Urgent !! My 702L was bricked - Huawei MediaPad X2

Yesterday I try to flash 703L firmware
But I want to flash back to B003 rom
I had put the dload file on micro sd , then enter HW Recovery Mode
When I loading in Recovery Mode , it said "Software install failed!"

Can I Extract the 702L B003 UPDATE , then via fastboot each file ?
Because I had try to fastboot RECOVERY.img , SYSTEM.img , BOOT.img ,CUST.img
then go to recovery mode It's said Failed again
Please Help !!!

adrianluke said:
Can I Extract the 702L B003 UPDATE , then via fastboot each file ?
Because I had try to fastboot RECOVERY.img , SYSTEM.img , BOOT.img ,CUST.img
then go to recovery mode It's said Failed again
Please Help !!!
Click to expand...
Click to collapse
Yes you need to fastboot flash b003 first then factory reset

ajsmsg78 said:
Yes you need to fastboot flash b003 first then factory reset
Click to expand...
Click to collapse
Yes , try it
But didn't work
Flash 4 image file via fast boot
Then power & + reset factory
But when I enter HW Factory Recovery , it loading a few second , then it show the error.

adrianluke said:
Yes , try it
But didn't work
Flash 4 image file via fast boot
Then power & + reset factory
But when I enter HW Factory Recovery , it loading a few second , then it show the error.
Click to expand...
Click to collapse
Before you do that, flash this cust mod in TWRP.
https://drive.google.com/file/d/0B5I_q70mNuR4T0EzTXNnTmZKd0U/view?usp=sharing

ajsmsg78 said:
Before you do that, flash this cust mod in TWRP.
https://drive.google.com/file/d/0B5I_q70mNuR4T0EzTXNnTmZKd0U/view?usp=sharing
Click to expand...
Click to collapse
TRY IT
Flash this zip in TWRP , then reboot reset factory
fastboot 4 img file (B003)
reset factory in the system(Successful)
But I want to clean Restore , So I Flash UPDATE.APP in HW Recovery Mode
A few second it show fail to update.
and go to http://www.emui.xxxxxxxxxxxxxxxxxxxxx/mod=restore
Is the hardware code change to 703L ? so I cant flash 702L firmware?
But inside About Phone , all information are correct

I think I cannot downgrade from 5.1.1 to 5.0 right now
So I had upgrade my 702L to b111 rom now
How to fix it my signal bar ? 4G logo cover the signal bar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

adrianluke said:
I think I cannot downgrade from 5.1.1 to 5.0 right now
So I had upgrade my 702L to b111 rom now
How to fix it my signal bar ? 4G logo cover the signal bar
Click to expand...
Click to collapse
The 4G logo covering the signal bar happens on the 702L. The only way I found that fixes it is changing the lcd density. Mine is at 320. Here's what mine looks like on my 702L after changing the lcd density.

ajsmsg78 said:
The 4G logo covering the signal bar happens on the 702L. The only way I found that fixes it is changing the lcd density. Mine is at 320. Here's what mine look like on my 702L after changing the lcd density.
Click to expand...
Click to collapse
Thank you

ajsmsg78 said:
The 4G logo covering the signal bar happens on the 702L. The only way I found that fixes it is changing the lcd density. Mine is at 320. Here's what mine looks like on my 702L after changing the lcd density.
Click to expand...
Click to collapse
So if we can change the status bar dpi , we can fix the problem , Right?

adrianluke said:
So if we can change the status bar dpi , we can fix the problem , Right?
Click to expand...
Click to collapse
Yeah just edit the build.prop file in your system directory and change the two lcd density lines to 320 then add a qemu.sf.lcd_density=320 line somewhere in there and reboot. You'll have a 320 density which is perfect in my opinion.

Related

Moto G XT1033 Soft Bricked, Cannot Boot To TWRP or CWM

no custom recovery loading
I am currently using moto G first generation xt1033 indian dual sim version.
I have soft bricked my phone.
WHAT I HAVE: I have access to fastboot
My bootloader is unlocked
Access to stock recovery
PROBLEM: I have tried to flash twrp , cwm and philz recovery but every time i boot into recovery mode stock recovery loads.
I cannot access USB Debugging mode since the phone is soft bricked.
I have also tried to flash stock firmware no change seen.
I would be glad if you all can help me.
@ravibhat i have read your thread and my starting problem was same as yours @lost101 please help me as well.Thank You
Ok.Post pics,videos so that we know it's the same problem.
Go to a service centre when you can and share what they've told.
did u use these steps ?
fastboot erase recovery
fastboot flash recovery ur_recover_zip_name.zip
try different versions of recovery, i suggest u use CWM V6.0.4.7
If that works, use the adb sideload feature to flash the ROM
thank you for the reply
@ankur.walia
i tried the erase recovery command this was the output
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and when i tried to lock bootloader this was the ouput
mrawal031 said:
@ankur.walia
i did not try the erase recovery command but i tried to flash it directly.
ill try this and revert i hope it wouldn't pose a problem if i directly flash the .img file
Click to expand...
Click to collapse
yes, and try the version i mentioned because i was also facing the problem like u and only this specific versions worked for me
still no change
@ankur.walia @ravibhat
i tried the command you told me to. There is no change im unable to boot in flash recovery also now xD.
i also went to the service centre they said there is nothing they can do for this phone as the only thing they know is to flash the stock firmware.
mrawal031 said:
@ankur.walia @ravibhat
i tried the command you told me to. There is no change im unable to boot in flash recovery also now xD.
i also went to the service centre they said there is nothing they can do for this phone as the only thing they know is to flash the stock firmware.
Click to expand...
Click to collapse
are u not able to go in fastboot mode now?
if u are, then ls try different versions of the recoveries...
and yes...what actually is happening? are u able to see the boot logo? its stuck in bootlogo screen?..or is it struck in recovery's logo screen?
are it is not even booting itself?
ankur.walia said:
are u not able to go in fastboot mode now?
if u are, then ls try different versions of the recoveries...
and yes...what actually is happening? are u able to see the boot logo? its stuck in bootlogo screen?..or is it struck in recovery's logo screen?
are it is not even booting itself?
Click to expand...
Click to collapse
I can go to the bootloader after entering stock recovery no combination of keys can display the option.
my phone starts normally shows logo and all booting animation but after that it gets stuck on a blank screen showing nothing and no touch response. I have tried aprox 4-5 variants of custom recoveries but i can flash none of them even after trying your command and getting success written on screen.
mrawal031 said:
I can go to the bootloader after entering stock recovery no combination of keys can display the option.
my phone starts normally shows logo and all booting animation but after that it gets stuck on a blank screen showing nothing and no touch response. I have tried aprox 4-5 variants of custom recoveries but i can flash none of them even after trying your command and getting success written on screen.
Click to expand...
Click to collapse
well if u got the successful execution of recovery flashing then it should go to recovery mode, try holding powe and volume down together for quite some time (5-6 seconds by the clock) and then release it
ankur.walia said:
well if u got the successful execution of recovery flashing then it should go to recovery mode, try holding powe and volume down together for quite some time (5-6 seconds by the clock) and then release it
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B6y6POATHFhrLVhpUThNVUc1VXc/view?usp=sharing
you can see the condition even after flashing the custom recovery i get booted into stock recovery

Unroot, back to stock and update issues.

I'm still on FRD-L09C432B101, haven't had the need to update yet everything just works great. I WAS rooted. Now with nougat around the corner I thought i would prepare my phone for that creamy deliciousness. Said and done i began working on it last night by unrooting through the superuser app (not my smartest move maybe but I couldn't adb and push stock recovery, I just kept getting an error) so I tried to flash recovery.img through twrp which allowed me to try the dload folder method. But everytime I boot into erecovery the phone wants to use wifi and download the update but fails. So now I'm stuck with no root and what seems like no stock recovery for some reason and to top it off unable to use adb.
I think I need some expert help here?
Hey,
Follow this, it should be ok :
- Turn of your phone
- Put the right update.app in the dload folder at the root of your SD CARD
- Plug your USB to your computer
- Press Volume Down and Power button, you will boot in bootloader mode
- Flash the original recovery with fastboot command
- Unplug your USB cable
- Reboot the phone with volume down, volume up and power button pressed
Your phone should update to original.
Androhyp said:
Hey,
Follow this, it should be ok :
- Turn of your phone
- Put the right update.app in the dload folder at the root of your SD CARD
- Plug your USB to your computer
- Press Volume Down and Power button, you will boot in bootloader mode
- Flash the original recovery with fastboot command
- Unplug your USB cable
- Reboot the phone with volume down, volume up and power button pressed
Your phone should update to original.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is what i get, so im kinda stuck
Is your bootloader unlock ? You can check it in bootloader mode.
Just in case,, have you tried to lauch CMD in administrator ?
Androhyp said:
Is your bootloader unlock ? You can check it in bootloader mode.
Just in case,, have you tried to lauch CMD in administrator ?
Click to expand...
Click to collapse
yes it's unlocked. and ive tried launching it as admin
edit it says phone unlocked frp locked
it seems that i've got it working, a couple of reboots, driverupdate/repais/reinstall what ever that was. i got it force updated through the dload method. i thought it would wipe my phone but it didn't . now it's updating to 131 (if i recall right)
Androhyp said:
Hey,
Follow this, it should be ok :
- Turn of your phone
- Put the right update.app in the dload folder at the root of your SD CARD
- Plug your USB to your computer
- Press Volume Down and Power button, you will boot in bootloader mode
- Flash the original recovery with fastboot command
- Unplug your USB cable
- Reboot the phone with volume down, volume up and power button pressed
Your phone should update to original.
Click to expand...
Click to collapse
Hampa_D said:
it seems that i've got it working, a couple of reboots, driverupdate/repais/reinstall what ever that was. i got it force updated through the dload method. i thought it would wipe my phone but it didn't . now it's updating to 131 (if i recall right)
Click to expand...
Click to collapse
This phone does not need stock recovery for dload flash to work
all you need to do is the lines I put in Blue above for it to succeed
clsA said:
This phone does not need stock recovery for dload flash to work
all you need to do is the lines I put in Blue above for it to succeed
Click to expand...
Click to collapse
That's what I thought and I've tried. Buy I finally got it working.
Thanks for your help
clsA said:
This phone does not need stock recovery for dload flash to work
all you need to do is the lines I put in Blue above for it to succeed
Click to expand...
Click to collapse
how to get the right update?
izxudin said:
how to get the right update?
Click to expand...
Click to collapse
The FRD-L0xCxxx is your phone model
the B101 in this example is the software version, you need the one that matches your model
and has a higher number than yours for example the next update from B101 is likely B201
search the forums for the firmware or use Huawei firmware finder
guys can someone help me? I should do a clean installation of the system through the "dload" procedure, I state that I'm now using l-09c432b401 (bootloader unlocked) passed a thousand times by various custom rom, flash several stock firmware but they gave me errors, I finally solved partially through the PC flashing boot / vendor.img partition .. here is the phone, but missing various functions .. the point is that I can not install the firmware via the original recovery because it hangs at 5% ... all tried the firmware ... Thanks

HELP!!! Recovery and system wont boot

I just received my Pixel (not XL and not verizon version) that I bought from the Google Store and I tried loading TWRP on it. Fastboot works and I can fastboot into a TWRP recovery, however, whenever I try to flash another recovery with that recovery, the the message warning me to lock the bootloader pops up, then the phone very briefly goes to white screen with the google logo and instantly shuts off. Then it automatically repeats that process.. Am not sure what I did wrong (for example if I accidentally flashed the wrong variant to begin with?) but I also don't know how to fix it. I have tried all of the TWRP variants and nothing has worked. I also think the I was on 7.1.2.
I spent all night searching through all of the threads and could not find anyone who had a similar situation so any help is greatly appreciated and desperately needed.
Thank you in advance
SponsOne said:
I just received my Pixel (not XL and not verizon version) that I bought from the Google Store and I tried loading TWRP on it. Fastboot works and I can fastboot into a TWRP recovery, however, whenever I try to flash another recovery with that recovery, the the message warning me to lock the bootloader pops up, then the phone very briefly goes to white screen with the google logo and instantly shuts off. Then it automatically repeats that process.. Am not sure what I did wrong (for example if I accidentally flashed the wrong variant to begin with?) but I also don't know how to fix it. I have tried all of the TWRP variants and nothing has worked. I also think the I was on 7.1.2.
I spent all night searching through all of the threads and could not find anyone who had a similar situation so any help is greatly appreciated and desperately needed.
Thank you in advance
Click to expand...
Click to collapse
Try fastboot flashing 7.1.2 boot.img, then fastboot boot into TWRP, flash the attached twrp pixel installer, reboot to recovery from recovery , then flash supersu, then reboot. It will reboot a time or two if that is normal.
Tulsadiver said:
Try fastboot flashing 7.1.2 boot.img, then fastboot boot into TWRP, flash the attached twrp pixel installer, reboot to recovery from recovery , then flash supersu, then reboot. It will reboot a time or two if that is normal.
Click to expand...
Click to collapse
Thank you so much for your quick response.
Is this the version I use? I want to make sure I download the correct one: 7 .1.2 (N2G47O, May 2017)
SponsOne said:
Thank you so much for your quick response.
Is this the version I use? I want to make sure I download the correct one: 7 .1.2 (N2G47O, May 2017)
Click to expand...
Click to collapse
That should work though there should be June update.
p
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
Tulsadiver said:
That should work though there should be June update.
Click to expand...
Click to collapse
Thank you again for your help. I put the June version on instead of the previous and everything seems to be working. My only question is at the end of fastbooting the factory img, it said, "FAILED (remote: Partition table doesn't exist). Is that normal or something to be concerned about?
Here is a photo I took of it:
[/IMG]
SponsOne said:
[/IMG]
Click to expand...
Click to collapse
I don't know why the image doesn't seem to be uploading so here is a link to it:
https://drive.google.com/open?id=0B3fIceeoMIn8NC1XTUVTODNBT1k

(Im sorry) Cannot for the life of me get my phone up and running again.

I've tried like heck to find the answer before asking but to no avail. I'll keep it short:
- Phone will not boot, comes up to blue Honor boot screen, shuts off and immediately comes back on, off, on, off
- Can get to Fastboot (blurry image attached)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- device is locked, usb debugging is off (was attempting return to stock)
- CMD shows fastboot device but won't perform any flash or unlock commands (failed: remote command not allowed)
- have yet to get to recovery or erecovery
Is this trick in the button combos? I've tried them all repeatedly, is there a single instant I have to hit them/let them go?
Sorry for yet another help me thread, but I'm lost.
Which model do u have?
Depending on which model u have u can try using this guide:
https://forum.xda-developers.com/honor-8/how-to/restoring-relocking-bricked-frd-l04-t3666360
Sent from my Honor 8 using XDA Labs
ayush rao said:
Which model do u have?
Depending on which model u have u can try using this guide:
https://forum.xda-developers.com/honor-8/how-to/restoring-relocking-bricked-frd-l04-t3666360
Click to expand...
Click to collapse
Fr04. I'll give the guide a shot but I don't think I can flash anything via fastboot. I already said screw it and bought a moto so I'm in no hurry. Maybe this weekend. Thank you for the guidance .
Have tried the dload method? Flash full firmware via dload
The dload might work but idk if it will cus the phone is in a kernal panic it looks like. :crying:
---------- Post added at 06:52 AM ---------- Previous post was at 06:50 AM ----------
Did you have TWRP installed as your recovery?
I did but removed it while attempting to get back to stock.
dolorousbrann said:
I did but removed it while attempting to get back to stock.
Click to expand...
Click to collapse
You can reinstall
shashank1320 said:
You can reinstall
Click to expand...
Click to collapse
Given the description in my original post I don't know how to do that, sorry.
dolorousbrann said:
Given the description in my original post I don't know how to do that, sorry.
Click to expand...
Click to collapse
Download the full firmware for your model.
Extract the zip. Copy the contents (with update.app) to dload folder on sd card.
Power off the phone( it is already off i think)
Press vol up+ vol down+power key
It should start flashing the stock firmware
shashank1320 said:
Download the full firmware for your model.
Extract the zip. Copy the contents (with update.app) to dload folder on sd card.
Power off the phone( it is already off i think)
Press vol up+ vol down+power key
It should start flashing the stock firmware
Click to expand...
Click to collapse
Is done that a few times at never had it work. Either one got the wrong firmware (though it came straight from the Honor site) or in doing wondering wrong. I'll give it another go this weekend and try it back. Thanks
dolorousbrann said:
Is done that a few times at never had it work. Either one got the wrong firmware (though it came straight from the Honor site) or in doing wondering wrong. I'll give it another go this weekend and try it back. Thanks
Click to expand...
Click to collapse
Good luck. Hope for the best
Not that anyone is still here but the dload method will not work. The phone won't leave the boot loop and go into recovery. Tried every button combo and timing I could to no avail. I have given up.
You should be able to remotely factory reset it through Google Find My Device
Try DC Unlocker I had this issue and it worked
Rommco05 said:
Which is your problem. You can boot to fastboot and PC recognize your phone?
Click to expand...
Click to collapse
I can boot into fastboot and it says "relocked". At Command Prompt "fastboot devices" shows the phone but any command (flash, update, oem unlock) all give me an error of "remote command not allowed".
Rommco05 said:
Try reinstall HiSuite and again connect phone to pC
Click to expand...
Click to collapse
HiSuite doesn't recognize that a device is connected.
Rommco05 said:
Try reinstall HiSuite, this will reinstall the drivers
Click to expand...
Click to collapse
Ok, ill try it tomorrow. Thank you.

Going back to stock rom.

Hello
I used RROS but the phone is heating up to 48 degree
I used to Lineages OS but the camera really bad
I used Carbon ROM. Not liked it.
I want to back stock rom again. But how?
Rommco05 said:
Which model?
Click to expand...
Click to collapse
bklal20
I did it. now using stock rom. thanks.
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
ozergul said:
bklal20
I did it. now using stock rom. thanks.
Click to expand...
Click to collapse
yashrathi9 said:
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
Click to expand...
Click to collapse
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
ozergul said:
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
Click to expand...
Click to collapse
its bricked now :/
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yashrathi9 said:
its bricked now :/
Click to expand...
Click to collapse
Bootloop? Flash kernel also and repeat these steps
Arrandale said:
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
Click to expand...
Click to collapse
Ramdisk and recovery_ramdisk
ozergul said:
Bootloop? Flash kernel also and repeat these steps
Click to expand...
Click to collapse
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
ozergul said:
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
Click to expand...
Click to collapse
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
yashrathi9 said:
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
Click to expand...
Click to collapse
What's the phone model you have?
Did you flash correct files i hope.
ozergul said:
What's the phone model you have?
Did you flash correct files i hope.
Click to expand...
Click to collapse
i have bkl-l09 c675 but no files were available for c675 so i tried flashing the global version ie bkl-l09 c432.
yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
FreebleMined_FR said:
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
Click to expand...
Click to collapse
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
yashrathi9 said:
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
Click to expand...
Click to collapse
Try to use this method
https://forum.xda-developers.com/8-lite/how-to/guide-unbrick-huawei-p8-lite-2017-honor-t3766652
If your router does not allow you to do that, use DC-Phoenix or Funkyhuawei, but it's a last resort
I think you did something wrong. I used this method 2 times.

Categories

Resources