Related
Has anyone installed Kali lunix on moto g 2015... If yes please guide me how to do so...
Are you trolling?
Anyways, I have no idea if it's even practical to run a desktop Linux distro on a mobile device....
Didn't give it a try so far. I guess the chroot install with LinuxDeploy will work as this works on pretty much any Android device with the right architecture an Android version ( https://www.kali.org/tutorials/kali-linux-android-linux-deploy/ ). Though I suppose without a modified kernel you will run into issues when actually using it.
After all on the Moto G2 it did work with CM + modified kernel. So it's likely that the same is valid for Moto G3 once somebody provides a suitable kernel.
Development is dead. Please delete..
Rmontoya83 said:
Good news I have a working Linage OS 13 build for the lg stylo 2 Plus GSM. Thought it was bug free still has some issues though . My PC took a dump I have the sources saved on my hard drive I will have a new PC on Feb 6 and will release the Rom For Free probably with in a few days from then. As I'm almost done porting a working lineage OS 14 for the device.
I will update the device tree on Github So I can get help from other devs to trouble shoot these issues better and collaborate works. I will also include a working recovery with the Rom for free . I am doing this in my free time so please be patient .
I will keep you posted ?
Any people interested in helping let me know.
Click to expand...
Click to collapse
I am interested in helping, I have the metropcs variant.
Latest up to date software. Due to that I have no root
LG Stylo 2 PLUS
TWRP no ROOT
cragains said:
I am interested in helping, I have the metropcs variant.
Latest up to date software. Due to that I have no root
LG Stylo 2 PLUS
TWRP no ROOT
Click to expand...
Click to collapse
You can downgrade your firmware .
Nice work let me know when the source is up at github , i may be able to help
I'm so anxious I can't wait to get my new PC! I will be compiling a lot faster. You guys are going to like this lineage OS port. Hang in there
Any screenshots?
I'm interested in this also
Pelegius22 said:
Any screenshots?
I'm interested in this also
Click to expand...
Click to collapse
Not at the moment I had the backlight on my display burn out . had to flash the stock rom back for warranty purposes and for some reason every time I try and back up via twrp the data gets corrupted.
So the only place I have a working Rom is stored on a hard drive and I get my PC back on the 6th this month so it will be up soon.
Twrp link
Rmontoya83 said:
You can downgrade your firmware .
Click to expand...
Click to collapse
No PC right now, I moved across the state, and left my PC.
Can't down grade
LG Stylo 2 PLUS
TWRP no ROOT
Got the new laptop up and running building starts tommorrow.
All souces are downloaded . I will start building the device tree tonight hopefully by end of week myself and @messi2050 will have a working lineage OS build for the ph2n. I stood up all night working on the list of proprietary files need for the build.
Now comes the hard work of adding all the required blobs to get it all functional please be patient. As we are doing this in out free time. Once the device tree is all setup it will be a lot easier to port other roms to this device such as omni aokp DU and so much more. I chose a 13 build as I'm new to this and its a lot easier to port a Rom that has many components that are stable with the version.
If you appreciate our work buy us a cup of coffee. Or hit the thanks button for the Devs working on this build .
Thanks to all the xda community.
We should work on a changelog concerning drivers for cheaper models like my tmousa k550.
(((Poll )))) custom kernel with more governors and overclock or stock kernel?
Rmontoya83 said:
(((Poll )))) custom kernel with more governors and overclock or stock kernel?
Click to expand...
Click to collapse
Custom kernel with more governors and overclock! Let me know if you need me to test, I have MetroPCS variant. Thank you also for your time and development for this amazing device!
Rmontoya83 said:
(((Poll )))) custom kernel with more governors and overclock or stock kernel?
Click to expand...
Click to collapse
Custom all the way.
I am sending this to you in hopes of curing my boredom...
Montoya, how are you getting the blobs? I have root when want it, I just don't right now. I have teamoctos synced, I have all the source code for our device. I'm not much of a programmer, but let me know I can help. I have Ubuntu with all the packages for compiling.
we need all the help we can get
Giminji said:
Montoya, how are you getting the blobs? I have root when want it, I just don't right now. I have teamoctos synced, I have all the source code for our device. I'm not much of a programmer, but let me know I can help. I have Ubuntu with all the packages for compiling.
Click to expand...
Click to collapse
@messi2050
has one repository done for device /device
i have the other kernel/
i am working on the blobs using @JackpotClavin utility tool to pull all the blobs needed for the build. once we have a stable tree we can work on building other roms.
Good news we have the the last branch to the tree built so builds will start this week sometime. We have a lot of work ahead still so be patient.
Tree source and blobs are on github.
https://github.com/RichieRich83
@messi2050
You rock brother.
Rmontoya83 said:
Good news we have the the last branch to the tree built so builds will start this week sometime. We have a lot of work ahead still so be patient.
Tree source and blobs are on github.
URL deleted I am too new.
@messi2050
You rock brother.
Click to expand...
Click to collapse
Both you and Messi are doing amazing things. When this is done, both of you are getting a cup of java (I couldn't resist Java instead of Joe or Coffee). I downloaded the jackpotcalvindonkey thing yesterday, did the make on it, but didn't get it out.
Btw, your github shows no public repos.
Well that was quick
Hi Lads,
Past few days im trying to add the ath9k module to a kernel.
I took the emotion kernel but when i started to make the kernel i constantly receiving errors.
I googled till my eyes burned out of my skull but got no solution. Probably im doing something wrong
Im looking for someone who can build the kernel easily including the ath9k driver.
My purpose is to use Kali Nethunter with the TP-Link WL722N adapter on the Note Edge N915F.
Im so desperate that i want to pay for it. Or maybe a game on steam :highfive:
Please help me out!
Greetings.
Stefjoe
Stefjoe,
I also saw your pm. I know now that you would like that module added to the tblte kernel. Kali Nethunter is not a rom, it is an overlay of sorts. Essentially a chrooted Linux distribution running over the top of your Android phone.
Kali only supports stock roms, or some "CyanogenMod variants", so I could add this to the AOKP kernel for you, but I cannot guarantee that you will have everything you need for this to work. For instance, you are going to need packet injection, module loading and unloading, force modules, etc., etc., much more than just the one item you requested. The note edge is not on the list of supported devices for a reason, it takes much dedication and effort to set it up properly. You would also need to build your custom port of Kali to go on your system. (Unless I am mistaken, no one has made one for the Note Edge yet.)
So, have you already built a working port of kali for your phone?
I say this in the kindest of regards, but if you cannot build the kernel, can you build the kali image?
As a side note, all the tools in Kali Linux are freely available, and you can download them to your phone right now, just not in the glorified package. Having Kali is like having a toolbox. Having a tool box does not make one a mechanic. Having Kali does not make one a pentester, or cacker (unethical hacker) if you are aiming for that.
I am not opposed to you having Kali, I've used it before myself (not on a phone), but in the end, I found Debian to be just as useful, downloading the tools that actually helped me in my job/tasks.
I am just curious if you have already created the kali image you need for the Note Edge phone. In theory, if the only thing you need is a kernel with the above, then it should work with your current kernel, just without that feature. If you have not even made the image yet, then I suspect that you are going to need a lot more than what you asked for.
I hope that makes sense.
AlaskaLinuxUser said:
Stefjoe,
I also saw your pm. I know now that you would like that module added to the tblte kernel. Kali Nethunter is not a rom, it is an overlay of sorts. Essentially a chrooted Linux distribution running over the top of your Android phone.
Kali only supports stock roms, or some "CyanogenMod variants", so I could add this to the AOKP kernel for you, but I cannot guarantee that you will have everything you need for this to work. For instance, you are going to need packet injection, module loading and unloading, force modules, etc., etc., much more than just the one item you requested. The note edge is not on the list of supported devices for a reason, it takes much dedication and effort to set it up properly. You would also need to build your custom port of Kali to go on your system. (Unless I am mistaken, no one has made one for the Note Edge yet.)
So, have you already built a working port of kali for your phone?
I say this in the kindest of regards, but if you cannot build the kernel, can you build the kali image?
As a side note, all the tools in Kali Linux are freely available, and you can download them to your phone right now, just not in the glorified package. Having Kali is like having a toolbox. Having a tool box does not make one a mechanic. Having Kali does not make one a pentester, or cacker (unethical hacker) if you are aiming for that.
I am not opposed to you having Kali, I've used it before myself (not on a phone), but in the end, I found Debian to be just as useful, downloading the tools that actually helped me in my job/tasks.
I am just curious if you have already created the kali image you need for the Note Edge phone. In theory, if the only thing you need is a kernel with the above, then it should work with your current kernel, just without that feature. If you have not even made the image yet, then I suspect that you are going to need a lot more than what you asked for.
I hope that makes sense.
Click to expand...
Click to collapse
Thanks for your reply again! I kinda ported the Nethunter to Note Edge with help from this video on YT ; /watch?v=jhLBJJwB88k
Everything works fine but only the TP-Link WL722N is not working because the kernel does not have this module installed. The adapter takes care of the injection so no worries i guess. I sended u a PM.
I am a certified hacker and i know what Kali Linux is but only missing this tool and it could make my work a lot easier. So i really appreciate if u can do this for me man. Endless thanking
Greetings
stefjoe said:
Thanks for your reply again! I kinda ported the Nethunter to Note Edge with help from this video on YT ; /watch?v=jhLBJJwB88k
Everything works fine but only the TP-Link WL722N is not working because the kernel does not have this module installed. The adapter takes care of the injection so no worries i guess. I sended u a PM.
I am a certified hacker and i know what Kali Linux is but only missing this tool and it could make my work a lot easier. So i really appreciate if u can do this for me man. Endless thanking
Greetings
Click to expand...
Click to collapse
Stefjoe,
I see from your PM that you are not requesting my AKLU kernel, but the TW Emotion Kernel. I can't do that for you.
To build the kernel you need the right source, the source code for the kernel has been updated since r17 ( I think it is r2X? now). That means rolling back through the commits to find the time it was built and working properly and getting that source. It is not as simple as just going straight back to r17, the r17 version you may be using may be anywhere in the commits between r17 and r18.
Then we would need the exact toolchain he/she was building with. He says Linaro 5.1, but which one, 5.1, 5.1.1, 5.1.8? There are several.
Also, I do not build TW kernels. I only build AOSP kernels. I also don't usually build off of someone else's work. I was under the impression you wanted me to add that module to my AKLU kernel instead.
To get that specific kernel built the way you want, I recommend that you ask @Pafcholini to do that for you, since he made it originally.
If you want, I can add that module to my AKLU kernel for you, but I know the rest of the needed kernel items are in there that you need (packet injecting, force module loading, etc.) so I doubt it will work for you. You would also have to switch to AOKP, which may or may not work with your porting guide.
Sorry, but after looking at your full request, I don't think I can help you with what you need.
Hi, I'm completely new in Android ROM development and want to get into it. I have a Moto G Turbo and a old Moto E 1st gen.
So I had some question regarding Android ROM development. I may sound completely noob which I am, but still if you help me by answering my question or at least referring to some links then I'll be helpful. And please only answer if you are confident about what you are saying.
1> I understand that Android is open source, so basically we can download and build it. What does it take to make that boot on a particular device?
2> Android is based on linux kernel. So we need a kernel source too. I found this, https://github.com/MotorolaMobilityLLC/kernel-msm, is this the kernel source for moto devices? I am confused because I can find only one repository although it must different repositories for different devices.
3> If we have a kernel source for the device, can we build any ROM like AOSP or AOSP-CAF and boot it in our device? If not why?
3> I have a good knowledge of C although I am still learning. How do I start developing or porting ROM? I am specially interested in PURE AOSP.
I don’t know but you might find a lot of tutorials in non-device-specific threads. And I think there’s a guide on how to build lineage 13 for osprey
This thread could be helpful:
https://forum.xda-developers.com/showthread.php?t=2073370&page=1
Hi Folks,
I'm trying to port B2G to my moto g3. I was referring to this doc (https://developer.mozilla.org/en-US/docs/Archive/B2G_OS/Porting_B2G_OS/basics). However some of the things mentioned in this doc are not clear to me. Could you please help me with the below issue.
I'd like to build the AndroidKernel from source. So where should I include the below lines? Is it in this file?
https://github.com/LineageOS/android_device_motorola_osprey/blob/cm-14.1/rootdir/etc/init.target.rc
HTML:
on early-init
start ueventd
import /init.b2g.rc
Also if I understood correctly. building the kernel from source doesn't require to unpack , edit the init.rc file and repack the kernel from the device. Could you please confirm this?
Thanks,
Arun
Hi Arun,
I totally understand your frustration with this. You'd like to contribute to the Servonk project but first you need to port B2G to your phone or buy a new phone. Since the only other supported phones are the Z3 compact and Nexus 5, both of which are still relatively expensive secondhand, you want to use your Moto G3 which means first porting B2G to it.
So, I think there are two options you have:
1. Port direct from the AOSP code
2. Port from the CM12 code.
As Gerard said in telegram, porting from CM to B2G was never finalised so may actually require more work. However there may actually be more people here who can help you since people seem more familiar with CM than AOSP (in general, I know some people are very knowledgeable in both).
I see you've posted in the AOSP 7.1.1 kernel thread. Unfortunately, for the Servonk project you currently need a Lollipop based build, so 5.x AOSP kernel or CM12.x.
It might be worth asking a mod to move this thread into one of the development sub-forums.
As you know, this is the limit of my knowledge, but I really hope you find some success, if would be great if you could contribute to the Servonk project.
Your last option is to use the desktop build of Servonk, based on Glutin instead of Gonk, but I understand that you really want to get Servonk working on your phone.
Best of luck