Database Info

FoxOS Mlais M9 (kitkat rom)

This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/07/lightweight-lollifox-rom-for-mt6592.html
LolliFox:
Mlais M9: Kitkat firmware: https://drive.google.com/file/d/0B04SC-zsoiayVnVrMlFUZ3dTeEE/view?usp=sharing
Fast kitkat rom.

This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/12/pussyfap-v4-beast-edition-for-mtk.html
Mlais M9: pussyfab v4: https://drive.google.com/file/d/0B-Ceu9-5gYk0ZWh2RzBOSmZSS1k/view?usp=sharing
Fast, tiny kitkat android 4.4.2 rom.
Edit: non plus users must do a factory reset after flashing the rom.
ps. another pussyfab:https://drive.google.com/folderview?id=0B-Ceu9-5gYk0RnVfMGgzYWRaSXc&usp=sharing

The original pre loader modded rom kitkat 4.4.2 is also very rapid (i installed z-ram precated from google store) and it has no bugs, so try it: https://drive.google.com/file/d/0B04SC-zsoiayRW9pS0tpQjFrOGM/view?usp=sharing

CM11 for Mlais M9
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/09/cyanogenmod-11-for-mt6592-and-mt6592m.html
CM11 for Mlais M9: https://drive.google.com/file/d/0B04SC-zsoiayX25weWFjUVNWeDg/view?usp=sharing

This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/12/asus-zenfone-2-ui-for-mt6592.html
Asus Zenphone rom for Mlais M9: https://drive.google.com/file/d/0B04SC-zsoiayakdLTE5nb3VsZE0/view?usp=sharing
edit: disable swiping. Really fast boottime. 300 circa MB RAM memory in use, so 600 MB RAM free idle.

mark-1978 said:
This rom has been powered by http://mtkroms.com, the original rom can be found at http://www.mtkroms.com/2015/07/lightweight-lollifox-rom-for-mt6592.html
LolliFox:
Mlais M9: Kitkat firmware: https://drive.google.com/file/d/0B04SC-zsoiayVnVrMlFUZ3dTeEE/view?usp=sharing
Fast kitkat rom.
Click to expand...
Click to collapse
between the:
LolliFox
pussyfab v4
the original pre loader modded rom kitkat 4.4.2
what's the best/fast rom?
Can I install it straight in the mlais m9 plus ?
thanks

Trinotet said:
between the:
LolliFox
pussyfab v4
the original pre loader modded rom kitkat 4.4.2
what's the best/fast rom?
Can I install it straight in the mlais m9 plus ?
thanks
Click to expand...
Click to collapse
have the idea, pussyfab v4 is the fastest. Yes with Philz touch recovery you can just wipe everything and install it.

MiuiPro 5.5.12.10 for Mlais M9
Working version for the Mlais M9 from this month (december 2015):
Download: https://drive.google.com/folderview?id=0B-Ceu9-5gYk0YXZfa2ZYRkZHN2s&usp=sharing
Working version.

Marshmallow themed rom for Mlais M9
Based on kitkat rom: https://drive.google.com/folderview?id=0B-Ceu9-5gYk0dk4xaUN3dmNYT0E&usp=sharing

Ukrainian firmware Mlais M9 Normal speed
Lite version (not real fast) and minimal version (rather fast) Download: https://drive.google.com/folderview?id=0B04SC-zsoiayY05rNjd4aDRXSXM&usp=sharing

China semi s5
Kitkat rom, nice and fast(s5): https://drive.google.com/folderview?id=0B-Ceu9-5gYk0bXJiWkRSMEFVVDQ&usp=sharing
kitkat s6 is not that fast, also not that neet. Further i was busy with a cm12.1 rom, but that is a hard nut to crack. I wonder if even on the port device the rom works.

HTC rom for Mlais M9 (long boottime): https://drive.google.com/folderview?id=0B-Ceu9-5gYk0UHYxVDdkaF9XN0k&usp=sharing

Porting to Mlais M9
when porting and found there errors, just copy over the port rom.

S4 semi china very good reception
ported from mt6582: https://drive.google.com/open?id=0B-Ceu9-5gYk0bXJiWkRSMEFVVDQ

Mlais Mystic os v7: https://drive.google.com/folderview?id=0B04SC-zsoiaybVktakxheXFaR1U&usp=sharing

mark-1978 said:
Mlais Mystic os v7: https://drive.google.com/folderview?id=0B04SC-zsoiaybVktakxheXFaR1U&usp=sharing
Click to expand...
Click to collapse
On the mlais m9 plus:
the front camera dont work.
Rear camera work with the 13mpx.
Sms send and received work.
3g work
Can't make calls only receive.
After can't make call i have not tested any more. maybe more bugs...

works fine on mlais m9 standard version.

mark-1978 said:
will fix the microphone bug.
Click to expand...
Click to collapse
The micro works, the bug its not make calls, i press to make the call but never gives the connecting... if i receive a call i can accept the call and can talk and ear the other person.

Another kitkat version. Nice background further some build.prop tweaks. There is a phone error, but after one ignore it doesn't show up again.

Cleanrom, another kitkat rom. Need gapps 4.4.2 to make use of appstore. Fast rom!
Cleanrom with better cameraresolution.

[ROM][5.1.1][A6000] ***Pure NexusOs 9.8.3 ***

Presenting Pure NexusOs 9.8.3 For Lenovo A6000/Plus Builded By Mr.Chan/Herman Koeman with Few Modifications By Me.
This is a pure builded rom with Nexus features and latest Tweaks and Modified to give user extreme Battery Life while Maintaining High Performance
Features:---
-Nexus features
-Nexus Ui
-Best performance and stability
-Good Battery Life
-Kernel Tweaks
-Lollipop features
-Status bar tweaks
-Themes supported
-Excellent camera quality
-Beautiful and Modified UI
-Lockscreen tweaks
-Recent panels
Note:-- I am not responsible if yo brick your device or anything happened during flashing
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first,
Install TWRP Recovery JavTwrp from here https://drive.google.com/file/d/0B15QzivpF7lec2RtYTk4cHNUaUk/view
Download NX ROM from here https://drive.google.com/file/d/0ByjAgTuxsUayM0FkUC03NVZjX3c/view
NX Google Services (Gapps) here http://sh.st/nopkn
Patch for fixing camera here https://drive.google.com/file/d/0ByjAgTuxsUayNmxHTVR0dW1uc1k/view
-Bugs ::----
None,you tell me if exists
Installing NX on Lenovo A6000:
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes)
Contributors
Deelie,Flourmo,Mr.Chan and Stuepd
XDAevDB Information
Nexus Os for Lenovo A6000/plus K30-T
ROM OS Version: 9.8.3
ROM Kernel: 3.10.x
Version Information
Status: Stable
Current Stable Version: 9.8.3
Created 2016-02-03
Last Updated 2016-02-03

Is this rom 32 bit or 64 bit??

klvenkatt said:
Is this rom 32 bit or 64 bit??
Click to expand...
Click to collapse
32 bit

How used external storage as primary storage plzzzz
Lollipop all external by default

I was wondering how is the battery back up of this ROM? Headphones working OK? and lags?

Sourav_8434 said:
Presenting Pure NexusOs 9.8.3 For Lenovo A6000/Plus Builded By Mr.Chan/Herman Koeman with Few Modifications By Me.
This is a pure builded rom with Nexus features and latest Tweaks and Modified to give user extreme Battery Life while Maintaining High Performance
Features:---
-Nexus features
Nexus experience ROM is known for its stability and smoothness. Same is the case here.
Marvellous ROM ,SUPER STABLE.
-Nexus Ui
-Best performance and stability
-Good Battery Life
-Kernel Tweaks
-Lollipop features
-Status bar tweaks
-Themes supported
-Excellent camera quality
-Beautiful and Modified UI
-Lockscreen tweaks
-Recent panels
Note:-- I am not responsible if yo brick your device or anything happened during flashing
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first,
Install TWRP Recovery JavTwrp from here https://drive.google.com/file/d/0B15QzivpF7lec2RtYTk4cHNUaUk/view
Download NX ROM from here https://drive.google.com/file/d/0ByjAgTuxsUayM0FkUC03NVZjX3c/view
NX Google Services (Gapps) here http://sh.st/nopkn
Patch for fixing camera here https://drive.google.com/file/d/0ByjAgTuxsUayNmxHTVR0dW1uc1k/view
-Bugs ::----
None,you tell me if exists
Installing NX on Lenovo A6000:
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes)
Contributors
Deelie,Flourmo,Mr.Chan and Stuepd
XDAevDB Information
Nexus Os for Lenovo A6000/plus K30-T
ROM OS Version: 9.8.3
ROM Kernel: 3.10.x
Version Information
Status: Stable
Current Stable Version: 9.8.3
Created 2016-02-03
Last Updated 2016-02-03
Click to expand...
Click to collapse
Nexus experience ROM is known for its stability and smoothness. Same is the case here.
Marvellous ROM ,SUPER STABLE.

Battery bug
Every thing is ok but I trace one bug
Automatically battery low and device off
My device Lenovo A6000

download links broken .....

This rom is very smooth
Please make nexus rom based on marshmallow!

Downloading...
under trying.

Please. Why it's necessary to be on stock Lollipop, when prior the flashing we have to perform also a system wipe?

bugs?? gapps link??
Hi
I ve flashed this ROM and is very neat fast and everything working fine.
Too early to say if its a bug, but did have this 2 problems:
1. Could not download gapps from your link so downloaded directly from gapps site for arm, 5.1, 32 bit, full stock version, but unable to flash the same, it says I do not have enough memory, but I have more than 10 Gb free! Anyways flashed nano version and all went fine!
2. Once I noticed the phone went off, while disconnecting from charger, I switched off and reset the device, and so far no issues. Will update asap.
Otherwise very smooth no issues and the camera included, I feel is the best of all ROM's. Thanks, really liked it.
And a very noob question, (I am very new to this custom ROM's concept), When switching on for the first time, saw a screen saying looking for available updates, so my query is whether ROM will also revieve updates (ota)??
Thanks in advance for your effort, time and replies.
Venkat.

klvenkatt said:
Hi
I ve flashed this ROM and is very neat fast and everything working fine.
Too early to say if its a bug, but did have this 2 problems:
1. Could not download gapps from your link so downloaded directly from gapps site for arm, 5.1, 32 bit, full stock version, but unable to flash the same, it says I do not have enough memory, but I have more than 10 Gb free! Anyways flashed nano version and all went fine!
2. Once I noticed the phone went off, while disconnecting from charger, I switched off and reset the device, and so far no issues. Will update asap.
Otherwise very smooth no issues and the camera included, I feel is the best of all ROM's. Thanks, really liked it.
And a very noob question, (I am very new to this custom ROM's concept), When switching on for the first time, saw a screen saying looking for available updates, so my query is whether ROM will also revieve updates (ota)??
Thanks in advance for your effort, time and replies.
Venkat.
Click to expand...
Click to collapse
Hi friend, I've just installed the Rom and I got the 2nd bug, and now I'm reinstalling with my previous Gapp.
---------- Post added at 05:42 PM ---------- Previous post was at 05:17 PM ----------
when I disconnect charger, phone turns off... only the 1st time
but now it's solved with mine Gapps.
camera is excellent really, but just its max resolution is 5 MP, I hope you find a solution for this to obtain also 8MP.

klvenkatt said:
Hi
I ve flashed this ROM and is very neat fast and everything working fine.
Too early to say if its a bug, but did have this 2 problems:
1. Could not download gapps from your link so downloaded directly from gapps site for arm, 5.1, 32 bit, full stock version, but unable to flash the same, it says I do not have enough memory, but I have more than 10 Gb free! Anyways flashed nano version and all went fine!
2. Once I noticed the phone went off, while disconnecting from charger, I switched off and reset the device, and so far no issues. Will update asap.
Otherwise very smooth no issues and the camera included, I feel is the best of all ROM's. Thanks, really liked it.
And a very noob question, (I am very new to this custom ROM's concept), When switching on for the first time, saw a screen saying looking for available updates, so my query is whether ROM will also revieve updates (ota)??
Thanks in advance for your effort, time and replies.
Venkat.
Click to expand...
Click to collapse
Thanks for report

Battery bug
This ROM is working grate only problem is battery automatically increases battery percentage and automatically decreases pls fix this bug

ROM is smooth but ....
battery goes down randomly and phone shutdowns
can't use the ROM more than 15 mins

Battery issue
Please fixx Battery Issue wit my lenovo A6000 Plus its geting shut down when even my phones battery is on 89%........

DOOGEE Y6 - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- Latest Official: http://www.doogee.cc/bbs/viewtopic.php?f=10&t=25
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20161028: http://www.needrom.com/wp-content/uploads/2016/12/Doogee-Y6-30.rar
- Here: http://www.needrom.com/download/doogee-y6/
​
​Stock (Android 7.0 - Beta)
Official Nougat (04/25/2017): https://www.needrom.com/download/doogee-y6-7-0-2/
Don't flash the preloader and lk & lk2 from this rom! It will lock your bootloader (that's a new and pointless thing).
Instead, use the fix from this post.
Previous release (01/21/2017): https://www.needrom.com/download/doogee-y6-7-0/
Flash with "Firmware upgrade" option. Make NVRAM backup first!
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.0.2: https://forum.xda-developers.com/showpost.php?p=69800037&postcount=3​- TWRP 3.1.1: https://www.needrom.com/download/twrp-3-1-1-for-y6/​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​
Custom ROMs
Disclaimer (custom roms' specific)
This section is intended for advanced users. You have to know how to flash a custom rom and how to go back to stock rom whenever you feel the need to do so.
ROMs in this section are not 100% bugless. Expect things not to work properly as they would on stock.
Nobody is responsible for anything that happens to your phone if you use any of the custom roms below!
Android 7.x ROMs:
1. AOSP 7.1: https://forum.xda-developers.com/android/development/rom-aos-7-1-doogee-y6-t3695534
Developer: Nonta72
Bugs:
Potential weak signal on 4G/LTE networks.
2. Nokia 3 ROM: https://forum.xda-developers.com/android/development/rom-nokia-rom-doogee-y6-t3691410
Developer: Nonta72
Bugs:
None.
3. Android One ROM: https://forum.xda-developers.com/android/development/rom-android-one-rom-doogee-y6-t3687182
Developer: Nonta72
Bugs:
None.
4. Xperia™ ROM: https://forum.xda-developers.com/android/development/rom-xperiarom-doogee-y6-t3698430
Developer: Nonta72
Bugs:
Front camera is dark at night in video recorder mode..
5. XOS V2.2 ROM: https://forum.xda-developers.com/android/development/rom-xos-v2-2-doogee-y6-t3700109
Developer: Nonta72
Bugs:
Flashlight toggle in status bar and heavy touch vibration..
6. LineageOS 14.1: http://www.nontastik.com/lineageos-14-1-doogee-y6-stable/
Developer: Nonta72
Bugs:
YouTube 720p and higher at 60 FPS lags.
Video Recorder in stock camera app doesn’t work (use Footej app from Play Store as a workaround)
Front camera is dark in stock Camera app. Use Google Camera or another camera app to fix it
Wi-Fi doesn’t connect to known networks after a reboot.
7. Stock 7.0 modded: https://cloud.mail.ru/public/Ef1y/gFo9r1oWm
Developer: vladykodi
Bugs:
I haven't tested that ROM. You have to flash it find out!
Android 6.x ROMs:
1. MIUI 9 (7.8.28): http://www.nontastik.com/miui-9-doogee-y6-mt6750/
Developer: Nonta72
Bugs:
Youtube 60FPS videos aren't smooth
VPN
2. Resurrection Remix 5.7.3: http://www.nontastik.com/resurrection-remix-5-7-3-doogee-y6-beta/
Developer: Nonta72
Bugs:
FM Radio
Bluetooth Audio (A2DP)
3. XOS V2.0 (Infinix OS): http://www.nontastik.com/xos-v2-0-rom-doogee-y6/
Developer: Nonta72
Bugs:
Haven't spotted one during my tests
4. Pixel: https://cloud.mail.ru/public/2G5d/uwoycgLym
Developer: vladykodi
Bugs:
Flash it and find out! I haven't tested it.
7. FlymeOS 5: http://www.nontastik.com/flymeos-5-doogee-y6-android-6-0/
Developer: Nonta72
Bugs:
I didn't find a major bug during my tests
8. Aerom V5 (best rom for gaming!): http://www.nontastik.com/aerom-v5-aosp-doogee-y6/
Developer: Nonta72
Note: This ROM has great performance! Antutu score goes up to 40,000 compared to stock (about 36,000).
Bugs:
I found none during my tests.
9. Huawei EMUI 4.1 (beautiful ROM): http://www.nontastik.com/emui-4-1-marshmallow-doogee-y6-mt6750/
Developer: Nonta72
Bugs:
Serious battery drain issue!
10. CyanogenMod 13: https://mega.nz/#!kR9yWJaD!No3c86ZHN9QZdr8L9ga5UPjWN6ZmUn_r1AiGqtz6hT4
Developer: Nonta72
Bugs:
Camera HDR
Bluetooth Audio (A2DP)
XDA:DevDB Information
DOOGEE Y6 - Development & Support, ROM for the Android General
Contributors
Alberto96, Nonta72
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-09-27
Last Updated 2018-01-09

Here is Stock Rom Bro, 6.0 MT6750-Stock Rom Doogee y6

TWRP 3.0.3 for Doogee Y6
TWRP 3.0.3 for Doogee Y6
Based on Android 6.0 firmware ver. DOOGEE-Y6-Android6.0-20161028
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system

I have bought this phone and the look is great. but I feel the tough not super responsive and fingerprint just does a decent job. I wanted to know whether it supports Volte? and if yes how do I turn it on. bcoz if I open the phone information it has the option - " turn off Volte provisioned flag". or do i have to install a new rom ?

ravikiran1252 said:
I have bought this phone and the look is great. but I feel the tough not super responsive and fingerprint just does a decent job. I wanted to know whether it supports Volte? and if yes how do I turn it on. bcoz if I open the phone information it has the option - " turn off Volte provisioned flag". or do i have to install a new rom ?
Click to expand...
Click to collapse
Do you still have the phone?
I have few roms (cm13, Resurrection Remix, EMUI, Nubia, Aerom etc.)
Mine is busted for the time being.

CynogenMod 13 (yup, still CM, we can't get Leanage OS yet)
I have ported CyanogenMod 13.0 from P9000.
It's usable but two major bugs probably need to be fixed:
Camera HDR mode
Bluetooth (it can't seem to connect to some BT devices like BT Headsets)
Download link: cm13_Y6.zip (MEGA)
I was not able to fix these bugs as my doogee y6 touchscreen is no longer working after I have wrongly flashed a kernel to it. I am trying to revive it but I'm not sure it will ever be recovered, so maybe someone else can try to fix the remaining bugs.
I also would like to ask Y6 owners to share a file called gt1x_debug which I believe can help me recover my touchscreen. You can get it using cat proc/gt1x_debug from either adb or Terminal Emulator app.
Credits to @Deepflex and @Jonny for their work on the P9000.

Nonta72 said:
I have ported CyanogenMod 13.0 from P9000.
It's usable but two major bugs probably need to be fixed:
Camera HDR mode
Bluetooth (it can't seem to connect to some BT devices like BT Headsets)
Download link: cm13_Y6.zip (MEGA)
I was not able to fix these bugs as my doogee y6 touchscreen is no longer working after I have wrongly flashed a kernel to it. I am trying to revive it but I'm not sure it will ever be recovered, so maybe someone else can try to fix the remaining bugs.
I also would like to ask Y6 owners to share a file called gt1x_debug which I believe can help me recover my touchscreen. You can get it using cat proc/gt1x_debug from either adb or Terminal Emulator app.
Credits to @Deepflex and @Jonny for their work on the P9000.
Click to expand...
Click to collapse
Nice job on the port!
As for gt1x_debug, here's a direct copy-paste from my terminal to Pastebin.
Just in case there's any form of binary data that's needed, here's the file itself (created by # cp /proc/gt1x_debug /sdcard/gt1x_debug).

DepressedHedgehog said:
Nice job on the port!
As for gt1x_debug, here's a direct copy-paste from my terminal to Pastebin.
Just in case there's any form of binary data that's needed, here's the file itself (created by # cp /proc/gt1x_debug /sdcard/gt1x_debug).
Click to expand...
Click to collapse
Thank you for the file!
I hope I can recover it.

Problem
Nonta72 said:
I have ported CyanogenMod 13.0 from P9000.
It's usable but two major bugs probably need to be fixed:
Camera HDR mode
Bluetooth (it can't seem to connect to some BT devices like BT Headsets)
Download link: cm13_Y6.zip (MEGA)
I was not able to fix these bugs as my doogee y6 touchscreen is no longer working after I have wrongly flashed a kernel to it. I am trying to revive it but I'm not sure it will ever be recovered, so maybe someone else can try to fix the remaining bugs.
I also would like to ask Y6 owners to share a file called gt1x_debug which I believe can help me recover my touchscreen. You can get it using cat proc/gt1x_debug from either adb or Terminal Emulator app.
Credits to @Deepflex and @Jonny for their work on the P9000.
Click to expand...
Click to collapse
I tested the rom, Lags & battery drain.

EMUI 4.1 Marshmallow
A new rom!
Try it yourself and see how it goes.
More info on needrom here http://www.needrom.com/download/emui-4-1-marshmallow/
Note: It should work on Y6 Black Piano version aswell. :good:

Nonta72 said:
A new rom!
Try it yourself and see how it goes.
More info on needrom here http://www.needrom.com/download/emui-4-1-marshmallow/
Note: It should work on Y6 Black Piano version aswell. :good:
Click to expand...
Click to collapse
When you fix the battery drain?

ZNetDark said:
When you fix the battery drain?
Click to expand...
Click to collapse
Probably not gonna be fixed ...

Nonta72, your port of CM 13.0 works great for me, it only lags for a few seconds on boot-up (which is pretty much expected).
The only issues I seem to have noticed is the HDR functionality not working and the battery being recognized as 3,000 mAh instead of 3,200 mAh, which may be causing the battery drain issues other people seem to be experiencing. Other than those few problems though, the port works great!

@Nonta72 Here is the file from my phone as well: https://hastebin.com/raw/vapunecofa

DepressedHedgehog said:
Nonta72, your port of CM 13.0 works great for me, it only lags for a few seconds on boot-up (which is pretty much expected).
The only issues I seem to have noticed is the HDR functionality not working and the battery being recognized as 3,000 mAh instead of 3,200 mAh, which may be causing the battery drain issues other people seem to be experiencing. Other than those few problems though, the port works great!
Click to expand...
Click to collapse
I had succeeded to make an improved version before the phone got screwed.
I will upload it soon. And how did you know that the battery is recognized as 3200 mAh ?
My phone used to drain battery even in my stock rom. And the battery drivers are mostly inside the kernel I believe.
I hope Nougat update will fix the battery drain with a new kernel. I heard they will update the Piano Black version. So maybe the normal version too.
Zokoro said:
@Nonta72 Here is the file from my phone as well: https://hastebin.com/raw/vapunecofa
Click to expand...
Click to collapse
Hi,
You seemed to have pulled the configs while the screen was off. That's probably why the second raw of data are 0x00 (which means EMPTY). Try to pull it with screen turned on and phone unlocked. Thanks.

Ah, my bad. https://hastebin.com/fifuhisomu Here you go!

Aerom V5 for DOOGEE Y6
Hi,
This is Aerom V5 ported from Elephone P9000.
It is a pure AOSP ROM.
It is fast ! Up to 40,000 Antutu score!
No bloatwares
No bulsh!t
No virus
Just stock Android.
Bugs:
You tell me (I did not have the chance to test it deeply)
Downloads:
Aerom-V5_Y6.zip (Mega.nz - 834.4 MB)
Install with TWRP
Screenshots click here!
Credits:
Deeplex
Jonny

Nonta72 said:
Hi,
This is Aerom V5 ported from Elephone P9000.
It is a pure AOSP ROM.
It is fast ! Up to 40,000 Antutu score!
No bloatwares
No bulsh!t
No virus
Just stock Android.
Bugs:
You tell me (I did not have the chance to test it deeply)
Downloads:
Install with TWRP
Screenshots
Credits:
Deeplex
Jonny
Click to expand...
Click to collapse
Hi - would this work with the Y6 piano black (DOOGEE Y6 Piano Black 5.5 Inch Fingerprint 4GB RAM 64GB ROM MTK6750 Octa Core 4G Smartphone - from Banggood) ?
I bought it a couple of weeks ago and I need to restart it twice daily as the screen becomes unresponsive.
Should I flash the stock rom first? Does it come already with the stock rom from Banggood, or has it been bloated on the way from the factory?
Thanks for any help.
MR

mcr1974 said:
Hi - would this work with the Y6 piano black (DOOGEE Y6 Piano Black 5.5 Inch Fingerprint 4GB RAM 64GB ROM MTK6750 Octa Core 4G Smartphone - from Banggood) ?
I bought it a couple of weeks ago and I need to restart it twice daily as the screen becomes unresponsive.
Should I flash the stock rom first? Does it come already with the stock rom from Banggood, or has it been bloated on the way from the factory?
Thanks for any help.
MR
Click to expand...
Click to collapse
Yes, it should normally work on Y6 Piano Black because it has the same kernel as the Y6 normal version. But I suggest you port the kernel first. If you can't do that, upload the boot.img from your stock rom. I'll do it for you and you'll test.

Android 7.0 (apparently)
Hi,
While posting my last ROM (FlymeOS 5) for the Y6 on needrom, I stumbled upon this ROM.
Apparently it is Android 7.0 for the Y6.
I'm not sure whether it works or not. But I assume it works as it is Official.
I haven't tested it,
I don't have the Y6 anymore,
I don't know what works and what doesn't,
I don't know if it works on Y6 Piano Black too.
But I'm sure it doesn't work on Y6 Max/Max 3D.
Link: Android 7.0 for Y6
Thanks to [email protected] at needrom.
@Alberto96 Can you please update the INDEX with the recent roms? Thanks!

Leagoo M8 Nougat ROM - Touchwiz S8

Touchwiz flavour to Leagoo M8
ROM Features:
Touchwiz System UI(Grace UX)
Touchwiz Camera
Touchwiz Keyboard
Touchwiz Messages
Touchwiz Dialer
Touchwiz Contacs
Touchwiz Gallery
Touchwiz Notes
Touchwiz Font
Touchwiz Icons
Always on Display
Edge Screen
S Note
S Health
Build Prop Tweaks:
Better RAM Management
Optimized Battery
System Enhancement
Bugs:
FM (not tested)
Camera - not rendering right colors
Fingerprint scanner - not working
Prerequisites:
Custom recovery preferably TWRP
Installation Instructions::cyclops:
1.Reboot to recovery.
2.Wipe Data/Factory, Cache, Dalvic-cache
3.Locate the rom zip file and install.
4.Wait for it to install (be patient, takes few mins to install) and reboot.
5.Voila .. you have touchwiz
Download:cyclops::cyclops:
https://mega.nz/#!kjRADQgL!6eO9riK69o24GFGZGEcWb8SofcAmIKw56e-kPkEJQJ0
XDA:DevDB Information
Leagoo M8 Touchwiz, ROM for all devices (see above for details)
Contributors
sulaimanz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom recovery
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2017-05-30
Last Updated 2017-05-30

is this rom for leagoo m8 of M8 pro

Wow sounds really good!

How were you able to port this? Would like to see if it can be ported to Redmi Note 3

Gothisus said:
is this rom for leagoo m8 of M8 pro
Click to expand...
Click to collapse
For Leagoo M8

A_Random_Guy said:
How were you able to port this? Would like to see if it can be ported to Redmi Note 3
Click to expand...
Click to collapse
Took an S8 Rom made for firefly aurii and re-ported to Leagoo M8 using porting tools .
Took the rom from this link http://baabebiboobu.blogspot.co.uk/2017/04/samsung-galaxy-s8-firefly-mobile-aurii.html
Hope this helps for your porting

OTG working?
Is OTG working? And how to solve the camera not rendering good color?

Very nice one, runs a lot faster than CM. Almost no bloatware, clean and bright interface. Thanks!
*Apart from the known bugs, the sound seemes a little bit too low, especially while calling.

Root?
How to root it?
---------- Post added at 01:15 AM ---------- Previous post was at 01:05 AM ----------
LaThea said:
Very nice one, runs a lot faster than CM. Almost no bloatware, clean and bright interface. Thanks!
*Apart from the known bugs, the sound seemes a little bit too low, especially while calling.
Click to expand...
Click to collapse
Have you root it? And is OTG working?

Supreme Dimeji said:
Have you root it? And is OTG working?
Click to expand...
Click to collapse
Yes, I'm using it. OTG doesn't seem to work, at least for me.

Still waiting for stable version.

Leagoo M8 Screen problem
Hi,
i have problem with leagoo m8 screen, it was working fine, but after updating few apps facing its screen issue, some time touch works fine, but some time touch get disable.... i have also restore it and install custom rom by Sp_flash... but still problem exist, any one who can help pls

nice rom..but only camera not working well

Hi every one, i have try it, and all install corect, i can beleave that my phone is so faster, i will post more about it...
1st camera not work like 13 mpixel, is bad, same on the frond camera, is bad,
2nd wen i go to settings-sound- and press to aply a ringtone, is not ope, i have to go from musik and chose the ringtone like default,
3rd in file manager i cant pick and delete the files i dont wana keep,
4rth didnt show my contacts from sim card
can u fix this bad things on the rom?
can i root it with this rom? how and with what guide?

I'm not going to download this rom, I expect a more stable and buggy. If they could fix the bugs I was very grateful.

any version for leagoo m8 pro tnx

Gothisus said:
is this rom for leagoo m8 of M8 pro
Click to expand...
Click to collapse
I think it is for M8 only not for M8 Pro ?

[ROM][LEAK] AOSP 4.3 for Nokia X2-Jupollar

AOSP FOR NOKIA X2-JUPOLLAR
this ROM can't run on Ara. I tried flash rom: RM-1013 retail,RM-1014 1GB,512MB,RM-1015 1GB but it cant boot.
I tested it on RM-xxx 1 SIM,512MB pre B1,a back button. Rm-1013 2 SIM,512 MB
Everything work fine on 2 device. Different is RM-xxx just have a back button,no distance sensor, no proximity sensor. I need enable navibar to can use home,recent button and it dont auto turn of screen when make a call
This ROM is backup from RM-1013 2 SIM,512MB with rooted
For RM-xxx pre B1. I was modified system to can use on it
How to install:
Flash Philz CWM Recovery
Flash ROM
Flash Root or Gapp if you want
reboot
Link download: post 2
Picture: post 3
DONT TRY FLASH ON ARA, IT DONT BOOT. IT JUST FOR JUPOLLAR WITH OLD HARDWARE
kernel source : https://github.com/cm-nokia-x2/android_kernel_nokia_msm8610/tree/RM-1013-2.0.0.11
XDA:DevDB Information
[ROM][LEAK] AOSP 4.3 for Nokia X2-Jupollar, ROM for the Nokia X2
Contributors
thinhx2
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: F1.1 and down
Based On: Aosp
Version Information
Status: Stable
Created 2018-11-23
Last Updated 2018-11-23

Link AOSP 4.3 ROM
Philz recovery: https://forum.xda-developers.com/nokia-x2/general/cwm-nokia-x2-t2850273
ROM: https://mega.nz/#!eAkgkaxJ
full backup file: https://mega.nz/#!6NVVnCiI

Picture
RM-xxx pre B1 build with RM-1015
AOSP 4.3 with CM-11 4.4

What not working:
RM-1013 2 SIM,512MB:
sim 2 slot not work
RM-xxx 1SIM, 512MB preB1:
no distance,no proximity sensor, dont turn of screen when make call
this proto only have a back button on touch screen panel,need enable navi bar
no glance,no doubletap

ROM preB1 12/2013 Nokia v1351: just public, dont try flash, cant boot on ara,buggy, unstable,missing so much driver:
ROM: https://mega.nz/#!HJcnjCKA
full backup: https://mega.nz/#!WMcVkIDa

ROM F1.1 2/2014 Nokia v1406: stable than v1351, no lock screen, no home button. roration,glance,doubletap work fine
ROM: https://mega.nz/#!GIFnFaxL
restore via Philz Rec

hello,today i ported FW1421 to X2 preB1

Big info: i ported 2.1.013 and it full working on preB1
no home button,no distance sensor,no proximity sensor,no front camera because hardware dont have it. system working fine

Can't download ROM
thinhx2 said:
ROM F1.1 2/2014 Nokia v1406: stable than v1351, no lock screen, no home button. roration,glance,doubletap work fine
ROM]
restore via Philz Rec
Click to expand...
Click to collapse
Good day, I saw your ROM and link to download it, but you put description key. So, how I can get ROM? It's paid or something? Thank you

Dethmon said:
Good day, I saw your ROM and link to download it, but you put description key. So, how I can get ROM? It's paid or something? Thank you
Click to expand...
Click to collapse
It free but not for x2 retail- Ara. Just for x2 early prototype - jupollar. I tried port bootloader of x2 prototype to x2 retail but i doesnt boot