I would like some instructions on rooting this unit. I have in my download folder these two aps: com.alephzain.frameroot-1.9.apk and de.robv.android.xp...r_v33_36570c.apk. Is there something else or less I need? Actually, need some help on this. Thanks.
Related
Hi guys, I'm kinda lost by now.
I tried to root my Moto G 1st Gen today, but whenever it was supposed to reboot again after to rooting process, I got the "dead" android with the no command warning. So I tried to some alternatives with the only result that my phone is now stuck in a bootloop. Luckily I can still access the bootloader menu, but when I try flash back to the firmware, I get the hab "check failed for boot" and recovery message, with the result that it doesn't work and I'm still in the same situation. I guess I have the wrong firmware but I can't seem to find the correct 1st gen xt1034 firmware for a german phone.
So yeah, if you could help me, that would be reaaaaally great, and if you need some additional information, I'll try my best to find it out.
Cheers
Hi,
you are sure you have an xt1034 german phone? From what I read, the xt1034 is special to America, so you should find your answer here. Good luck on reviving your phone!
///// YES I KNOW THERE ARE MANY GUIDES FOR THIS BUT I AM AN EXTREME NOOB AND I NEED VERY SPECIFIC INSTRUCTIONS ON HOW TO DO THIS, I AM NOT ABLE TO FOLLOW THE GUIDES ////
Hello, I have a Moto G first gen single-sim card phone (XT1032) and it has Cyanogenmod 13 flashed on it. After flashing, my phone was not able to record video or sound, it does not use my cellular data for some reason (my network operators couldn't fix it and said it was because of the phone) and it has a few other major issues. I believe there have been 3 more updates for CM13 and if they fix these issues, do tell me how to install them instead of stock Android 5.1
If they have not fixed the issues (which I believe they have not ) please PLEASE explain it in great detail how to flash my stock ROM (completely stock). I had a problem before where I tried to follow a guide and the bloody thing had not told me to install moto g drivers and just assumed I would have known how to/ that I already had them installed, and that screwed me up.
I know this is a lot to ask but I need this to be running normally for next week.
I cannot stress this enough, please describe EVERYTHING in detail, thank you very very much.
Hello Everyone,
I'm in need of help. I rooted my device XT 1096 and it got soft-bricked. I was able to get it working again. While it updated automatically to Lolipop, it died. Its now dead/ hard-bricked .
I tried doing the blankflash but I think my model's blank flash files aren't available yet. I took it to the market and they said it needs to be fixed with Jtag.
They have several Jtag boxes of different companies, but none of them supports my model. So I was hoping if anyone can help me find either
1) the right Blank flash files for my model (Moto X XT 1096)
or
2 ) The Dll file for the Jtag for my model. Please mention the Jtag box as well to use for that dll file.
Thank you
No Reply yet pls guys help me
Did you tried this? https://forum.xda-developers.com/moto-x-2014/general/retail-marshmallow-xt1097-mpe24-49-18-t3275894
I think this is your solution for bricked Moto X series, thanks to Gundabolu SC: https://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
My moto e 2015 xt1521 lte doesn't bootup( it shows "boot up failed connect to pc for software repair") up and I have tried ways to revive it back but it turns out to be a failure. After some research on web I have come to the conclusion that I am in need of Moto-xt-1521 firmware for 6.0/mpi24.65-39-4/3 which is not available in any website. It would be highly appreciated if anyone is able to help me out.
JOEL JOE PIOUS said:
My moto e 2015 xt1521 lte doesn't bootup( it shows "boot up failed connect to pc for software repair") up and I have tried ways to revive it back but it turns out to be a failure. After some research on web I have come to the conclusion that I am in need of Moto-xt-1521 firmware for 6.0/mpi24.65-39-4/3 which is not available in any website. It would be highly appreciated if anyone is able to help me out.
Click to expand...
Click to collapse
I was also looking to root and reset and found image in the below link. But i don't know if it works or not.
Motorola Moto E XT1521 Firmware (Stock Flash File ROM) - Firmware File
Motorola Moto E XT1521 Firmware (flash file ROM) is used to repair stuck at the Moto Android logo quite easily. This file also help to
firmware-file.com
So I'm having issues and not with the device just rooting in general years ago I remember i could just use a simple one click root but now it's way more deferent but I understand how it's done I been doing research my and found out my phone couldn't be rooted because it was a track phone so I went ahead and got a new one from Motorola and the build number is xt2115-1 definitely different then the last so what my issue is rooting requires a boot image but for the life of me I can't find a boot image so I can use magisk is it still possible to root this phone?
You're asking about the Moto G Stylus 2021. This section is about the
Moto G Stylus 2020 (Moto G Pro).
zapjb said:
You're asking about the Moto G Stylus 2021. This section is about the
Moto G Stylus 2020 (Moto G Pro).
Click to expand...
Click to collapse
Shoot sorry can you like me to the right place I'm kinda new here lol
ShadowFox141 said:
So I'm having issues and not with the device just rooting in general years ago I remember i could just use a simple one click root but now it's way more deferent but I understand how it's done I been doing research my and found out my phone couldn't be rooted because it was a track phone so I went ahead and got a new one from Motorola and the build number is xt2115-1 definitely different then the last so what my issue is rooting requires a boot image but for the life of me I can't find a boot image so I can use magisk is it still possible to root this phone?
Click to expand...
Click to collapse
The boot img file has to be taken from the backup file from stock rom and converted thru notepad at least thats the way i rooted my 2021 version stylus .I haven't seen any custom roms so i just rooted stock rom there was another site i found that showed how to do it .https://www.androidinfotech.com/root-moto-g-stylus-2021-android-10/
[email protected] said:
The boot img file has to be taken from the backup file from stock rom and converted thru notepad at least thats the way i rooted my 2021 version stylus .I haven't seen any custom roms so i just rooted stock rom there was another site i found that showed how to do it .https://www.androidinfotech.com/root-moto-g-stylus-2021-android-10/
Click to expand...
Click to collapse
2021 https://forum.xda-developers.com/f/moto-g-stylus-2021.12073/
2021 5G https://forum.xda-developers.com/f/moto-g-stylus-5g.12373/