Related
I have the Galaxy Tab 2 10.1 Wifi & rf Model
First time "rooting a device". And now I'm trying to install a rom with no success PLEASE HELP ME
First, i rooted the tablet with CF-Auto-Root from ChainFire http://forum.xda-developers.com/showthread.php?t=1957165
Everything went great. I checked with root checker and i got root access.
Later I installed via Odin GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5 http://www.androidfilehost.com/?w=files&flid=14129 from Android-Andi
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the
cm-11-20140426-UNOFFICIAL-p5110.zip http://www.androidfilehost.com/?w=files&flid=14141 that I had on the sd card
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
jazzvel said:
I have the Galaxy Tab 2 10.1 Wifi & rf Model
First time "rooting a device". And now I'm trying to install a rom with no success PLEASE HELP ME
First, i rooted the tablet with CF-Auto-Root from ChainFire http://forum.xda-developers.com/showthread.php?t=1957165
Everything went great. I checked with root checker and i got root access.
Later I installed via Odin GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5 from Android-Andi
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the cm-11-20140426-UNOFFICIAL-p5100.zip that i had on the sd card
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
Click to expand...
Click to collapse
Looks like you flashed a 5100 Rom on a 5110 or 5113 tab. Check your model number carefully before proceeding and thenyou need to use the ROM that is specific to your tab model. If you have a model GTP5100 then only 5100 Rom. If you have 5110 or 5113 model then you may use a 5110 or 5113 Rom. Those 2 (5110/5113) are basically interchangeable. Be careful and make sure you are using correct version as you may brick your device if not.
CSP III said:
Looks like you flashed a 5100 Rom on a 5110 or 5113 tab. Check your model number carefully before proceeding and thenyou need to use the ROM that is specific to your tab model. If you have a model GTP5100 then only 5100 Rom. If you have 5110 or 5113 model then you may use a 5110 or 5113 Rom. Those 2 (5110/5113) are basically interchangeable. Be careful and make sure you are using correct version as you may brick your device if not.
Click to expand...
Click to collapse
Oh my bad, there was a typo on my post the name of the file I fixed it and added the links to the places where i got the files.
So yeah, I used the correct one the 5110 that is supposed to work with the 5113.
And well, the result is that I have a rooted tablet with the GT-P5110_PhilZ-Touch-Recovery_6.26.1 But Can't install the CM 11...
Any Help will be much appreciated
jazzvel said:
Oh my bad, there was a typo on my post the name of the file I fixed it and added the links to the places where i got the files.
So yeah, I used the correct one the 5110 that is supposed to work with the 5113.
And well, the result is that I have a rooted tablet with the GT-P5110_PhilZ-Touch-Recovery_6.26.1 But Can't install the CM 11...
Any Help will be much appreciated
Click to expand...
Click to collapse
Try one of Android Andi's CM11 Unofficial builds.http://forum.xda-developers.com/showthread.php?t=2571498 Personally, I never have luck with the nightlies.
CSP III said:
Try one of Android Andi's CM11 Unofficial builds.http://forum.xda-developers.com/showthread.php?t=2571498 Personally, I never have luck with the nightlies.
Click to expand...
Click to collapse
and that is what I tried
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the
cm-11-20140426-UNOFFICIAL-p5110.zip
Click to expand...
Click to collapse
if I have the Philz-touch recovery, if I flash another recovery via Oidn will philz-touch recovery will be replaced? Can I do that without messing my tablet?
And then try to install the unofficial cm 11 again?
jazzvel said:
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
Click to expand...
Click to collapse
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Android-Andi said:
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Click to expand...
Click to collapse
Thanks for your answer.
So I can just flash the correct one and it will overwrite the existing one? Or do i have to uninstall first?
No Mirrors
Android-Andi said:
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Click to expand...
Click to collapse
I get no mirrors for this download. But I do with any other downloads you have there.
GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5
Or could I install the .zip with Odin?
GT-P5110_PhilZ-Touch-Recovery_6.26.1.zip
no @jazzvel you can not use the zip (not without modification to flash it from current recovery).... i did that four you.
Download attached "recovery-tab2.zip"
copy it to your internal Storage or MicroSD
boot your recovery
flash the "recovery-tab2.zip"
reboot your recovery to take affect!
DON´T USE ATTACHED ZIP ON OTHER DEVICES - P511X ONLY!
It Worked!
Android-Andi said:
no @jazzvel you can not use the zip (not without modification to flash it from current recovery).... i did that four you.
Download attached "recovery-tab2.zip"
copy it to your internal Storage or MicroSD
boot your recovery
flash the "recovery-tab2.zip"
reboot your recovery to take affect!
DON´T USE ATTACHED ZIP ON OTHER DEVICES - P511X ONLY!
Click to expand...
Click to collapse
This worked flawlesly! Thanks!
If you don't mind me asking, just want to know for future reference
The recovery-tab2.zip contained the correct philz-touch recovery or What was it?
Thank you very much!
You are the man!
Q&A for [RECOVERY] [TWRP] T.W.R.P. for Samsung Galaxy Ace 3 LTE (GT-S7275)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [TWRP] T.W.R.P. for Samsung Galaxy Ace 3 LTE (GT-S7275). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
TWRP or CWM?
Which of the two would you recommend for CM12? Thanks for your hard work . Sorry for my English.
oscfd said:
Which of the two would you recommend for CM12? Thanks for your hard work . Sorry for my English.
Click to expand...
Click to collapse
You can use any of them. Both are fully functional. I prefer TWRP because it makes smaller in size backups, it is a touch recovery also
Sent from my GT-S7275R
TWRP fixes randoms reboots
I had random reboots when I had the CWM recovery 6.0.5.1. , but I installed the TWRP recovery and the problem has been fixed (with CM12) :victory: Sorry for my English.
I never had random reboots on CM12 either with CWM or with TWRP
Help There Is No Partition SD Card in Advanced Option
I just install Twrp 2.8.5.0,when I boot to the recovery everything is fine,except when I try to partition my sd card I was surprise when I found out there is only 6 option in advanced and the partition sd card is not here and there is a blank space there it suppose to be partition but it somehow gone,I checked my root status and I reinstall it again and again.Did somebody have the same problem as me?
I tried both cm12 and stock firmware the partition option just wont appear,what is happening,is this a bug or Im doing it wrong?
Please
I`m appreciate if you reply to me THX:fingers-crossed::fingers-crossed::fingers-crossed:
TheTRon said:
I just install Twrp 2.8.5.0,when I boot to the recovery everything is fine,except when I try to partition my sd card I was surprise when I found out there is only 6 option in advanced and the partition sd card is not here and there is a blank space there it suppose to be partition but it somehow gone,I checked my root status and I reinstall it again and again.Did somebody have the same problem as me?
I tried both cm12 and stock firmware the partition option just wont appear,what is happening,is this a bug or Im doing it wrong?
Please
I`m appreciate if you reply to me THX:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
This is something dangerous, better use windows apps, like Minitool Partition Wizard
Although I can add this function
kostoulhs said:
This is something dangerous, better use windows apps, like Minitool Partition Wizard
Although I can add this function
Click to expand...
Click to collapse
So you mean you disable the partition option of this twrp?
I dont see the partition option.Is it normal or not?(Sorry Im dumb)
If it is normal,is ok .Im still gonna use it,just hope it is not a bug of something:good::good::good:
THx
TheTRon said:
So you mean you disable the partition option of this twrp?
I dont see the partition option.Is it normal or not?(Sorry Im dumb)
If it is normal,is ok .Im still gonna use it,just hope it is not a bug of something:good::good::good:
THx
Click to expand...
Click to collapse
No it is not a bug, just a removed feature. It is said that Samsung devices need this flag, that removes this partition thing
Why doesn't the twrp.zip work for me can someone make an IMG so I can use flashify
danman567 said:
Why doesn't the twrp.zip work for me can someone make an IMG so I can use flashify
Click to expand...
Click to collapse
Download the tar.md5 and extract it with winrar
Sent from my GT-S7275R
Thank you can this also be done with the zip file
Sent from my GT-S7275R using XDA Free mobile app
TWRP on the GT-S7275R?
Hey i found this guide for installing CWR on the GT-S7275 and thought it should be the same to install TWRP. Is this the Problem or that i have the GT-S7275R with the "R" ?
Is there a way to install TWRP on it to flash your CM12 ROM?
aldileon said:
Hey i found this guide for installing CWR on the GT-S7275 and thought it should be the same to install TWRP. Is this the Problem or that i have the GT-S7275R with the "R" ?
Is there a way to install TWRP on it to flash your CM12 ROM?
Click to expand...
Click to collapse
This is compatible with GT-S7275(R for sure, others I don't know)
kotzir said:
This is compatible with GT-S7275(R for sure, others I don't know)
Click to expand...
Click to collapse
So i should try the cwm? Some other guys had similar problems: After step 10 i wanted to boot to recovery but after a few seconds of the recovery loading screen (blue text) it booted to normal android.
Uninstalling CWM, getting this version of TWRP
I'm trying to get CM 12 on a friends phone but I can't get the recovery to work,
This is what I did:
1. Installed CWM through ODIN v3.07 (going into download mode and stuff)
2. It worked! I went into recovery mode and started wiping everything, but I got an error when wiping the cache partition
3. The phone rebooted.
3. Went to ODIN again, downloaded TWRP but after installing it (which I did correctly according to ODIN v3.07) the recovery didn't change and it's still that buggy build of CWM that won't let me install CM 12 on the device.
4. I though I could force install the recovery using a .img I found here http://forum.xda-developers.com/ace-...3-lte-t2989278 but I really don't know how, any thoughts?
This is the buggy CWM copy I used and I want to remove: http://forum.xda-developers.com/show....php?t=2548856
Thanks!
hi there - i've tried both CWM (recovery-6.0.5.1.tar.md5) and twrp-2.8.7.0.tar.md5 but is still unable to install the cm-12.1-20150821-UNOFFICIAL-loganreltexx.zip.
I've downloaded the cm files a few times and have even formatted the sdcard yet receive this error message:
E:Cant open /storage/sdcard1/cm-12.1-20150821-UNOFFICIAL-loganreltexx.zip (Bad)
Installation aborted.
Appreciate advice on what I have done wrong or not done? Tks!
kotzir said:
I never had random reboots on CM12 either with CWM or with TWRP
Click to expand...
Click to collapse
Proposals
Hello Kotzir,
First of all, thank you for your great job !
Install via ODIN, already known method, like CWM
On this thread, it would be helpful to add a link to the latest version of Odin, or otherwise a link to this page :
http://forum.xda-developers.com/showthread.php?t=2548856
And to precise how to enter the download mode :
1. Go to download mode on the device : when the phone is off, press "Home+ Volume DOWN + Power"
And, to be complete :
6. And when the phone is automatically rebooting, press "Home+ Volume UP + Power" to enter in the recovery mode.
Elsewhere the TWRP recovery will be erased by the stock ROM, and it would be to be redone...
Thanks !
Q&A for [WIP] [ROM] [Dirty Developers] [4.4.4] CM11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [WIP] [ROM] [Dirty Developers] [4.4.4] CM11. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey i have a problem with this rom
hey i have a problem with this rom
it's my first time to rom my mobile
it's steps what i do
1- clockworkmod recovery 6.0.3 for samsung galaxy ace plus
2- Rooted my mobile and got a Supersu app after restart mobile
3- put rom file .zip in my sd and shutdown my mobile
4- i go in recovery and Wipe your data/cache, including the Dalvik Cache.
5 - when i try to setup the rom i got " status 7 install aborted "
Good evening,
Well,
Not needed root!
1. If i don't have any recovery, flash clockworkmemory or twrp! In my opinion is better twrp
2. Copy .zip into your sd card
3. Reboot into recovery
4. Wipe data, cache, dalvik e system! Remember, is very important wipe System for an clean installation
5. Flash zip from sd-card
6. Reboot
here you go buddy
http://forum.xda-developers.com/gal...de-how-to-make-version-flashable-via-t2958667
What about android lollipop ?
Facing bugs after installation of Cynogenmod 11 in S7500
Hi,
There is some problem to be highlighted after installation of cynogenmod11 OS in Samsung GT-S7500 model.
Request you ton please fix this issues in upcoming updates.
1) Restart the Mobile after 4-5 Hrs duration.
2) Restart the Mobile after disconnecting USB from PC.
3) Sometime mobile are totally hang during using of application like Whatapp, Hike, Facebook messenger etc.
4) Video recording not working.
5) Camera pic quality is poor.
6) Battery draining faster.
GPS seems to not working. (dirtydev cm11)
Hi.
I try to explain with a few words.
I can't localize my position with GPS.
I tried Sygic, (new and old versions), Copilot. I activated only the gps of the device. But it never finds my position.
Have you got the same problem?
PS: sorry for bad english.
sd swap
hi first can i say a big thanx for all the hard work you do. so far im trying to decide if speed mod or this rom is the best. i prefer all the things on this 1 but only thing making me favour speed mod is the option to use external has primary. ive tried all the different options i read on how to swap on cm11 but none seem to work for me, if thi option was available this rom would be the best by far
guys can i flash this on my GT-S7500T ??!!!
I afraid that I will get a BRICKED phone!
pls help me what should i do?!
any one tested this before?!!
Im still on 2.3.6
Happy valentine guys
any suggestion for my problem?!
some one help me pls.
I afraid that I will get a BRICKED phone!
But I need android 4 version
i would like to know which CWM or TWRP to use to flash this rom?
and please be humble to share the link as well.
sorry i must have failed to see if it was mentioned somewhere.
thanks in advance
Problem with CM11
When I flash CM I get the following:
assert failed: getprop("ro.product.device") == "trebon: || getprop ("ro.product.device") =="trebon"
Click to expand...
Click to collapse
I'm lazy to mention all but in the end it writes: GT-S7500 two times and
Error in cm-11-20150113-DirtyDev-trebon.zip
Status 7
Installation aborted.
Please help me
ariton1 said:
When I flash CM I get the following:
I'm lazy to mention all but in the end it writes: GT-S7500 two times and
Error in cm-11-20150113-DirtyDev-trebon.zip
Status 7
Installation aborted.
Please help me
Click to expand...
Click to collapse
When you have downloaded the zip, have you unzip and edited it? Or have directly flashed the zip?
Anyway, is strange or is a recovery's problem or you have edited the zip in some way
vksberi said:
i would like to know which CWM or TWRP to use to flash this rom?
and please be humble to share the link as well.
sorry i must have failed to see if it was mentioned somewhere.
thanks in advance
Click to expand...
Click to collapse
Both recovery should be ok!
ticoo said:
guys can i flash this on my GT-S7500T ??!!!
I afraid that I will get a BRICKED phone!
pls help me what should i do?!
any one tested this before?!!
Im still on 2.3.6
Click to expand...
Click to collapse
I have not idea, you should try!
I'm not sure, but if you'll brick the phone you can restore with re-flashing the stock rom
WebKit Lag
How much longer will it be till the WebKit lag is fixed? It's really "bugging" me off c:
10/10 best pun 2015
please help guys i have no recovery or factory reset
Hi thanx for all your time and effort you put into roms. I have been using cm11 for few weeks but all of a sudden i cant enter recovery or do factory reset I've tried hard reset I've tried factory reset option but nothing works. My phone tries to enter recovery because screen flashes then stays blank but i can enter download mode. I was going to try Odin but im worried has i have no nandroid back up. Please help guys if anyone has a answer for this i will be very grateful. My phone has been working great up until now
Many thanx you guys are the best
please add step-by-step how to install this rom
Problem in installing this ROM
I am getting error in Recovery that "this ROM is for GT - S7500 and your device is GTS7500".(Error status 7) What should I do now?
DevMeena401 said:
I am getting error in Recovery that "this ROM is for GT - S7500 and your device is GTS7500".(Error status 7) What should I do now?
Click to expand...
Click to collapse
Probably you are trying to flash the rom with CWM you must change the recovery, flash TWRP 2.5.0.0 with odin
zyxw-androidiani said:
Probably you are trying to flash the rom with CWM you must change the recovery, flash TWRP 2.5.0.0 with odin
Click to expand...
Click to collapse
Tried but in TWRP it is just skipping MD5 sum and said process complete but inside the phone nothing changed. I don't know what to do, in TWRP I am unable to locate my old back up while in CMW it is not allowing me to go back using same back giving me error of MD5 sum.
DevMeena401 said:
Tried but in TWRP it is just skipping MD5 sum and said process complete but inside the phone nothing changed. I don't know what to do, in TWRP I am unable to locate my old back up while in CMW it is not allowing me to go back using same back giving me error of MD5 sum.
Click to expand...
Click to collapse
Which rom already have you ?
This is my first tutorial so please tell me if I missed anything This thread will teach some noobs here who are on stock 4.1.2/4.2.2 and want to flash latest roms like cm12/cm11/Euphoria Os and etc. This tutorial is self-tested by me!
______________________________________________________________________________
1) Firstly, you should unlock the bootloader. To do this go to this thread> http://forum.xda-developers.com/xperia-l/general/tutorial-bootloader-unlocking-relocking-t2332900 (after flashing you may get a bootloop so flash stock ftf to recover > http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955 http://forum.xda-developers.com/xperia-l/general/sony-xperia-l-flashable-ftfs-locked-t2560642
2)You should install a recovery > http://forum.xda-developers.com/xperia-l/orig-development/cwm-recovery-installer-t2589320 for this you need root > http://forum.xda-developers.com/xperia-l/general/rootkit-xperia-l-15-3-1-17-1-click-root-t2591290 Backup your stock rom(optional) and TA(if the phone gets damaged during warranty) and copy rom zip file to sd card http://forum.xda-developers.com/xperia-l/orig-development/4-4-3-aospa-legacy-4-4-beta1-t2571273
3) In recovery Wipe cache/dalvic/art cache> Factory data reset> clean to install a new rom
4) Flash the rom and Gapps for specific rom(may not be included so google (the version of android gapps) and flash it after rom. Edit: Flashing kk is not necessary.
5) Reboot and wait for some time... Instalation takes some time... :good:
___________________________________________________________________________
6)(BONUS) If you want a good recovery like philz/twrp > http://forum.xda-developers.com/xperia-l/themes-apps/beta-fota-cwm-one-klick-t3068084 just install an app and click install philz. The app that installs a recovery is unique. It won't be overriden by another rom's recovery and u won't have to flash tz boot.img again and again... Thumbs up if you liked my tutorial :good: I do appreciate it! And of course, if you need any help just comment here or add me on facebook.
I'm here to help you guys!
Edit: There are so many good roms for our XL on xda( I don't compare hard work of devs). Here are some ones that I tried and suggest checking out:
Euphoria OS: http://forum.xda-developers.com/xperia-l/orig-development/rom-euphoria-os-1-0-t3069503
Ressurection remix: http://forum.xda-developers.com/xpe...m-resurrection-remix-lollipop-v5-3-0-t3008255
Glade rom: http://forum.xda-developers.com/xperia-l/orig-development/rom-glade-rom-t3060544
And one for KK: http://forum.xda-developers.com/xperia-l/orig-development/4-4-3-aospa-legacy-4-4-beta1-t2571273 check out my video on youtube!
My video reviews on YouTubeGlade Rom https://www.youtube.com/watch?v=a3k8wF_2pAA
Flex OS: https://www.youtube.com/watch?v=yGmrg6wpdrA
What's on My android(cm12) >> https://www.youtube.com/watch?v=wxJCoAzq56Y
Ressurection Remix Rom: > https://m.youtube.com/watch?v=X8D_lY2xVfU
Blisspop: https://www.youtube.com/watch?v=ubY1hxQdJoA
My Channel: https://www.youtube.com/channel/UC9wT3_zp21yFjIm0hi2S-kw
Happy flashing!
edit: did i say something?
Sent from my C2105 using XDA Free mobile app
You should add backup of TA before unlocking bootloader (in case if phone will got damaged.. during warranty). Else your tutorial is great
Kosa02 said:
You should add backup of TA before unlocking bootloader (in case if phone will got damaged.. during warranty). Else your tutorial is great
Click to expand...
Click to collapse
Copy that! Adding right now!
Iasashvili said:
This is my first tutorial so please tell me if I miss anything This thread will teach some noobs here who are on stock 4.1.2/4.2.2 and want to flash latest roms like cm12/cm11/Euphoria Os and etc. THIS tutorial is self-tested by me!
1) Firstly, you should unlock the bootloader. To do this go to this thread> http://forum.xda-developers.com/xperia-l/general/tutorial-bootloader-unlocking-relocking-t2332900 (after flashing you may get a bootloop so flash stock ftf to recover > http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955 http://forum.xda-developers.com/xperia-l/general/sony-xperia-l-flashable-ftfs-locked-t2560642
2)You should install a recovery > http://forum.xda-developers.com/xperia-l/orig-development/cwm-recovery-installer-t2589320 for this you need root > http://forum.xda-developers.com/xperia-l/orig-development/rom-pac-t27490553) Backup your stock rom(optional) and TA(if the phone gets damaged during warranty) and copy rom zip file to sd card( KK rom is recommended first)http://forum.xda-developers.com/xperia-l/orig-development/4-4-3-aospa-legacy-4-4-beta1-t2571273
4) Wipe cache/dalvic/art cache> Factory data reset> clean to install a new rom
5) Flash the rom. And GApps for specific rom(may not be included so google (the version of android gapps) and flash it after rom
6) reboot and wait for some time... Instalation takes some time... :good:
7) If you want a good recovery like philz/twrp > http://forum.xda-developers.com/xperia-l/themes-apps/beta-fota-cwm-one-klick-t3068084 just install an app and click install philz. The app that installs a recovery is unique. It won't be overriden by another rom's recovery and u won't have to flash tz boot.img again and again... Thumbs up if you liked my tutorial :good: I do appreciate it!
Click to expand...
Click to collapse
hello, i want to try the step 7.. if after i unlock bootloader then i just intall philz apk?
Yes
tbooz14 said:
hello, i want to try the step 7.. if after i unlock bootloader then i just intall philz apk?
Click to expand...
Click to collapse
Install the app and click philz if your bootloader is unlocked. BTW it's written in that thread that can only be installed on cm12/cm11 etc. But not on stock. If you want a recovery on stock rom try the step 2)
you should wipe cache and dalvik after flashing
and one question why is KK recommended first?
No need to wipe cache/dalvic
Flashing_Expert said:
you should wipe cache and dalvik after flashing
and one question why is KK recommended first?
Click to expand...
Click to collapse
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Iasashvili said:
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Click to expand...
Click to collapse
cm11 isnt nessasary...
cm11 overrides system and userdata partition...
cm12 does the same... so there isnt any differenz in flashing cm12 from stock or from cm11....
only thing usefull is to flash latest stock before flashing cm12 ... because other than custom roms ...stock rom will override nearly all partitions.... that means better modem...baseband ...etc... so you should come from last stock
Sent from my C2105 using XDA Free mobile app
Thanks
SdtBarbarossa said:
cm11 isnt nessasary...
cm11 overrides system and userdata partition...
cm12 does the same... so there isnt any differenz in flashing cm12 from stock or from cm11....
only thing usefull is to flash latest stock before flashing cm12 ... because other than custom roms ...stock rom will override nearly all partitions.... that means better modem...baseband ...etc... so you should come from last stock
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Deleted my nonsense!
Iasashvili said:
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Click to expand...
Click to collapse
well this is how many myths about flashing stuff born...
Iasashvili said:
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Click to expand...
Click to collapse
hello me again.. have some question again.. hehe if i want to flash RR rom by david then i have to flash first the cm11? then cm 12?
or skip flashing cm 11 or cm 12 and go ahead on RR by david
also i tried to back up TA but its fail need rooting acces..
The tutorial for installing recovery is for locked bootloader will it work for unlocked?
Sent from my C2105 using XDA Free mobile app
clean install directly
tbooz14 said:
hello me again.. have some question again.. hehe if i want to flash RR rom by david then i have to flash first the cm11? then cm 12?
or skip flashing cm 11 or cm 12 and go ahead on RR by david
also i tried to back up TA but its fail need rooting acces..
Click to expand...
Click to collapse
No need to flash cm11/cm12 as it was sad...
yes, it will work for UBL too
grenademik said:
The tutorial for installing recovery is for locked bootloader will it work for unlocked?
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
But in my experience, the recovery was a little buggy and after some time was gone Not sure why. Used it just once to flash cm12
Yeah, sorry about that...
Flashing_Expert said:
well this is how many myths about flashing stuff born...
Click to expand...
Click to collapse
I was just sharing my own experience. Thanks for notice. I just edited it
now you update this.. all is clear now no more question thanks.. ill recommend this thread of your to others newbie
you are always the best guys.......thank you:good::good::good::good:
I have a HUGE problem. Please help me ASAP!
I just flashed my Xperia L to CM 12.1. I was already on CM 12 before. So I went into recovery, wiped everything and installed the new ROM from zip. Everything worked fine except for the network signal. I was getting no network signal at all. So, when I rebooted the phone, I saw that the ThunderZap kernel was also removed. I tried to flash the kernel using flashtool, but this particular variant has 2 .img files (bootlp and bootkk). I flashed them both using the FlashtTool. Now, when I reboot my phone, all I see is the ThunderZap logo. Please help me ASAP, as this is my only primary driver phone.
I rooted the phone using the install.bat toolkit. unlocked the bootloader using flashtool and imei on sony. flashed stock rom. then installed recovery and flashed a custom rom.
The wifi stopped working. cant even turn it on. (the date keeps reseting to 1970 on every flash btw)
Tried miui rom, cm12, stryfex roms. same issue..
I tried:
Installing a different version of flashtool
Changing wlan.ko(can't find a prima folder)
Installing a different kernel
Flashtool says error flash aborted on flashing stock ftf
(Closing TA partition
09/004/2015 19:04:30 - INFO - Parsing boot delivery
09/004/2015 19:04:30 - INFO - Ending flash session
09/004/2015 19:04:30 - ERROR -
09/004/2015 19:04:30 - ERROR - Error flashing. Aborted
09/004/2015 19:04:30 - INFO - Device connected in flash mo)
please tell me how to get wifi to work on cm12 or flash a stock ftf
everytime i try to backup using twrp keeps failing please help s4 i9500
Updating partition details...
E: unable to stat /data/data/com.google.android.gms/app_dg_cache/temp_ba778534-d315-4e68-8c80-2def33a7bbof/the.apk
and this repeat like 5 times and in the end backup always fails
jerickcfc said:
everytime i try to backup using twrp keeps failing please help s4 i9500
Updating partition details...
E: unable to stat /data/data/com.google.android.gms/app_dg_cache/temp_ba778534-d315-4e68-8c80-2def33a7bbof/the.apk
and this repeat like 5 times and in the end backup always fails
Click to expand...
Click to collapse
Hmm ... TWRP backup should work on your device.
Have you installed this TWRP version: [RECOVERY][i9500] TWRP 2.8.7.0 touch recovery [2015-06-23] by Dees_Troy?
If not, please do so. It's the latest official for your device.
In case you still have issues, please post in this thread ... including as much information as possible to get best help.
If you have further questions, best to ask in the [HELP THREAD] Galaxy S4 | Ask any question | Noob friendly. by malybru.
Good luck !
BTW ... you can also create a backup with FlashFire app from Chainfire, if you still have issues with TWRP recovery.
It_ler said:
Hmm ... TWRP backup should work on your device.
Have you installed this TWRP version: [RECOVERY][i9500] TWRP 2.8.7.0 touch recovery [2015-06-23] by Dees_Troy?
If not, please do so. It's the latest official for your device.
In case you still have issues, please post in this thread ... including as much information as possible to get best help.
If you have further questions, best to ask in the [HELP THREAD] Galaxy S4 | Ask any question | Noob friendly. by malybru.
Good luck !
BTW ... you can also create a backup with FlashFire app from Chainfire, if you still have issues with TWRP recovery.
Click to expand...
Click to collapse
i tried to flash the lastest one but also fails, i just flash cwm and backup worked its fine now thanks to you all
jerickcfc said:
i tried to flash the lastest one but also fails, i just flash cwm and backup worked its fine now thanks to you all
Click to expand...
Click to collapse
I am glad that you have get it worked now.
Thanks for letting us know.
Thread closed.