Friends , My opo is getting booted directly to recoverymode. fastboot is not working. i used OPO recovery tool as wel as twrp cm11 and cm12 flash. stil i am getting only twrp recovery mode only.
I tried this command in Terminal
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
am getting this error
I get this error
dd: writing '/dev/block/platform/msm_sdcc.1/by-name/fota': No space left on device
please help me.
prasiforu28 said:
Friends , My opo is getting booted directly to recoverymode. fastboot is not working. i used OPO recovery tool as wel as twrp cm11 and cm12 flash. stil i am getting only twrp recovery mode only.
I tried this command in Terminal
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
am getting this error
I get this error
dd: writing '/dev/block/platform/msm_sdcc.1/by-name/fota': No space left on device
please help me.
Click to expand...
Click to collapse
1. what did you do to end there?
2. what happens if you try to flash cm12?
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
1. what did you do to end there?
2. what happens if you try to flash cm12?
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
my phone drenched in rain10 days back . i kept in rice bag for 3 days and after that its getting rebooted to TWRP recovery. i tried flashin CWM as wel as Stock recovery. only once it booted into OS and i used it for sometime and i switched it off and kept in rice bag again. the next day i tried to power on the mobile and again TWRP recovery loop has started. Pls help me bro. even though i flashed cm12 am facing similar issue. pls help
can you do anything in twrp or nothing at all?
This sounds as if your volume buttons might be damaged.
You know, there is the shortcut volume down + power to boot straight to recovery.
Your device is most definitely pressing volume down on itself which results in booting to recovery...
When you connect it to a PC while in Recovery, do you have access to your internal storage?
Have you tried unrooting it?
Related
Hi guys,
A little help would be appreciated here as I think i've bricked my SNS just now..
I was following this guide here: http://forum.xda-developers.com/showthread.php?t=878446 in an attempt to flash clockworkmod to then flash something else however:
I get to step 14 after booting into recovery and a whole bunch of e:/ errors are shown, mainly around the Cache when in the cwm recovery screen.
I attempted to flash the stock ROM as per this thread: http://forum.xda-developers.com/showthread.php?t=1063664 (Android 2.3.6/GRK39F/XXKF1 Radio/KA3 Bootloader)
However this error'd and went back to the cwm screen with the e:/ errors.
The phone will now not boot past the Google logo with the unlocked padlock on the screen.
Any ideas atall? I've tried factory wipe/cache/devlik wipe ect but the errors are still showing?
Thanks in advanced!
i had experienced same problem " E:/ errors"
try use newer or older version of recovery , that's how i solved it ...
can you still be able to enter fastboot ? if so , you can flash new recovery img via adb
if you can't ,that's gonna be kinda problem , i suggest you try Odin ...although it could be little more complicated then recovery
qtwrk said:
i had experienced same problem " E:/ errors"
try use newer or older version of recovery , that's how i solved it ...
can you still be able to enter fastboot ? if so , you can flash new recovery img via adb
if you can't ,that's gonna be kinda problem , i suggest you try Odin ...although it could be little more complicated then recovery
Click to expand...
Click to collapse
Thanks for replying.. How do I get into Fastboot if it doesn't boot though? + what command do I use to get there from a Mac?
I've used odin before so am aware of how it works, but wouldn't know which files to flash if you know what I mean?
Edit: Im using cwm 3.0.0 by the way, not sure if that helps?
adaimespechip said:
Thanks for replying.. How do I get into Fastboot if it doesn't boot though? + what command do I use to get there from a Mac?
I've used odin before so am aware of how it works, but wouldn't know which files to flash if you know what I mean?
Edit: Im using cwm 3.0.0 by the way, not sure if that helps?
Click to expand...
Click to collapse
To enter fastboot when phone is off just hold the volume up button and the power button at the same time
Sent from my Google Nexus S using xda premium
smok3thekid said:
To enter fastboot when phone is off just hold the volume up button and the power button at the same time
Sent from my Google Nexus S using xda premium
Click to expand...
Click to collapse
Oh! Yes sorry, I can do that indeed..
I had switched off my phone for some days and switched it on today. the phone wont boot, gets stuck at htc logo. I CAN go into bootloader but when i try to get into recovery, i get a blank screen. please help
Sandesh7 said:
I had switched off my phone for some days and switched it on today. the phone wont boot, gets stuck at htc logo. I CAN go into bootloader but when i try to get into recovery, i get a blank screen. please help
Click to expand...
Click to collapse
same problem here
Fellas try flashing another recovery. Or download again this one that you currently have and flash this again
Which recovery?? Twrp 2.5??
ғг๏๓ ҭђє ғเรђ™
no cwm.
tried flashing both twrp and cwm. still giving me a blank screen when i try to boot into recovery
ok im going to try to go back to ruu and flash recovery again. can some1 give me the link to the thread containing all the ruu?
No need to flash the RUU.. Just reflash the recovery using
Code:
fastboot flash recovery recovery.img
yeah, when i tried that and it says fastboot is not recognized as internal or external command. :\
Sandesh7 said:
yeah, when i tried that and it says fastboot is not recognized as internal or external command. :\
Click to expand...
Click to collapse
That means fastboot is not installed... Or is not recognized..
Go to the original android development section, and download fastboot for windows from the twrp recovery thread..
And also download twrp 2.5.0.0 from the same thread(bith links are in the 1st post)..
Extract both zips in a folder, then from cmd prompt, navigate to that folder, and from there, run
Code:
fastboot devices
fastboot flash recovery recovery.img
If you have the android sdk installed, run an update, to get the newest version of fastboot(not needed) and then run the "fastboot flash.." command..
ғг๏๓ ҭђє ғเรђ™
oh I really appreciate the response will try this and report by tomorrow.
yeah did what you said. but it gets stuck at the teamwin logo
nothing seems to work. please help!
Sandesh7 said:
nothing seems to work. please help!
Click to expand...
Click to collapse
Try again if it doesnt work ... Sometimes after a freshly flashing the recovery it gets stuck at teamwin splashscreen.. then just remove battery and by using the power and vol button combo boot into bootloader and then into recovery. If its still getting stuck at teamwin logo.. try redownloading the recovery.img.. this time from the thread..and flash it again.. if it still doesnt work .. then go to the Rooting tutorial by jaggyjags and flash the A310e recovery using the bat file.. That must do the trick.
when i reflashed and tried to go into recovery, first it goes to splashscreen then suddenly goes blank and then comes back to splashscreen and gets stuck there. when i tried the jaggyjags recovery it goes blank. how could have something gone so wrong just coz i switched off my phone for a few days? i was running cm9 build 14 and yannou cwm5. now nothing seems to work. any other suggestions?
Sandesh7 said:
when i reflashed and tried to go into recovery, first it goes to splashscreen then suddenly goes blank and then comes back to splashscreen and gets stuck there. when i tried the jaggyjags recovery it goes blank. how could have something gone so wrong just coz i switched off my phone for a few days? i was running cm9 build 14 and yannou cwm5. now nothing seems to work. any other suggestions?
Click to expand...
Click to collapse
Try removing SD card and booting into recovery. If it enters into recovery fully , electrocute your SDcard by putting it back in,while inside recovery ,then do what you have to.
If all doesn't work ,could be a burnt recovery ..You May try this.. not sure about exact code.
Code:
fastboot boot recovery /sdcard/recovery.img
You need twrp 2 5 recovery.img in /SDcard
Complete cute prince recovery procedure and try booting your Rom. You will not be able Flash any other recovery if you've actually burnt it. Only way is by the above code.. If your Rom boots,read twrp thread fully.
Sent from my HTC Explorer A310e using xda app-developers app
Yeah thanks guys. It got fixed after I tried flashing recovery in jaggyjags tutorial n then flashing twrp
Sent from my HTC Explorer A310e using xda premium
Hi ... I just rooted my moto g 3rd gen 8GB . It seems all are working fine.
I installed TWRP recovery from here
and Superuser from here
Root is done. But when I am trying to boot into recovery I am getting "no command" message with a black screen background and android laying down ! Can anyone please help me to fix it? Thank you,
deb123sxq12s said:
Hi ... I just rooted my moto g 3rd gen 8GB . It seems all are working fine.
I installed TWRP recovery from here
and Superuser from here
Root is done. But when I am trying to boot into recovery I am getting "no command" message with a black screen background and android laying down ! Can anyone please help me to fix it? Thank you,
Click to expand...
Click to collapse
press and hold power button + volume up button for 3 to 5 seconds after entering into recovery it will take you to menu
Hold power button and press Vol "UP"
help help help
originaldexter said:
Click to expand...
Click to collapse
bro tried the same ..but it boots m up to stock recovery
unkushad said:
bro tried the same ..but it boots m up to stock recovery
Click to expand...
Click to collapse
Can you post photo of that error ?
You probably did the same mistake as me, you might have entered the following code: "fastboot boot twrp-osprey-2.8.7-test1.img" which does not install TWRP, only boots yourself into it.
Use the following command to install it: "fastboot flash recovery twrp-osprey-2.8.7-test1.img" and it will replace your stock recovery.
Had the same issue. What I had to do is right after flashing twrp, go directly to recovery (don't reboot phone or go to OS)Weird but that's what I had to do and it goes twrp every time. And yes, I did 'fastboot flash recovery'
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
It's been two days since i have been trying and now it's driving me crazy. I am on stock marshmallow with unlocked bootloader and root. I was trying something (irrelevant here) , and now the phone won't boot into recovery.
No green light when the phone turns on to press the volume buttons to boot into recovery.
Tried adb commands but they just reboot the device. Tried flashing ftf files but still the recovery won't come up.
Tried each and every recovery image out there but still no luck.
The recovery flashes with success but adb returns error "no devices/emulators found"
Btw I'm installing twrp recovery. If anyone knows a solution to this problem, please help
Ikhlaq737373 said:
It's been two days since i have been trying and now it's driving me crazy. I am on stock marshmallow with unlocked bootloader and root. I was trying something (irrelevant here) , and now the phone won't boot into recovery.
Click to expand...
Click to collapse
Could be relevant, you never know.
Ikhlaq737373 said:
No green light when the phone turns on to press the volume buttons to boot into recovery.
Tried adb commands but they just reboot the device. Tried flashing ftf files but still the recovery won't come up.
Tried each and every recovery image out there but still no luck.
The recovery flashes with success but adb returns error "no devices/emulators found"
Btw I'm installing twrp recovery. If anyone knows a solution to this problem, please help
Click to expand...
Click to collapse
How did you manage to "successfully" flash a recovery if adb doesn't even find the device. Usually when I flashed a TWRP I just booted into fastboot and did a quick fastboot flash. Never had any issues with that whatsoever. Maybe try that.
Here's the full story. I first unlocked the bootloader and flashed twrp, rooted and everything went fine. After a couple of months i decided to install lineage os , so i booted into recovery and wiped data, system etc. But i forgot to copy the lineage os zip , so i switched off the device(despite the error message "no os installed"), removed memory card and put files on it and inserted the card back. After this procedure, the phone stopped booting into recovery. Ever since then i am able to flash stock ftf files and everything but the device won't enter recovery so I'm unable to root it again. I hope this will help you understand the situation
Somebody please help
Ikhlaq737373 said:
Somebody please help
Click to expand...
Click to collapse
Try an alternative route.
Fully flash a stock ftf .291. Everything will be up to date then and you'll have the latest bootloader.
Then try two things.
First try fastboot flashing the latest TWRP from Nailyk.
Then boot to recovery holding power and volume keys as you boot and it will boot directly to recovery.
You could also try fully flashing an ftf.
Then use adb to fastboot flash a custom stock based kernel like advanced kernel which includes TWRP 3.0.2.
Use that to boot to recovery the old way and voila you have recovery.
Dobsgw said:
Try an alternative route.
Fully flash a stock ftf .291. Everything will be up to date then and you'll have the latest bootloader.
Then try two things.
First try fastboot flashing the latest TWRP from Nailyk.
Then boot to recovery holding power and volume keys as you boot and it will boot directly to recovery.
You could also try fully flashing an ftf.
Then use adb to fastboot flash a custom stock based kernel like advanced kernel which includes TWRP 3.0.2.
Use that to boot to recovery the old way and voila you have recovery.
Click to expand...
Click to collapse
Are you talking about the .291 ftf obtained from xperifirm ? Does that include the bootloader ?
I'll try the second solution(advanced kernel), thanks.
Ikhlaq737373 said:
Are you talking about the .291 ftf obtained from xperifirm ? Does that include the bootloader ?
I'll try the second solution(advanced kernel), thanks.
Click to expand...
Click to collapse
Yeah that's the one. At the least it will set your phone back to factory settings and you can just start all he root tutorials from the beginning.
Option 2 should work for you.
You should definitely make sure your adb on your PC is working and make sure fastvoot is as well. Just to be sure its not the PC side of things.
I realize this is a bit of a necro-post but I thought it might help someone.
At some point TWRP on the Z3 Compact switched from Volume Up+Power to enter recovery to Volume Down+Recovery.
I spent about an hour trying to get into TWRP because every bit of documentation I read said you have to "power on and then press volume up several times" to get into recovery.
However that is NOT the case.
To get into TWRP after it's been flashed you have to hold Volume Down and Power at the same time, then release Power once the screen lights up.
Dobsgw said:
Yeah that's the one. At the least it will set your phone back to factory settings and you can just start all he root tutorials from the beginning.
Option 2 should work for you.
You should definitely make sure your adb on your PC is working and make sure fastvoot is as well. Just to be sure its not the PC side of things.
Click to expand...
Click to collapse
Thanks dear . It (advanced kernel) worked like a charm
I spent about an hour trying to get into TWRP because every bit of documentation I read said you have to "power on and then press volume up several times" to get into recovery.
However that is NOT the case.
To get into TWRP after it's been flashed you have to hold Volume Down and Power at the same time, then release Power once the screen lights up.
Click to expand...
Click to collapse
this little titbit just saved me. been hours on this!!
Can't get into Recovery and Custom ROM Android
C:\adb>fastboot flash recovery TWRP-Z3-recovery-Android10-2019-10-11-TESTING.img
sending 'recovery' (13310 KB)...
OKAY [ 0.687s]
writing 'recovery'...
OKAY [ 0.906s]
finished. total time: 1.594s
fastboot reboot-bootloader
However, I no longer get into recovery and the Android system, but I still get into Fastboot mode.
Now I thought I flashed the recovery again but I can't boot in there .....
majikfox said:
I realize this is a bit of a necro-post but I thought it might help someone.
At some point TWRP on the Z3 Compact switched from Volume Up+Power to enter recovery to Volume Down+Recovery.
I spent about an hour trying to get into TWRP because every bit of documentation I read said you have to "power on and then press volume up several times" to get into recovery.
However that is NOT the case.
To get into TWRP after it's been flashed you have to hold Volume Down and Power at the same time, then release Power once the screen lights up.
Click to expand...
Click to collapse
I signed in just to say thanks! And yes, people still use the Z3 lol