Related
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app
agk.ganesh said:
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.
xu3sno said:
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app
Click to expand...
Click to collapse
androidck said:
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.
Click to expand...
Click to collapse
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..
agk.ganesh said:
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..
Click to expand...
Click to collapse
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2
ibub said:
Are you sure that you are booting into cwm v5.0.2.0?
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Click to expand...
Click to collapse
+1
CM10.1.6 worked
ibub said:
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
mns123 said:
+1
Click to expand...
Click to collapse
Thanks.
agk.ganesh said:
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
Thanks.
Click to expand...
Click to collapse
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2
Thanks
ibub said:
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I will try installing now new recovery and then new ROM.
Very glad to see the support from you guys... Thanks ibub and all..
[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:
Thanks
akiratoriyama said:
[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:
Click to expand...
Click to collapse
Thanks @akiratoriyama.
I have upgraded CWM recovery 6.xx through CWM 5.0.2.0 and successfully installed MukulSoni's Kitkat ROM.
And enjoying eating kitkat..
Thanks all..
Hello all,
2 days ago when on vacation i decided to temper around with my OnePlus one that i recently bought (have bought the Chinese version but it was already rooted and had cyanoged mod on it)
All was fine until i decided to flash Paranoid Android and i posted a question here, about how to bypass the always apearing CyanogenMod Simple Recovery tool.
After trying what everyone suggested and not getting result i had 1 last thing that someone suggested:
http://forum.xda-developers.com/showthread.php?p=54717885
If you still have not fixed this issue, for some reason when I was flashing my recovery it would NOT work for the life of me until I changed the name of the custom recovery file to 'recovery.img'. Everytime I flash (for example) openrecovery-twrp-blah-bacon.img it would say success, but it kept rebooting into CM fastboot mode.
Click to expand...
Click to collapse
I misunderstood and i renamed the .zip file from paranoid sources into recovery.img and flash (Kernel) it via some app from play store, i thin it was TRWL
Now my phone is stuck into loading faze and the only thing i can do is enter Fastboot mode.
I tried to do a:
fastboot erase cache
But it did not work, its still stuck in loading and will not do anything.
Could you help me out ? I have a really bad feeling i just lost my phone due to hurrying and not having a pc around to read more.
You can try to fastboot flash recovery(original or proper one that works) but I don't know the exact commands.
In the first case where your recovery would not switch from CM to TWRP/CWR was because you had "Update CM Recovery" enabled in Developer Options. If you ticked that off, then it would have replaced CM Recovery. Its confusing yeah.
So wait... you renamed the .zip to a .img? Thats not good. But at least you can enter fastboot mode so thats at least something. Is your bootloader still unlocked? Are you able to boot into recovery mode? Try fastboot boot <name-of-recovery-for-twrp>.img and see if you can get into recovery.
If you can then perform a wipe and then enable adb sideload within TWRP and then type,
adb sideload <name-of-zip>.zip and then after its done sideloading, reboot
Thanks for the answer.
I managed last night out of 10 flash resets to get the Custom Recovery Tool to booth up.
I was about to give up when i saw it boot and i immediately flashed the CM .zip i had on the phone from last time.
I even managed to get Paranoid android to flash and im very happy.
Thanks for the help
vidockq said:
Thanks for the answer.
I managed last night out of 10 flash resets to get the Custom Recovery Tool to booth up.
I was about to give up when i saw it boot and i immediately flashed the CM .zip i had on the phone from last time.
I even managed to get Paranoid android to flash and im very happy.
Thanks for the help
Click to expand...
Click to collapse
I'd appreciate it if we helped give us a thanks.
Sent from my One using Tapatalk
Hi all,
This is not the right forum, but I didn't see one specifically for Spark X models, so I'm sorry.
A friend of mine has a Wileyfox Spark X device, which was bootloader unlocked, had TWRP 3.0.2 installed and was running on the original firmware (6.0.1) but rooted and xposed installed.
Now an update came out for Android 7. To update the device, I put back the original firmware and recovery, started doing the upgrades and all went smooth.
Device is up and running on Android 7, however when I now try to install TWRP again, it won't work.
(fastboot flash the TWRP recovery (same version as before - 3.0.2) seems to work ok. I then go to pull the battery after flashing, put battery back, and start recovery by pressing vol down and power.
I see the device going to a black screen, then reboot and keeps doing this as long as I keep the vol down pressed. Once I release the device continues normal boot and goes into Android.
I assume this has to do with a change in Android 7?
Seems I can get TWRP working again, if I flash the original boot image, however then ofcourse the Android boot doesn't work anymore. (additionally once in TWRP, it seems /system cannot be mounted anymore and TWRP thinks no system is installed)
So in short, I believe I should get a newer TWRP version that is compatible with Android 7. I tried the different versions available on twrp.me (up to 3.1.1.0) however to no avail. None works with the latest android.
As such, the device is able to run in android 7, but without root. (no adb root option in developer options, adb root doesn't work either, kingroot etc also no go)
Does anyone have any options that I can still try? or could help me with a proper TWRP version that should work? (I did find some TWRP recoveries on 4pda (russian website) for Spark + that claim to be for Android 7, but those didn't work either))
Thanks !
@Asansi
I'm sorry I can't help you, but may I ask how you rooted the phone? I can't get mine to be properly rooted.
I can help you with any problem. I'm a senior person in that model since I have been using it ever since. If you could like
Sent from my Wileyfox Spark using XDA
HackerAce said:
I can help you with any problem. I'm a senior person in that model since I have been using it ever since. If you could like
Sent from my Wileyfox Spark using XDA
Click to expand...
Click to collapse
Apologies for ressurecring a zombie thread but, OP has a spark X and you have a Spark, so it would appear that you SENIOR person in that model failed at the very first hurdle.
Am still wonderng if there is an sign of a 7.0 compatible twrp for spark X? Don't suppose anyone has a link to the latest Spark X firmware either?
TWRP versions
Asansi said:
Hi all,
This is not the right forum, but I didn't see one specifically for Spark X models, so I'm sorry.
A friend of mine has a Wileyfox Spark X device, which was bootloader unlocked, had TWRP 3.0.2 installed and was running on the original firmware (6.0.1) but rooted and xposed installed.
Now an update came out for Android 7. To update the device, I put back the original firmware and recovery, started doing the upgrades and all went smooth.
Device is up and running on Android 7, however when I now try to install TWRP again, it won't work.
(fastboot flash the TWRP recovery (same version as before - 3.0.2) seems to work ok. I then go to pull the battery after flashing, put battery back, and start recovery by pressing vol down and power.
I see the device going to a black screen, then reboot and keeps doing this as long as I keep the vol down pressed. Once I release the device continues normal boot and goes into Android.
I assume this has to do with a change in Android 7?
Seems I can get TWRP working again, if I flash the original boot image, however then ofcourse the Android boot doesn't work anymore. (additionally once in TWRP, it seems /system cannot be mounted anymore and TWRP thinks no system is installed)
So in short, I believe I should get a newer TWRP version that is compatible with Android 7. I tried the different versions available on twrp.me (up to 3.1.1.0) however to no avail. None works with the latest android.
As such, the device is able to run in android 7, but without root. (no adb root option in developer options, adb root doesn't work either, kingroot etc also no go)
Does anyone have any options that I can still try? or could help me with a proper TWRP version that should work? (I did find some TWRP recoveries on 4pda (russian website) for Spark + that claim to be for Android 7, but those didn't work either))
Thanks !
Click to expand...
Click to collapse
I've tried TWRP 3.0.2-0 (i.e. latest from https://dl.twrp.me/porridgek3/): it flashes Ok but it won't boot up afterwards. I've tried 3.0.2-0 but as you say "it seems /system cannot be mounted anymore and TWRP thinks no system is installed)". After letting it finish, Root Checker (not unsurprisingly) says that device is not rooted. Have you progressed with this issue? BTW I've emailed TWRP Support (from their web page) asking if they have a working version.
Same problem here, It's pretty annoying. My sister's getting this same phone (on Android 6) soon so I might just make a full backup with TWRP on it and somehow restore it on my phone.
Systemless Root
I can't decide whether to try the rooting method given in https://android.stackexchange.com/questions/160130/how-do-i-install-systemless-supersu-in-samsung
The method is:
Sometimes the need for a systemless installation of SuperSU is not detected by the installation script, to force this to occur follow the following steps.
Start TWRP 3.0 or higher on the device
Go to Advanced - Terminal
In the terminal, enter echo SYSTEMLESS=true>>/data/.supersu
Press Enter
Exit to the TWRP main menu
Flash the current SuperSU as per normal
When flashing SuperSU, you should see in the TWRP recovery log screen mentions of system-less installation and patching of the boot image.
Has anyone had experience of this method?
Resurrection! This post shall LIIIIVE!
No, seriously tho, does anyone have any updates on the issue? Or could at least point me in the right direction to root a Wileyfox Spark X? At this point, any help is much appreciated, since I have not been able to get ANY method working for me.
Thanks a lot
Sent from my Wileyfox Spark X using XDA Labs
Systemless Root
ScreamingSteve said:
Resurrection! This post shall LIIIIVE!
No, seriously tho, does anyone have any updates on the issue? Or could at least point me in the right direction to root a Wileyfox Spark X? At this point, any help is much appreciated, since I have not been able to get ANY method working for me.
Thanks a lot
Sent from my Wileyfox Spark X using XDA Labs
Click to expand...
Click to collapse
Steve,
Have you tried the method detailed in post #7?
johnaaronrose said:
Steve,
Have you tried the method detailed in post #7?
Click to expand...
Click to collapse
I am afraid not, since I can't install TWRP. One info would help me out a lot tho: would an Android-Downgrade (from 7.0 to CM13) help with installing TWRP and rooting?
Steps taken earlier:
quite literally everything (that would make sense even remotely)
Steps taken today:
- Downloading TWRP 3.2.1-0 (https://twrp.me/wileyfox/wileyfoxsparkx.html)
- fastboot-unlocking the bootloader (no issues)
- trying to install TWRP (no issues there either)
- when trying to reboot straight to recovery, I don't get past the bootlogo, suggesting to me that either the install or TWRP was corrupted.
Any help one might get?
Thanks a lot?
TWRP
ScreamingSteve said:
I am afraid not, since I can't install TWRP. One info would help me out a lot tho: would an Android-Downgrade (from 7.0 to CM13) help with installing TWRP and rooting?
Steps taken earlier:
quite literally everything (that would make sense even remotely)
Steps taken today:
- Downloading TWRP 3.2.1-0 (https://twrp.me/wileyfox/wileyfoxsparkx.html)
- fastboot-unlocking the bootloader (no issues)
- trying to install TWRP (no issues there either)
- when trying to reboot straight to recovery, I don't get past the bootlogo, suggesting to me that either the install or TWRP was corrupted.
Any help one might get?
Thanks a lot?
Click to expand...
Click to collapse
The only version that I had success with was 3.0.2 from https://dl.twrp.me/porridgek3/"]https://dl.twrp.me/porridgek3/[/URL]
Even then, It's all hit & miss getting into TWRP:
1. If I do anything after flashing (e.g. booting as normal), I have to go into fastboot & flash TWRP again.
2. Once I have flashed TWRP (i.e. still in fastboot mode), I can't leave fastboot mode. Also, the phone will not switch off unless I remove the battery and put it back in after approx 10 seconds.
3. Even then it often refuses to load TWRP i.e. it goes into the Android Boot menu.
AlwaysLivid suggested that you can boot to TWRP by executing "fastboot boot recovery.img" (where recovery.img is the TWRP img file renamed) on MSDOS Prompt / Terminal according to whether you're using Windows or a Linux distro (e.g. Ubuntu which I use). Presumably this would be after you have taken the battery out for a few seconds before inserting it again and have then booted into the appropriate mode with the Volume Down & Power buttons held down.
johnaaronrose said:
The only version that I had success with was 3.0.2 from https://dl.twrp.me/porridgek3/"]https://dl.twrp.me/porridgek3/[/URL]
Even then, It's all hit & miss getting into TWRP:
1. If I do anything after flashing (e.g. booting as normal), I have to go into fastboot & flash TWRP again.
2. Once I have flashed TWRP (i.e. still in fastboot mode), I can't leave fastboot mode. Also, the phone will not switch off unless I remove the battery and put it back in after approx 10 seconds.
3. Even then it often refuses to load TWRP i.e. it goes into the Android Boot menu.
AlwaysLivid suggested that you can boot to TWRP by executing "fastboot boot recovery.img" (where recovery.img is the TWRP img file renamed) on MSDOS Prompt / Terminal according to whether you're using Windows or a Linux distro (e.g. Ubuntu which I use). Presumably this would be after you have taken the battery out for a few seconds before inserting it again and have then booted into the appropriate mode with the Volume Down & Power buttons held down.
Click to expand...
Click to collapse
Thanks a lot, I'll try your method, the explicit call to boot the TWRP image could really help.
Thanks for your extended explanation tho, showed me some new ways to eventually get this stuff to work.
Sent from my Wileyfox Spark X using XDA Labs
johnaaronrose said:
I can't decide whether to try the rooting method given in https://android.stackexchange.com/questions/160130/how-do-i-install-systemless-supersu-in-samsung
The method is:
Sometimes the need for a systemless installation of SuperSU is not detected by the installation script, to force this to occur follow the following steps.
Start TWRP 3.0 or higher on the device
Go to Advanced - Terminal
In the terminal, enter echo SYSTEMLESS=true>>/data/.supersu
Press Enter
Exit to the TWRP main menu
Flash the current SuperSU as per normal
When flashing SuperSU, you should see in the TWRP recovery log screen mentions of system-less installation and patching of the boot image.
Has anyone had experience of this method?
Click to expand...
Click to collapse
Finally, your advice with "Fastboot boot twrp.img" worked magic!
Got twrp installed, but now I'm facing the same problem as you with the systemless root. I'll dig around a little and see what I can find.
Have some experience in flashing Rom's in my time but tried to flash Carbon Rom on my 6 yesterday and got myself into a pickle.
Unlocked and installed TWRP Blue Spark and Root using the Toolkit.
When I was back in Twrp I installed the Rom and TWRP again and rebooted.
That's where the problem started. When it rebooted into TWRP I could not find where the GAPPS was. The directory structed seemed very strange. SDCARD was there but nothing in it. Could not find the user directory at all.
Carbon would not come out of bootloop.
Tried to fastboot stock and then was left with a blank screen and a blue light only.
Only the MSM unbrick tool helped me out.
Can someone see what I did wrong here in not being able to find the gapps?
Thanks
K
divvykev said:
Have some experience in flashing Rom's in my time but tried to flash Carbon Rom on my 6 yesterday and got myself into a pickle.
Unlocked and installed TWRP Blue Spark and Root using the Toolkit.
When I was back in Twrp I installed the Rom and TWRP again and rebooted.
That's where the problem started. When it rebooted into TWRP I could not find where the GAPPS was. The directory structed seemed very strange. SDCARD was there but nothing in it. Could not find the user directory at all.
Carbon would not come out of bootloop.
Tried to fastboot stock and then was left with a blank screen and a blue light only.
Only the MSM unbrick tool helped me out.
Can someone see what I did wrong here in not being able to find the gapps?
Thanks
K
Click to expand...
Click to collapse
Likely the phone was encrypted
divvykev said:
Tried to fastboot stock and then was left with a blank screen and a blue light only.
Click to expand...
Click to collapse
For me this happened a few times, including when I tried to 'fastboot boot' a wrong image or some latest bluespask Twrps. This is the state when the the phone has hung trying to execute something. The remedy is to hold the power button pressed for something like 10 seconds and the phone will switch off (this is a hardware feature so shlould not fail). After that I go to fastboot normally - press volUp+Power for a few seconds till the fastboot message. Also, make sure that you are not charging, as this seems to have prevented me going to fastboot once.
Hello!
I had recently gotten a Xiaomi Redmi Note 6 Pro brand new, and its been working fine for a while, but recently I ran into an issue: Namely, it often refuses to turn the screen on. The phone still makes sounds, it can receive calls, hell, it can even play music with no issue whatsoever, other than the fact that the screen itself appears dead. Once in a while the display turns on, and it works perfectly fine for as long as the screen is on, if I turn off automatic sleep, it can just run indefinitely like it usually would. When turning the phone off and back on, there are no boot animations, just a blank screen (sometimes they do appear, however rarely and I haven't noticed a pattern as to when they actually work as intended).
I figured it was an issue with MIUI 11, specifically 11.0.2.0, so I decided to flash a custom ROM. When attempting to enter fastboot mode, I am greeted by a blank screen, identical to the one that is present while booting up, but ADB recognizes the device just fine and I managed to unlock the bootloader despite no visual feedback from the device itself (I did manage to load into a fastboot mode with the Soviet android logo thing, but that was once, and it would revert back to being blank after 10 seconds). It had done a factory reset, and the problem persisted, it took me a good 5 minutes of spamming the power button for the screen to come back on, and the issue wasn't solved. I flashed official TWRP recovery on the unlocked device, and the ADB console reported the flashing as successful, however I have no way of accessing the bootloader or the recovery. (Not even the stock recovery would work, i tried that before I even touched the bootloader, it would just boot to system with a blank screen, and the phone would remain on, however largely unusable).
Now, I am a complete noob for these things, this is my first thread here, and I have no idea what could be causing the issue. Would flashing an older MIUI 10 stock ROM via MiFlash fix the issue? Or is this some sort of a hardware problem, although it doesn't seem that way as the phone was never dropped or exposed to the elements. I tried leaving it to completely discharge and then fully recharge, however that did precisely nothing. If you could look into this issue and help me find a solution, it would be greatly appreciated!
Thanks in advance!
Hey!
I think you should flash stock ROM from the Flash tool selecting clean_all_and_flash from fastboot mode
Nitin Rai said:
I think you should flash stock ROM from the Flash tool selecting clean_all_and_flash from fastboot mode
Click to expand...
Click to collapse
Hey, thanks a lot for replying!
That's what I thought I'd have to do, but I have a question: should I flash the MIUI 10 ROM or 11? Would downgrading it like that cause any issues? The only MIUI 11 ROM available on Xiaomi site is the OTA update that caused the issue. Also, in the meantime I managed to get into proper fastboot with ADB commands and flashed an AOSP extended Android 10 ROM, the issue is still there but I can now consistently get into TWRP either by an ADB terminal or by rebooting into recovery directly from the ROM with the power menu. I had downloaded an MIUI 10 recovery ROM from the Mi Community forums, can I flash that through TWRP or would it be safer to use MiFlash to flash the fastboot ROM? Do I have to flash the stock recovery before using the tool or will it just work with the TWRP already present on the device?
TacticalDisadvantage said:
Hey, thanks a lot for replying!
That's what I thought I'd have to do, but I have a question: should I flash the MIUI 10 ROM or 11? Would downgrading it like that cause any issues? The only MIUI 11 ROM available on Xiaomi site is the OTA update that caused the issue. Also, in the meantime I managed to get into proper fastboot with ADB commands and flashed an AOSP extended Android 10 ROM, the issue is still there but I can now consistently get into TWRP either by an ADB terminal or by rebooting into recovery directly from the ROM with the power menu. I had downloaded an MIUI 10 recovery ROM from the Mi Community forums, can I flash that through TWRP or would it be safer to use MiFlash to flash the fastboot ROM? Do I have to flash the stock recovery before using the tool or will it just work with the TWRP already present on the device?
Click to expand...
Click to collapse
No, I had downgraded from 11 before when I didn't had the miui 11 rom.zip I had miui 10 as backup. There is a thread for that anti rollback thing you can see that for more information. I would recommended you to go with the latest one if you are going to download or just flash the old one if you already have it
Here is the link for the anti rollback: https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219