Hi guys, help me out here. I downloaded the custom ROM for my lenovoa526 from the link provided in the xda. I remember something mediafire.com ... I choose the android lollipop ROM and successfully downloaded but the problem arises when I'm trying to flash it." INSTALLATION ABORTED " is being displayed while trying. I have ROM manager v5.5.3.7 and cwm recovery. I tried manually too but was unsuccessful in it. Help me out guys.
Hello Dear ,
Re download the rom , probably u download corrupted file zip or bad internet during downloading ok & always before u start flashing just do quick test by checking md5 if its same or not ok
Thank You ,
Deleted
Guide me with the link,custom ROM for lenovo a526
Can you provide me the working link please. Because sometimes I get surveys and all in the link. Guide me with it if you can kindly and ya I didn't get ya... Check md5, what's that?
Emmmmm about md5 the rom developer he should give u the md5 & check it by this app ok
https://play.google.com/store/apps/details?id=com.fab.md5
About working link sorry i don't know what's the rom u download it to mirror it so please for this ask on thread or ask developer for another mirror ok
Hi, I did check my md5 checksum and it was fine. But I once again downloaded the android L.zip file as u said and tried, still same issue. Installation aborted. My backups were successful still my backup won't show in ROM manager backup section whereas in recovery mode it is there. I don't find my custom ROM too, while trying to install ROM from SD card all files and folder I get to see is of internal memory(phone memory). This happens when I open from ROM manager. If I directly go to recovery mode manually volume up+ power button there I see my backups and downloaded custom ROM. I don't know what's the issue maybe because ROM manager doesn't support lenovo a526 because my device was not listed in it. I flashd the cwm recovery manually and choose the 3xx option for recovery. Again for the information my details: phone model - lenovo a526 v4.2.2, ROM manager v5.5.3.7, cwm recovery 3xx . help me man.
Sent from my Lenovo A526 using XDA Free mobile app
Is that rom support ur device ? If yes then it should work just fine mate if not then ask rom developer he only can give u right answer ok mate & about rom manager maybe that's issues ur device not supported ..
Related
i go into recovery from rom manager to flash a ROM or a kernel but i keep getting an error saying installation aborted with an open android and a red triangle.
Possibly a bad download. Try checking the MD5 Sum.
Sent from my R800i using xda premium
Can be also an incompatibility with CWM recovery. If you re-download and have problems again, try chaning your recovery.
I unrooted ,locked the boot loader and again rooted installed the twrp recovery still I get the same error .... Even when I download busybox form market it does not install it says I'm not rooted . But i am able to flash kernels but not roms ..
Are you sure that the rom is zipped well?
I can give you answers on how to solve your problem , visit this link .
http://www.neopeek.com/viewtopic.php?t=7281
Skyღ said:
Are you sure that the rom is zipped well?
I can give you answers on how to solve your problem , visit this link .
http://www.neopeek.com/viewtopic.php?t=7281
Click to expand...
Click to collapse
I was wondering if it was zipped well, cause CWM rom signature is disabled, so I tried zipping with WinRAR instead of 7zip but to no avail.
Does the fact that I had to OVERWRITE files in order to modify the updater script change something ? If I understand correctly from the thread you pointed to, META INF lists the files the zip should contain. Since I had to overwrite some, I guess it's normal that install fails, right ?
Damnit! All because I cant get the ray to self identify as ST18i or ST18a but instead I dont know why it says it's a ST18..
This happened to me once, because I wiped my sd card. To bypass this, I erased the first line of the build prop in the rom, so cwm (or twrp) will not check if the device is compatible with the rom.
Clockworkmod
kkmindfreak10 said:
i go into recovery from rom manager to flash a ROM or a kernel but i keep getting an error saying installation aborted with an open android and a red triangle.
Click to expand...
Click to collapse
Try to update or install the last clockworkmod with rom manager. that happen to me with the tmo s3 firts time i root it and install the clockworkmod 5.0.3 then i updated to 6.0.3...... and good to go.
hope work for you
!JORGE! said:
Try to update or install the last clockworkmod with rom manager. that happen to me with the tmo s3 firts time i root it and install the clockworkmod 5.0.3 then i updated to 6.0.3...... and good to go.
hope work for you
Click to expand...
Click to collapse
Having the same problem as him but mine is 6.0.5.0
hi guys , I have a penta is701c which I have rooted successfully.
I want to install a rom and for that I downloaded clockworkmod rom manager but it says that I need to setup a "custom recovery"
when I clicked on "install or update recovery", it said my device is not supportd and asked if I had installed a cwm based recovery manually
what do I do now?
ps: when I clicked yes it asked me which version - 2x + or 3x + so didn't know wat to do ..
arnavb8 said:
hi guys , I have a penta is701c which I have rooted successfully.
I want to install a rom and for that I downloaded clockworkmod rom manager but it says that I need to setup a "custom recovery"
when I clicked on "install or update recovery", it said my device is not supportd and asked if I had installed a cwm based recovery manually
what do I do now?
ps: when I clicked yes it asked me which version - 2x + or 3x + so didn't know wat to do ..
Click to expand...
Click to collapse
its normal bro....search the cwm for ur phone in google .... u l find and just flash it....
dont forget to press thanks
wait, do I need cwm for installing roms on my device or is it just required to keep your settings saved ?
on a side note are there any alternatives to cwm as I cant figure out how to use cwm for my device ..?
arnavb8 said:
on a side note are there any alternatives to cwm as I cant figure out how to use cwm for my device ..?
Click to expand...
Click to collapse
custom recoveries are the base for rooting and installing custom roms. I am quite surprised by how you managed to root successfully without installing a custom recovery.
My kind advice dont do anything without proper knowledge.
U can find clockworkmod recovery on the playstore
u can find all ur answers here in the xda forums
so read well before u flash
no dude , I got the cwm rom manage from the play store.. the trouble comes when I try to set up "custom recovery".. the thing is , cwm doesn't support my device and it requires me to manually install a cwm based recovery.. which I don't know how to do.. so any instructions on how to do that (or some alternative to cwm ) would be really helpful
thanks
arnavb8 said:
no dude , I got the cwm rom manage from the play store.. the trouble comes when I try to set up "custom recovery".. the thing is , cwm doesn't support my device and it requires me to manually install a cwm based recovery.. which I don't know how to do.. so any instructions on how to do that (or some alternative to cwm ) would be really helpful
thanks
Click to expand...
Click to collapse
then try installing the latest version suggested by the rom mangaer.
You could also try the twrp recovery. These recoveries support the rom manager
hope i helped
arnavb8 said:
wait, do I need cwm for installing roms on my device or is it just required to keep your settings saved ?
Click to expand...
Click to collapse
yu require cwm for installing roms bro...
roms are flashd through cwm
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing
Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:
CyanogenMod 11 for Micromax A092
Ported by darshan1205 (Darshan Manjrekar)
Bugs Known
2.99 GB partition not detected
Move to SD not available
Flash KitKat Firmware via fast boot to prevent FCS
Hit Thanks:good:
Link:https://www.4shared.com/zip/LBaTW5Lice/CM11-20150512-UNOFFICIAL-UNITE.html
Screen shots
System UI Crashes
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working
prajwal2001 said:
when i installed it worked fine for a little bit of time but after that it says system ui has stopped working and if i open security settings it says settings has stopped working
Click to expand...
Click to collapse
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk
darshan1205 said:
Flash Kitkat Firmware then flash this ROM ...
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Where can I get kitkat firmware (first time installing a ROM )
prajwal2001 said:
Where can I get kitkat firmware (first time installing a ROM )
Click to expand...
Click to collapse
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Link: https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk
Sent from my YU5510 using Tapatalk
darshan1205 said:
Download this KitKat Firmware of Moto A310 [a rebrand of Micromax A092] & flash it through fastboot
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Ok I fastbooted and installed kitkat firmware now i just have to install the rom right
---------- Post added at 08:26 AM ---------- Previous post was at 07:48 AM ----------
It Worked Thanks Alot!!!! Bhai:good
The ROM is working smoothly but the viberations for keyboard home and back button are not working
please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help
pradeepkurmi said:
please help,
I flashed my phone by vroot. now Imei is showing null. no internal sd card is detected in phone but while attaching it with computer it shows.2.99 Gb available.
how to recover all those things again if i had not made any recovery for it
while updating in recovery mode everytime it shows verification failed installed aborted so updated version are not installing.
Plz Plz Plz help
Click to expand...
Click to collapse
First download the KitKat firmware from this link https://drive.google.com/file/d/0B6oh79olFl8jSWk0dTRQcUJKYkE/view?usp=drivesdk then extract it using winrar and open the folder fastboot download in it and double click on 8x10_fastboot_all_images and turn off your phone and then press and hold power button+volume down when you see the micromax logo connect it to your computer with usb and it flash kitkat on it then flash the cm11 rom via recovery
Please can you contact me via email. My email id is [email protected]
and my whastapp no. is 9699961332
I know how to flash Via recovery. Open Recovery Mode and select install from Sd card then select any update.zip but i dont know how to flash kitkat on it. Plz Help. Also i cannot find cm11 rom in this zip.
got it i had installed custom rom via fastboot but now wifi is not working
This link is not working please repair it or provide a new one
i done flash of your rom then i cant open my sequrity setting i.e, it was showing me "unfortunately, setting has been stopped"... Then i saw yr firmware that is something stuff fix kk.. i dont it same.. it all finished successful. the real part is now i cant open my recovery screen else the boot screen is in loop.. so give me some idea stuff which repair this thing. HELP!! And if im pressing volume with power.. it again and again restart please help: Anyways thanks brother.. now its Fine .. Thanks a ton.. can u uploads more updated rom like marshmallow??
link not working
on clicking the download option it displays invalid signature. please update the link
My phone gets stuck at boot image nothing happens in both phone and PC......
It shows waiting for device in PC and mmx liogo in phone forever
Resurrection Remix 5.7.3 for Micromax Canvas L A108
This is the first ever custom rom developed for the Micromax Canvas L a108 phone that was released in the year 2014 and I definitely think that there are many people who are desperate to get a single custom ROM made for this phone as soon as possible because it has Android KitKat as the last update on this phone and the phone is now aging so to keep the support on I have ported this wonderful Resurrection Remix 5.7.3 for this phone
What's working
Everything that I have tested to my knowledge in the 7 days.
People can definitely post the comments regarding the performance and all other issues in the comments but I have just ported it from the excellent guide made by Ajit Guraya
Instruction to flash the custom ROM
1. make sure to make a nandroid backup before you start doing this because there is always a possibility that everything can go wrong,so it is better to have a backup
2.Boot into the custom recovery (CWM, TWRP, CTR, any other recovery )(the link of the TWRP recovery is now provided )
3.Do a complete clean wipe off the data, cache, system
4.Now head towards the location in which you have stored the file preferably in the SD card so that you don't lose that file while wiping off your data.
5.Now go to install the zip file of the ROM and then the Gapps package.
6.Now reboot.
Booting for the first time it will definitely take some time because install the required packages so wait for some minutes the phone will automatically boot and you will be guided through the initial settings
And voila! you have a brand new Android Marshmallow install on your Micromax Canvas A108
N.B-Installing custom rom you may feel that you have a very shortage of memory so please before doing this stuff you can always go to this thread mentioned below to increase your system partition to 5 GB instead of the normal 1.25 GB so that will get enough space for your applications
https://forum.xda-developers.com/android/development/cwm-recovery-micromax-a108-l-t2867010
But remember if you use the CWM recovery mentioned in that forum then it is not compatible with the new Android Marshmallow custom ROM,What I am suggesting you to just use the EBR files to expand the storage only
Here is the download link for the custom ROM.
https://drive.google.com/file/d/1TE_MVmvIDqhM6o-pLN9-tg6t2m3MLc9S/view?usp=drivesdk
Now the TWRP recovery is completely fine and ready to be flashed
Download link-https://drive.google.com/file/d/0Bx7uPg_aat14ZFhJOTBKNGtpZklCWm5LQjUwdnc5UzlKbEtF/view?usp=drivesdk
Thank you master Pratik Rawat for your kind help in getting a TWRP recovery right.
Some notes:
1.Regarding the expansion of the storage if anybody wants to expand the storage with the help of the external SD card then I am sorry that it is not possible because it is a bug in the CyanogenMod 13 upon which our ROM is based do this is one of the prime feature of Android Marshmallow but I regret that is not possible due to the problem from the source.
2. If anybody wants to expand the internal storage then that is possible by the help of the EBR files mentioned in the another forums whose link is given in this post but I want to mention that that is not possible to flash by using the TWRP recovery because it is not having the flashable format so the users have to use the SP Flash tool in order to get that..
To flash TWRP recovery in phone I suggest to install the flashify after rooting the phone with the king root in the Android KitKat.
Please use to TWRP recovery mentioned in the forum instead of the CWM recovery that is mentioned in the another forum because only this recovery is compatible with the Android Kit Kat and above.
3. If any user faces the problem of wiped IMEI then you have to go back to the KitKat by using the format all + download option in the SP Flash tool and then use the MTK engineering mode to write the IMEI.
Update: regarding the Restoration of the IMEI master Pratik Rawat has deviced a method to flash the IMEI number for this everybody is required to flash the package using TWRP recovery after the installation of the custom ROM-
https://drive.google.com/file/d/1MXz_9T_ESUkSdE3eTuegndzyqjp1yEPS/view?usp=drivesdk
THEN AFTER THE SUCCESSFUL INSTALLATION USERS CAN INSTALL THE CHAMELEON APP AND WRITE THEIR IMEI NUMBER EVEN ON THEIR NEW CUSTOM ROM.
The link to download the application-
https://drive.google.com/file/d/1VP3y-xr1JpxQHbDVKvj9O_rpP5mF9RRl/view?usp=drivesdk
I hope for now this much of the information can be useful as of now and further more discussions will be happening as more people will be installing the rom and finding more doubts.
I will be more than happy to help.
:good::good:
You can download the Google application package from the website opengapps.org
For making this process in video
Sir first thank very much
This process seem very hard sir please make an video on it please.
---------- Post added at 08:10 AM ---------- Previous post was at 07:21 AM ----------
opengapps.org which package i choose it very confusing.
Didnot work
When i am try to install custom rom this call install abort. And same for Google app.
ashokbharia said:
Sir first thank very much
This process seem very hard sir please make an video on it please.
---------- Post added at 08:10 AM ---------- Previous post was at 07:21 AM ----------
opengapps.org which package i choose it very confusing.
Click to expand...
Click to collapse
Regarding your request to make a video on the process I think I cannot do at the time because I don't have the device right now and for the open gapps you may refer to the smallest package available that is the Pico one for android 6.0.1
ashokbharia said:
When i am try to install custom rom this call install abort. And same for Google app.
Click to expand...
Click to collapse
If you try to install the custom ROM without having any custom recovery I mean you are trying to install with the stock recovery then you are going to get the same message because it will not allow any installation of foreign software into the mobile
About custom recovery
Sir where i how i am get custom recovery.
I am also use flashfy for custom recovery and use recovery which provides by xda
ashokbharia said:
Sir where i how i am get custom recovery.
I am also use flashfy for custom recovery and use recovery which provides by xda
Click to expand...
Click to collapse
That is the problem that I have mentioned in the main post that I don't have the recovery image with me at the current time because I have lost it and I am not able to do the same thing because my current PC is not taking the parameters correctly.
I need someone to do that for me as it is a very automated process so anyone can do that and see it.
Sorry for this lacunae in the post but at the current time I cannot do anything for the custom recovery for this phone but what I can guarantee you that this custom ROM is perfectly fine for this mobile because I am already use that with my previous custom recovery which I have lost now.
About custom recovery
Sir can custom recovery was installed throught mobile.
If not then what is driver (Google it) say by xda
What serch i am on Google
ashokbharia said:
Sir can custom recovery was installed throught mobile.
If not then what is driver (Google it) say by xda
What serch i am on Google
Click to expand...
Click to collapse
You can search for the easy magic philz touch recovery for mtk
You can follow the guide to make a custom recovery and you may be successful if you are lucky enough with your PC
@SanketMohapatra Where's the kernel source for this ROM (if it's available)?
Sent from my Samsung Galaxy Trend Plus using XDA Labs
DodoGTA said:
@SanketMohapatra Where's the kernel source for this ROM (if it's available)?
Click to expand...
Click to collapse
As a matter of fact I want to tell you that this phone is from the company Micromax which is known for its irregularity in releasing any of the resources for the developers I think it has never released the any kind of kernel sources for any devices just the company releases a phone and forgets about it
So the obvious answer is there is no sources available for this phone and just replaced all the files from the stock to port and the ROM is working
No recovery found
Sir
I am try recovery which provides by xda by its didnot work please try to upload an recovery which installed through phone.
I konw you lost it but sir try to rebuild it or recover it.
ashokbharia said:
Sir
I am try recovery which provides by xda by its didnot work please try to upload an recovery which installed through phone.
I konw you lost it but sir try to rebuild it or recover it.
Click to expand...
Click to collapse
I know I am trying my best to upload a recovery as soon as possible but it is a kind a very difficult for me because I don't have the device now right now in my hand and I cannot test anything without a device and that I don't have a good PC now to get it done so please be very patient until and unless you get it by yourself or i do it
ashokbharia said:
Sir
I am try recovery which provides by xda by its didnot work please try to upload an recovery which installed through phone.
I konw you lost it but sir try to rebuild it or recover it.
Click to expand...
Click to collapse
I know I am trying my best to upload a recovery as soon as possible but it is very difficult for me because I don't have the device now right now in my hand and I cannot test anything without a device and that I don't have a good PC now to get it done so please be very patient until and unless you get it by yourself or i do
Don't worry I'll be coming back soon with TWRP recovery for this mobile because I have found out a way in which I can do that again so please be patient
Due to lack of the resources now I am not able to post recovery for mobile but I can give the link website in which there is a very good discussion about what to do and how to port recovery-
https://irisbuddies.blogspot.in/2016/03/how-to-port-philzctrcwmtwrp-recovery-to.html?m=1
But in case if you run into trouble no problem you can always come back to the original version by flashing this file (instruction mentioned in this files)
https://firmwarefile.com/micromax-a108
Good news! The TWRP recovery for this phone is now a work under progress so please be with us until and unless we release it