[Q] Help Needed: Unbrick my P500! - Optimus One, P500, V Q&A, Help & Troubleshooting

Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh

Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app

agk.ganesh said:
Hi,
I have put more than 12 hours of my time, before creating this thread. I have tried things, but still struck, so thought to post it in a new thread. Thanks for all your time.
Currently struck in,
fastboot mode started udc_start()
I tried, fastboot erase recovery -> fastboot flash recovery recovery.img -> fastboot reboot (successfully). But it still struck at same place after reboot.
I tried with different recovery images, but still the same observation. I tried to boot by key combination (volume down+home+power), still same observation.
Earlier, I installed ROM manager through google play and installed CWM recovery, version 5.xxx (which I feel now is a mistake), as I tried to install CM11 from MukilSoni, which needs CWM version 6.xx +. I am able to go into recovery and select CM11 image through CWM and proceed with install steps. But, after initial selection in CWM (like app install, etc) it rebooted and went into fastboot mode.I checked the log, it ended with some return error 7.
Then, I tried to Google and check how to recover from fastboot mode, but all failed. I didnt tried KDZ method, but thought to hear from you guys before making it more messy.
Glad, if I get any help and appreciate it.
Thanks for reading it and your time.
Regards,
Ganesh
Click to expand...
Click to collapse
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.

xu3sno said:
Did you ever try pull out the battery, reinsert, reboot system with 3 buttons combination? I got several fastboot mode as you're facing, and the system works just fine using above method.
I think you got just soft brick. Please, keep the device stay untouched until someone with such expertise to solve the problem will guide you. I think @akiratoriyama can share his bad experience bricking his lovely p500.
Wish you luck.
PS.
You must to press three buttons a bit longer, do not release it, until recovery mode appearing. Otherwise fastboot mode or blank screen showing instead.
Sent from my Optimus One using xda app-developers app
Click to expand...
Click to collapse
androidck said:
Two years ago I bricked my phone also after using ROM manger. Though I will never ever use this or similar tools again. But at least, if I remember correctly, I could revive my phone with the "fastboot erase recovery" method http://forum.xda-developers.com/showthread.php?t=1088046. But since you failed is seems to be another problem. I am not a fastboot expert , but since you bricked your phone with ROM manager too, I wanted to share my success story with above mentioned method and installing AmonRa recovery. So maybe you will give it a second try? All I can remember is, that it is extremely important to follow the instructions exactly.
Click to expand...
Click to collapse
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..

agk.ganesh said:
Thanks @xu3sno & @androidck
I am also getting help from mukulsoni & others in Official CM11 version 10 thread.
I am able to go into the flash tool (pointed by mukulsoni, http://forum.xda-developers.com/showpost.php?p=49567169&postcount=45)
and able to go 'Select kernel to hotboot' with recovery.img (CWMod-6.4.0.6-Jan16)
But rebooting by HOME+Volume DOWN+POWER --> goes into CWM recovery of v5.0.2.0 (which i installed initially)
I am thinking, what to do next.
I will keep my progress posted here.
Thanks for listening..
Click to expand...
Click to collapse
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2

ibub said:
Are you sure that you are booting into cwm v5.0.2.0?
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Click to expand...
Click to collapse
+1

CM10.1.6 worked
ibub said:
Are you sure that you are booting into cwm v5.0.2.0? Version is listed at the top. If that is true, then either the flash tool failed to flash cwm v6.4.0.6, or you have chosen the wrong recovery.img. This can easily happen since they all have the same name. Try to flash it again, but make sure that you use the correct image.
Also, I believe that you may not have any rom installed, or existing rom might be corrupted. So you may want to flash a cm-9 or cm-10.x rom first, just to stabilize and to be sure that you are healthy. Those can be flashed using cwm 5.0.2.0. I can post a link or two, if you'd like.
Edit: Here is a link to cm-10.1.6:
http://jenkins.androidarmv6.org/view/All/job/android/597/
Gapps already included.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
mns123 said:
+1
Click to expand...
Click to collapse
Thanks.

agk.ganesh said:
Thanks @ibub for your helping hand.
I will check why recovery image not upgrading as expected. (I didn't manually download CWM5.xx version to my PC. I got it via ROM manager app, so i hope I haven't chosen wrong image)
Yes, I got CM10.1.6 from your link and installation went successfully and able to boot up..
But, it is very slow. (May be it will take some time?!) I will check it.
Between, @mukulsoni advised to install CWM6.xxx via CWM5.0.2.0. I will check how it goes.
Thanks.
Click to expand...
Click to collapse
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2

Thanks
ibub said:
Yeah, I chose to post that link only to make sure that your phone is healthy. Now you can install any recovery/rom that you want. If your volume keys are broken, I suggest that you flash to twrp recovery. It's touch driven.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I will try installing now new recovery and then new ROM.
Very glad to see the support from you guys... Thanks ibub and all..

[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:

Thanks
akiratoriyama said:
[rant] NEVER EVER USE KDZ. PERIOD. :crying: [/rant]
Best of luck on your ROM journey :good:
Click to expand...
Click to collapse
Thanks @akiratoriyama.
I have upgraded CWM recovery 6.xx through CWM 5.0.2.0 and successfully installed MukulSoni's Kitkat ROM.
And enjoying eating kitkat..
Thanks all..

Related

[Q]Bootloader>Recovery, Hangs at Google boot.

Attempted to flash update to current CM 7 Nightly build, from Nightly10. When doing so, Bootloader>Recovery(System hangs on Google load screen), Battery is then pulled. Attempts are made without SIM card. Also initiated with ROM Manager v3.0.0.7 +Fix Permissions, with same results.
No luck with returning to previous ROM, or cleaning Cache and Dalvic-cache for same reason.
All other ROM flashing attempts have been flashed on my Nexus S, great success.
Side Note: CM 7 Nightly10 is running great! Boots/Loads with no issue.
Red Fox said:
Attempted to flash update to current CM 7 Nightly build, from Nightly10. When doing so, Bootloader>Recovery(System hangs on Google load screen), Battery is then pulled. Attempts are made without SIM card. Also initiated with ROM Manager v3.0.0.7 +Fix Permissions, with same results.
No luck with returning to previous ROM, or cleaning Cache and Dalvic-cache for same reason.
All other ROM flashing attempts have been flashed on my Nexus S, great success.
Side Note: CM 7 Nightly10 is running great! Boots/Loads with no issue.
Click to expand...
Click to collapse
dont use rom manager, rom could be corrupted while downloading. download it manually then flash from recovery.
simms22 said:
dont use rom manager, rom could be corrupted while downloading. download it manually then flash from recovery.
Click to expand...
Click to collapse
What could cause, or any suggestion on how to fix/pass the system freeze on: Power+VolumeUP>Recovery= Google ... .. ... (snooze, thinking, snooze)
Much help is greatly appreciated, updating to the latest and greatest is inspiring.
Sent from my Nexus S
Red Fox said:
What could cause, or any suggestion on how to fix/pass the system freeze on: Power+VolumeUP>Recovery= Google ... .. ... (snooze, thinking, snooze)
Much help is greatly appreciated, updating to the latest and greatest is inspiring.
Sent from my Nexus S
Click to expand...
Click to collapse
ahhh, i misunderstood you first. try flashing the recovery again.
simms22 said:
ahhh, i misunderstood you first. try flashing the recovery again.
Click to expand...
Click to collapse
I just tried the recovery OS ROM, no progress, still freezing the same. Could you please explain this recovery, that you suggest?
If the system doesn't make it to the next stage/screen, w/the android. I feel like something is missing to pass go, and collect $100 big one's, LOL!
Sent from my Nexus S
Note: I also attempting this through, ROM Manager. As Bootloader triggers same results. ROM's are all DL'ed from http://mirror.teamdouche.net/?device=crespo (Blank Stare)
Sent from my Nexus S
adb update:
cmd
cd c:\androidsdk\tools
fastboot flash recovery recovery.img
ENTER
Figured it out through trial, and error.
Hope this helps fellow XDA members.
Thanks for your efforts, and taking the time to help with this issue.
Sent from my Nexus S
Red Fox said:
adb update:
cmd
cd c:\androidsdk\tools
fastboot flash recovery recovery.img
ENTER
Figured it out through trial, and error.
Hope this helps fellow XDA members.
Thanks for your efforts, and taking the time to help with this issue.
Sent from my Nexus S
Click to expand...
Click to collapse
I do have exactly the same problem.
Which recovery.img did you flash?
stiefa00 said:
I do have exactly the same problem.
Which recovery.img did you flash?
Click to expand...
Click to collapse
Here is the recovery.img that I flashed:
http://www.megaupload.com/?d=C933QJOO
Same recovery.img used when rooting, here is the source:
http://theunlockr.com/2010/12/17/how-to-root-the-samsung-nexus-s/
Sent from my Nexus S
Another alternative, Terminal Emulator:
- install recovery to sd-card(no folders)
- Terminal:
su
flash_image recovery /sdcard/name-of-recovery.img
-=Edit=-
Phone should pause for a second and then show you a new blank line. Turn it off and back on. Holding down VolumeUp and Power to ensure it flashed correctly. Done.
Sent from my Nexus S
thx, got it!
Dunno if mine is the same problem.
My recovery seems to "reset" itself after every reboot. I have done it from ROM manager also also fastboot.
1. I flash the recovery
2. reboot
3. recovery comes up fine
4. reboot again, it show me this triangle sign with a exclamation mark inside.
So i need to fastboot/ROM manager everytime I want to go into the clockwork recovery.
ykphuah said:
Dunno if mine is the same problem.
My recovery seems to "reset" itself after every reboot. I have done it from ROM manager also also fastboot.
1. I flash the recovery
2. reboot
3. recovery comes up fine
4. reboot again, it show me this triangle sign with a exclamation mark inside.
So i need to fastboot/ROM manager everytime I want to go into the clockwork recovery.
Click to expand...
Click to collapse
Dude, this is discussed in multiple threads already.
The OTA 2.3.1 and 2.3.2 updates place a new script in the /etc folder that checks the crc on your recovery image at every bootup. If it fails, a backup copy of stock replaces it.
If you want to stay on Clockwork, you need to rename the file /etc/install-recovery.sh to something like /etc/install-recovery.sh.bak
Ah ok thanks! I din know where or what term to search for this.

[Q] [i9023] Blank/Black screen in recovery

Hey everyone,
Basically I was trying to flash a new ROM onto an old Nexus S of mine and when I tried to boot into recovery there was just a black screen. I pressed the power button and a single line saying "Clockwork mod Recovery" and the version number popped up. I assumed that the recovery must've been corrupted so I erased it and installed the latest version using fastboot which seemed to work fine.
Now whenever I try to boot into recovery I just get a blank screen with nothing else. I've tried using other recovery images such as twrp but the same problem happened, I just get the background wallpaper/image and nothing else.
I searched the forums and apparently people were having this issue earlier on when the i9023 was first released but now most custom recoveries are supposed to work with both i9020 and i9023.
Also the touch buttons light up and vibrate whenever I touch them when I'm in recovery mode.
Any help to this problem would be greatly appreciated as atm I have an old ROM which is buggy as hell and I need to get rid of it.
Cheers!
I had the same Issue. If you can boot into the rom, you can try to download the rommanager-app and install the recovery from there.
Hey I tried that already that and instead of booting into recovery it just went into the bootloader and said "No Recovery or Bootloader found".
Any other ideas?
Did you clicked the first point in rommanager? Install recovery, or you only hit the second button reboot into recovery?
Sent from my Full Android on Crespo using XDA App
Hey
I have the i9023 and I install rom manager. install CWM and if I reboot into recovery it works and I get in to CWM recovery.. but after reboot into os.. if I go into Rom manager and reboot to recovery it dont work? I just get the android figur and a "!".. then I just can Power + vol up and I'm in bootloader recovery..
Do I have to install CWM every time i want to use it? and can't I access CWM on boot op ?
sorry for my bad English
Normaly you have to flash the recovery only once.
Try to flash the newer clockwork-recovery with fastboot.
http://forum.xda-developers.com/showthread.php?t=988686
Alfiedk: You need to get rid of this file:
/system/etc/install-recovery.sh
As it re-installs the stock recovery every boot.
I think you can download any custom ROM for your phone, and flash it in CWM recovery, this will also solve the problem
Edit: Did you unlock the phone? Have you tried fastboot oem unlock?
Sent from my SNES
bedalus said:
Alfiedk: You need to get rid of this file:
/system/etc/install-recovery.sh
As it re-installs the stock recovery every boot.
I think you can download any custom ROM for your phone, and flash it in CWM recovery, this will also solve the problem
Edit: Did you unlock the phone? Have you tried fastboot oem unlock?
Sent from my SNES
Click to expand...
Click to collapse
I havent unlock my phone, but I can get in to bootloader is it then necessary to unlock ?
I try to delete the /install-recovery.sh
Yes you need to unlock your bootloader, if you dont want to reflash it all the time.
Sent from my Full Android on Crespo using XDA App
Xziped said:
Yes you need to unlock your bootloader, if you dont want to reflash it all the time.
Sent from my Full Android on Crespo using XDA App
Click to expand...
Click to collapse
Then it must be unlock as default.. I havent unlock it.. just delete the install install-recovery.sh and it works every time now.
now I just have to find a ROM to try..
Xziped said:
Did you clicked the first point in rommanager? Install recovery, or you only hit the second button reboot into recovery?
Sent from my Full Android on Crespo using XDA App
Click to expand...
Click to collapse
Yes I made sure I selected install clockwork mod. Like I said the problem isn't the same when I do this, instead of a blank screen, when I boot into recovery it goes straight to fastboot and tells me that I don't have a recovery image installed at all...
Simultaneity said:
Yes I made sure I selected install clockwork mod. Like I said the problem isn't the same when I do this, instead of a blank screen, when I boot into recovery it goes straight to fastboot and tells me that I don't have a recovery image installed at all...
Click to expand...
Click to collapse
what happens when you try to temporary boot into the recovery?
instead of "fastboot flash recovery recovery.img", try to "fastboot boot recovery.img"
Just look for an recovery.img that works temporary and then try to flash it permanently.
I'll try it and get back to you Xziped. If anyone else can think of any other ideas please just throw'em at me, I'm willing to try anything!
Yeah no help there either. It does the exact same thing temporarily booting into a recovery that it did when I actually had it installed on the phone :\.
I updated ROM manager to the latest and tried installing CWM with that but to no avail. It still says that there is no recovery installed when I do that.
Simultaneity said:
Yeah no help there either. It does the exact same thing temporarily booting into a recovery that it did when I actually had it installed on the phone :\.
I updated ROM manager to the latest and tried installing CWM with that but to no avail. It still says that there is no recovery installed when I do that.
Click to expand...
Click to collapse
Sorry but if not even the temporary recovery boots up, i dont know what else we can do
did you try some of the older recoverys? is your bootloader unlocked?
I haven't tried an older recovery and my bootloader is unlocked.
could it be a problem with my computer as opposed to the phone itself? As in my computer is messing up when trying to flash the recovery?
I've also noticed now that when I boot into fastboot mode the menu just locks up and doesn't respond to anything. Sometimes I have to pull the battery and other times it'll start responding after randomly pressing the power key a lot of times...
I'll try an older recovery next
Simultaneity said:
I haven't tried an older recovery and my bootloader is unlocked.
could it be a problem with my computer as opposed to the phone itself? As in my computer is messing up when trying to flash the recovery?
I've also noticed now that when I boot into fastboot mode the menu just locks up and doesn't respond to anything. Sometimes I have to pull the battery and other times it'll start responding after randomly pressing the power key a lot of times...
I'll try an older recovery next
Click to expand...
Click to collapse
Use Odin, that might solve your problems. Search for the Nexus S version of Odin in the Dev section here.
khartaras said:
Use Odin, that might solve your problems. Search for the Nexus S version of Odin in the Dev section here.
Click to expand...
Click to collapse
There's a version of Odin for the Nexus S!?!? I'll look into that straight away thanks!
Simultaneity said:
There's a version of Odin for the Nexus S!?!? I'll look into that straight away thanks!
Click to expand...
Click to collapse
Just look @ http://www.samfirmware.com/ .
There you should find all you need
Sent from my Full Android on Crespo using XDA App

[Q] Odd CWM bootloop

Hey guys, I installed CWM on my buddies HTC one S (ville) and I keep getting a weird problem with CWM. I have successfully flashed CM10 multiple times and have made only one back up. Every time his phone dies and he plugs it in and tries to power it on it boots straight to recovery and after you press reboot phone it boots right back to recovery again and again... The only way it fixes itself is when you restore the back up and then it sets him back to that date. I'm wondering if this is a problem with CWM or something else... I'm new to HTC devices because I have always been on the Galaxy line from Samsung so some of this is a little new to me...
Thanks in advance!!
This is a known glitch with CWM. If you plug it in when its off and try to turn it on, it'll automatically Boot into CWM Recovery. I prefer TWRP personally, had too many problems with CWM and getting into the same exact pain-in-the-neck Bootloop as you're referring to.
As far as I am aware, there isn't a way to get out of the CWM Bootloop unless you just let the phone run out of Battery, get into the Bootloader (Which is somewhat of a challenge with the CWM Bootloop), and then flash a different Recovery from Fastboot. Correct me if i'm wrong on there not being any other way around this.
It's happened to me once, I flashed the.stock boot.img and it worked fine.after that. Not sure if its a fix but it got me outta of it.
echo en Android
Thanks guys I think I'll try TWRP but just to check does CM10 work with TWRP and if so how do I flash a new recovery?
yes cm10 worx with twrp. For flashing recovery, download d appropriate recovery.img for ur device. place this in the fastboot folder or the platform-tools folder.
now, boot into bootloader and enter fastboot then connect phone to PC , it should say fastboot USB .
Now open a command window and use this command---
fastboot flash recovery recoveryname.img.
Sent from my One V
mattytom87 said:
Thanks guys I think I'll try TWRP but just to check does CM10 work with TWRP and if so how do I flash a new recovery?
Click to expand...
Click to collapse
Cyanogenmod 10 does indeed work with TWRP as far as I know. Along with mihirengg19's Reply above, there is also an Alternative way to flashing a new Recovery, and that is to use the HTC One S All-In-One Toolkit. Its the easiest/safest way, if you don't know what you're doing.
yes toolkit is great but manually is best...
Sent from my One V

Device stuck in bootloop?

Hi guys,
So this is my first post but I've been on XDA for a long time. I've been looking for an answer to this problem, and I haven't been successful in finding a post that regards to my situation...
Ok so I just got my tablet today. I upgraded to JB and then I unlocked it using the asus unlocker. I attempted to install TWRP, but when I use .blob files and attempt to load into recovery it didn't work. Anyway, I looked around and I installed CWM recovery instead.
I installed v5.5.0.4 following this guide:
http://theunlockr.com/2012/05/25/how-to-install-clockworkmod-recovery-on-asus-transformer-tf300t/
Now, I notice it's written back in may of 2012 aka before jelly bean... anyway so I installed this using fast boot, and booted into recovery and it worked. I believe I installed the ICS version of CWM. I tried to install Clean Rom v3.3 and I just get bootloops. I can still boot into fastboot and clockwork mod fine.
I tried to install v6.0.1.4 via this thread http://forum.xda-developers.com/showthread.php?t=1846554
But once again if I boot into recovery it just does nothing and reboots after a few seconds.
I re-installed v5.5.0.4 and I can wipe data/install everything just as I normally would, and I still have access to Fastboot. Can I get some help on how I can 1 install the correct CWM and 2 install a working rom? I don't think I bricked my device just yet since I can still flash in fastboot etc.
Thanks guys!
You cant't wipe data from bootloader menu, If you do that, you will get unrecoverable brick.
Sorry I believe I mislead you -> I wiped data from within CWM.
Anyway, I used this thread:
http://forum.xda-developers.com/showthread.php?t=1757077
I went back to stock and I think i'll stay there for a little while longer, this process made me nervous (I've rooted my thunderbolt, droid DNA, galaxy tab 2 7" and my friends phones) so anyway I believe I installed the wrong CWM and that caused errors trying to install a JB rom on a ICS CWM... If you have any insight let me know...
undergfx said:
Hi guys,
So this is my first post but I've been on XDA for a long time. I've been looking for an answer to this problem, and I haven't been successful in finding a post that regards to my situation...
Ok so I just got my tablet today. I upgraded to JB and then I unlocked it using the asus unlocker. I attempted to install TWRP, but when I use .blob files and attempt to load into recovery it didn't work. Anyway, I looked around and I installed CWM recovery instead.
I installed v5.5.0.4 following this guide:
http://theunlockr.com/2012/05/25/how-to-install-clockworkmod-recovery-on-asus-transformer-tf300t/
Now, I notice it's written back in may of 2012 aka before jelly bean... anyway so I installed this using fast boot, and booted into recovery and it worked. I believe I installed the ICS version of CWM. I tried to install Clean Rom v3.3 and I just get bootloops. I can still boot into fastboot and clockwork mod fine.
I tried to install v6.0.1.4 via this thread http://forum.xda-developers.com/showthread.php?t=1846554
But once again if I boot into recovery it just does nothing and reboots after a few seconds.
I re-installed v5.5.0.4 and I can wipe data/install everything just as I normally would, and I still have access to Fastboot. Can I get some help on how I can 1 install the correct CWM and 2 install a working rom? I don't think I bricked my device just yet since I can still flash in fastboot etc.
Thanks guys!
Click to expand...
Click to collapse
My suggestion is to flash the latest stock JB blob.
fastboot -i 0x0B05 flash system blob
fastboot -i 0x0B05 reboot
Once you get it sorted then flash the latest twrp for jb.
Now, when I try flashing blobs and I go to boot into RCK (I believe that's the term...) it just reboots the tablet instead of booting into recovery.
Android software is out of my element, if this was some C (somewhat similar to C) or Matlab I would better understand (I'm a senior Mechanical Engineer in college)
Edit:
Ah didn't see your post. I did what you recommended, and actually, while my device said it was on 4.1.1 JB, when I hold pwr/vol down I see a completely different menu now than last time, so I wonder if perhaps my OTA didn't correctly load everything from the firmware update hmm...
undergfx said:
Now, when I try flashing blobs and I go to boot into RCK (I believe that's the term...) it just reboots the tablet instead of booting into recovery.
Android software is out of my element, if this was some C (somewhat similar to C) or Matlab I would better understand (I'm a senior Mechanical Engineer in college)
Click to expand...
Click to collapse
The same way you flashed cwm.
Windows? Start - in search type cmd - press enter
In the cmd window cd to the directory with fastboot.
Hook cable between tablet and usb port on computer.
On tablet hold power and volume down till you see the bootloader menu.
Down volume till you are at the usb symbol - then volume up.
This should put you into fastboot mode - use the commands above.
Wait till the first command completes before you give the second command.
[INDEX][04 Feb 2013]TF300T & TG-INDEX of Roms/Dev Guides/Kernels/Recoveries/etc. You will find the stock firmware here as well as most other needs.
You will have to unzip to get the blob which you should place in the directory with fastboot.
Thank you very much.
So after flashing the most resent blob, I successfully installed CWM recovery and successfully flashed a rom. I'm not sure what the issue was before. Thank you for the help! much appreciated.
undergfx said:
Thank you very much.
So after flashing the most resent blob, I successfully installed CWM recovery and successfully flashed a rom. I'm not sure what the issue was before. Thank you for the help! much appreciated.
Click to expand...
Click to collapse
You're welcome.
Good Luck!

Disaster Recovery - Life after wrong Flash ? OnePlus

Hello all,
2 days ago when on vacation i decided to temper around with my OnePlus one that i recently bought (have bought the Chinese version but it was already rooted and had cyanoged mod on it)
All was fine until i decided to flash Paranoid Android and i posted a question here, about how to bypass the always apearing CyanogenMod Simple Recovery tool.
After trying what everyone suggested and not getting result i had 1 last thing that someone suggested:
http://forum.xda-developers.com/showthread.php?p=54717885
If you still have not fixed this issue, for some reason when I was flashing my recovery it would NOT work for the life of me until I changed the name of the custom recovery file to 'recovery.img'. Everytime I flash (for example) openrecovery-twrp-blah-bacon.img it would say success, but it kept rebooting into CM fastboot mode.
Click to expand...
Click to collapse
I misunderstood and i renamed the .zip file from paranoid sources into recovery.img and flash (Kernel) it via some app from play store, i thin it was TRWL
Now my phone is stuck into loading faze and the only thing i can do is enter Fastboot mode.
I tried to do a:
fastboot erase cache
But it did not work, its still stuck in loading and will not do anything.
Could you help me out ? I have a really bad feeling i just lost my phone due to hurrying and not having a pc around to read more.
You can try to fastboot flash recovery(original or proper one that works) but I don't know the exact commands.
In the first case where your recovery would not switch from CM to TWRP/CWR was because you had "Update CM Recovery" enabled in Developer Options. If you ticked that off, then it would have replaced CM Recovery. Its confusing yeah.
So wait... you renamed the .zip to a .img? Thats not good. But at least you can enter fastboot mode so thats at least something. Is your bootloader still unlocked? Are you able to boot into recovery mode? Try fastboot boot <name-of-recovery-for-twrp>.img and see if you can get into recovery.
If you can then perform a wipe and then enable adb sideload within TWRP and then type,
adb sideload <name-of-zip>.zip and then after its done sideloading, reboot
Thanks for the answer.
I managed last night out of 10 flash resets to get the Custom Recovery Tool to booth up.
I was about to give up when i saw it boot and i immediately flashed the CM .zip i had on the phone from last time.
I even managed to get Paranoid android to flash and im very happy.
Thanks for the help
vidockq said:
Thanks for the answer.
I managed last night out of 10 flash resets to get the Custom Recovery Tool to booth up.
I was about to give up when i saw it boot and i immediately flashed the CM .zip i had on the phone from last time.
I even managed to get Paranoid android to flash and im very happy.
Thanks for the help
Click to expand...
Click to collapse
I'd appreciate it if we helped give us a thanks.
Sent from my One using Tapatalk

Categories

Resources