Related
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Try odin?
I have tried GTG Unbrick. That's how I've gotten as far as I have.
How long does it usually take? I'm staring at the Odin screen for about 5mins now and it still says "Set Partition" and "DO NOT TURN OFF TARGET!!"
Alright, FIXED, I just needed to keep retrying. It took like 5 attempts to get it going right.
Nate_the_Ace said:
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Click to expand...
Click to collapse
Have you tried....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5
I am ALSO stuck in a CWM boot loop.
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
ummhii said:
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
Click to expand...
Click to collapse
bradman117 was kind enough to put together a thread with links to older Infuse roms and recovery options. One of his links should work. Just be sure to slap him a thanks.
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
chetansaraf said:
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
Click to expand...
Click to collapse
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
... thanx buddy for help but already running 4.3. i cant believe what i was missing. i was just rebooting the recovery where i needed to reboot the system after flashing cm9 1st time. and when i did, wowwww no problems and now phone runnin on 4.3. butterly smooth ...
hi i need help i flash back to stock whit heimdall .. but now im trying to install the unnoficial ... from red recovery everything works but when i reboot after the second flash it just reboots again and again on recovery
wtf now im stuck on 3e recovery
Sometimes I get stuck like that after I flash back to stock. Try wiping the cache in 3e recovery and rebooting. That fixes it for me usually. If not, maybe you could flash again. Hope this helps.
Sent from my SGH-I997 using xda premium
tupirujp said:
hi i need help i flash back to stock whit heimdall .. but now im trying to install the unnoficial ... from red recovery everything works but when i reboot after the second flash it just reboots again and again on recovery
Click to expand...
Click to collapse
did you get it going?
did you select "reboot recovery" while in recovery? thats what everyone ive ever seen with this issue have done. never select that, youll have to odin back to stock if you do.
tupirujp said:
wtf now im stuck on 3e recovery
Click to expand...
Click to collapse
it that your car as your avatar?
:laugh:
Yes sr
Sent from my SGH-I997 using xda premium
I flashed the Jellybam-evita-aopk from one post on the htc one x at&t development it said that you had to wipe the system from recovery i did and i wiped everything i did a factory reset and i when it finished to flash when i enter it just sits there on the jellybam bootscreen where an android goes flying in a rocket .. anyone know how do it stop this?
Sorry for my grammar and stuff i dont know so much english .
When I flashed jellybam it took about 3 to 5 min to boot up. And the rocket ship boot screen would flash a white screen. It did eventually boot up though. Sounds like you doing everything right though.
Sent from my One X using xda premium
Help stuck at bootscreen
jesusitox12 said:
I flashed the Jellybam-evita-aopk from one post on the htc one x at&t development it said that you had to wipe the system from recovery i did and i wiped everything i did a factory reset and i when it finished to flash when i enter it just sits there on the jellybam bootscreen where an android goes flying in a rocket .. anyone know how do it stop this?
Sorry for my grammar and stuff i dont know so much english .
Click to expand...
Click to collapse
Some other information ..
i was coming from a sense rom some newts-jb or something i dont know much about kernel so in the aroma installer i decided to stay on my kernel (Stock one) it had 3 options the cm10 ,another one i dont remember, and continue with your kernel i choose this one
Stuck at bootscreen Jellybam!
subarudroid said:
When I flashed jellybam it took about 3 to 5 min to boot up. And the rocket ship boot screen would flash a white screen. It did eventually boot up though. Sounds like you doing everything right though.
Sent from my One X using xda premium
Click to expand...
Click to collapse
Ok im reflashing the rom and i will now install the kernel...
because the screen it was like 10 mins already..
i just reflashed will answer asap thanks for so quickly response and support
No, is not working
jesusitox12 said:
Ok im reflashing the rom and i will now install the kernel...
because the screen it was like 10 mins already..
i just reflashed will answer asap thanks for so quickly response and support
Click to expand...
Click to collapse
Nope it wont start its actually 10 minutes since it stuck...
what can i actually do? maybe flashing the boot.img on fastboot..? do you think its that?
Have you tried this walk through?
http://forum.xda-developers.com/showthread.php?p=33303798
Hope this helps. I know some jb ROMs are having boot issues if you have a rev-b on your box. No clue what that means though.
Sent from my One X using xda premium
jesusitox12 said:
I flashed the Jellybam-evita-aopk from one post on the htc one x at&t development it said that you had to wipe the system from recovery i did and i wiped everything i did a factory reset and i when it finished to flash when i enter it just sits there on the jellybam bootscreen where an android goes flying in a rocket .. anyone know how do it stop this?
Sorry for my grammar and stuff i dont know so much english .
Click to expand...
Click to collapse
I got the same problem too...i did flash many phones, after update ruu to 2.20 i got this..I think i did all the right stuff but somehow to phone keep getting stuck at bootscreen
subarudroid said:
Have you tried this walk through?
http://forum.xda-developers.com/showthread.php?p=33303798
Hope this helps. I know some jb ROMs are having boot issues if you have a rev-b on your box. No clue what that means though.
Sent from my One X using xda premium
Click to expand...
Click to collapse
ok i will flash the boot.img on fastboot i dont understand rev-b well ... i will try hope it boots now
jesusitox12 said:
ok i will flash the boot.img on fastboot i dont understand rev-b well ... i will try hope it boots now
Click to expand...
Click to collapse
i just noticed the rom zip doesnt haave boot.img... so i cant try to do it
jesusitox12 said:
i just noticed the rom zip doesnt haave boot.img... so i cant try to do it
Click to expand...
Click to collapse
Just noticed that the boot.img is hidden in the zip i will fastboot flash it and then i will update if it boots
I really hope it boots now :good:
jesusitox12 said:
Just noticed that the boot.img is hidden in the zip i will fastboot flash it and then i will update if it boots
I really hope it boots now :good:
Click to expand...
Click to collapse
I was having the same issue, but once you flash the boot.img it should take care of it. I'd be interested to hear if you have any issues when you reboot the phone to see if it gets stuck on a boot loop.
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Mohan211 said:
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Click to expand...
Click to collapse
wiping cache shall be helped you.
re-try to re-flash the cwm..maybe you do it wrong.
H.Style86 said:
re-try to re-flash the cwm..maybe you do it wrong.
Click to expand...
Click to collapse
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Mohan211 said:
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Click to expand...
Click to collapse
What android driver?
Sent from my SCH-I500 using Tapatalk 2
Nevermind I fixed it. Not too sure how but it worked.
Thanks anyway guys!
ndaryruro feudal
Sometimes it's just enough to take out the battery and put it in again
Stuck at boot logo
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
SumitBishnoi said:
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
Click to expand...
Click to collapse
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
No ,Only Auto Reboot and F. Reset Time were checked
SumitBishnoi said:
No ,Only Auto Reboot and F. Reset Time were checked
Click to expand...
Click to collapse
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Stuck at boot logo
bbrad said:
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot . I just flashed back after clearing cache and it worked fine. You people rocks.
I was running Jellybeans 4.1.2 did a factory reset, flashed this 4.3 ML modem, rebooted into the recovery and flashed the Alliance zip. When I I try to start the phone it gets stuck loading the samsung screen and rebooting, I can still boot into recovery by holding the power, home, and volume up and already tried to reflash but I'm still having the same issue.
Should I try an older build or different setting when I set up the rom. The whole set up process works and it seems to install just fine until I try to actually boot the phone.
notaneggspert said:
I was running Jellybeans 4.1.2 did a factory reset, flashed this 4.3 ML modem, rebooted into the recovery and flashed the Alliance zip. When I I try to start the phone it gets stuck loading the samsung screen and rebooting, I can still boot into recovery by holding the power, home, and volume up and already tried to reflash but I'm still having the same issue.
Should I try an older build or different setting when I set up the rom. The whole set up process works and it seems to install just fine until I try to actually boot the phone.
Click to expand...
Click to collapse
Try wiping data and caches in recovery. Then reboot.
Root Wizard said:
Try wiping data and caches in recovery. Then reboot.
Click to expand...
Click to collapse
Tried that twice with no luck, trying to load a different kernal from the set up options and getting stuck at extract:/system/framework/ext.jar for the past 2 hours. If I do anything from here I brick the phone?
Hm, im not sure. But what device are you running?
Sent from my SCH-I535 using Tapatalk
Root Wizard said:
Hm, im not sure. But what device are you running?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Samsung Galaxy SIII SCH-I535 on Verizon.
Can you
enter odin mode?
Sent from my SCH-I535 using xda app-developers app
Root Wizard said:
Can you
enter odin mode?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I can try it I'm just afraid of bricking it.
Well, you can use it to reflash stock JB and stock kernel though....and i know a debrick method that has worked for me when i was bricked.
Sent from my SCH-I535 using Tapatalk
Root Wizard said:
Well, you can use it to reflash stock JB and stock kernel though....and i know a debrick method that has worked for me when i was bricked.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Yeah, I can't enter recovery I'll probably have to pull the battery which as I understand will likely brick the phone since I'm stuck 50% into the flash.
Ok try that and tell me what happens.
Sent from my SCH-I535 using Tapatalk
Root Wizard said:
Ok try that and tell me what happens.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Pulled the battery and booted into recovery no problem. Can I got back to Jellybeans 19 or 20 with the ML1 modem, I was on the original modem when I was running that rom.
Ok, good to know!
Sent from my SCH-I535 using Tapatalk
notaneggspert said:
Pulled the battery and booted into recovery no problem. Can I got back to Jellybeans 19 or 20 with the ML1 modem, I was on the original modem when I was running that rom.
Click to expand...
Click to collapse
Yes. You can run any modem with any ROM. Apparently LTE data does not work correctly on the latest 4.3 base unless you have the ML1 modem, though.
I don't see why Alliance ROM isn't booting for you. Was it in an actual bootloop or just stuck on Samsung logo? I know that the first boot after flashing a 4.3 ROM takes extra long. Also a simple battery pull when it's stuck on Samsung logo sometimes works.
If it was in a boot loop you might have had a bad download. Try re-downloading the Alliance ROM zip and re-flashing!
Wait, how are you getting to recovery on an S3 Verizon 4.3?
Sent from my SCH-I535 using Tapatalk
BattsNotIncld said:
Yes. You can run any modem with any ROM. Apparently LTE data does not work correctly on the latest 4.3 base unless you have the ML1 modem, though.
I don't see why Alliance ROM isn't booting for you. Was it in an actual bootloop or just stuck on Samsung logo? I know that the first boot after flashing a 4.3 ROM takes extra long. Also a simple battery pull when it's stuck on Samsung logo sometimes works.
If it was in a boot loop you might have had a bad download. Try re-downloading the Alliance ROM zip and re-flashing!
Click to expand...
Click to collapse
I'm honestly not sure the difference between a bootloop and the samsung logo. The phone vibrates as part of the boot, Samsung logo comes up, vibrate, black screen and repeat.
I'll download the zip again and start over. Should I try the build 21 first for any reasons?
Try an sd card with written boot to it
Sent from my SCH-I535 using Tapatalk
notaneggspert said:
I'm honestly not sure the difference between a bootloop and the samsung logo. The phone vibrates as part of the boot, Samsung logo comes up, vibrate, black screen and repeat.
I'll download the zip again and start over. Should I try the build 21 first for any reasons?
Click to expand...
Click to collapse
The build number does not matter. You should be able to flash anything. What you are describing is definitely a boot loop. I would try to re-download the build 22 zip. What recovery are you on?
BattsNotIncld said:
The build number does not matter. You should be able to flash anything. What you are describing is definitely a boot loop. I would try to re-download the build 22 zip. What recovery are you on?
Click to expand...
Click to collapse
ClockworkMod Recovery v6.0.4.5
Or try downloading a soft brick debricking software on your cpu
Sent from my SCH-I535 using Tapatalk
notaneggspert said:
ClockworkMod Recovery v6.0.4.5
Click to expand...
Click to collapse
That's the latest recovery so you should be good. The only thing I can suggest is to re-download the zip and try again. Make sure you back up your data and factory reset before flashing (wipe data, cache, dalvik).
If that doesn't work you should be able to flash back to your old 4.1.2 build. Did you make a nandroid?