[ROM][CM-13.0][6.0] Temasek's UNOFFICIAL Builds

[ROM][CM-13.0][6.0] Temasek's UNOFFICIAL Builds - Moto G Android Development

Main Download (AndroidFileHost) [Click here]
Open GApps [6.0]
Flash this to enable root access
SuperSU
CM13 Build
Build Version: v1.4
Android Version: 6.0
For the most up to date changelog please visit:
Temasek’s CM13 Github Changelog

Wifi shows on battery usage chart
1. Lollipop and prior versions of android, "Allow wifi scanning" option was in advanced wifi but now moved to "Location" settings under scanning option (top right corner)
2. Turn off "Allow wifi scanning" to remove the issue.
Help! Miscellaneous is draining my battery!
Miscellaneous itself is not some mystical process that drains battery. It's showing the difference between estimated battery drain and actual battery drain (so more like a summation of all of the miscellaneous processes that drained the battery unexpectedly).
Work In Progress. Will be updated as comments are added.
When reporting a bug, Please Include:
- Your device variant and model number.
- Your bootloader version, baseband, etc.
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel/Build, etc.).
Please read all of the OP before you post. Do not report issues on previous builds only on the latest.

U personally flashed SuperSU ?..because in latest nightlies SuperSU gives bootloop.
Inbuilt cm root works without any issues
Sent from my Moto G

sathish saju said:
U personally flashed SuperSU ?..because in latest nightlies SuperSU gives bootloop.
Inbuilt cm root works without any issues
Sent from my Moto G
Click to expand...
Click to collapse
I did flash 2.52, no problems at all. Although I'd like to state that first I let the ROM boot, enabled root, and then flashed supersu

Request for Mirrors
Hi, tried to download from Renderserver many times, but the d/l fails always. Can you please provide any other mirror, AFH for example? Thanks.

Aayushya said:
I did flash 2.52, no problems at all. Although I'd like to state that first I let the ROM boot, enabled root, and then flashed supersu
Click to expand...
Click to collapse
?
Sent from my Moto G

soumitpl48 said:
Hi, tried to download from Renderserver many times, but the d/l fails always. Can you please provide any other mirror, AFH for example? Thanks.
Click to expand...
Click to collapse
Done, removed renderserver link, it was slow for me as well.

Is WiFi working properly ?
Its not working for me on other Rom.
Thanks

mangesh511 said:
Is WiFi working properly ?
Its not working for me on other Rom.
Thanks
Click to expand...
Click to collapse
Working
Sent from my Moto G

sathish saju said:
Working
Sent from my Moto G
Click to expand...
Click to collapse
wifi is not connecting .this issue i faced on cyanpop/candy rom too.
do i need to do anything for wifi.

What is permissions fix?

mangesh511 said:
wifi is not connecting .this issue i faced on cyanpop/candy rom too.
do i need to do anything for wifi.
Click to expand...
Click to collapse
If your can't connect to WPA2 Enterprise WiFi(need id and password,not only need password) after update to 6.0,
see the link:http://forum.xda-developers.com/goog...3#post63300413
go to \data\misc\wifi\ and edit wpa_supplicant.conf,add this line to your eduroam or wpa-eap network:
phase1="tls_disable_tlsv1_2=1"
I can connect by this way.

sathish saju said:
Working
Sent from my Moto G
Click to expand...
Click to collapse
ysop said:
If your can't connect to WPA2 Enterprise WiFi(need id and password,not only need password) after update to 6.0,
see the link:http://forum.xda-developers.com/goog...3#post63300413
go to \data\misc\wifi\ and edit wpa_supplicant.conf,add this line to your eduroam or wpa-eap network:
phase1="tls_disable_tlsv1_2=1"
I can connect by this way.
Click to expand...
Click to collapse
thanks @ysop.will try this.
so this is known bug.

Falcon xt1032, latest Hurtsky kernel, dialer v. 5.1.1_25 , all authorizations given, baseband MSM8626BP_1032.390.81.01P, pico open gapps.
I'm facing dialer fc, calls start and I can hear them and talk but no notification of incoming calls too. Anybody know hot to solve this? I can provide logcat too.
EDIT: Upgraded radio to 3116.98.00R but still no results.
EDIT2: Re-cleaned and re-flashed everything, dialer fc still there.

Hello everyone. This is my 2nd post in these forums(the first one being in the Q&A section). I've searched for a ROM with Android 6 for the xt1033 (Dual Sim) for my gf and I have chosen this. It seems the less bloated(compared to CyanPop) and also such a thread exists for the Nexus 4(I have no idea who Temasek is xD but I believe the ROM will be great from what I heard on the Nexus 4 forum)
Anyway, I was a good boy and read the OP and everything that I was supposed to read.
The thing is, I didn't find a post that explains the 'bugs' that exist.
Does Camera work(both front and back)? Does video work? Does 3G work? It's not for me, but for my gf and I don't want to fk her phone up as it's not mine.
Thanks a lot for your time.

fr3quency said:
Hello everyone. This is my 2nd post in these forums(the first one being in the Q&A section). I've searched for a ROM with Android 6 for the xt1033 (Dual Sim) for my gf and I have chosen this. It seems the less bloated(compared to CyanPop) and also such a thread exists for the Nexus 4(I have no idea who Temasek is xD but I believe the ROM will be great from what I heard on the Nexus 4 forum)
Anyway, I was a good boy and read the OP and everything that I was supposed to read.
The thing is, I didn't find a post that explains the 'bugs' that exist.
Does Camera work(both front and back)? Does video work? Does 3G work? It's not for me, but for my gf and I don't want to fk her phone up as it's not mine.
Thanks a lot for your time.
Click to expand...
Click to collapse
To be honest, this Rom is even more stable than official CM nightlies in my opinion. Camera, Dual sim, everything's smooth AF. Running it as a daily driver, no issues yet, just remember to grant proper permissions to apps.
Oh, and you might want to first use the inbuilt root app, before flashing supersu, just in case.

No system ui tuner in settings??

Rocketval said:
Falcon xt1032, latest Hurtsky kernel, dialer v. 5.1.1_25 , all authorizations given, baseband MSM8626BP_1032.390.81.01P, pico open gapps.
I'm facing dialer fc, calls start and I can hear them and talk but no notification of incoming calls too. Anybody know hot to solve this? I can provide logcat too.
EDIT: Upgraded radio to 3116.98.00R but still no results.
EDIT2: Re-cleaned and re-flashed everything, dialer fc still there.
Click to expand...
Click to collapse
Yeah same here , dialer FCs

Is there Bluetooth stuttering in this rom like other CM 13 ROM's? Just asking before flashing. Thanks in advance!
Sent from my SM-G900T using Tapatalk

Related

[ROM] CM13 for T31x

Thread Closed....All support focus has moved to Lineage.
I am creating this thread as a place to discuss development of unofficial CM13 builds for the T31x devices. Those of you that have been around here for a while already know that I tend to get busy with other stuff and disappear a times. So, with that said, if you would like to contribute to the development of this rom, please feel free to do so. I can make you a contributor and you will have the ability to modify this OP as required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Standard Disclaimer
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
IRC Channel for Development Chat: I am usually on weekdays 7-4 EST
http://webchat.freenode.net/?channels=Tab3Dev
What Doesn't Work:
- Bluetooth has audio issues
- External SDCard will not work as "internal" storage
INSTALLATION
- Make sure you're running latest TWRP 3.0.2-0
- Copy GApps and CM ZIPs to your internal or external SDCard
- Boot into Recovery
- Perform WIPE:
In TWRP, select Wipe --> Advanced Wipe.
Check Dalvik/ART Cache, System, Cache, and Data
Swipe to Wipe
- Flash CM zip
- Flash GApps zip
- Reboot
Updating to a newer version of THIS rom ("dirty" flash)
- Boot into Recovery
- Flash CM zip (no need to re-flash gapps or wipe anything)
- Reboot
If you have any issues after doing a "dirty" flash, do a clean install before reporting any problems.
Downloads
CyanogenMod
Builds: https://www.androidfilehost.com/?w=files&flid=44848
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 6.0 zip) - now on tap needs mini or higher.
HEADS UP: Be sure you flash the gapps package when flashing your rom. If you boot your rom, then try to flash gapps later, you will have issues.
CHANGELOG
For a list of CM changes, you can review the i9300 nightly changelog located HERE.
The i9300 is a similar platform to ours, so most of what is listed there will be applicable for us, unless it is i9300 device specific.
SCREENSHOTS
Coming Soon
DEVICE SPECIFIC SOURCES
- Kernel: https://github.com/gr8nole/android_kernel_samsung_smdk4x12
- Common T31x device: https://github.com/gr8nole/android_device_samsung_lt01-common
- SM-T311: https://github.com/gr8nole/android_device_samsung_lt013g
- SM-T310: https://github.com/gr8nole/android_device_samsung_lt01wifi
- SM-T315: https://github.com/gr8nole/android_device_samsung_lt01lte
CONTRIBUTORS
- CyanogenMod Team, CyanogenMod and AOSP contributors.
- @ketut.kumajaya, for his earlier work in the Tab 3 community.
- @tohenk, for his CM-12.1 Samsung Galaxy Tab 3 8.0 builds/fixes.
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
XDA:DevDB Information
CM13 for T31x, ROM for the Samsung Galaxy Tab 3 8.0
Contributors
gr8nole
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: KitKat Firmware
Based On: CyanogenMod 13
Version Information
Status: Beta
Created 2015-12-14
Last Updated 2017-01-03

Reserved
Tips:
If you flash a gapps package and get a force close on the keyboard, boot into TWRP, mount system, then choose the file manager option and delete /system/lib/libjni_latinimegoogle.so Fixed
You will need to give your browser permission to access storage before you can download anything with it. Go to Settings-Apps to adjust permissions.
If you flash a Gapps package with Google Camera, the camera may not work. Many i9300 users are reporting that the new Google Camera needs an API that we do not have and therefore will not work.
When connecting the tablet to a computer to transfer files, it will always initially be in "Charging" mode and you will need to select "File Transfer" mode by clicking on the notification on the tablet.
Camera - If you get "can't connect to camera" message, download Mediaserver Killer app from store and use it.
Netflix - If you get lines in your Netflix video, edit your data usage settings on the Netflix website to Low or Medium. I created a "mobile" profile and set the data usage to "low"; then selected that profile in the app and I no longer get the lines on the videos.
Google Movies - If you get a "license error", you need to give the Google Movies app permission to access "phone"; then reboot.
I have noticed that the latest version of Google Movies does not work (at least on my T310). It always gives the "failed to fetch license" error when trying to play purchased movies. I found this same problem when I first starting using CM13, but it could be solved then by giving the app permission to access "phone" in the permission settings for that app (then reboot). But, the newest version of the Google Movies and TV app does not request these permissions, so the "fix" for the previous version does not work.
If you want to use Google Movies and TV app, you can install the previous version (3.10.10) and allow the required permissions (then reboot) to get it working again.
I will not post the apk because people have varying ideas about installing apps that are not installed directly from the app store, but you can find the previous app on APK Mirror website.

Source Info
What I used to build CM13:
Please don't ask how to setup a build environment in this thread. There are plenty of guides that will instruct you how to setup a build environment for CM. I will not repeat those instructions, only give you the additional info required for building for our devices.
In addition to the full repo of CM13 sources, I used the following from my git:
lt01-common device tree
lt01wifi device tree
lt013g device tree
lt01lte device tree
smdk4x12 kernel source
proprietary vendor blobs
I also used from CM sources:
smdk4412-common device tree
Samsung Service Mode
Samsung Hardware

Will test on T311 2morrow. :thumbup:

Will test on the t310 as soon as I can I am especially anxious of the Bluetooth headset problem that was evident during 12.X (and other custom roms)
Edit: Tried it out. Bluetooth is still a bit messy for headsets. Unless I am very close (less than 2 meters) - so far.
Edit2: Welcome Back Gr8Nole - missed you (for Dev reasons)

Great job gr8nole. One problem that I encounter that is found on lollipop too is YouTube having lag. I really like to use it but in lollipop and marshmallow there's still problems. Still, thanks a lot for keeping this device up-to-date with the latest version of android. Thank you! ?☺?

luisoriera said:
Crear job gr8nole. Can you please fix YouTube
Click to expand...
Click to collapse
YouTube works for me. What problem are you having?
Sent from my SM-G920V using Tapatalk

He mean when watching videos on youtube for a long time it having lag
---------- Post added at 07:49 AM ---------- Previous post was at 07:00 AM ----------
Device cant detect sim card on sm t311 everthing else is perfect

Thanhtho96 said:
He mean when watching videos on youtube for a long time it having lag
---------- Post added at 07:49 AM ---------- Previous post was at 07:00 AM ----------
Device cant detect sim card on sm t311 everthing else is perfect
Click to expand...
Click to collapse
can it be just upgraded without wiping the data on cm 12.1.1? and were you able to get the sim get detected?
thanks

sandeep0048 said:
can it be just upgraded without wiping the data on cm 12.1.1? and were you able to get the sim get detected?
thanks
Click to expand...
Click to collapse
oh I had a clean flash

Thanhtho96 said:
oh I had a clean flash
Click to expand...
Click to collapse
What about sim card is it getting detected? Pls share ss...
Sent from my SM-T311 using XDA Forums

sandeep0048 said:
What about sim card is it getting detected? Pls share ss...
Sent from my SM-T311 using XDA Forums
Click to expand...
Click to collapse
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?

Thanhtho96 said:
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Click to expand...
Click to collapse
Let me chk.... Downloading it now....will report after sometime...?
Sent from my SM-T311 using XDA Forums
By that time can you please share few SS.. Would like to have a look..

In UI it's not changed so much, but it's working much faster than lollipop

Ya I love new open apps animation

marek_poland said:
In UI it's not changed so much, but it's working much faster than lollipopView attachment 3577095View attachment 3577096View attachment 3577092View attachment 3577093
Click to expand...
Click to collapse
Did you upgraded it or had a new fresh install?
Sent from my SM-T311 using XDA Forums

Fresh new, but I'm on T310. I made a factory reset in TWRP without format system. I was on CM12.1
Sent from my LG-D802 using Tapatalk

marek_poland said:
Fresh new, but I'm on T310. I made a factory reset in TWRP without format system. I was on CM12.1
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Oh ok...so evrything is working fine right accept d video recording gps and youtube?
Sent from my SM-T311 using XDA Forums

I'm not using camera neither gps, but youtube works perfectly, no lags, no freeze
Just for info: screen cast still not working
Sent from my LG-D802 using Tapatalk

marek_poland said:
I'm not using camera neither gps, but youtube works perfectly, no lags, no freeze
Just for info: screen cast still not working
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Oh ok....
Sent from my SM-T311 using XDA Forums
---------- Post added at 04:10 PM ---------- Previous post was at 03:26 PM ----------
Thanhtho96 said:
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Click to expand...
Click to collapse
Ok... I installed without wiping data but sim issue is still the same...
Dint detect the sim.
Secondly i only have one mmc but its showing 2 diferent cards one is 5gb and another one shows 1.5gb n internal is different so altogether its showing 3 memories???... Gplay services crashes might b i have not installed or updated gapps.. Not sure. Bt d main issue is sim doesn't gets detected...
Sent from my SM-T311 using XDA Forums

[ROM][i9515][6.0.1]Temasek's UNOFFICIAL Builds[22/01][jfvelte]

[ROM][i9515][6.0.1]Temasek's UNOFFICIAL Builds[11/03][jfvelte]
Main Download (AndroidFileHost) [Click here]
Open GApps [6.0]
Enable root access in developer options
CM13 Build
Build Version: v1.7
Android Version: 6.0
For the most up to date changelog please visit:
Temasek’s CM13 Github Changelog

Wifi shows on battery usage chart
1. Lollipop and prior versions of android, "Allow wifi scanning" option was in advanced wifi but now moved to "Location" settings under scanning option (top right corner)
2. Turn off "Allow wifi scanning" to remove the issue.
Help! Miscellaneous is draining my battery!
Miscellaneous itself is not some mystical process that drains battery. It's showing the difference between estimated battery drain and actual battery drain (so more like a summation of all of the miscellaneous processes that drained the battery unexpectedly).
Work In Progress. Will be updated as comments are added.
When reporting a bug, Please Include:
- Your device variant and model number.
- Your bootloader version, baseband, etc.
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel/Build, etc.).
Please read all of the OP before you post. Do not report issues on previous builds only on the latest.

Hello @srisurya95, great job and congratulations to your ROM!!! In CM13 of sombree i have issue with bluetooth headset, make a call bul the sound isn't send to headset, only S4 speaker. In its ROM is also with this problem?

alexspfc2004 said:
Hello @srisurya95, great job and congratulations to your ROM!!! In CM13 of sombree i have issue with bluetooth headset, make a call bul the sound isn't send to headset, only S4 speaker. In its ROM is also with this problem?
Click to expand...
Click to collapse
Yes,should be the same...Ill post it when it is fixed

Could you please take a look into mmc1_detect wakelock? This seems to drain my battery over night from 100% to 90% within 5 to 6 hours. I did not have this on the ROM from sombree.

wesley18 said:
Could you please take a look into mmc1_detect wakelock? This seems to drain my battery over night from 100% to 90% within 5 to 6 hours. I did not have this on the ROM from sombree.
Click to expand...
Click to collapse
ok I will

srisurya95 said:
ok I will
Click to expand...
Click to collapse
Hello, great work, any plans to upgrade?

Thanks man I'll be checking this rom

could you please build this rom to 5.1.1 upon checking the 6.0.1 making some testing I found that the new android os 6.0.1 sucks when it comes to external storage. I flash back to sombree's 5.1.1 but hopefully someone will create rom like this to Lollipop

Hellow
How r you @srisurya95
Can u pls update this ROM with latest cm13
I like this rom and really wanna flash but needs to b updated man...

marco978 said:
Hellow
How r you @srisurya95
Can u pls update this ROM with latest cm13
I like this rom and really wanna flash but needs to b updated man...
Click to expand...
Click to collapse
OK I will

srisurya95 said:
OK I will
Click to expand...
Click to collapse
thanks I'll b waiting man
cheers

New build up!
I can't post changelog because so many new features are added and I skipped many builds....I will post changelog from next build

srisurya95 said:
New build up!
I can't post changelog because so many new features are added and I skipped many builds....I will post changelog from next build
Click to expand...
Click to collapse
thank man appreciate it
but i just flashed vrtoxin
anyway its already downloading
thanks for ur amazing roms
i can use cm13 kernel with this rom right?

marco978 said:
thank man appreciate it
but i just flashed vrtoxin
anyway its already downloading
thanks for ur amazing roms
i can use cm13 kernel with this rom right?
Click to expand...
Click to collapse
I use the same one

srisurya95 said:
I use the same one
Click to expand...
Click to collapse
i mean @sombree had uploaded a separate .img file for kernel
u could overclock cpu/gpu underclock it
and many more nice features
this rom is based on cm so it should right
edit:anyway i flashed the img on this rom and result was bootloop
hmm...?

marco978 said:
i mean @sombree had uploaded a separate .img file for kernel
u could overclock cpu/gpu underclock it
and many more nice features
this rom is based on cm so it should right
edit:anyway i flashed the img on this rom and result was bootloop
hmm...?
Click to expand...
Click to collapse
Because it is a .img made just for cm and without anykernel script

srisurya95 said:
Because it is a .img made just for cm and without anykernel script
Click to expand...
Click to collapse
well...uhmm...
can u port it or something
cause that kernel was great
i liked the sound tweaks and everything else from that kernel
ps: i find some battery drain on latest build
if u can look into that for next build i would really apreciate that
and if i clear battery stats .bin
could it help me?
i read that vrtoxin has great an awesome battery time
can u make this rom battery friendly too?
anyway man thanks for this rom and all ur hard work
hope u keep updating it...

Hi, can i install on GT-I9505?
Is it compatible?

[ROM][i9305][6.0.1][GELLO] Temasek's UNOFFICIAL CyanogenMod 13 [UNOFFICIAL]

Reserved
My AFH Folder for Temasek ROM
My Google Drive Folder for Temasek ROM
Open GApps [6.0.1]
MD5 file for ROM can be found on AFH.
Flash this to enable root access
SuperSU
CM13 Build
Build Version: v10.8
Android Version: 6.0.1_r61
For the most up to date changelog please visit:
Temasek’s CM13 Github Commits
I will also be including my own changelog in future builds.No difference from Temasek changelogs.

Reserved
Multiple RIL Implementation
Since I am using @p.a.n sources multiple RIL implementation is active. However changes were made to both device, kernel and vendor sources which may have broken some things, because it did break RIL for me (Sometimes).
Multiple RIL implementation
In this ROM, there are more then one RIL implementations. None of them is perfect, but you can choose, which one of them works better for you. The first RIL implementation is the usual CM 12.1 based one (this is the default one), the second one is based on proprietary files extracted from stock 4.4.4 ROM downloaded from sammobile.com (I9305XXUFOB2_I9305PHNFOB2_I9305XXUFOA1_HOME.tar.md5), the third is based on proprietary files from TheMuppets, with one small change (see here for details). To switch between them open shell (over adb, or using the build in app, or whatever you like) and execute command ril. You will see something like this:
Code:
Select RIL implementation:
* 1 - CM 12.1 based
2 - Stock 4.4.4 based
3 - TheMuppets based
x - quit
?
I recommend you to change and play with the different implementations, however do keep in mind some things:
1. Stock 4.4.4 based IS NOT WORKING. You will notice RIL dies after reboot.
2. I personally use TheMuppets, but CM 12.1 is occasionally better. Do note that this is my personal preference, so do play with both implementations.
Titanium Backup - External SD Card problems (This Folder is NOT Writeable)
http://www.titaniumtrack.com/kb/tita...-not-writeable
Q: Is this ROM Stable?????? A: Yes. Unless stated as experimental.
Q: F2FS PLSSSSSS???? A: No.
Q: WHY NOT BOOT??? / WHY BUG???? A: Read below, and under "known issues"
Q: NEW BUILD PLS PLS PLS???? A: The weekend when Temasek finishes a new version
Some other issue?You can't just say 'x is broken!' and expect me to magically find the bug and fix it.
Here's what I need:
Steps to reproduce - I don't care if "it's simple". I want to know exactly what you were doing at the time of the bug. How'd it happen? Does it only happen on Tuesdays when watching a specific YouTube video? Include it *all*
What happened - in what way is this *not* the expected behaviour? Don't just say "it didn't play/upload/whatever". Did the entire phone crash? Did it show an error? Did it just show an endless progress indicator? Again, I need specifics here.
Logcat/last_kmsg - Include the whole thing please, and if your phone's been running for a while, give me a rough region of time when the issue happened. Use last_kmsg if your device reboots unexpectedly, otherwise use a logcat.
For more FAQ, please visit @p.a.n 's thread here and read the OP as I used his sources.
HOWEVER PLEASE DO NOT POST QUESTIONS THERE. Just check whether your question is already answered.
I will answer all bug reports/questions to this ROM on this thread however please read above and adhere.
If you want SuperSU instead stock SU, Please flash Agni Kernel smdk4412 version or Boeffla Kernel.
If you want to install GApps after bootup, please follow the steps below:
1st method
Go to recovery and wipe /system
Flash ROM, then GApps
2nd method (If you want to update GApps)
Go to recovery and follow dirty flash instructions above
Tell me

Reserved
@rodman01 @Trafalgar Square I did it haha
@p.a.n Thanks so much for source code
@temasek @arter97 for being creators of the ROM
and of course, to CM Slim AOKP Omni and whoever else helped in this ROM

Last one, just in case.

What are the differences compared to normal CM?

dawidd6 said:
What are the differences compared to normal CM?
Click to expand...
Click to collapse
Check the change log. There are a lot of features kanged from other ROMS
Why not try it out and see for yourself?

with f2fs support will be Perfect

So many roms for our beloved s3. This is awesome.
I think that bug with gapps "setup wizard" crashing is depending on the gapps package and not the roms fault. :good:

JD. A said:
So many roms for our beloved s3. This is awesome.
I think that bug with gapps "setup wizard" crashing is depending on the gapps package and not the roms fault. :good:
Click to expand...
Click to collapse
Yeah it only happens with open gapps, but I don't recommend bank or Delta gapps because it's not tested haha... apparently the updater script is in the ROM, but I'm outside so I'm lazy to post instructions... will do when I get home

M4tEUSh said:
with f2fs support will be Perfect
Click to expand...
Click to collapse
Nope I'm sorry. I'm not a supporter of f2fs, I can't test it due to me being lazy to backup data/media )) and lastly it doesn't compile (main problem)

Thanks!
Add this to cm.mk
Code:
# Custom unofficial build tag
TARGET_UNOFFICIAL_BUILD_ID := temasek
Then you ZIP name will be cm-13.0-20160522-UNOFFICIAL-temasek-i9305-V8.6.zip

Trafalgar Square said:
Thanks!
Add this to cm.mk
Then you ZIP name will be cm-13.0-20160522-UNOFFICIAL-temasek-i9305-V8.6.zip
Click to expand...
Click to collapse
Why thank me? Anyways noted, will do that in next build.

@limjh16 root access works without flashing supersu. Just enable in developer options. The rom seems to be working fine.

JD. A said:
@limjh16 root access works without flashing supersu. Just enable in developer options. The rom seems to be working fine.
Click to expand...
Click to collapse
Yeah I did mention if u want to opt for SuperSU instead stock su

limjh16 said:
Yeah I did mention if u want to opt for SuperSU instead stock su
Click to expand...
Click to collapse
Oh I must have misunderstood then. The rom works great, had some random reboot at startup when selecting language. Other than that it's cool. I really like that you used p.a.ns multiple ril implementation too. It seems to be working better for me than the other roms.

JD. A said:
Oh I must have misunderstood then. The rom works great, had some random reboot at startup when selecting language. Other than that it's cool. I really like that you used p.a.ns multiple ril implementation too. It seems to be working better for me than the other roms. ????
Click to expand...
Click to collapse
Well, if that's so enjoy your stay! I will be regularly providing builds though don't expect any optimisations as I'm busy with another rom now haha

I will not be providing v8.8 due to problems in kernel by cm sources which disallows wifi to be connected.

congratulations @limjh16 been waiting for you to release your temesek:good:

alias_ z3d said:
congratulations @limjh16 been waiting for you to release your temesek:good:
Click to expand...
Click to collapse
Thanks! Finally fixed my errors lol

[ROM] LineageOS-14.1 for T31x

I am creating this thread as a place to discuss development of unofficial LineageOS14.1 builds for the T31x devices. Those of you that have been around here for a while already know that I tend to get busy with other stuff and disappear a times. So, with that said, if you would like to contribute to the development of this rom, please feel free to do so. I can make you a contributor and you will have the ability to modify this OP as required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Standard Disclaimer
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
All the source code for LineageOS is available in the Lineage Github repo. And if you would like to contribute to LineageOS, please visit the Gerrit Code Review.
What Doesn't Work:
- flash it and see
==============================
If you want to use this tablet for phone calls, see THIS post before installing.
==============================
==============================
WIFI WORKS - BUT, If you have an issue with wifi not working AND your mac address shows a value starting with 02:00:00, do not post about it UNLESS you take a dmesg log (immediately after a reboot) and post it with your message. Google can tell you how to take dmesg log or see THIS thread.
==============================
INSTALLATION
- Make sure you're running latest TWRP version
- Copy GApps and rom ZIPs to your internal or external SDCard
- Boot into Recovery
- Perform WIPE:
In TWRP, select Wipe --> Advanced Wipe.
Check Dalvik/ART Cache, System, Cache, and Data
Swipe to Wipe
- Flash rom zip
- Flash GApps zip
- Reboot
Updating to a newer version of THIS rom ("dirty" flash)
- Boot into Recovery
- Flash rom zip (no need to re-flash gapps or wipe anything)
- Reboot
If you have any issues after doing a "dirty" flash, do a clean install before reporting any problems.
Downloads
gr8nole no longer builds. tigger 2014's builds pass safetynet and cuberio1 builds only occasionally.
LineageOS
Old Builds by gr8nole : https://www.androidfilehost.com/?w=files&flid=140570
Builds by cuberio1 : Google Drive
Builds by tigger2014 : https://androidfilehost.com/?a=show&w=files&flid=281549
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 7.1 zip) I use nano.
HEADS UP: Be sure you flash the gapps package when flashing your rom. If you boot your rom, then try to flash gapps later, you will have issues.
CHANGELOG
For a list of LineageOS source changes, you can review the i9300 nightly changelog located HERE.
The i9300 is a similar platform to ours, so much of what is listed there will be applicable for us, unless it is i9300 device specific.
DEVICE SPECIFIC SOURCES
- Kernel: https://github.com/gr8nole/android_kernel_samsung_smdk4x12
- Common T31x device: https://github.com/gr8nole/android_device_samsung_lt01-common
- SM-T311: https://github.com/gr8nole/android_device_samsung_lt013g
- SM-T310: https://github.com/gr8nole/android_device_samsung_lt01wifi
- SM-T315: https://github.com/gr8nole/android_device_samsung_lt01lte
- Vendor files: https://github.com/gr8nole/proprietary_vendor_samsung
CONTRIBUTORS
- LineageOS Team, CyanogenMod and AOSP contributors.
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
XDA:DevDB Information
[ROM] LineageOS-14.1 for T31x, ROM for the Samsung Galaxy Tab 3 8.0
Contributors
gr8nole, cuberio1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: KitKat Firmware
Based On: LineageOS
Version Information
Status: Beta
Created 2016-11-04
Last Updated 2019-03-24

Reserved
Make sure you follow the installation instructions.
Do not ask about dirty flashing.
This is a very early build, so please don't start reporting a bunch of little bugs. I know there are things that don't work.
Wifi does work

Screenshots

Great work. Thank you!

Thanks for all the hard work!!!
Sent from my SM-G935T using XDA-Developers mobile app

Whaoo Thanks.
I tried it, wifi working, bluetooth also. I had difficulties with flashing because TWRP was not seeing my filesystem, so I flashed first with flashify, then formated my sd card, then reinstalled.
More details coming
Edit :
Internet, YouTube, Facebook, Dropbox, GPS, downloads working :
Not alpha anymore

You are the man!!!!

Awesome! Thanks!
Thanks for all the gr8t & hard work. I have flashed to CM14.1 on my Galaxy Tab 3.
What is working on my tab 3:
Wifi, bluetooth, gps, camera/video recorder!!!
All seems to be in order. Thanks again Gr8nole!!!

First build for T311 is up.
Give it a test and post logcat with any error reports.

gr8nole said:
First build for T311 is up.
Give it a test and post logcat with any error reports.
Click to expand...
Click to collapse
Can I have a dirty flash from cm13? I know should have a clean but just curious.

Thanhtho96 said:
Can I have a dirty flash from cm13? I know should have a clean but just curious.
Click to expand...
Click to collapse
Test a dirty flash. If it works then all good and if doesn't, clean flash it again.
sent from my beast, Samsung Galaxy Tab 3 8" T311 (old but gold?) running V5 S5 ROM using Tapatalk.

Ibbi786 said:
Test a dirty flash. If it works then all good and if doesn't, clean flash it again.
sent from my beast, Samsung Galaxy Tab 3 8" T311 (old but gold) running V5 S5 ROM using Tapatalk.
Click to expand...
Click to collapse
Nice anwser

As info..... This ROM supports RRO.....so the older Layers Manager will work to theme this beast!!!

T311 cant detect SIM. Logcat coming soon (Clean flash)

It also lag a little bit when open settings, play store etc (I mean animation, you can turn off it). And Battery is drain bcs miscellaneous bug. Here is t311's logcat

gr8nole said:
First build for T311 is up.
Give it a test and post logcat with any error reports.
Click to expand...
Click to collapse
Can you update Linux kernel to new version?

Бахрам Байрамза said:
Can you update Linux kernel to new version?
Click to expand...
Click to collapse
If it still can run great, so dont need to update it. Dont waste time

Ah new bug: Cant access external storage with every file explorer even file manager

Noob mistake or perm issues ?
Hello,
First of all, thanks for all the awesome work you have been doing with this build @gr8nole !
I needed a different/newer ROM for my tablet and have been waiting for a while to finally test one. :good::good::good:
Not sure if I need to modify or configure it properly but it seems that I'm having some permission issues ? I can't download and then save files from within a browser or manage to bypass a few tweaks I made ( ex: tried to VPN, it connects via OpenVPN and displays correct IP Server stats, but it still uses my local IP. Also had to copy the opvn file via USB cable ).
Not complaining and I am really glad that I am able to use such a recent build on my tablet ( and it looks and runs awesome ! ). Just wondering if there's anything one could do, in order to have it running exactly like I want it to !

s3vla said:
Hello,
First of all, thanks for all the awesome work you have been doing with this build @gr8nole !
I needed a different/newer ROM for my tablet and have been waiting for a while to finally test one. :good::good::good:
Not sure if I need to modify or configure it properly but it seems that I'm having some permission issues ? I can't download and then save files from within a browser or manage to bypass a few tweaks I made ( ex: tried to VPN, it connects via OpenVPN and displays correct IP Server stats, but it still uses my local IP. Also had to copy the opvn file via USB cable ).
Not complaining and I am really glad that I am able to use such a recent build on my tablet ( and it looks and runs awesome ! ). Just wondering if there's anything one could do, in order to have it running exactly like I want it to !
Click to expand...
Click to collapse
For browser downloading, you need to give the browser app "storage" permission, then may need a reboot for correct permission to apply.
Not sure about the vpn stuff.

[OFFICIAL] CyanogenMod 14.1 - mi4 [cancro]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
Wiki
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/cancro_Info
Installation
First time CyanogenMod 14.1 installation on your Xiaomi Mi4:
Read the official Wiki page
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot
Push GApps (arm) and the CM 14.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the CM 14.1 zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of CyanogenMod (even from 13.0 and 12.1) :
Push the new CM 14.1 zip to your SD card
Boot into Recovery
Flash the CM 14.1 zip from SD card
Flash the most recent GApps for 7.1 if you are upgrading from earlier android version
Reboot
Supported devices
Mi3w
Mi4 (WCDMA)
These devices are supported, but the maintainer WILL NOT fix bugs that are reproduceable just in those devices
Mi4 LTE
Downloads
Lastest Nightly : http://get.cm/get/cancro-latest.zip
Lastest Recovery (Nightly) : http://get.cm/get/cancro-latest-recovery.img
Lastest Snapshot : http://get.cm/get/cancro-snapshot.zip
Lastest Recovery (Snapshot) : http://get.cm/get/cancro-snapshot-recovery.img
-----------------------------------------------------------------------------
Google Apps (arm): wiki.cyanogenmod.org/w/gapps
All the builds: http://download.cyanogenmod.org/?device=cancro
Reporting bugs
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs reported in the lastest 5 pages of this thread. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* Model (Mi3 / Mi4 / Mi4 LTE)
* CM version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
I get error 7 while flashing this rom, what does it mean?
Read what the recovery says: "You're running on an unsupported (Kitkat) baseband". In order to flash the lastest CM builds you must have Miui MM baseband and partition layout installed. Visit http://bit.ly/cancroCMBaseband to learn how to update these
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all DO NOT flash any SuperSu/SuperUser/SuperMan zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Why no <insert miui feature here>?
Because this is CyanogenMod
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[OFFICIAL] CyanogenMod 14.1 - mi4 [cancro], ROM for the Xiaomi Mi 4
Contributors
linuxxxx
Source Code: https://github.com/cyanogenmod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: MiUi MM baseband and partition layout
Version Information
Status: Nightly
Created 2016-11-08
Last Updated 2016-11-14

Basic functionality is working fine. Non of the sensors are working.

sensor fix for cm13 not working here...

All sensors working here. And fix is merged for you guys.
Charging is crippled, though. Recommend all of you daily drivers wait.

We have to wait for at least one week to get everything done. They released it early this time so they'll fix the bugs daily
Visit this page for log files
https://www.cmxlog.com/14.1/cancro/
Everything that will be updated will be listed here

The new build is great. It has been one day. No issues. Battery life is great. All sensors are working. Camera quality is not bad. And the rom is for daily drivers. Only problem is slow charging issue. I hope it will be fixed soon. Get into the nest guys

Someone please, can upload a photo taken with this ROM ? I need see the quality , thanks
Enviado desde mi MI 4LTE mediante Tapatalk

Hi, is there any way to see if phone is unlocked? I got phone with custom MIUI 8 from czech developers with pre-installed TWRP, does that mean that phone is unlocked? Thanks I guess it is, because I can manually flash new updates of MIUI 8 through TWRP. Btw. really like this rom!

TrueMS said:
Hi, is there any way to see if phone is unlocked? I got phone with custom MIUI 8 from czech developers with pre-installed TWRP, does that mean that phone is unlocked? Thanks I guess it is, because I can manually flash new updates of MIUI 8 through TWRP. Btw. really like this rom!
Click to expand...
Click to collapse
AFAIK Mi4 models are not bootloader locked from factory. BUT if you already have TWRP installed then it is definitely unlocked.

Okay, thank you so much i thought the same but I wanted to be sure and how is it with going back to MIUI? Can I just flash MIUI in TWRP to go back?

TrueMS said:
Okay, thank you so much i thought the same but I wanted to be sure and how is it with going back to MIUI? Can I just flash MIUI in TWRP to go back?
Click to expand...
Click to collapse
Yes. But once you flash you'll never like miui. CM is better in every way. I'm using CM from 2 years. You'll like it

rahulkamma14 said:
Yes. But once you flash you'll never like miui. CM is better in every way. I'm using CM from 2 years. You'll like it
Click to expand...
Click to collapse
I know, I was using CM on my Zenfone 5 and S3 mini, it's awesome, but I kinda like MIUI, our czech version of MIUI is debloated and without annoying apps and a lot faster, and also im asking because there can be some breaking bug so I will have to go back to the MIUI.

TrueMS said:
I know, I was using CM on my Zenfone 5 and S3 mini, it's awesome, but I kinda like MIUI, our czech version of MIUI is debloated and without annoying apps and a lot faster, and also im asking because there can be some breaking bug so I will have to go back to the MIUI.
Click to expand...
Click to collapse
i also dont like miui since i flash cm based rom
btw if u want debloated miui there are 2 site for that xiaomi.eu and mi-globe.com . go ahead
edit : u need twrp to flash miui from both site

TrueMS said:
Okay, thank you so much i thought the same but I wanted to be sure and how is it with going back to MIUI? Can I just flash MIUI in TWRP to go back?
Click to expand...
Click to collapse
you can flash official firmware without TWRP or you can head to the Xiaomi.eu and flash the zip from twrp.
And, I'd prefer CM with 7.1 on my Mi4 but since Qualcomm not releasing the vulcan files for our SoC, not sure how it will affect it :/ damn you Qualcomm.

Things are working great! Except for the slow charging. *Edit* After flashing ZheurionX Kernel and Feralab script mod. Charging problem is gone and no problem with battery backup either. Now this rom is my daily driver.

epulrevo said:
Things are working great! Except for the slow charging. *Edit* After flashing ZheurionX Kernel and Feralab script mod. Charging problem is gone and no problem with battery backup either. Now this rom is my daily driver.
Click to expand...
Click to collapse
Sorry for double post, but I can't upload pic in "edit"

CM 14.1 with pixel launcher

Battery life is excellent

Mr_Bushido said:
Someone please, can upload a photo taken with this ROM ? I need see the quality , thanks
Enviado desde mi MI 4LTE mediante Tapatalk
Click to expand...
Click to collapse
Camera quality is good

Nobody is facing issues with Auto-Rotate feature?
Cheers,
Sarat

Database Info

welcome