hi
1. i accidentally installed recovery img on boot img using flashify.
2. phone got softbricked and usb debugging was not enabled even android developement was not on.
3. i tried doing fastboot but it is not being detected on pc(win 10 64 bit).
HELP ME PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THANKS IN ADVANCE
[email protected] said:
hi
1. i accidentally installed recovery img on boot img using flashify.
2. phone got softbricked and usb debugging was not enabled even android developement was not on.
3. i tried doing fastboot but it is not being detected on pc(win 10 64 bit).
HELP ME PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THANKS IN ADVANCE
Click to expand...
Click to collapse
Try this but remember you will loose all your data.
Related
hi everyone,
i accidentally deleted all of my data from my sd card when i got stuck in a bootloop and now my moto g has no OS installed. I've tried using adb to push the stock ROM onto it but because I cant access usb debugging through TWRP it doesn't even recognise my device is plugged in. any advice would be help full thanks.
NexusHaggis said:
hi everyone,
i accidentally deleted all of my data from my sd card when i got stuck in a bootloop and now my moto g has no OS installed. I've tried using adb to push the stock ROM onto it but because I cant access usb debugging through TWRP it doesn't even recognise my device is plugged in. any advice would be help full thanks.
Click to expand...
Click to collapse
Hmmm.. You basically have 2 options here.
1. Get ADB working (it's not hard, try the Koush's Universal ADB driver)
2. Restore back to stock ROM, but you will need Fastboot working.
The thing is, if you can get Fastboot working, ADB should work too.. so...
If you need help with ADB, just ask..
Maybe this will help you http://forum.xda-developers.com/showthread.php?t=2542219
guide me pls
same problem with me guide me step by step pls
i m fresher for all this stuff
neozen21 said:
Hmmm.. You basically have 2 options here.
1. Get ADB working (it's not hard, try the Koush's Universal ADB driver)
2. Restore back to stock ROM, but you will need Fastboot working.
The thing is, if you can get Fastboot working, ADB should work too.. so...
If you need help with ADB, just ask..
Click to expand...
Click to collapse
Ok so ive got the universal drivers, now what?
Same problem here...
Please help us
Check the link that Eduzerokm posted
Sent from my XT1032 using xda app-developers app
More info on your status quo please..
1) Got ADB up and running on your PC?
No: Use search option, there's plenty of guides in this forum..
Yes:
2) Make sure you flash the latest recovery image. Here's the link to the link:
http://forum.xda-developers.com/showthread.php?t=2608377
Place the recovery image in the same folder with your adb and fastboot
Connect your phone to your computer
Boot into bootloader by holding power + volume down
Open command prompt and type:
fastboot flash recovery PUTNAMEOFRECOVERYHERE.img <press enter>
3) From here just follow this link:
http://forum.xda-developers.com/showthread.php?t=1667929
(It's for HTC phone, but applies to moto g, too. Tested by myself)
4) Enjoy!
After flashing miui in moto g5s plus it is showing no os installed are u sure to reboot?
plz help me?
Hey guys,
big problem happened today.was copying some files from pc suddenly phone hanged, i switched off the mobile afterwards is stops at moto boot image.
i m having teamwin recovery n its also stuck at teamwin image,
not i cant use it from pc because mobile is not authorized for adb.
boot-loader menu accessible,phone was unlocked,rooted,stock rom(xt1033) with xposed.
any help will be appreciated.
thanx
akshatsourav said:
Hey guys,
big problem happened today.was copying some files from pc suddenly phone hanged, i switched off the mobile afterwards is stops at moto boot image.
i m having teamwin recovery n its also stuck at teamwin image,
not i cant use it from pc because mobile is not authorized for adb.
boot-loader menu accessible,phone was unlocked,rooted,stock rom(xt1033) with xposed.
any help will be appreciated.
thanx
Click to expand...
Click to collapse
Use fastboot. ADB does not work in bootloader mode...
skyguy126 said:
Use fastboot. ADB does not work in bootloader mode...
Click to expand...
Click to collapse
yes i m in fastboot mode,then again its not recognized by pc.
On windows go into device manager and force install the drivers there
skyguy126 said:
On windows go into device manager and force install the drivers there
Click to expand...
Click to collapse
thanx for the reply,
jus one question,as adb will not work as mobile is not authorised with pc,fastboot commands will work as usual.right?
I believe so, correct me if I am wrong.
skyguy126 said:
I believe so, correct me if I am wrong.
Click to expand...
Click to collapse
you are correct
fixed it,thanx again man..actually i never needed to use fastboot command except unlocking device..
just needed a factory reset from fastboot.
glad to help
Hi
Was my mistake,,,,,my opo was in good running condition and I use RR latest6.0.1 M
Today flash in Turga TWRP 3.0.3.1 reolacing official TWRP 3.0.2.0
Flash turga using fastboot .......and wrong command entered to boot
recovery.img. adb stuck and I pulled out the unit without cancelling the
link inside win 10.
Try to flash another twrp version....found out no communication between
my opo and win 10.
Tried many many procedure to rectify this .......no success.
Is fastboot coding kaput?
How to rectify this.............help me please.
RedBux said:
Hi
Was my mistake,,,,,my opo was in good running condition and I use RR latest6.0.1 M
Today flash in Turga TWRP 3.0.3.1 reolacing official TWRP 3.0.2.0
Flash turga using fastboot .......and wrong command entered to boot
recovery.img. adb stuck and I pulled out the unit without cancelling the
link inside win 10.
Try to flash another twrp version....found out no communication between
my opo and win 10.
Tried many many procedure to rectify this .......no success.
Is fastboot coding kaput?
How to rectify this.............help me please.
Click to expand...
Click to collapse
You're computer isn't recognizing your device? Is recovery working? Have you booted into recovery and tried the PC connection from there?
1.....Yes
2.....Yes
3.......NO
You mean ADB side load or Mount to computer? IF
that you meant NO I did not try yet.
fixed
striped down win 10
force in adb driver into device manager
HI Develoopers, please can anyone help me to solve my Tecno spark 4.
it doesn't boot and i tried to re-install new rom but i can't access the usb debugging since the phone won't boot.
how can i enable usb debugging in factory reset/recovery mode?
If a TWRP for this phone exists then you can try to boot into this TWRP - what is done by means of Fastboot - and from within TWRP you can enable USB-debugging because TWRP has an ADB interface and support.
jwoegerbauer said:
If a TWRP for this phone exists then you can try to boot into this TWRP - what is done by means of Fastboot - and from within TWRP you can enable USB-debugging because TWRP has an ADB interface and support.
Click to expand...
Click to collapse
no twrp
FramFako1 said:
no twrp
Click to expand...
Click to collapse
There are no TWRP just the default
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).
Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.
How do I get this phone into download mode? Cannot seem to get it to flash
I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro
Can SPFT be used with Linux?
jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?
Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.