[ROM] CM13 for T31x - Galaxy Tab 3 8.0 Android Development

[ROM] CM13 for T31x - Galaxy Tab 3 8.0 Android Development

Thread Closed....All support focus has moved to Lineage.
I am creating this thread as a place to discuss development of unofficial CM13 builds for the T31x devices. Those of you that have been around here for a while already know that I tend to get busy with other stuff and disappear a times. So, with that said, if you would like to contribute to the development of this rom, please feel free to do so. I can make you a contributor and you will have the ability to modify this OP as required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Standard Disclaimer
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
IRC Channel for Development Chat: I am usually on weekdays 7-4 EST
http://webchat.freenode.net/?channels=Tab3Dev
What Doesn't Work:
- Bluetooth has audio issues
- External SDCard will not work as "internal" storage
INSTALLATION
- Make sure you're running latest TWRP 3.0.2-0
- Copy GApps and CM ZIPs to your internal or external SDCard
- Boot into Recovery
- Perform WIPE:
In TWRP, select Wipe --> Advanced Wipe.
Check Dalvik/ART Cache, System, Cache, and Data
Swipe to Wipe
- Flash CM zip
- Flash GApps zip
- Reboot
Updating to a newer version of THIS rom ("dirty" flash)
- Boot into Recovery
- Flash CM zip (no need to re-flash gapps or wipe anything)
- Reboot
If you have any issues after doing a "dirty" flash, do a clean install before reporting any problems.
Downloads
CyanogenMod
Builds: https://www.androidfilehost.com/?w=files&flid=44848
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 6.0 zip) - now on tap needs mini or higher.
HEADS UP: Be sure you flash the gapps package when flashing your rom. If you boot your rom, then try to flash gapps later, you will have issues.
CHANGELOG
For a list of CM changes, you can review the i9300 nightly changelog located HERE.
The i9300 is a similar platform to ours, so most of what is listed there will be applicable for us, unless it is i9300 device specific.
SCREENSHOTS
Coming Soon
DEVICE SPECIFIC SOURCES
- Kernel: https://github.com/gr8nole/android_kernel_samsung_smdk4x12
- Common T31x device: https://github.com/gr8nole/android_device_samsung_lt01-common
- SM-T311: https://github.com/gr8nole/android_device_samsung_lt013g
- SM-T310: https://github.com/gr8nole/android_device_samsung_lt01wifi
- SM-T315: https://github.com/gr8nole/android_device_samsung_lt01lte
CONTRIBUTORS
- CyanogenMod Team, CyanogenMod and AOSP contributors.
- @ketut.kumajaya, for his earlier work in the Tab 3 community.
- @tohenk, for his CM-12.1 Samsung Galaxy Tab 3 8.0 builds/fixes.
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
XDA:DevDB Information
CM13 for T31x, ROM for the Samsung Galaxy Tab 3 8.0
Contributors
gr8nole
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: KitKat Firmware
Based On: CyanogenMod 13
Version Information
Status: Beta
Created 2015-12-14
Last Updated 2017-01-03

Reserved
Tips:
If you flash a gapps package and get a force close on the keyboard, boot into TWRP, mount system, then choose the file manager option and delete /system/lib/libjni_latinimegoogle.so Fixed
You will need to give your browser permission to access storage before you can download anything with it. Go to Settings-Apps to adjust permissions.
If you flash a Gapps package with Google Camera, the camera may not work. Many i9300 users are reporting that the new Google Camera needs an API that we do not have and therefore will not work.
When connecting the tablet to a computer to transfer files, it will always initially be in "Charging" mode and you will need to select "File Transfer" mode by clicking on the notification on the tablet.
Camera - If you get "can't connect to camera" message, download Mediaserver Killer app from store and use it.
Netflix - If you get lines in your Netflix video, edit your data usage settings on the Netflix website to Low or Medium. I created a "mobile" profile and set the data usage to "low"; then selected that profile in the app and I no longer get the lines on the videos.
Google Movies - If you get a "license error", you need to give the Google Movies app permission to access "phone"; then reboot.
I have noticed that the latest version of Google Movies does not work (at least on my T310). It always gives the "failed to fetch license" error when trying to play purchased movies. I found this same problem when I first starting using CM13, but it could be solved then by giving the app permission to access "phone" in the permission settings for that app (then reboot). But, the newest version of the Google Movies and TV app does not request these permissions, so the "fix" for the previous version does not work.
If you want to use Google Movies and TV app, you can install the previous version (3.10.10) and allow the required permissions (then reboot) to get it working again.
I will not post the apk because people have varying ideas about installing apps that are not installed directly from the app store, but you can find the previous app on APK Mirror website.

Source Info
What I used to build CM13:
Please don't ask how to setup a build environment in this thread. There are plenty of guides that will instruct you how to setup a build environment for CM. I will not repeat those instructions, only give you the additional info required for building for our devices.
In addition to the full repo of CM13 sources, I used the following from my git:
lt01-common device tree
lt01wifi device tree
lt013g device tree
lt01lte device tree
smdk4x12 kernel source
proprietary vendor blobs
I also used from CM sources:
smdk4412-common device tree
Samsung Service Mode
Samsung Hardware

Will test on T311 2morrow. :thumbup:

Will test on the t310 as soon as I can I am especially anxious of the Bluetooth headset problem that was evident during 12.X (and other custom roms)
Edit: Tried it out. Bluetooth is still a bit messy for headsets. Unless I am very close (less than 2 meters) - so far.
Edit2: Welcome Back Gr8Nole - missed you (for Dev reasons)

Great job gr8nole. One problem that I encounter that is found on lollipop too is YouTube having lag. I really like to use it but in lollipop and marshmallow there's still problems. Still, thanks a lot for keeping this device up-to-date with the latest version of android. Thank you! ?☺?

luisoriera said:
Crear job gr8nole. Can you please fix YouTube
Click to expand...
Click to collapse
YouTube works for me. What problem are you having?
Sent from my SM-G920V using Tapatalk

He mean when watching videos on youtube for a long time it having lag
---------- Post added at 07:49 AM ---------- Previous post was at 07:00 AM ----------
Device cant detect sim card on sm t311 everthing else is perfect

Thanhtho96 said:
He mean when watching videos on youtube for a long time it having lag
---------- Post added at 07:49 AM ---------- Previous post was at 07:00 AM ----------
Device cant detect sim card on sm t311 everthing else is perfect
Click to expand...
Click to collapse
can it be just upgraded without wiping the data on cm 12.1.1? and were you able to get the sim get detected?
thanks

sandeep0048 said:
can it be just upgraded without wiping the data on cm 12.1.1? and were you able to get the sim get detected?
thanks
Click to expand...
Click to collapse
oh I had a clean flash

Thanhtho96 said:
oh I had a clean flash
Click to expand...
Click to collapse
What about sim card is it getting detected? Pls share ss...
Sent from my SM-T311 using XDA Forums

sandeep0048 said:
What about sim card is it getting detected? Pls share ss...
Sent from my SM-T311 using XDA Forums
Click to expand...
Click to collapse
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?

Thanhtho96 said:
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Click to expand...
Click to collapse
Let me chk.... Downloading it now....will report after sometime...?
Sent from my SM-T311 using XDA Forums
By that time can you please share few SS.. Would like to have a look..

In UI it's not changed so much, but it's working much faster than lollipop

Ya I love new open apps animation

marek_poland said:
In UI it's not changed so much, but it's working much faster than lollipopView attachment 3577095View attachment 3577096View attachment 3577092View attachment 3577093
Click to expand...
Click to collapse
Did you upgraded it or had a new fresh install?
Sent from my SM-T311 using XDA Forums

Fresh new, but I'm on T310. I made a factory reset in TWRP without format system. I was on CM12.1
Sent from my LG-D802 using Tapatalk

marek_poland said:
Fresh new, but I'm on T310. I made a factory reset in TWRP without format system. I was on CM12.1
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Oh ok...so evrything is working fine right accept d video recording gps and youtube?
Sent from my SM-T311 using XDA Forums

I'm not using camera neither gps, but youtube works perfectly, no lags, no freeze
Just for info: screen cast still not working
Sent from my LG-D802 using Tapatalk

marek_poland said:
I'm not using camera neither gps, but youtube works perfectly, no lags, no freeze
Just for info: screen cast still not working
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Oh ok....
Sent from my SM-T311 using XDA Forums
---------- Post added at 04:10 PM ---------- Previous post was at 03:26 PM ----------
Thanhtho96 said:
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Click to expand...
Click to collapse
Ok... I installed without wiping data but sim issue is still the same...
Dint detect the sim.
Secondly i only have one mmc but its showing 2 diferent cards one is 5gb and another one shows 1.5gb n internal is different so altogether its showing 3 memories???... Gplay services crashes might b i have not installed or updated gapps.. Not sure. Bt d main issue is sim doesn't gets detected...
Sent from my SM-T311 using XDA Forums

Related

[ROM][GT-I9105P][UNOFFICIAL] Cyanogenmod 10.1 for Samsung Galaxy S2 Plus (P)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Device-specific source code for the Samsung Galaxy S2 Plus are available from https://github.com/skullface1/android_device_samsung_i9105 and opensource.samsung.com (Kernel Source yet to be uploaded on gihub)
Patch to system/core for RIL to work: https://gist.github.com/pawitp/5372673.
Patch to device/common for bluetooth to work: https://gist.github.com/pawitp/5411720.
Patch to hardware/libhardware for microphone to work: https://gist.github.com/pawitp/5449660
Patch to framework/av for video recording to work: https://gist.github.com/pawitp/5449655
Thanks Pawitp
Do not submit bug on CyanogenMod issue tracker
Important Note
I do not own this phone!So i dont know if i can solve existing bugs/not working lists.I may anytime discontinue the rom. Or someone else can take part in develpment of this rom. The rom has been tested by users on i9105P. It is expected not to work on i9105
Downloads
ROM: cm-10.1-20130511-UNOFFICIAL-i9105P.zip - 160.74 MB
Google Apps: http://goo.im/gapps
Note: recovery.tar.md5 - 6.42 MB CWM-based recovery image with full internal and external sd card support flashable with Odin.
What works?
Wi-Fi (including Wifi Direct and Tethering)
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo & video)
Video playback
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues
NFC does not work
Landscape does not display properly (workaround: Disable HW overlays in Developer Options)
FM Radio does not work
Vibration does not work
Installation
Flash stock firmware!(or make sure you are not on any heavily customised rom)
Install ClockworkMod recovery. See this thread for detailed instruction.
Make a backup!
Wipe data (i.e factory reset, cache and dalvik cache)
Install the ROM using ClockworkMod Recovery
Optionally install the Google Apps Addon(google them)
Wipe again
Changelog
20130511: Initial release
FAQ
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Will this rom work for i9105?
No. Unless you are short of paper-weights dont flash.I might realease it for you guys too PM me.
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Thanks
- The CyanogenMod team - for source code
- Samsung- For kernel source
- Pawitp - For his work on Galaxy Grand Duos which made it easy as hell for me.
- Panda00- For helping me getting device specific things and many other things!
- Ptothej- For providing proprietory files.
- Tim35p07 For testing it

Great to see this out finally Good job skullface.
Now to wait for forums for both the S II Plus and the Galaxy Grand.
Hope the bugs can be ironed out soon as well.

Here are some screenshots by @Tim35p07
Screenshot 1
Screenshot 2

Someone please confirm if mobile data is working?!!
Make sure you use correct APN settings , be in network that your carrier supports (2G or 3G).
Also someone pls explain me what is problem with vibration? Is it not at all working?

ROM work fine, but dont work GSM
"mobile network is unavailable"

xgrzenio said:
ROM work fine, but dont work GSM
"mobile network is unavailable"
Click to expand...
Click to collapse
I believe this is a baseband issue.. Which firmware are you using?
Sent from my GT-I9105P

panda00 said:
I believe this is a baseband issue.. Which firmware are you using?
Sent from my GT-I9105P
Click to expand...
Click to collapse
I9105PBVAMB4 this is it?
Babba ROM work fine all, but now i cant return to Babba, is boot loop
what firmware i need? where i can download?

xgrzenio said:
I9105PBVAMB4 this is it?
Babba ROM work fine all, but now i cant return to Babba, is boot loop
what firmware i need? where i can download?
Click to expand...
Click to collapse
Flash AMB9.. You can find it in the S II Plus index. Do note that you will need to wipe data if you're going to revert to stock. A transition fron stock to CM or the other way round will always require a wipe.
Sent from my GT-I9105P

panda00 said:
Flash AMB9.. You can find it in the S II Plus index. Do note that you will need to wipe data if you're going to revert to stock. A transition fron stock to CM or the other way round will always require a wipe.
Sent from my GT-I9105P
Click to expand...
Click to collapse
after flash stock then reflash CM ? to work gsm?

panda00 said:
Flash AMB9.. You can find it in the S II Plus index. Do note that you will need to wipe data if you're going to revert to stock. A transition fron stock to CM or the other way round will always require a wipe.
Sent from my GT-I9105P
Click to expand...
Click to collapse
He needs to flash the stock kernel, then return

xgrzenio said:
after flash stock then reflash CM ? to work gsm?
Click to expand...
Click to collapse
Flash the stock firmware AMB9, wipe, flash CM10.1, wipe again.
I don't guarantee this will work, but it might
Sent from my GT-I9105P

http://live.samsung-updates.com/index.php?device=GT-I9105P
That is a separate firmware and kernel!
klik download

For guys having no network, as far as i can say, any baseband should work
Cyanogenmod by default is on 3G only.
So if your carrier doesnt have 3G network, it will not register to 2G automatically unlike stock roms.
For getting gsm working , go to setting>more>mobile networks> use 2G only.
I think this will solve the issue
Pls report if it works.

2g and 3g does not work.
When I make a new APN Setting, the new APN does not appear in the APN-list, after saving. Is this normal, or should there appear a new entry?

Kenomann said:
2g and 3g does not work.
When I make a new APN Setting, the new APN does not appear in the APN-list, after saving. Is this normal, or should there appear a new entry?
Click to expand...
Click to collapse
Flash AMB9 firmware. Seems there are some baseband issues.

alexyuh said:
He needs to flash the stock kernel, then return
Click to expand...
Click to collapse
where i fund stock kernel to flash?

xgrzenio said:
where i fund stock kernel to flash?
Click to expand...
Click to collapse
Don't flash stock kernel, flash this
https://hotfile.com/dl/203703278/b6ce30d/RDS_GT-I9105P-PHN-I9105PXXAMB9.zip.html
Then flash CWM Recovery...
Then flash CM10.1, to see if 3G/2G (RIL) work.

panda00 said:
Don't flash stock kernel, flash this
https://hotfile.com/dl/203703278/b6ce30d/RDS_GT-I9105P-PHN-I9105PXXAMB9.zip.html
Then flash CWM Recovery...
Then flash CM10.1, to see if 3G/2G (RIL) work.
Click to expand...
Click to collapse
i downloaded files. 2 hours . now flash. i test
---------- Post added at 07:06 PM ---------- Previous post was at 06:42 PM ----------
xgrzenio said:
i downloaded files. 2 hours . now flash. i test
Click to expand...
Click to collapse
hm.. cwm : instalation aborted...
maybe any mirror of this file???

xgrzenio said:
i downloaded files. 2 hours . now flash. i test
---------- Post added at 07:06 PM ---------- Previous post was at 06:42 PM ----------
hm.. cwm : instalation aborted...
maybe any mirror of this file???
Click to expand...
Click to collapse
Wait no! The firmware (AMB9) is supposed to be flashed via Odin.
Sent from my GT-I9105P

i use odin and this rom but i have boot loop

[NIGHTLY][ROM][4.4.4] CyanogenMod 11 for Samsung Galaxy S4

[NIGHTLY][ROM][4.4.4] CyanogenMod 11 for Samsung Galaxy S4
For Questions and any Discussion use > this thread <
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Downloads
Latest build: http://download.cyanogenmod.org/?device=i9500
Google Apps (CyanogenMod): http://wiki.cyanogenmod.org/w/Gapps
Google Apps (Paranoid with ART Support): http://forum.xda-developers.com/showthread.php?t=2397942
Installation
- First time flashing CM11 to your Galaxy S4 (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM10.2?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another build of CM11?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Known Issues
Please do not report bugs if it is already listen in the list of known issues
Random Call Audio Quality
Speaker a bit loud at maximum volume
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
ART Runtime:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Changelog
A rough changelog is available here:
http://www.cmxlog.com/11/i9500/
For previous unofficial releases, see here
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[NIGHTLY][i9500][ROM][4.4.4] CyanogenMod 11 for Samsung Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
Alberto96, intervigil, runedrune, Grarak
Source Code: https://github.com/CyanogenMod
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-02-23
Last Updated 2015-10-03

Reserved

Reserved

Storage issues
Are there storage issues in this build?? I'm unable to take pictures or download anything... Please help...

lorzinian said:
Are there storage issues in this build?? I'm unable to take pictures or download anything... Please help...
Click to expand...
Click to collapse
All storage issues has been fixed by @intervigil

Alberto96 said:
All storage issues has been fixed by @intervigil
Click to expand...
Click to collapse
Which build ? The 22th one ?
来自我的 GT-I9500 上的 Tapatalk

Air-真心为你 said:
Which build ? The 22th one ?
来自我的 GT-I9500 上的 Tapatalk
Click to expand...
Click to collapse
Yes.

Interim Solution for error while copying files to the internal memory via USB.
* this error is due to a problem in the default kernel CyanogenMod.
To fix, download the kernel below and install on your phone via ODIN. Evident that after installing the ROM.
Link download #Perseus Kernel
https://mega.co.nz/#!DBxyUBDb!OxRnDjNbqk2fiVDsfsOilRTv8spe3zW1kZsomcLLj34
credits: http://forum.xda-developers.com/showthread.php?t=2272602

thiagoribeirorj said:
Interim Solution for error while copying files to the internal memory via USB.
* this error is due to a problem in the default kernel CyanogenMod.
To fix, download the kernel below and install on your phone via ODIN. Evident that after installing the ROM.
Link download #Perseus Kernel
https://mega.co.nz/#!DBxyUBDb!OxRnDjNbqk2fiVDsfsOilRTv8spe3zW1kZsomcLLj34
credits: http://forum.xda-developers.com/showthread.php?t=2272602
Click to expand...
Click to collapse
This one is for flashing via recovery https://mega.co.nz/#!l1R0lTIS!JdcJCvFDdv1MCZSfMNCkY9LvmM3ro3u71EgJ59PRn60

Ehm...now storage configuration is correct.... (without any "hack")
@intervigil : is there something else wrong ?

Mohamed Bilal said:
Hi @Alberto96 the camera doesn't work on the latest nightly official cm11 release. When I open the camera it says unfortunately, camera has stopped.
Is Anyone Else Experiencing the same issue?
Im Using 22 feb build nightly, with Perseus Aplpha 16.1
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The bug that causes the process to terminate the camera is that the application does not get access to the internal memory.
Flash the above commented that the kernel problem to occur. Made here and the error stopped.

Alberto96 said:
Ehm...now storage configuration is correct.... (without any "hack")
@intervigil : is there something else wrong ?
Click to expand...
Click to collapse
There shouldn't be according to the source code. We are not using -w 1023 and -d anymore for external storage sdcard instance. Internal storage should have been working this entire time. FWIW I've not encountered any issues with storage this whole time, I'm also fully able to take pictures to both internal and external storage from the stock CM Camera app.
How are people accessing the SD card anyway? Third party camera app, file explorer without root, file explorer with root, via USB mass storage, via terminal emulator?

It's personal. I installed last night on 22 and even with the custom kernel the camera is giving error while starting.

thiagoribeirorj said:
Do not know each other can have a difference more you used the kernel via ODIN or CWM?
Click to expand...
Click to collapse
This is a flashable zip file, so flash it using CWM https://mega.co.nz/#!l1R0lTIS!JdcJCvFDdv1MCZSfMNCkY9LvmM3ro3u71EgJ59PRn60

Have I found the reason of my problem. I installed the ROM, gapps and then the KERNEL. That made this mistake in the camera.
Retraced process as follows:
1 - install the ROM
2 - install the GAPPS
3 - reset the ROM and do the basic configuration
4 - Finally the KERNEL via CWM.
So it worked perfectly.

Mod Edit
Thread cleaned.
Can I please draw everyone's attention to the first post and "Reporting Bugs"
If you want to help develop this ROM , then please follow the procedure suggested by the [OP]
Otherwise ,post general chit-chat in the discussion threads.
Thank you
malybru
Forum Moderator

ameshiya said:
Its A Known Issue With Stock KiTka Roms There Is A WaY To Fix IT Hope iT Will Work WiTh CM , Try To Install Folder MounT From PlayStore Apply The Fix And ResTarT.
LET ME KNOW IF IT WORKS
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Yeah, I know it's something known. According to @intervigil it shouldn't be causing any problem because is already fixed in the code, but for me and other people is still there. I posted just to let him know that we are experiencing that.
Anyways thanks for your response, I'm using Perseus so I'm not facing that now. :good:

vuiseng said:
why this rom cant install Titanium Backup ??
Click to expand...
Click to collapse
Same problem. Your internal storage isn't working. Flash perseus 16.1.
And guys please, if you have doubts please post in the discussion thread.
Sent from my GT-I9500 using xda app-developers app

vuiseng said:
the camera also got problem........ cant take pic.......... how to fix it ??
---------- Post added at 08:08 PM ---------- Previous post was at 07:51 PM ----------
i put the Titanium Backup app in system/app , then reboot, it can use...........but now my camera got problem~ it say cant connet to camera
Click to expand...
Click to collapse
Because sdcard problem.. Flash perseus

Androiders96 said:
Because sdcard problem.. Flash perseus
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2272602 this one ??

[ROM][4.4.x][BETA-2][PORT][DISCONTUNIED][S7390/S7392][KTU84P]CyanogenMod 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KITKAT), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Port of CyanogenMod 11 (Android 4.4) for the Samsung Galaxy Trend Lite GT-S7390
What's working:
GSM
Receiving and making calls
Display
Camera (partially)
Audio playback
Audio recording
Touch
Bluetooth
Bluetooth tethering
OpenGL rendering
USB-tethering
Mtp/ptp
Sdcard
GPS
Sending/receiving SMS/MMS
Wifi
Wifi Tethering
Not working
Hardware video decoding & encoding (partially)
Video playback
Not tested
-none-
Know issue:
Camera crashes
Offline charging
No more
PLEASE DONT MIRROR MY DOWNLOAD LINKS
DO NOT DISTURB ME BY PRIVATE MESSAGING ABOUT BUGS!
Download
ROM:
- Deleted.
GAPPS:
Click
Install instructions:
You have to use CWM or TWRP. Latest TWRP is recommended.
http://forum.xda-developers.com/android/development/recovery-twrp-2-8-6-0-galaxy-trend-lite-t3111041
Wipe cache, dalvik cache, data, preload, system (be sure you've selected "system" before flashing.)
Flash the CM11 zip
Reboot
boot into recovery mode
Install gapps
Reboot
Upgrading from earlier version of CyanogenMod 11:
Boot into Recovery
Wipe system
Flash CM11 zip
Reboot
Reboot into recovery
Flash GApps
Reboot
Reporting bugs:
Before Reporting bugs make sure you
Not installed any mods/tweaks - if you have installed mods like xposed you can't report bug
Not modified system files
Backup, reflash with a full wipe (do this if mods like xposed is installed) and check if the bug is still there
provide logcat,kmsg. if you reporting reboot then provide last_kmsg.
Thanks to:
@ZIM555 : (huge huge huge thanks for original rom)
@wulsic : (for kernel source)
@SandPox : (for his suggestions/helps)
everyone who's been working on CM11
I know thanks button is not matter but if you like my work please hit thanks and want to give a small amount of money, please donate to me button
Connect
Our Facebook group
XDA:DevDB Information
[ROM][4.4.x][BETA-2][PORT][S7390/S7392][KTU84P][DISCONTINUED]CyanogenMod 11, ROM for the Android General
Contributors
fbli_41
Source Code: http://github.com/fbli41/android_device_samsung_kylevess
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2015-08-06
Created 2015-08-03
Last Updated 2016-01-24

Changelog
BETA-1
Code:
[SIZE=2][LIST]
[*] initial release; 31.07.2015
[/SIZE][/LIST]
BETA-2
Code:
[SIZE=2][LIST]
[*] [B]06.08.2015[/B]
[*]Fix wifi
[*]Update kernel
[*]Replace camera app
[*]Delete unnecessary files
[/SIZE][/LIST]

F.A.Q.
[+]Is ART working properly?
[-]Yes, i am using it since 01:00PM. Now is 10:49PM. No any issue different from dalvik.
Click to expand...
Click to collapse
[+]The phone is restarting continiously when i put it to charge when it's turned off.
[-]Yeah. There is issue with offline charging. To solve it, hold press power button when it turned off. Put your charge adapter when you see "Samsung Galaxy Trend Lite" logo.
Click to expand...
Click to collapse
[+] I can't replace my stock recovery with TWRP. Any solution?
[-] Follow the steps;
Run ODIN and uncheck AUTO REBOOT
Select tar version of TWRP from PDA/AP section.
After succesfully flashing, unplug your device from cable.
Go directly to the recovery mode. (If Samsung started a boot, then repeat the 1-4)
Credits goes to amiro13 at this fix. Thanks!
Click to expand...
Click to collapse
[+]Video playin is not good. Is there any fix?
[-]Yes. @ionutzpaul61 make a flashable zip to fix video issue. It is partially working. Visit this thread to get fix and don't forget the hit thanks for him!
http://forum.xda-developers.com/and...ix-samsung-t3255599/post63974424#post63974424
Click to expand...
Click to collapse
[+] I'm not able to wipe some partitions on T.W.R.P.. How can i fix it?
[-]
Flash whole stock things by Odin
Reboot
Reboot recovery
Wipe data/cache (on stock recovery)
Reboot
Reboot Download Mode
Flash T.W.R.P. and go on to what would you want to flash.
Click to expand...
Click to collapse

can i install it on s7392 ?

1234himanshu said:
can i install it on s7392 ?
Click to expand...
Click to collapse
Yes but you can use only 1 sim

Downloading!!!!
EDIT: Succesfull installed. I can't wait until WiFi will be fixed . This is aswome!!! Camera started ok (until now no crashes).
GOOD JOB!

Very nice!!! :good: video playback and wifi dont work. Video playback works in software decoder on mx player tho. Everything else works on gt-s7392. Waiting for next version with fixes.

great work
almost stable in s7392
i hope wifi fix soon uploaded

StarLord21 said:
Very nice!!! :good: video playback and wifi dont work. Video playback works in software decoder on mx player tho. Everything else works on gt-s7392. Waiting for next version with fixes.
Click to expand...
Click to collapse
What is videoplayback? I've mxplayer but i can't test it because i don't know what is it
shakiraj said:
almost stable in s7392
i hope wifi fix soon uploaded
Click to expand...
Click to collapse
Both of you;
Wifi is already fixed.

Wifi is already fixed.[/QUOTE]
This is amazing!!
When will you compile the rom with wi-fi working?

paulrusu said:
Wifi is already fixed.
Click to expand...
Click to collapse
This is amazing!!
When will you compile the rom with wi-fi working?
Click to expand...
Click to collapse
I will share it when i fixed camera. Will not compile.

fbli_41 said:
I will share it when i fixed camera. Will not compile.
Click to expand...
Click to collapse
thanks. can't wait to share it.
i think many users wait until wifi work and then install the rom. The sooner the better.
keep up the good work!

fbli_41 said:
What is videoplayback? I've mxplayer but i can't test it because i don't know what is it
Both of you;
Wifi is already fixed.
Click to expand...
Click to collapse
video playback= when you play video content :good:
---------- Post added at 02:33 PM ---------- Previous post was at 02:26 PM ----------
If someone switched to art runtime and camera crashes when you open it, disable stock camera then go to Playstore download Google Camera ( https://play.google.com/store/apps/details?id=com.google.android.GoogleCamera&hl=en ) and you will be able to take pictures (still crashing on video recording) :good:

I think i have a little bug here... Sometimes when i'm trying to uninstall CM Themes apps (I don't know if the bug is for all apps but only these apps I have installed on phone ), my phone is rebooting... (that's happening on Dalvik mode)
EDIT: I will try to do a logcat or something like this and i'm so sorry but can't report this on "Bug Reports"

Andrei Radu said:
I think i have a little bug here... Sometimes when i'm trying to uninstall CM Themes apps (I don't know if the bug is for all apps but only these apps I have installed on phone ), my phone is rebooting... (that's happening on Dalvik mode)
EDIT: I will try to do a logcat or something like this and i'm so sorry but can't report this on "Bug Reports"
Click to expand...
Click to collapse
It may cause behind of any app. Do the things under of Before Reporting bugs make sure you in op. Then if there is still same bug. Report it.
(Try to report it from reporting bugs section from up of the page.)

Andrei Radu said:
I think i have a little bug here... Sometimes when i'm trying to uninstall CM Themes apps (I don't know if the bug is for all apps but only these apps I have installed on phone ), my phone is rebooting... (that's happening on Dalvik mode)
EDIT: I will try to do a logcat or something like this and i'm so sorry but can't report this on "Bug Reports"
Click to expand...
Click to collapse
For me themes work very well on both runtimes , you can download and flash again the rom

@fbli_41 Without last thing, i did all things... As i said, i will try to do a logcat/last_log and i will send to you. I installed another apps and uninstalled without problems(now, for me that is not a problem). Maybe I need to apply the original theme and after to uninstall. And I say this again, didn't work to post in "Bug Reports" @ionutzpaul61 Man, i have no problem with themeing engine ... sometimes when i want to uninstall CM theme package i have a problem (that mean can happening to everyone). You can try to uninstall a theme package to tell us if you (don't) have this problem.

Andrei Radu said:
@fbli_41 Without last thing, i did all things... As i said, i will try to do a logcat/last_log and i will send to you. I installed another apps and uninstalled without problems(now, for me that is not a problem). Maybe I need to apply the original theme and after to uninstall. And I say this again, didn't work to post in "Bug Reports" @ionutzpaul61 Man, i have no problem with themeing engine ... sometimes when i want to uninstall CM theme package i have a problem (that mean can happening to everyone). You can try to uninstall a theme package to tell us if you (don't) have this problem.
Click to expand...
Click to collapse
Yes............ reboots when trying uninstall themes
Sent from my Orange Zali using XDA Free mobile app

I haven't got any issue about removing/installing apps.

fbli_41 said:
I haven't got any issue about removing/installing apps.
Click to expand...
Click to collapse
I have this problem only with THEMEING PACKAGEs . In post #14 i SAID " I don't know if the bug is for all apps" . I mean I don't know if I have same problem when uninstalling another app. In post #17 I said "I installed another apps and uninstalled without problems"
Are you reading what I'm writing? = )) Or my English is so bad and don't understand????

[ROM][CM-13.0][6.0] Temasek's UNOFFICIAL Builds

Main Download (AndroidFileHost) [Click here]
Open GApps [6.0]
Flash this to enable root access
SuperSU
CM13 Build
Build Version: v1.4
Android Version: 6.0
For the most up to date changelog please visit:
Temasek’s CM13 Github Changelog

Wifi shows on battery usage chart
1. Lollipop and prior versions of android, "Allow wifi scanning" option was in advanced wifi but now moved to "Location" settings under scanning option (top right corner)
2. Turn off "Allow wifi scanning" to remove the issue.
Help! Miscellaneous is draining my battery!
Miscellaneous itself is not some mystical process that drains battery. It's showing the difference between estimated battery drain and actual battery drain (so more like a summation of all of the miscellaneous processes that drained the battery unexpectedly).
Work In Progress. Will be updated as comments are added.
When reporting a bug, Please Include:
- Your device variant and model number.
- Your bootloader version, baseband, etc.
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel/Build, etc.).
Please read all of the OP before you post. Do not report issues on previous builds only on the latest.

U personally flashed SuperSU ?..because in latest nightlies SuperSU gives bootloop.
Inbuilt cm root works without any issues
Sent from my Moto G

sathish saju said:
U personally flashed SuperSU ?..because in latest nightlies SuperSU gives bootloop.
Inbuilt cm root works without any issues
Sent from my Moto G
Click to expand...
Click to collapse
I did flash 2.52, no problems at all. Although I'd like to state that first I let the ROM boot, enabled root, and then flashed supersu

Request for Mirrors
Hi, tried to download from Renderserver many times, but the d/l fails always. Can you please provide any other mirror, AFH for example? Thanks.

Aayushya said:
I did flash 2.52, no problems at all. Although I'd like to state that first I let the ROM boot, enabled root, and then flashed supersu
Click to expand...
Click to collapse
?
Sent from my Moto G

soumitpl48 said:
Hi, tried to download from Renderserver many times, but the d/l fails always. Can you please provide any other mirror, AFH for example? Thanks.
Click to expand...
Click to collapse
Done, removed renderserver link, it was slow for me as well.

Is WiFi working properly ?
Its not working for me on other Rom.
Thanks

mangesh511 said:
Is WiFi working properly ?
Its not working for me on other Rom.
Thanks
Click to expand...
Click to collapse
Working
Sent from my Moto G

sathish saju said:
Working
Sent from my Moto G
Click to expand...
Click to collapse
wifi is not connecting .this issue i faced on cyanpop/candy rom too.
do i need to do anything for wifi.

What is permissions fix?

mangesh511 said:
wifi is not connecting .this issue i faced on cyanpop/candy rom too.
do i need to do anything for wifi.
Click to expand...
Click to collapse
If your can't connect to WPA2 Enterprise WiFi(need id and password,not only need password) after update to 6.0,
see the link:http://forum.xda-developers.com/goog...3#post63300413
go to \data\misc\wifi\ and edit wpa_supplicant.conf,add this line to your eduroam or wpa-eap network:
phase1="tls_disable_tlsv1_2=1"
I can connect by this way.

sathish saju said:
Working
Sent from my Moto G
Click to expand...
Click to collapse
ysop said:
If your can't connect to WPA2 Enterprise WiFi(need id and password,not only need password) after update to 6.0,
see the link:http://forum.xda-developers.com/goog...3#post63300413
go to \data\misc\wifi\ and edit wpa_supplicant.conf,add this line to your eduroam or wpa-eap network:
phase1="tls_disable_tlsv1_2=1"
I can connect by this way.
Click to expand...
Click to collapse
thanks @ysop.will try this.
so this is known bug.

Falcon xt1032, latest Hurtsky kernel, dialer v. 5.1.1_25 , all authorizations given, baseband MSM8626BP_1032.390.81.01P, pico open gapps.
I'm facing dialer fc, calls start and I can hear them and talk but no notification of incoming calls too. Anybody know hot to solve this? I can provide logcat too.
EDIT: Upgraded radio to 3116.98.00R but still no results.
EDIT2: Re-cleaned and re-flashed everything, dialer fc still there.

Hello everyone. This is my 2nd post in these forums(the first one being in the Q&A section). I've searched for a ROM with Android 6 for the xt1033 (Dual Sim) for my gf and I have chosen this. It seems the less bloated(compared to CyanPop) and also such a thread exists for the Nexus 4(I have no idea who Temasek is xD but I believe the ROM will be great from what I heard on the Nexus 4 forum)
Anyway, I was a good boy and read the OP and everything that I was supposed to read.
The thing is, I didn't find a post that explains the 'bugs' that exist.
Does Camera work(both front and back)? Does video work? Does 3G work? It's not for me, but for my gf and I don't want to fk her phone up as it's not mine.
Thanks a lot for your time.

fr3quency said:
Hello everyone. This is my 2nd post in these forums(the first one being in the Q&A section). I've searched for a ROM with Android 6 for the xt1033 (Dual Sim) for my gf and I have chosen this. It seems the less bloated(compared to CyanPop) and also such a thread exists for the Nexus 4(I have no idea who Temasek is xD but I believe the ROM will be great from what I heard on the Nexus 4 forum)
Anyway, I was a good boy and read the OP and everything that I was supposed to read.
The thing is, I didn't find a post that explains the 'bugs' that exist.
Does Camera work(both front and back)? Does video work? Does 3G work? It's not for me, but for my gf and I don't want to fk her phone up as it's not mine.
Thanks a lot for your time.
Click to expand...
Click to collapse
To be honest, this Rom is even more stable than official CM nightlies in my opinion. Camera, Dual sim, everything's smooth AF. Running it as a daily driver, no issues yet, just remember to grant proper permissions to apps.
Oh, and you might want to first use the inbuilt root app, before flashing supersu, just in case.

No system ui tuner in settings??

Rocketval said:
Falcon xt1032, latest Hurtsky kernel, dialer v. 5.1.1_25 , all authorizations given, baseband MSM8626BP_1032.390.81.01P, pico open gapps.
I'm facing dialer fc, calls start and I can hear them and talk but no notification of incoming calls too. Anybody know hot to solve this? I can provide logcat too.
EDIT: Upgraded radio to 3116.98.00R but still no results.
EDIT2: Re-cleaned and re-flashed everything, dialer fc still there.
Click to expand...
Click to collapse
Yeah same here , dialer FCs

Is there Bluetooth stuttering in this rom like other CM 13 ROM's? Just asking before flashing. Thanks in advance!
Sent from my SM-G900T using Tapatalk

[ROM] LineageOS-14.1 for T31x

I am creating this thread as a place to discuss development of unofficial LineageOS14.1 builds for the T31x devices. Those of you that have been around here for a while already know that I tend to get busy with other stuff and disappear a times. So, with that said, if you would like to contribute to the development of this rom, please feel free to do so. I can make you a contributor and you will have the ability to modify this OP as required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Standard Disclaimer
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
All the source code for LineageOS is available in the Lineage Github repo. And if you would like to contribute to LineageOS, please visit the Gerrit Code Review.
What Doesn't Work:
- flash it and see
==============================
If you want to use this tablet for phone calls, see THIS post before installing.
==============================
==============================
WIFI WORKS - BUT, If you have an issue with wifi not working AND your mac address shows a value starting with 02:00:00, do not post about it UNLESS you take a dmesg log (immediately after a reboot) and post it with your message. Google can tell you how to take dmesg log or see THIS thread.
==============================
INSTALLATION
- Make sure you're running latest TWRP version
- Copy GApps and rom ZIPs to your internal or external SDCard
- Boot into Recovery
- Perform WIPE:
In TWRP, select Wipe --> Advanced Wipe.
Check Dalvik/ART Cache, System, Cache, and Data
Swipe to Wipe
- Flash rom zip
- Flash GApps zip
- Reboot
Updating to a newer version of THIS rom ("dirty" flash)
- Boot into Recovery
- Flash rom zip (no need to re-flash gapps or wipe anything)
- Reboot
If you have any issues after doing a "dirty" flash, do a clean install before reporting any problems.
Downloads
gr8nole no longer builds. tigger 2014's builds pass safetynet and cuberio1 builds only occasionally.
LineageOS
Old Builds by gr8nole : https://www.androidfilehost.com/?w=files&flid=140570
Builds by cuberio1 : Google Drive
Builds by tigger2014 : https://androidfilehost.com/?a=show&w=files&flid=281549
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 7.1 zip) I use nano.
HEADS UP: Be sure you flash the gapps package when flashing your rom. If you boot your rom, then try to flash gapps later, you will have issues.
CHANGELOG
For a list of LineageOS source changes, you can review the i9300 nightly changelog located HERE.
The i9300 is a similar platform to ours, so much of what is listed there will be applicable for us, unless it is i9300 device specific.
DEVICE SPECIFIC SOURCES
- Kernel: https://github.com/gr8nole/android_kernel_samsung_smdk4x12
- Common T31x device: https://github.com/gr8nole/android_device_samsung_lt01-common
- SM-T311: https://github.com/gr8nole/android_device_samsung_lt013g
- SM-T310: https://github.com/gr8nole/android_device_samsung_lt01wifi
- SM-T315: https://github.com/gr8nole/android_device_samsung_lt01lte
- Vendor files: https://github.com/gr8nole/proprietary_vendor_samsung
CONTRIBUTORS
- LineageOS Team, CyanogenMod and AOSP contributors.
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
XDA:DevDB Information
[ROM] LineageOS-14.1 for T31x, ROM for the Samsung Galaxy Tab 3 8.0
Contributors
gr8nole, cuberio1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: KitKat Firmware
Based On: LineageOS
Version Information
Status: Beta
Created 2016-11-04
Last Updated 2019-03-24

Reserved
Make sure you follow the installation instructions.
Do not ask about dirty flashing.
This is a very early build, so please don't start reporting a bunch of little bugs. I know there are things that don't work.
Wifi does work

Screenshots

Great work. Thank you!

Thanks for all the hard work!!!
Sent from my SM-G935T using XDA-Developers mobile app

Whaoo Thanks.
I tried it, wifi working, bluetooth also. I had difficulties with flashing because TWRP was not seeing my filesystem, so I flashed first with flashify, then formated my sd card, then reinstalled.
More details coming
Edit :
Internet, YouTube, Facebook, Dropbox, GPS, downloads working :
Not alpha anymore

You are the man!!!!

Awesome! Thanks!
Thanks for all the gr8t & hard work. I have flashed to CM14.1 on my Galaxy Tab 3.
What is working on my tab 3:
Wifi, bluetooth, gps, camera/video recorder!!!
All seems to be in order. Thanks again Gr8nole!!!

First build for T311 is up.
Give it a test and post logcat with any error reports.

gr8nole said:
First build for T311 is up.
Give it a test and post logcat with any error reports.
Click to expand...
Click to collapse
Can I have a dirty flash from cm13? I know should have a clean but just curious.

Thanhtho96 said:
Can I have a dirty flash from cm13? I know should have a clean but just curious.
Click to expand...
Click to collapse
Test a dirty flash. If it works then all good and if doesn't, clean flash it again.
sent from my beast, Samsung Galaxy Tab 3 8" T311 (old but gold?) running V5 S5 ROM using Tapatalk.

Ibbi786 said:
Test a dirty flash. If it works then all good and if doesn't, clean flash it again.
sent from my beast, Samsung Galaxy Tab 3 8" T311 (old but gold) running V5 S5 ROM using Tapatalk.
Click to expand...
Click to collapse
Nice anwser

As info..... This ROM supports RRO.....so the older Layers Manager will work to theme this beast!!!

T311 cant detect SIM. Logcat coming soon (Clean flash)

It also lag a little bit when open settings, play store etc (I mean animation, you can turn off it). And Battery is drain bcs miscellaneous bug. Here is t311's logcat

gr8nole said:
First build for T311 is up.
Give it a test and post logcat with any error reports.
Click to expand...
Click to collapse
Can you update Linux kernel to new version?

Бахрам Байрамза said:
Can you update Linux kernel to new version?
Click to expand...
Click to collapse
If it still can run great, so dont need to update it. Dont waste time

Ah new bug: Cant access external storage with every file explorer even file manager

Noob mistake or perm issues ?
Hello,
First of all, thanks for all the awesome work you have been doing with this build @gr8nole !
I needed a different/newer ROM for my tablet and have been waiting for a while to finally test one. :good::good::good:
Not sure if I need to modify or configure it properly but it seems that I'm having some permission issues ? I can't download and then save files from within a browser or manage to bypass a few tweaks I made ( ex: tried to VPN, it connects via OpenVPN and displays correct IP Server stats, but it still uses my local IP. Also had to copy the opvn file via USB cable ).
Not complaining and I am really glad that I am able to use such a recent build on my tablet ( and it looks and runs awesome ! ). Just wondering if there's anything one could do, in order to have it running exactly like I want it to !

s3vla said:
Hello,
First of all, thanks for all the awesome work you have been doing with this build @gr8nole !
I needed a different/newer ROM for my tablet and have been waiting for a while to finally test one. :good::good::good:
Not sure if I need to modify or configure it properly but it seems that I'm having some permission issues ? I can't download and then save files from within a browser or manage to bypass a few tweaks I made ( ex: tried to VPN, it connects via OpenVPN and displays correct IP Server stats, but it still uses my local IP. Also had to copy the opvn file via USB cable ).
Not complaining and I am really glad that I am able to use such a recent build on my tablet ( and it looks and runs awesome ! ). Just wondering if there's anything one could do, in order to have it running exactly like I want it to !
Click to expand...
Click to collapse
For browser downloading, you need to give the browser app "storage" permission, then may need a reboot for correct permission to apply.
Not sure about the vpn stuff.

Database Info

welcome