Hi
i am going to share my one problem in sprout4 device.
my device is karbonn sparkle v with android 6.01.
In stock rom (whatever the android version), i feel slow download speed in WiFi Connection from google paly store.
But in custom rom with the same WiFi, the download speed is normal
in stock rom, it took more than 3 minutes just to download 2MB apk file. but in custom rom i will download in 45 seconds
help
I have never experienced this problem I also have Karbonn Sparkle V Android 6.0.1 and Wi-Fi speed of 1 MB/s Megabyte (Not Megabit)it never slow down the connection.
Related
Hi, i got a prestigio multipad 5080 pro, i rooted my device and everything was fine until i changed the DPI of my device in order to play dead space. Now my device keeps says "unfortunately, launcher has stopped" on a loop is there any way to fix this? i have tried factory reset and it did nothing.
Thanks.
a good rom and stable so far.
download from here
http: // x--t-e-a-m. blogspot. it/ and click on Download:
XTeam 4.1 QUI
plus for setting your external sd as a nand *as a main installing card... use this http :// crewrktablets. arctablet. com/?wpfb_dl=330
use google translate cause its italian website...anyway ...
steps are easy ... unrar XTeam 4.1 ...
1) Turn off your device
2) Locate the folder Rockusb_driver in the XTeam 4.1 folder and install the drivers for your computer.
3) on the tablet Hold sounds Down Button and connect the device.
4) open with right click and run as administrator the rk29update.exe
5) press the button "formatta!!!"
6) tick the "Loader"
7) Download this kernel from here: http: // www .2shared. com/file/GmdSyNG1/kernel_for_pmp_5080cpro_with_o.html
 replace the kernel with the one that i gave you from the link
9) press the "Aggiorna! ! " button and wait until the program overwrite the new firmware
10)when the tablet reboot it will go through cwm and the install the
Oma CM10 ExtSD To NAND OTG Fix.
11) the new firmware have OTA updater so update your tablet until you have no other updates...(i realised that i had to download the updates from ota and install them manual but anyway...)
12) in one point the updates from ota updater will change your kernel but dont worry.you will just lose temporary the screen rotation so...
install all the updates and in the end run the rk29update.exe again untick all the things there and keep only the kernel ticked and use the kernel i gave you.that match with your 5080 cpro. this time dont push formatta !!!.
Just overwrite the kernel and click aggiorna! !
your device will restart and ta da !!! you have the latest firmware for your Prestigio 5080 C PRO. overclocked and rooted with 1 giga for apps
plus 2x faster than factory's firmware.
i wanna say a big thanx to OMA for the kernel http: //crewrktablets. arctablet. com/
a big thanx to X TEAM for this awesome firmware
and a huge thanx to my self that i had the patience to search for the specific model what to do. It took me about 2 days to gather all the informations i needed.
And a huge apologize to oma that i didnt use his JB version for the prestigio tablet but i test it and it was kinda slow and laggy for my tablet xD
ps: in case that u need more info i ll be around to help you
Remember the steps are only for Prestigio PMP 5080 C PRO and NOT for the Prestigio 5080B.
For the Prestigio 5080B you must find the specific Kernel that works on the device cause else you will have problem with the ROTATION
Sent from my Xteam Smartpad 810c using Tapatalk HD
i have been using android for 3-4 months now.... and i have some basic knowledge about rooting , changing roms and etc...
but yesterday i thought of updating my cwm from 6.0.1.2 to 6.0.2.8 (http://forum.xda-developers.com/showthread.php?t=2204785)
well the point is i tried to partition my sd card (i dont know what went through my mind ) and i made a 2048 mb partition with 32 mb swap
and after reboot it got stuck on android is upgrading window so i flashed the custom rom again (which i was using(lewa 13.03.08)) and every thing was fine except my sd card.... my 8 gb sd card is now a 5.44 gb sd card... so plz help me recover my sd space back plz.... :crying:
Wipe partition in cwm,or in rom manager...:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
Thanx I got it figured out in an other way but I really appreciate your help..
Problem with MM A110
GOT A Problem On My Micromax A110 android phone.
1.) Model Number : Micromax A110
2.) Firmware Version : 4.04
3.) Baseband Version : MAUI.11AMD.W12.22.SP.V5.P2, 2012/09/19 15.39
4.) Kernel Version: 3.0.13
5.) Build Number : ALPS.ECS2.MP.V1
The service provider is Vodafone India, Unlocked and I am using GPRS/EDGE service from Vodafone India.
Problem:
Two weeks back i was downloading one attached file from email attachment while I was travelling through an area where the signal strength was poor.
The downloading preparation started, but actual downloading did not. It just went on, and I found that there is no link for this downloading which is shown in the notification area and the Gmail application which started the downloading.
I was searching in the "downloads" in the menu and found that this downloading is not registered,
Since then, I am seeing the downloading notification and it is just continuing.
Can any body explain me what is this? Is it a bug of ICS? Any way to remove this ?
Thanks in advance.
realman0102 said:
GOT A Problem On My Micromax A110 android phone.
1.) Model Number : Micromax A110
2.) Firmware Version : 4.04
3.) Baseband Version : MAUI.11AMD.W12.22.SP.V5.P2, 2012/09/19 15.39
4.) Kernel Version: 3.0.13
5.) Build Number : ALPS.ECS2.MP.V1
The service provider is Vodafone India, Unlocked and I am using GPRS/EDGE service from Vodafone India.
Problem:
Two weeks back i was downloading one attached file from email attachment while I was travelling through an area where the signal strength was poor.
The downloading preparation started, but actual downloading did not. It just went on, and I found that there is no link for this downloading which is shown in the notification area and the Gmail application which started the downloading.
I was searching in the "downloads" in the menu and found that this downloading is not registered,
Since then, I am seeing the downloading notification and it is just continuing.
Can any body explain me what is this? Is it a bug of ICS? Any way to remove this ?
Thanks in advance.
Click to expand...
Click to collapse
Go to settings - apps then g to download manager force stop it and clear data. It will remove that notification. Its just a stucked download.
Sent from my Micromax A110 using xda app-developers app
Well ,i create that new tread because of that specific device HUAWEI U8951-0100.
Unlucky other that device they left it to die(...) EXCEPT DEVELOPERS around the world.
Please i don't want donate , exept if you find somthing really helpfull.
As i know there is mainly SEVERAL types of that model:
U8951-010,U8951-0100, AND U8951-0200 e.t.c
I THING ONLY U8951-0100 HAVE NO firmware U P G R A T E S
Can some one knows WHY?
Any way for all those that have this version you can install "eng" versions of that link http://www.mediafire.com/?00nn01girip80
.I tested works good. I am absolutely sure that ROMS is nicer AND FASTER rather than
VODAFONE ones.
Before of that you must already have unlocked boot loader (HUAWEI) official and a recovery openrecovery-twrp-2.6.0.0-u8951.img
The LEWA team works very effectively as you will see. Thanks LEWA team
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.BE AWERE
INSTRUCTIONS
1 save zip rom file on sdcard.
2 turn off phone
3.push volume up and power for at list 10 sec
4 on recovery state select wipe data
5 select wipe cache
6 select install
7 select your rom zip
8 re-wipe
9 reboot
enjoy
Also gapps from here :http://forum.xda-developers.com/showthread.php?t=2240652
If you have lite time you can uninstall (useless) apk by using link2sd or titaniumbackup.Both can uninstall system applications easily .
NEW UPDATE ---->LEWA 23.8.13
http://www.4shared.com/zip/i0n04rnL/LeWa_HUAWEI_C8813D_JB_ROM_1308.html
ADDITIONALL
---------8/18/13 WIFI MALFUNCTION---------->SOLVED
---------23.8.13 2X SPEED WIFI TWEAKS[/COLOR
---------09.9.13 NEW G510 UPDATE https://docs.google.com/file/d/0B7aiJXKXWaVRbUlQVllNZTJGQUU/edit?usp=sharing
HUAWEI G510 17.9.13 UPDATE LINK====>https://docs.google.com/file/d/0B7aiJXKXWaVRT1gwQk1uNFVWcTg/edit?
usp=sharing
(for some details look the post)
HUAWEI G510-0100 28/10/2013 NEW LEWA UPDATE OS v.5 link:https://drive.google.com/file/d/0B7aiJXKXWaVRZU84RmVvRlVfZUk/edit?usp=sharing
(for more info below )
So is this just a official eng rom for the G510-0100 or is it a custom rom? how do i install it ? from dload folder o sd or can i use CWM?
If it is a stock rom will or is there any custom rom or is there going to be a Cyanogen port for the G510-0100?
Is a custom ROM.I installed via twrp version 2.5 or ,2.6( first post).
There is weekly updates for that ROM (china web) but I must do some modifications to Google installer for compatibility.
I will upload only critical rom updates(slow upload limited).
-THERE IS NO OFFICIAL UPDATE FOR THAT SPECIFIC MODEL...AND PROBABLY WILL NOT....FOR UNKNOWN REASONS...
Sent from my HUAWEI C8813d using xda app-developers app
---------8/18/13 WIFI MALFUNCTION----------
It appears wifi malfunction on that rom but not only .ALL new hardware (MORE-LESS) with a new wifi chip are no full compatible with JB 4.1.2 (.Even stock Vodafone...B171)
I resolve it in my device and now testing... .If some one want it just let me know. maybe i could make a patch.
Sent from my HUAWEI C8813d using xda app-developers app[/QUOTE]
Huawei g510-0100 wifi fx
gyankamp1 said:
---------8/18/13 WIFI MALFUNCTION----------
It appears wifi malfunction on that rom but not only .ALL new hardware (MORE-LESS) with a new wifi chip are no full compatible with JB 4.1.2 (.Even stock Vodafone...B171)
I resolve it in my device and now testing... .If some one want it just let me know. maybe i could make a patch.
As a say wifi fix is ready:
But there is no time for flashable zips(…).Be patient.
Instractions:
DOWNLOAD FIX ARCHIVE http://www.4shared.com/rar/AF266kS1/G510-0100_wifi_FIX.html
(ALL ARCHIVES TESTED FOR VIRUS AND OTHER MALICIOUS AND IS SAFE) A V A S T
You need a good file explorer (I use rootexplorer)
Aprox 10 minutes of time.
-extract zip to sdcard
-TURN OFF WIFI
-open root explorer go to /data/misc/
AND DELETE WIFI FOLDER
1 . FROM EXTRACTED FOLDER
COPY /LIB folder copy /paste all (4) files to -- /system/lib/ (and replace existing)
THEN GIVE THEM (4) , PERMISSION RW-R-R each (FROM EXPLORER SELECT PERMISSIONS)
2 .GO TO SYSTEM FOLDER: /SYSTEM/WIFI/ ON YOUR SYSTEM PARTITION AND DELETE ALL FILES/FOLDERS
3 .GO AGAIN TO zip EXTRACTED FOLDER and COPY/PASTE ALL STUFF FROM /WIFI FOLDER To -- /SYSTEM/WIFI/
FINALLY GIVE TO ALL FILES RW-R-R PERMISSION ON /SYSTEM.WIFI/ AND FOR FOLDERS(2) RWXR-XR-X
example http://www.4shared.com/photo/k36F8xbg/folder_correction__1_.html
example http://www.4shared.com/photo/_ZOtzsET/file_correction__2_.html
REBOOT
NOW YOUR WIFI MUST BE PERFECT
(PLS press thanks button to know that works for you also or replay )
Sent from my HUAWEI C8813d using xda app-developers app
Click to expand...
Click to collapse
[/QUOTE]
2x wifi tweaks
[/QUOTE]
i already tested.It works.
I post this because it was surprise me. Wifi became double speed!!!
Instractions.
1.download this zip http://www.4shared.com/rar/4NugfNw4/2X_WIFI.html
2. unzip on your pc and move it to your sdcard.
3.from unzipped folder install PimpMyRom-alpha-3.3.1.apk
4.run it and go to tools / universal init.d support and just ACTVIVATE it. and then close program.
5.take second file 99SuperCharger and copy/paste on /system/etc/init.d folder (by rootexplorer)
6 reboot
If you use speed tester you can see the difference by numbers.http://forum.xda-developers.com/images/icons/advanced/clock.png
Also afterwords you can uninstall the PimpMyRom-alpha-3.3.1.apk.(depends on you)
enjoy
P.S ALL BENEFITS MUST GO TO V6SUPERCHARGING TEAM
23.8.13 update lewa huawei g510-0100
I try to post critical updates for LEWA roms.
Update 23.8.13
http://www.4shared.com/zip/i0n04rnL/LeWa_HUAWEI_C8813D_JB_ROM_1308.html
INSTRACTIONS TO FLASH :look first post
BUT DON'T WIPE ANYTHING IF YOU WISH TO KEEP YOUR DATA.
ALL tweaks MUST RE-INSTALL AGAIN.(i can do anything for that).
(the Chinese version you must know we can't install it in our device)
This is a Leawa ROm from a China boy.Is from 23/7/13 Lewa update for g510-010 but works also for g510-0100.
Has already wifi fix correction. http://shuajidown2.lexun.cn/down/NIKOLU/2013/08/29/LeWa_HUAWEI_G510-0010_13.08.23_4.1.zip
In my opinion those roms have a lot of applications mated for China.That STUFF makes rom HAVY.
Compatibility
You say: " how it is possible to be functional a g510-010 rom to g510-0100."
Well its not strange.Actually incompatibility exist on HUAWEI stock roms.
Now about custom rom it depends. Various custom rom can be compatible with ALL g510 (all versions).Frequently ,
boot.img causes problems (bootloops) or malfunction as (no network reception) because of wrong baseband.
All those problems can be solving but we must wait a lite bit.Now its very risky to change par-example radine wrong step
and mobile Hard/brick. Most important is unblocking FLASH DRIVE.Afterwords all it will be safer.
At list (but not last) a interesting OVERCLOCK.
HUAWEIG510-0100.Android4.1.Emotion_UI.V100R001XXXB171
HUAWEI G510-0100.Android4.1.Emotion_UI.V100R001XXXB171.
IMPORTANT SUGGESTION for all those using that firmware as is or as a base for a custom rom.
Compering with A G510-0100-V100R001XXXB170 version.
IT'S BETTER USE B170 BECAUSE:
-HAVE MORE STABLE MOBILe cell SIGNAL.
- STRONGER MOBILE cell SIGNAL
-HAVE MORE STABLE WIFI SIGNAL
-STRONGER WIFI SIGNAL AND FASTER DATA TRANSFER
ALL THOSE I CHECK IT TRIPLE
Well ,for that reasons i prefer use B170 firmware as base.
You?
HUAWEI G510-XXX LEWA UPDATE 6/9/13
-NO NEED ANY WIFI PATCH ANYMORE
-APK otimazation
--added NIGHT MODE
many more
UPDATE LINK: https://docs.google.com/file/d/0B7aiJXKXWaVRbUlQVllNZTJGQUU/edit?usp=sharing
HUAWEI G510-XXX LEWA UPDATE 17.9.13
update link: https://docs.google.com/file/d/0B7aiJXKXWaVRT1gwQk1uNFVWcTg/edit?usp=sharing
on that update; 1. impruve wifi replace wifi module and drivers
2. deleted some drivers that isn't necessary
3. delete some aplications
g510-0200 b189 backup
I made a back up of my factory stock rooted b189 g510-0200 rom with twrp . if anyone needs it i can send them a link to my dropbox. its a very nice rom but you cant download it from anywhere cause huawei only have the old rom b173 on there web site. . this is the latest rom with huawei notification toggles enabled. if you have twrp you can just copy my back up to your sd card then restore with twrp. :good:
sonyachin said:
I made a back up of my factory stock rooted b189 g510-0200 rom with twrp . if anyone needs it i can send them a link to my dropbox. its a very nice rom but you cant download it from anywhere cause huawei only have the old rom b173 on there web site. . this is the latest rom with huawei notification toggles enabled. if you have twrp you can just copy my back up to your sd card then restore with twrp. :good:
Click to expand...
Click to collapse
You can write the link (if you want).I thing it will be better for some one who wants give a try.
About f ir m w a r e u p d a t e
[...] All people that working on android devices spend all lot of time.I say that because a notice that there is some archive roms for g510-0100 (b196) etc.,THE IMPORTANT THING IN A F I R M W A R E U P D A T E is that upgrade or resolve critical low level routines(software- hardware configuration).
All the rest (system softawere) kernel e.t.c is match more easier to find solutions.
UNFORTUNATELY THE PROBLEM IS THAT WITH THOSE FLASH ROMS DOESN'T DO ANYTHING ON THAT DIRECTION.(this include ALL zip stuff (lewa).
There is a possibility to have (until December) a new JB 4.2.2 Official HUAWEI firmware up-grate.(WILL SEE).
Soon I will upload an lewa rom security update.
Sent from my HUAWEI C8813d using xda app-developers app
Lewa new OS version 5.
I prepared for G510.
I will upload at the end of October.
Soon...
Sent from my HUAWEI C8813d using xda app-developers app
28.10.2013 LEWA OS v5 FOR HUAWEI G510-0100
DOWNLOAD LINK======>https://drive.google.com/file/d/0B7aiJXKXWaVRZU84RmVvRlVfZUk/edit?usp=sharing
INSTRACTIONS:
-COPY PASTE ZIP TO SDCARD
-GO TO RECOVERY MODE
--FULL WIPE
-GO TO WIPE/ADVANCE AND WIPE DATA
-INSTALL ROM ZIP ARCHIVE
-wait 1 -2 minute
-reboot
ENJOY
[UNFORTUNATLY (BECAUSE OF MANY CHANGES) you must use titanium backup or an similar program to backup/restore you programs.
-additionally all my patches in first page must re-applyed EXEPT WIFI PATCH that i already applyed .
[/COLOR]
That Lewa upgrate to v.5 include many improvements-stabilities changes.
G510 problem - screen turns off in call
Hello dear friends,
My new G510 has a problem,
My screen turns off while receiving calls or calling someone,
and I can't turn it back on, not with the touch screen nor power/volume keys.
I tried to change to CM10.2 - but no dual sim support, so I went back to stock rom.
Please help.
Thank you
G510 problem - screen turns off in call
HUAWEI G510-0100 (Android 4.1.1)
Root (works with locked bootloader) – use the application to root then install superSU from Play store
http://www.cydiaimpactor.com/
Unlocking bootloader (be careful you could brick your device) http://www.huaweidevice.com/worldwide/servicePolicy.do?method=preUnlock
Or
https://www.dc-unlocker.com/huawei-ascend-y300-unlock
TWRP recovery
http://www.modaco.com/topic/362074-recoveryall-official-twrp-2631-root-21102013/
Other resources
http://www.modaco.com/forum/743-huawei-ascend-g510-development/
http://www.modaco.com/topic/365268-all-custom-roms-for-huawei-ascend-y300g510/
Update: Best Rom is Xolo Q1000s ROM : Go to last post
I've scored out most of this thread as I feel the best information is directly at the end of this post.
I have scored it out instead of deleting just in case you find it useful.
Green Orange N1-Y
I thought i'd make this thread to help other users who may search similar to me.
None of this content is my own - i've just spend weeks finding it and thought I might save other people's time.
Many tools and guides linked here may brick your phone.
I recently purchased a "Green Orange N1-y"
A Chinese phone with decent specs, decent build but pretty basic OS.
The phone appears to be the Green Orange company's phone for YunOS but comes with a mish mash of GO's MyUI and YunOs combined- it's bog standard 4.2.1 with useful stuff missing.
The first thing I did was search on this forum about the phone.
Recommended Tools:
MTK Droid Tools: http://forum.xda-developers.com/showthread.php?t=2160490
Sp Flash Tool http://forum.xda-developers.com/showthread.php?t=2650125 (although I used an older version from another website I cannot quite find)
MTK Mobile Uncle: https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en_GB
My phone was already rooted so I didn't have to root it.
I've read that iroot http://www.mgyun.com/m/en roots the NY-1.
A guide here may also work but that is for the N1 (different phone!)
I installed CWM using the following guide
http://vondroid.com/threads/how-to-...y-mediatek-mtk6589-device.12003/#.VOo6m_msVSF
I used the boot.img from this rom to help make the CWM.
This meant I could make nandroid backups incase anything messed up (and it did!)
To get into recovery
- turn the phone off
- Hold the power button and Vol+
- Vol+- to move, power to select
My phone came with an Android 4.2.1 version or "MyUI".
I used CWM to install This 4.2.2 Version of MyUI
It wasn't great- but it was better than what I started with!
I also installed a developer version of YunOS that I got from here
It ran fine but didn't seem to like any alternative launchers so I went back to the above rom.
Useful Chinese Forums
http://bbs.qingcheng.com/forum.php
http://bbs.yunos.com/
http://rom.apkhot.com/ (I never used this one but it seems to have lots of content)
Installing Flashing Rom Using Flash Tool.
Many of the roms availalable for the GO NY-1 can be installed via Flash Tool
This video shows method (but for different phone)
Personally I never did it this way as I was scared of losing CWM and/or bricking my phone.
On the forums above there are many roms that flash using the flash tool but I never tried them!
Hope this might help someone
I've had the phone a month now and figured i'd give my verdict on some of the roms i'd tried.
The rom that came with the phone was a bog standard 4.2.1 rom with Green Orange's MYUI OS.
I contacted the website I purchased it from and they told me they put a rom from Needrom on it.
The rom had blatent ad/spyware on it. Whether it was on the needrom rom or the seller - I can't say.
I had a message from to update system.xz (or .xw / .wz)
I did it without thinking and later looked at permissions and noticed this app could install files without permission.
By this time, the app had installed about 5 games apps that had been silently installed.
From bbs.qingcheng.com I found this rom: http://bbs.qingcheng.com/forum.php?mod=viewthread&tid=77600&highlight=N1-Y
Pros: Rooted.
Works well with additional launchers/ lock screens
Apps to SD works great
Cons:
Bug where notifications volume doesn't change with silent/vibrate/sound profiles
Apps that use apps 2 sd still use phone storage for files
Some apps forget accounts (OneDrive/ Twitter) if they are moved to SD
AliYun OS
Pros:
Smooth, looks good.
Volume profiles work well
Cons
No alternative launcher/ lock
No apps 2 sd
There are a number of MIUI ports
Pros:
Smooth roms.
All pluses of MIUI
Allows launchers and locks
Cons:
Some incorrectly read memory as 1GB
No apps to SD
LewaOS
Pros: Looks great
fast and everything seems to be decent
Cons
No apps to SD!!
Baidu Cloud
I installed this but it was all chinese so quit early.
Another post (in case it helps anyone)
I was pretty much at the end of my tether with this phone.
Good hardware*, good build, nice looking but poor software.
I was probably going to give up and purchase a new phone (Xiaomi or Elephone)
*GPS is only hardware issue.
Most MTK devices seem to have poor GPS and every rom i've used has given equally poor GPS.
With the Streamlining ROM, it'll take a minute to find GPS and then holds it fine for driving.
Of the roms above MyUI Streamlined version is definitely the best but still wasn't cutting it for me.
The N1 and the N1-Y are different phones but a rom for the N1 will work on the N1-Y.
The only problem is that "sensors" don't work.
I take "sensors" to mean Proximity, G Sensor and possibily GPS.
Most of the N1 roms install and function "OK" - most don't do apps 2 sd properly or have audio issues or language barriers.
Until I found a Stock Android 4.2.1 Rom here for the N1.
I've been using it for 24 hours and it's better than any rom i've used on the device.
Apps 2 sd works fine (I use Link2SD which works great at batch moves), Audio profiles work great.
It has a G-Sensor calibration which (I think) has that sorted.
The proximity sensor was sorted using a "proximity fix" app which meant I no longer had a black screen after finishing calls.
Most issues with other ROMS did not appear on this ROM except GPS and camera
The stock camera app doesn't choose res properly.
Camera MX gives 10m but 13m doesn't work.
GPS is a common issue.
A common fix for MTK GPS is EPO.
This rom wouldn't download EPO files so I manually downloaded them and transferred them via root browser.
i'll test it out later..
Tested out GPS and it wasn't easy but got it working.
i had to download and transfer the MTK EPO files to data/misc manually (i searched it on here)
i also downloaded an app called faster gps and chose my region.
i googled mtk gps and followed multiple guides.
GPS then worked but took about 2 mins to get a lock.
Update: stock camera works fine if aspect is changed so that you have 8m back/ 5m front
Further update
I just managed to install an official xolo rom for the q1000s using cwm.
Everything seems to be working really well - much better than any rom i've used on this device (and I've used lots)
It's still 4.2.1 but all hardware works as it should.
Noticable differences from other roms:
Camera is spot on,
GPS gets a 10s lock (with usual MTK tweaking),
Sound profiles work fine,
Lockscreen notifications work (they don't in most other roms)
Music control in lockscreen.
How to install Q1000s ROM
Xolo Q1000s Rom – Works on GO N1-Y
Requirements:
7zip http://www.7-zip.org/
CWM Recovery
Downloads:
Download Q1000s ROM: http://www.xolo.in/xolocare/software-update?page=3
Instructions:
Use 7zip to open update.zip
Open “META-INF\com\google\android\updater-script”
Delete the checks:
“assert(getprop("ro.product.device") == "XOLO_Q1000S" ||
getprop("ro.build.product") == "XOLO_Q1000S");”
Save inside archive
Optionally you can change the build.prop so it still says GO N1-Y instead of Xolo Q1000s
Transfer to phone
Install using CWM
Issues: will remove CWM but CWM can be easily reinstalled using Mobile Uncle
Hints to make rom better:
Root using iroot
Uninstall xolo apps
GPS: Get MT GPS & Faster GPS – 10s lock!
Link 2 SD
Link to un-altered Xolo Q1000s Rom
This will not flash unless you follow steps above
https://mega.nz/#!kZt1VBhD!Zof-jLyoYZP6LcLB6haPRExWn7mcgmL7LLgAY9QgYb8
If you have problems installing the Xolo Rom, this may help:
I tried flashing some Xolo custom roms (with 0% success!) and had to use SP Flash Tool to flash the original rom back onto the phone.
When I went from the MYUI Stock Rom to the Xolo Rom -> I received a boot loop
I then installed the MYUI Streamlined for the N1-Y (http://bbs.qingcheng.com/forum.php?mod=viewthread&tid=77600&highlight=N1-Y)
I then installed the Android Stock Rom for the N1 (http://bbs.qingcheng.com/forum.php?mod=viewthread&tid=78177&extra=page=1)
I then installed a Samsung imitation Rom (http://bbs.hxzhpc.com/forum.php?mod=viewthread&tid=604&extra=page=1)
along the way- I factory reset if it didnt work properly
Then the Xolo Rom worked perfectly.
I have no idea why
Further update
I've moved on from the Green Orange but using it as a spare device/ remote in the home
The best way seems to be to flash a XOLO Q1000s rom using SP Flash tool to make the phone believe it is a Xolo
http://www.xolo.in/software-update?Device=Q1000s
UNfortunately I can't find a rom that goes beyond 4.2.1
Just got my device yesterday. I came with Android 11 (OneUI 3.1) pre-installed. The Android experience was slow and laggy. I did also do a update (3.1 -> 3.1), but this did not help. I did notice something similar on my OnePlus 7 after the Android 11 update and it has a Snapdragon 855, not this much slower Exynos. So i downloaded the latest Android 10 from SamMobile, flashed it with Odin and indeed, the UI is noticeable more responsive. This is NOT a placebo! Let me know if you did/do experience something similar ;D
Instructions for WiFi only version:
# Warning! All data on the local storage will be wiped! So sync all Cloud apps and backup any local data you want to keep!
# I am not responsable for damage of any kind!
1. Get a free Account on SamMobile
2. Goto https://www.sammobile.com/samsung/firmware/SM-P610/#SM-P610 and select your country
3. Grab the latest Android 10 and download (takes about 8 min.) and unzip with WinRar (It's the fastest)
4. Grab the latest Odin https://odindownload.com/ and open the firmware:
- BL_[...] -> BL
- AP_[...] -> AP
- Dismiss CP in Odin
- CSC -> CSC_[...]
- Dismiss HOME_CSC_[...] which is included in your new firmware.
- Dismiss Userdata in Odin
4. Make sure that enough battery is left. Something like 40%+.
5. Shutdown you tablet, press Volume Down + Volume Up and connect your original Samsung USB to your pc. Wait until download more shows up, then you can unpress the keys. Press volume up to continue and press the start button in Odin
(Update)
I've installed Android 10, set is up and then updated to 11 with the settings method. My tablet is running now pretty smooth... I don't know why this is but for me this worked!
I noticed this as well, I was super disappointed by how laggy and slow everything seemed to be right out of the box! I flashed Lineage and it's so much faster, but I miss the Samsung apps, I'll have to try Android 10!
i had a Tab A7 with Android 10 for testing and even with its lower hardware it was much smoother than my tab s6 lite @ Android 11. kinda disappointing... thinking about flashing lineage but i dont want to miss the Samsung Apps like Notes and the features for the S-Pen since im using this for studying
merlin.berlin said:
i had a Tab A7 with Android 10 for testing and even with its lower hardware it was much smoother than my tab s6 lite @ Android 11. kinda disappointing... thinking about flashing lineage but i dont want to miss the Samsung Apps like Notes and the features for the S-Pen since im using this for studying
Click to expand...
Click to collapse
I would recommend you to find alternatives or solutions for the features you would lose when making the step. Installing LineageOS 18.1 has kept me from ditching my Tab S6 Lite in favour of a costlier tablet - I'm actually quite happy with the thing now, both in terms of performance and battery life.
ShotSkydiver said:
I noticed this as well, I was super disappointed by how laggy and slow everything seemed to be right out of the box! I flashed Lineage and it's so much faster, but I miss the Samsung apps, I'll have to try Android 10!
Click to expand...
Click to collapse
Hi. Please tell me how you came from stock to LOS? I am interesting how to install TWRP? I tried to install but after installation via Odin i can't boot to TWRP. Pease help me.
I don't know what you are talking about! I have buy the s6 lite wifi with Android 10 on it... I have installed Android 11 when he came out and I don't see and have any problem like that.... Sure is not as fast as my S21 ultra but is perfectly fine for me for this kind of tablet.
Does this break SafetyNet? Will banking apps and Netflix still work?
trueToastedCode said:
Just got my device yesterday. I came with Android 11 (OneUI 3.1) pre-installed. The Android experience was slow and laggy. I did also do a update (3.1 -> 3.1), but this did not help. I did notice something similar on my OnePlus 7 after the Android 11 update and it has a Snapdragon 855, not this much slower Exynos. So i downloaded the latest Android 10 from SamMobile, flashed it with Odin and indeed, the UI is noticeable more responsive. This is NOT a placebo! Let me know if you did/do experience something similar ;D
Instructions for WiFi only version:
# Warning! All data on the local storage will be wiped! So sync all Cloud apps and backup any local data you want to keep!
# I am not responsable for damage of any kind!
1. Get a free Account on SamMobile
2. Goto https://www.sammobile.com/samsung/firmware/SM-P610/#SM-P610 and select your country
3. Grab the latest Android 10 and download (takes about 8 min.) and unzip with WinRar (It's the fastest)
4. Grab the latest Odin https://odindownload.com/ and open the firmware:
- BL_[...] -> BL
- AP_[...] -> AP
- Dismiss CP in Odin
- CSC -> CSC_[...]
- Dismiss HOME_CSC_[...] which is included in your new firmware.
- Dismiss Userdata in Odin
4. Make sure that enough battery is left. Something like 40%+.
5. Shutdown you tablet, press Volume Down + Volume Up and connect your original Samsung USB to your pc. Wait until download more shows up, then you can unpress the keys. Press volume up to continue and press the start button in Odin
(Update)
I've installed Android 10, set is up and then updated to 11 with the settings method. My tablet is running now pretty smooth... I don't know why this is but for me this worked!
Click to expand...
Click to collapse
Sir , This guide will work for Android 12 to Android 10/11 downgrade, Because My tab is very much lagging and I flashed Lineage, Yes Lineage is smooth but I miss Sammy apps like Samsung notes !! can I do this method to downgrade from A12 to A10?
Try it... let us know how it goes. GL