TWRP 2.8.7.1 not work - Xiaomi Mi 4C

I have install the latest TWRP 2.8.7.1 but whene i boot in the Recovery i have touch issus and nothing work. What can i do?

Wait 2 minutes and it will respond.

I am back to 2.8.7.0 and work better.

but for me 2.8.7.0 variants did not have OTG working.... :-/

Probably you can try this TWRP http://en.miui.com/thread-169401-1-1.html as it solved the touch screen issue.

grant_ said:
Wait 2 minutes and it will respond.
Click to expand...
Click to collapse
yup, i can confirm that.

Related

problem whit charger ----> boot in recovery

i turn off the phone, i connect it to the charger and after few seconds it boots to recovery without touching anything... any solution ????
i'm on MIUI 2.7.27 on stock kernel.
This happens to people sometimes, CWM recovery?
frdd said:
This happens to people sometimes, CWM recovery?
Click to expand...
Click to collapse
yes...the latest one... so it's a recovery problem???
EDIT: i can confirm... i changed the CWM whit the TWRP and now works good

Unable to Boot from Recovery

so i just flashed 2.8.7.0 with flashify (probably my culprit) at work ... no way to a usb cable/cannot hook phone to a work PC (gov)
now phone boots into bootloader, power down and recovery only, i can perform functions within recovery, but everytime i reboot it goes to recovery
anyone have any ideas? Im dead in the water now
-4ndr01d- said:
so i just flashed 2.8.7.0 with flashify (probably my culprit) at work ... no way to a usb cable/cannot hook phone to a work PC (gov)
now phone boots into bootloader, power down and recovery only, i can perform functions within recovery, but everytime i reboot it goes to recovery
anyone have any ideas? Im dead in the water now
Click to expand...
Click to collapse
I don't see a 2.8.7.0 on the TWRP site.
I do however see a 2.8.5.0
are you sure you are using the correct one?
their could be a M8 2.8.7.0 I just can't find it.
EDIT: nvm sorry, I see it now here:
http://forum.xda-developers.com/showthread.php?t=2717928
Wish I could be of help, sorry friend.
I fixed myslef. luckily I had a few versions of the kernel i was runnning. so i flashed one of those and everything worked fine.
Im sure its flashify's fault. seems like it flashed to both the boot and recovery partition
need to stay away from apps to flash recovery lol. just use fastboot
-4ndr01d- said:
I fixed myslef. luckily I had a few versions of the kernel i was runnning. so i flashed one of those and everything worked fine.
Im sure its flashify's fault. seems like it flashed to both the boot and recovery partition
need to stay away from apps to flash recovery lol. just use fastboot
Click to expand...
Click to collapse
Glad you got it fixed!
I agree, I only use fastboot when it comes to things such as recovery

TWRP alternative?

So here is what I am stuck:
I have a SM-G9208 international edition. I have been working around and finally managed to get TWRP flashed using ODIN and boot into recovery. the problem is that the touch screen does not work for some reason.
So I am looking for a recovery that does not require touch screen. I was hoping to find a recovery that I can flash through ODIN and only uses physical buttons. Does any know where I can find such a thing?
Hey mate. I was searching for Philz for some time - go for it http://arter97.com/browse/exynos7420/kernel/4.3/. This guy has it for probably all models. And buttons are apparently working.
On the other hand you flashed the correct TWRP?
davebugyi said:
On the other hand you flashed the correct TWRP?
Click to expand...
Click to collapse
How many versions of TWRP exists? I only found one version on the official website:
https://dl.twrp.me/zeroflte/
the last file (twrp-2.8.7.1-zeroflte.img.tar) is the one that actually successfully boots into recovery but after that no-touch problem exists. the rest do not work.
Saafir said:
Could try OTG cable with a mouse.
Click to expand...
Click to collapse
I never thought of that. Does TWRP support mouse out of the box or special build of TWRP is needed?
Saafir said:
Yep, TWRP supports it. Should be fine. Had to do it on a G2 with a broke screen
Click to expand...
Click to collapse
It indeed worked. now I can actually do things in TWRP using USB OTG mouse. But there is a new problem: once I use mouse in TWRP, the phone gets stuck in a boot loop after I exit TWRP The only fix is to flash the full image using ODIN
For whoever that may come across this:
TWRP does allow you to work through adb command shell. boot into recovery, attach to your laptop and do:
adb devices
once you get a response do:
adb shell
and then you can do all kind of stuff like:
twrp install filename
twrp backup
twrp restore
I have the same problem but instead like a dumb ass I installed twrp twice and it messed up my screen each time I touch to the right it touches to the left and left is right. So does anybody have a costum recovery or a stock recovery for SM-G920T1 or SM-G920T

Recovery bootloop

URGENTAfter rooting my Xperia L(C2105) via flashtool, I installed TWRP 2.8.5.0 (also via flashtool) and I am facing the following issue:
Can't reboot into system/Recovery/Flashmode
The screen keeps rebooting after 10 seconds with the TWRP logo and my PC can't detect it.
What should i do? Is there anyway i can fix it?
//ANY SORT OF HELP WILL BE APPRECIATED, I AM A BIT NEW TO THIS STUFF
Pakora420 said:
URGENTAfter rooting my Xperia L(C2105) via flashtool, I installed TWRP 2.8.5.0 (also via flashtool) and I am facing the following issue:
Can't reboot into system/Recovery/Flashmode
The screen keeps rebooting after 10 seconds with the TWRP logo and my PC can't detect it.
What should i do? Is there anyway i can fix it?
//ANY SORT OF HELP WILL BE APPRECIATED, I AM A BIT NEW TO THIS STUFF
Click to expand...
Click to collapse
Flash the stock rom with flashtool...... Then the root and the recovery will be done by another way...
Pakora420 said:
URGENTAfter rooting my Xperia L(C2105) via flashtool, I installed TWRP 2.8.5.0 (also via flashtool) and I am facing the following issue:
Can't reboot into system/Recovery/Flashmode
The screen keeps rebooting after 10 seconds with the TWRP logo and my PC can't detect it.
What should i do? Is there anyway i can fix it?
//ANY SORT OF HELP WILL BE APPRECIATED, I AM A BIT NEW TO THIS STUFF
Click to expand...
Click to collapse
the TWRP 2.8.5 is not suitable with the stock rom
So as Muhammad said flash the stock ROM and go here for suitable recoveries
http://forum.xda-developers.com/xperia-l/orig-development/cwm-recovery-installer-t2589320
n78 shadow said:
the TWRP 2.8.5 is not suitable with the stock rom
So as Muhammad said flash the stock ROM and go here for suitable recoveries
http://forum.xda-developers.com/xperia-l/orig-development/cwm-recovery-installer-t2589320
Click to expand...
Click to collapse
Found out the issue:
After taking out the battery, I placed it back and waited for 5 seconds and then entered fastboot and it worked. In short "HUMAN ERROR", thanks anyway :3
Pakora420 said:
Found out the issue:
After taking out the battery, I placed it back and waited for 5 seconds and then entered fastboot and it worked. In short "HUMAN ERROR", thanks anyway :3
Click to expand...
Click to collapse
Which version of TWRP??
n78 shadow said:
Which version of TWRP??
Click to expand...
Click to collapse
It was Philz recovery, afterwards i flashed the latest TWRP through Recovery Installer
Pakora420 said:
It was Philz recovery, afterwards i flashed the latest TWRP through Recovery Installer
Click to expand...
Click to collapse
Lol:silly:
n78 shadow said:
Lol:silly:
Click to expand...
Click to collapse
:3

[Q] Can't access recovery from bootloader/fastboot

If I try to select Recovery mode from bootloader/fastboot phone bootloops for couple times before starting android normally.
Only way for me to access twrp-recovery is
adb reboot recovery
Click to expand...
Click to collapse
Have you tried re-flashing TWRP? Might be worth a try...
re-flashed everything from recovery to bootloader, no change
The_Chosen_One said:
re-flashed everything from recovery to bootloader, no change
Click to expand...
Click to collapse
Try with 3.0.2.0 version, for example
Stevica Smederevac said:
Try with 3.0.2.0 version, for example
Click to expand...
Click to collapse
I don't know why or how but it works. not 100% of the time, but those instances seems to go away after rebooting bootloader
Thank you
In my experience, it seems to be checking for button presses...
If I start mashing all 3 buttons at the same time, recovery almost always starts

Categories

Resources