I didnot flash gapps while flashing my moto e to paranoid. Can anyone tell me the step by step procedure for the same. do we need to flash recovery before doing so . and what is the correct version of gapps for paranoid 5.1 android.
Thanks
XDA Visitor said:
I didnot flash gapps while flashing my moto e to paranoid. Can anyone tell me the step by step procedure for the same. do we need to flash recovery before doing so . and what is the correct version of gapps for paranoid 5.1 android.
Thanks
Click to expand...
Click to collapse
Hello,
You need recovery; Also
A general procedure to clean flash a rom is
Wipe cache,dalvik,system and data
Flash rom zip and gapps.
Reboot.
Regarding gapps, you could use This one
Alternatively you could create a XDA account for a bit more assistance and also would help us to move this thread to Moto E Q&A section for quick and more efficient help.
Related
i got this error while updating. pleASE HElp
danishajaz said:
i got this error while updating. pleASE HElp
Click to expand...
Click to collapse
You have to be complete stock, no root, stock recovery and kernel.
Unrooting and flashing the stock recovery and kernel will NOT work,
you will need to flash the 4.4.4 firmware first.
AgentChaos said:
You have to be complete stock, no root, stock recovery and kernel.
Unrooting and flashing the stock recovery and kernel will NOT work,
you will need to flash the 4.4.4 firmware first.
Click to expand...
Click to collapse
I did flash it to stock ROM but still it showed signature verification failed and some root error. BTW I still have cwm not the original recovery !!
well apparently you dont clearly read the guides,you cant install official updates with custom recovery, you need everything original stock and no root. read the guides first before posting
AgentChaos said:
well apparently you dont clearly read the guides,you cant install official updates with custom recovery, you need everything original stock and no root. read the guides first before posting
Click to expand...
Click to collapse
I downloaded stock ROM from here. But I guess it has cwm recovery image not the original.
If u could point me to pure stock ROM moto g Indian Asian version first gen
danishajaz said:
I downloaded stock ROM from here. But I guess it has cwm recovery image not the original.
If u could point me to pure stock ROM moto g Indian Asian version first gen
Click to expand...
Click to collapse
Visit this thread for the guide and the files
help please
Sir I have the same problem I just wanted to ask u that how can I restore the stock recovery
Of moto g xt1033 I want to remove the custom recovery can anyone tell me that how can I do that I want to update my moto g xt1033 to android l
The only the that is preventing me doing that is the custom recovery so that's why I want to restore stock recovery in my moto g
Thank in advance
mukul panchal said:
Sir I have the same problem I just wanted to ask u that how can I restore the stock recovery
Of moto g xt1033 I want to remove the custom recovery can anyone tell me that how can I do that I want to update my moto g xt1033 to android l
The only the that is preventing me doing that is the custom recovery so that's why I want to restore stock recovery in my moto g
Thank in advance
Click to expand...
Click to collapse
Why dont people read? is it really that hard? look in the thread that I linked in the posts above.
AgentChaos said:
Why dont people read? is it really that hard? look in the thread that I linked in the posts above.
Click to expand...
Click to collapse
it worked thanks so much. that recovery image was the original one u provided. recovery image was not original before
thankkkkkk uuuu
Thnx sir really
But do I have to do all that if I have Asian 4.4.4 already and wanted to just flash original recovery because I have everything stock except recovery
Sry sir if I am asking anything wrong and this is the last question I have
mukul panchal said:
But do I have to do all that if I have Asian 4.4.4 already and wanted to just flash original recovery because I have everything stock except recovery
Sry sir if I am asking anything wrong and this is the last question I have
Click to expand...
Click to collapse
Get the recovery.img and run "fastboot flash recovery recovery.img" from bootloader mode.
Do it at your own risk^^^
everything worked perfectly
I flashed recovery as u advised me then did everything which was suggested in the original thread the only problem was recovery stock recovery is pretty tricky thing to open I had to press volume up for 9 sec for 10th sec the power button at the same time and it worked
Thnx everyone I really appreciate it
Moto G XT1034 4.4.4 to 5.0.2 update problem
I received Lollipop OTA notification for my XT1034 today (Retail Canada) and I downloaded and installed it but the phone got stuck at Motorola logo. I waited for about 45 mins on this screen but got desperate and turned it off (hard reset)
Tried to enter recovery and still it says Bootloader 41.13, tried to wipe cache partition and completed the process but after reboot it gets stuck at logo again, please help!
I tried to install CM12 in my Xperia M2
But it is unsuccessful
I am not sure that my phone is D2305 or D2303
But D2303 was written on the package box
I was following the method and steps in this video
with cm-12-20150126-UNOFFICIAL-eagle and boot-recovery.img from galaxyfreak
One more thing is
After I installed the rom and select reboot system now
It respond that the root access possibly lost and ask me fix it or not...
Than black screen and tremble are present and I can feel the heat of the phone
I am very unhappy with the result and feel hopeless
U must follow instructions in rom threat... some roms needs to be installed over specific rom. Like here. U need flash via flashtool official 4.3 , flash kernel with cust. recovery and then flash CM. Follow instructions
thank you so much
triptaminer said:
U must follow instructions in rom threat... some roms needs to be installed over specific rom. Like here. U need flash via flashtool official 4.3 , flash kernel with cust. recovery and then flash CM. Follow instructions
Click to expand...
Click to collapse
Thanks for your reply
I finally understand " You have to be on STOCK before doing this! Flash stock FTF (look into M2 general section)"
And I installed CM12 successfully
The touch sensor improve so much!!!!!!!!!!!
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
faheemakbar18 said:
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
Click to expand...
Click to collapse
Here ist what i have experienced:
I was on System Version: 181.46.3
Well nevertheless:
It was the most recent version i could get and i wanted to get back to Android L.
I installed CM12 the Following way, I had a lot of problems with that. So here is my experience and everything:
So you need to know, to install CM12 or other CM12 based ROMS you first need to have CM11 installed.
Newer Versions of the recovery might be having problems installing CM11, so i would recommend using PhilZ Touch Recovery. It was working for me.
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
faheemakbar18 said:
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
Click to expand...
Click to collapse
Heyho
I have an XT925.
I installed the msm8960 Build.
The Reason i used the unified Build was, there is no KKBL build for the xt925.
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
faheemakbar18 said:
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
Click to expand...
Click to collapse
Hey Faheem,
i used the latest one, i guess
Found it here.
Link in my first Post was wrong
esok44 said:
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
Click to expand...
Click to collapse
If you come frome OTA Kitkat 4.4.2
you have to change Step 1st: install PhilZ recovery ------ to ------ Install TWRP2710-RAZR-HD_M-KITKAT.img instead then you can flash the CM 11
If you like philz_touch_6.58.7-moto_msm8960.img recovery (it can mount external Memory Card as USB) you can flash it after all installations after Point 11. The only thing that you cannot start directly to recovery from CM 12.1
Guys I was not able to make a backup of stock ROM and flashed cm 12.1 but now I want to downgrade to cm 11
Help me plzz
Hi, thank you for using XDA Assist. If you have cm12 on your device then you must also have a custom recovery. So you should be able to just flash cm11 in it. Wipe data, system, dalvik, and cache first in your custom recovery. For further help see this, http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891 and your device's specific forum here, http://forum.xda-developers.com/moto-e
Hi guys
When I try to install this xposed xposed-v69-sdk21-arm I keep getting stuck at the android lollipop boot screen. Am i using the right version?
Any help please, Im running 5.0.2
thanks for all time and help
I searched the forum and found this thread apparently I need these zips for stock 5.0.2 but i cant find them anywhere.
If anyone could help me i would appreciate it.
cheers
post #1
Download
XposedInstaller_3.0_alpha4.apk
xposed-v66-sdk21-arm.zip
flash the zip by custom recovery
wipe cache and dalvik
reboot
install apk
reboot again
done