetic closing issue) is the thickness. I have the Spigen Rugged Armour and love the sleekness, but I'd like a kickstand since I often watch stuff on my phone. Any more comments regarding the thickness and pictures would be great!
Click to expand...
Click to collapse
You can see my review of the case and pictures right here
The holster seems to be a bit spooky how it is designed. The phone hovers about an 1/8" above the surface from about midway up the holster to the top clamp. There is an 1/8" lip where the phone is placed on at the bottom of the holster where it rests. Maybe I'm being overly cautious here but it seems the phone could be bent over time if inserted enough times because of that extra space beneath the phone. .

Categories

Resources