Galaxy S5 Screen replacement - Galaxy S 5 Accessories

Hey... My screen shattered this past week while playing hockey (the puck hit my phone) and now the screen is completely blank.
I'm looking to order a nice screen, could someone please suggest where I could get one in Canada?
Thanks!

Only in Canada...sorry had to

Your digitizer is hosed. Find a replacement on Ebay.
Then look to youtube to study tear-down/disassemble tutorial because the S5 is not as easy as previous Galaxy models.
I replaced mine several months ago and all is well.

As a hockey player myself! left wing\defense. Where was your phone?

Panamon said:
Your digitizer is hosed. Find a replacement on Ebay.
Then look to youtube to study tear-down/disassemble tutorial because the S5 is not as easy as previous Galaxy models.
I replaced mine several months ago and all is well.
Click to expand...
Click to collapse
What adhesive did you use to secure the screen back to the housing? I see a lot of pre-cut adhesive stickers on ebay, and I bought a few of them. They're not as sticky as the original.

I seem to remember purchasing one of the black ones. Mine went back on ok but you'll never get a perfect seal again so forget about water resistance. That's gone for good.
Luckily I have a Zero Lemon extended battery so the case serves to keep the glass pressed against the body of the phone. I don't think I would trust the screen to not eventually lift free if not for the overlap of the TPU cover that came with the battery.
I've replaced glass on my S3 and S4 and used TPU covers on them afterwards for the above reason. Again, once the glass or digitizer are changed, they never adhere back as well as they were from the factory.

Related

Anyone bought this digitizer? [DealExtreme]

Hi,
My nexus one screen cracked (after falling from 3 feet high) and I need a replacement for the digitizer. I've found this one on dealextreme but I don't know if it will work properly. Has anyone tried it?
http://www.dealextreme.com/details.dx/sku.40671
I've also got this other option. A little more pricy
http://cgi.ebay.es/GENUINE-HTC-NEXU...ssories_RL&hash=item2eaeddd484#ht_2322wt_1137
by the way, can the "plastic opening tool" be replaced by a guitar pick?
thanks a lot
I can't help you with the digitizer but the guitar pick should work fine, it'll just be more difficult.
josealb said:
Hi,
My nexus one screen cracked (after falling from 3 feet high) and I need a replacement for the digitizer. I've found this one on dealextreme but I don't know if it will work properly. Has anyone tried it?
http://www.dealextreme.com/details.dx/sku.40671
I've also got this other option. A little more pricy
http://cgi.ebay.es/GENUINE-HTC-NEXU...ssories_RL&hash=item2eaeddd484#ht_2322wt_1137
by the way, can the "plastic opening tool" be replaced by a guitar pick?
thanks a lot
Click to expand...
Click to collapse
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
it would be funny if this one is better than the stock one (ie no multitouch/calibration issues)
I have a hunch they are all the same, but please don't hold me to that.
I got the one from ebay, and it worked find with no calibration issues at all.
Note that this is not an easy swap at all. The way this thing is built is pretty incredible. I found someone who tore one down on youtube, and it was split into something like 30 separate videos, and used them to figure it out. I was so surprised and excited that it still worked when I was done that I nearly dropped it again
Note that the one that I got DID NOT come with adhesive. I had to fabricate my own using scotch double stick tape and a knife, and it wasnt perfect. When I was done it seemed to stick well, but there were a few places I could see the tape sticking out slightly, and I'm sure since the seal wasn't perfect that lint would have eventually worked its way inside.
(I ended up sending it off to HTC for an overheating issue and faulty lock button, and elected for the advance replacement, so I ended up with a shiny new phone minus the battery cover they made me keep)
I wish you luck in the repair, I hope you've got a light touch and some heavy patience.
have you tested that digitizer for the dreadful multitouch issues before sending it to htc?
i would love to replace mine, it's getting on my nerves :/
It's so hit-and-miss,I just bought one replacement in lightake.com,I received it today,and I put it on my digitizer.
I bought one off ebay.. went w/a us seller "wholesalegadgetparts" so i could get it quickly the digitizer works fine
as far as adhesive to hold it to the "black frame" i used a 3M double stick tape (cut into very slim strips) that was fairly thin (if its to thick, it'll pop out beyond the aluminum frame when assembled) also used a drop or two of super glue on the top portion..
what sucked was after i got everything back together, my lcd went bad (guess i was mashing it a bit to hard when getting them to stick to the frame) so I bought one off ebay for around $50, seller was "smartlaptopparts" shipped from cali, so quick turn around, and did appear to be "oem"
screen is beautiful now, overall was very happy w/the purchases

Cracked screen

So my daughter just cracked the screen on my skyrocket, anyone know a reputable place to buy a replacement LCD screen? Or is anyone looking to sell one just pm me.
Ebay. And keep your daughter away from it. Lol
Sent from my SAMSUNG-SGH-I997 using XDA App
Man, screw eBay. I just looked and the lowest one was $650. You can get the whle new phone for $650 at Best Buy.
-Carlos
These guys might be able to do it, http://mobiletechvideos.mybigcommerce.com/
How did she break the Gorilla Glass ?!
the gorilla glass in the skyrocket is bad, you can find some videos about it in youtube
I ordered a new screen for $164 and replaced it myself. It's pretty easy to do
Sent from my SAMSUNG-SGH-I727 using XDA App
play1962 said:
I ordered a new screen for $164 and replaced it myself. It's pretty easy to do
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Sweet! Glad you got it fixed. I'll take that over warranty costs any day. Where did you get the screen from?
Got it from gounlock.com
Sent from my SAMSUNG-SGH-I727 using XDA App
its not gorilla glass is how she broke it...No where on Samsungs site or Cornings site do they say the skyrocket has it, and in fact i have contacted both and have gotten this response via email from samsung
“Thank you for your inquiry.
The Samsung Skyrocket (SGH-I727) does not feature the Gorilla glass. However, we assure you that all the components of the phone passed the Samsung quality assurance test and have been tested to withstand multiple different conditions”
So, Im hearing some people post on forums that the Digitizer is glued to the Glass and is separable, meaning the repair will cost way less than paying for a whole new digitizer + LCD + Glass assembly.
Can anyone confirm or deny this?
I have a nasty spider web break on my phone but can not afford to pay $160 when I paid $150 for the phone! (I know thats the contract price)
I'm a broke college student!
raheelanwar89 said:
So, Im hearing some people post on forums that the Digitizer is glued to the Glass and is separable, meaning the repair will cost way less than paying for a whole new digitizer + LCD + Glass assembly.
Can anyone confirm or deny this?
I have a nasty spider web break on my phone but can not afford to pay $160 when I paid $150 for the phone! (I know thats the contract price)
I'm a broke college student!
Click to expand...
Click to collapse
I don't think you can separate them and manage to reuse the circuitry, were talking less 1mm thick. I've replaced glass before, next time I'll probably send it to Sammy.
xiLLeNtz said:
How did she break the Gorilla Glass ?!
Click to expand...
Click to collapse
Is confirmed by Samsung there is no gorilla glass on the skyrocket!
Sky Ice Cream RC 7.3 Speed!!
I just dropped and broke the screen on my phone, how hard was it to replace the screen yourself?
r3dp0is0n2012 said:
Is confirmed by Samsung there is no gorilla glass on the skyrocket!
Sky Ice Cream RC 7.3 Speed!!
Click to expand...
Click to collapse
This has been known for quite some time now
amlwaycooljr said:
I just dropped and broke the screen on my phone, how hard was it to replace the screen yourself?
Click to expand...
Click to collapse
Replacing the glass is not too difficult if you know your way around computer hardware. What makes it a pain is how small all the connections and ribbon cable clasps are and ect.
Here's a link to a video tutorial on the Atrix to give you an idea of what you can expect. About an hour to replace.
amlwaycooljr said:
I just dropped and broke the screen on my phone, how hard was it to replace the screen yourself?
Click to expand...
Click to collapse
I got a used S2 skyrocket off ebay. Only the outer glass is cracked.
I saw this video: http://www.youtube.com/watch?v=mtiyU-RQUU0
Has anyone tried such a method and only changed the glass? (outer glass is cheap on ebay). Thx
gcretro said:
I got a used S2 skyrocket off ebay. Only the outer glass is cracked.
I saw this video: http://www.youtube.com/watch?v=mtiyU-RQUU0
Has anyone tried such a method and only changed the glass? (outer glass is cheap on ebay). Thx
Click to expand...
Click to collapse
Tried and failed... That is a nice video, but my understanding is that the Galaxy S II and III are different for repairs. The III you can replace just the top glass, but with the II it's easiest to replace the whole LCD and digitizer + glass. HTCs on the other hand have the top glass and digitizer as one replaceable unit.
I had this idea I could get the LCD lifted up and then use fishing line like floss to separate the glass and digitizer. But I didn't get that far. I didn't have enough heat and trying to remove the LCD, it busted. The OLED is like a brittle film and the adhesive used is crazy, so that method was doomed. I think if I had a different approach things might have gone better.
Now I have a worthless disassembled phone waiting on the prices of the whole LCD to come back down to sane levels. They were like $121,$131,$155, last check they're $200 on eBay. Makes me want to cuss!
I saw a video on YouTube where the top glass was busted open, not just cracked. I think it was a plain Galaxy S II. They used playing cards to dig in between the glass and digitizer layers. Then you clean off the digitizer and tape your new clean glass down and it would be fixed. I think if you could further break the top glass to pry it up and be able to dig in between the glass and the digitizer, that's how I would try to replace just the glass.
Ok, I dug in my web history and found the video I remembered: http://www.youtube.com/watch?v=judy-izOmKk
So in the video they had their screen/digitizer/glass removed from their phone chassis. I wouldn't go that far fearing you'd break the LCD. You may not have to do more than removing the battery before you get started.
Another thing the Skyrocket top glass needs this double sided clear tape. I presume this is because the digitizer is separate from the top glass and needs to be connected right to the glass instead of just held on with the double sided tape on the edges alone. I imagine that that could work if you pressed extra hard on your touches, but I don't know. I found this tape from EtradeSupply.com - they have a Youtube video I watched over and over. But shipping to the states is $15, adding to the expense.
Hope this helps anybody.
me too
I did the same thing. I got the old glass seperated with a hair dryer, but messed up some of the amoled screen and the glass was never fully flush after the reglue.
Super Annoying. :/ ending up buying the new screen kit on ebay for like 120. :/
Repair Follow-up
Yeah, I was able to get a new housing and screen assembly for my Skyrocket and all is well now. My phone is like new.
I did find some newer repair videos that use the playing card trick for removing just the cracked glass.
Samsung nexus glass repair i9250 part 1 - YouTube
Samsung nexus glass repair i9250 part 2 - YouTube
Samsung Nexus glass replacement follow up - YouTube
The quick version is that he says stick the phone in the freezer for a couple of minutes, because that will weaken the digitizer glue/tape. Then use your card to dig the glue out, pushing it out of the edge of the glass in a slow, lengthy process. He had success this way on a similar phone. I read elsewhere that Goo Gone cleaner could be used to remove any adhesive residue from the digitizer.
One thing I would worry about with this process is air bubbles in the new digitizer tape, since this other video has an industrial vacuum pressure machine as part of the final assembly process of the screens.
LCD and Digitizer touch the production workshop/Enterprise Solutions - YouTube
Related is an issue of dust, since a spec of lint or dust will cause an air bubble, as I just discovered applying a screen protector onto my Skyrocket.
So this little "$15" repair can add up with the digitizer adhesive and buying the Goo Gone and rubber gloves (which I didn't even use) and all of the rest. Just going for the new display comparatively is easy.

Broken screen

Ive cracked my screen and ive found i can buy a new screen and lcd for 169.99. or i can buy just the over glass for $20. I heard you can use a heat gun to seperate the glass and the lcd. Has anyone done this and can tell me if it works?
Sent from my SGH-I727R using xda app-developers app
Mostly likely the digitizer will get destroyed in the process. Buy the complete unit.
Someone said a few days ago he only replaced the glass but he had to break it in order to separate it, use the search I bet you'll find it quickly. If you can afford it take the whole thing, less chances of screwing up your phone, and you could always keep the old lcd for a test run with a glass only or in case you somehow manage to crack it again.
Still I'd suggest buying a screen protector once you fix your screen, costs less, barely noticeable and saves a whole lot of money and hassle.
kishke said:
Someone said a few days ago he only replaced the glass but he had to break it in order to separate it, use the search I bet you'll find it quickly. If you can afford it take the whole thing, less chances of screwing up your phone, and you could always keep the old lcd for a test run with a glass only or in case you somehow manage to crack it again.
Still I'd suggest buying a screen protector once you fix your screen, costs less, barely noticeable and saves a whole lot of money and hassle.
Click to expand...
Click to collapse
This. I cracked my screen and bought an entire new one for $160 via ebay. It took 10 minutes to take apart and install the new one and be back up and running. I also bought the Otterbox Defender, honestly...works like a charm. It's durable, nice, feels good and it doesn't feel as bulky as it looks. The only down fall about a case with a screen protector is that the Galaxy series has a screen that goes all the way to the edge of the phone (like most modern phones now) so hitting stuff on the VERY edge of the screen is more difficult because of the raised case.
Buy the screen and a protector and if you are still curious, buy the replacement glass for your broken screen and try it. Worst case, you're out 20 bucks and have a completely broken screen (would be out the other $160 for the new screen you'd have to buy if you mess up any way) or best case, you're out $20 bucks but have a new screen incase you ever break it again.
Unscrew the 7 screws on the back (one is above the sim slot, keep it separate as it's a different size) and once you take the back piece off, there's one small black screw holding the board to the screen. The phone is 3 pieces, screen, board and back piece, it's extremely simple. Just pop all the circuit things with your nail or whatever (there's like 6 total). You have to pry your headphone jack off as it's glued unless your new screen comes with one...doubt it.
someone posted they got sammy to replace it for 189, call sammy up and see what they say, i think thats a good price
Forget Glass
OFWGKTADGAF said:
Ive cracked my screen and ive found i can buy a new screen and lcd for 169.99. or i can buy just the over glass for $20. I heard you can use a heat gun to seperate the glass and the lcd. Has anyone done this and can tell me if it works?
Sent from my SGH-I727R using xda app-developers app
Click to expand...
Click to collapse
I repair phones and have replaced Lcd/digi assembly on both I727 and T989. No way you get that apart without busting the exiting assembly up. The cheapest part can be order via Ebay from China and you'll have to wait about two weeks for part. Or there's the company I used in San Fancisco at gounlock dot com that has it listed at $154 I believe. They have a listing on ebay under SkyStarTrade and I offered em $148 including shipping and the took it. I had the part in 3 days. Would highly recommend!!!!!!
I just got off the phone with Sammi Friday. The Rep quoted me $158 to replace the glass. So if they mess up the digitizer is on them. Cheaper than I was able to find the combo anywhere on line. So tomorrow my phone heads back to Sammi. I'll let you know in about three weeks how the service was and whether they honored their quote.
And exactly 8 days from the date that I shipped it to Sammi I have a my phone back. They replaced the LCD, bezel and glass for $158 as quoted. Not only that but they paid all shipping and used UPS 2nd day air both ways. And I'm still under warranty by having them take care of it. All in all couldn't be happier with the service. So if anyone needs the glass fixed my vote would go to Sammi.

Front Glass broken, replacement possible?

Hello,
I managed to drop my phone from not even 10cm(Gosh this thing is Slippy and fragile as F**k) on concrete and the Glass(not the Display!) broke.
So i was searching on the internet for glass replacement and found one on ebay,but i have also heard that it is quite difficult to remove the glass withou damaging the Display/Touchscreen.
If someone knows if it´s possible or if i need a whole new screen i would appreciate it.
Have Samsung replaced it for you. Bring your S6 back to them for repair. It will remove glass compatibility and job quality problems.
Mine was not even a week old and it fell from my fking pocket onto asphalt/road and part of the screen cracked. It's the damn bulging rounded glass on the sides which make the phone so fragile compared to, say, an S4 which had flat screen!
The retailer does not cover broken glass and was asking 200+ dollars to repair!!
Bought a tempered glass for $16 and it's kinda usable although painful to look at now. And the fking dents on the sides of the aluminum case make it a more painful experience considering I invested all my money on the phone and was waiting to buy a cover for it. Wished I bought the $50 clear view cover when I got the S6
The only place in my area that can replace stuff like this is my provider vodafone.
But i dont really want to spend 200€ to have my Display replaced.
Bite the bullet and have the glass replaced then buy a protective case.
It is difficult to replace only the glass for your s6. I suggest getting a Samsung Galaxy s6 screen replacement with digitizer.
Bump..
How much is this front glass worth? A place here in Grand Rapids wants $275. See my g920p sceen isnt cracked but got smashed in a bit and glass under it is crushed there isnt any cracks in the top layer. But few glass chips floating around the front lens. The Phone did started seperating and I put a drop of glue on edge of screen and frame and held it in and its a still truckn. It works fine and I do got insurance with 200$ deductible for a refurbished phone from Phone Claim. Hey any idea how long that takes?. Replace the phone or is there another option out there to get it fixed?? I dont have any of those heating tools and not gonna make this my first replacment. Now the wifes S5 I may try it for a bit of exprience get things I need when its broke.

Question Cracking Crease

Hey all,
I bought my flip the day it came out and have developed some cracking and peeling on the crease of the screen. Is this something I can easily fix with a new screen protector or is this something I need to call Samsung for and use the warranty?
Wowsers, may I ask how that happened? I'd get onto Samsung. That's what the warranty is for after all!
This is just normal use. I don't do anything crazy. I have a desk job. It just started cracking one day and keeps getting progressively worse.
Hi i had the same problem. i saw a crack in the protector horizontaly in the crease right side 2 weeks ago(i bought zflip 3 on end of august) with a gray reflect on White color of the screen.
I decided to remove the protector (you tube vidéo helps to it and furthermore in the french stores all Zflip 3 demo units had no protector on it like flip 1). I bought an hydrogel protector taylor cutted by machine.
The bad big surprise is that the Samsung original protector is not an hydrogel one but a simple sticker like S20 models !! It's a shame for a foldable and the risj to damage the screen is high.
Now i have my z flip 3 with hydrogel that i managed to put myself because the vendor was not sure..... The feeling is better, feels stronger and i love typing text on it after.
I have 2 micro bubbles left but it's far better than to have a cut in the plastic.

			
				

			
				
darkraiderfan said:
Hey all,
I bought my flip the day it came out and have developed some cracking and peeling on the crease of the screen. Is this something I can easily fix with a new screen protector or is this something I need to call Samsung for and use the warranty?
Click to expand...
Click to collapse
Update: I got a new screen protector on Amazon and everything is perfect now. Removal and replacement wasn't much different than a standard phone.
Well done!!!, the phone is better after, the screen seems stronger, typing is easier and its protected!!!
darkraiderfan said:
Update: I got a new screen protector on Amazon and everything is perfect now. Removal and replacement wasn't much different than a standard phone.
Click to expand...
Click to collapse
Is it true when you replace the original protector with something else and it is not done by Samsung, warranty will be void?

Categories

Resources