My phone is rooted. I have CM recovery installed. I am trying to flash a ROM but the installation is failing at 47%. It shows this message "Detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and restarts the phone. When I try to wipe data or wipe media from recovery it restarts the phone. Even if I try to install from emulated storage it restarts the phone. I think there is something wrong with the storage. Can anyone help?
Karthikprabhu22 said:
My phone is rooted. I have CM recovery installed. I am trying to flash a ROM but the installation is failing at 47%. It shows this message "Detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and restarts the phone. When I try to wipe data or wipe media from recovery it restarts the phone. Even if I try to install from emulated storage it restarts the phone. I think there is something wrong with the storage. Can anyone help?
Click to expand...
Click to collapse
Hi, are you on latest version of CWM corresponding to your phone model ? (let us know what phone model too )
Have you tried to flash and try with TWRP's latest version for your model ? (what's model, once again...)
What rom are you trying to flash (brand and build) ? Is your bootloader up to date ?
Not easy to help you without some precise informations...
satanas17 said:
Hi, are you on the latest version of CWM corresponding to your phone model? (let us know what phone model too )
Have you tried to flash and try with TWRP's latest version for your model? (what's model, once again...)
What ROM are you trying to flash (brand and build)? Is your bootloader up to date?
Not easy to help you without some precise information...
Click to expand...
Click to collapse
I had TWRP earlier. But it suddenly stopped working. I tried to reflash it didn't work. Then I tried CWM which was flashed successfully but was freezing. Currently, I have the latest recovery by CyanogenMod. It works fine.
My phone is Moto G XT-1033 (falcon).
I haven't updated my bootloader. I will try doing it.
Thank you
I am facing same problem in twrp recovery but now everything working fine after flashing stock recovery and twrp again
Tjsdj said:
I am facing same problem in twrp recovery but now everything working fine after flashing stock recovery and twrp again
Click to expand...
Click to collapse
:good:
Related
Hello,
Just had issue with my Samsung galaxy S3.
A lot of sudden death and device freezes.
I installed the "[ROM][364MB][NB7]Revolutionary S5 V2 - Like your new Galaxy S5? [23RD MAR][FLYING][AVAILABLE]"
rom and since then i cannot boot my device.
After the installation was finished and just click the reboot option and its stucked on the boot screen(Samsung Galaxy s3 image)
Is it what's called a brick?
Is there any way to fix that issue?
I know i can get into recovery.
I'm having trouble with the sd card, I guess it's related cause it was working well before having issue with the device.
Any suggestion from you guys?
chenazran said:
Hello,
Just had issue with my Samsung galaxy S3.
A lot of sudden death and device freezes.
I installed the "[ROM][364MB][NB7]Revolutionary S5 V2 - Like your new Galaxy S5? [23RD MAR][FLYING][AVAILABLE]"
rom and since then i cannot boot my device.
After the installation was finished and just click the reboot option and its stucked on the boot screen(Samsung Galaxy s3 image)
Is it what's called a brick?
Is there any way to fix that issue?
I know i can get into recovery.
I'm having trouble with the sd card, I guess it's related cause it was working well before having issue with the device.
Any suggestion from you guys?
Click to expand...
Click to collapse
Recovery + downloa mode working ??
LS.xD said:
Recovery + downloa mode working ??
Click to expand...
Click to collapse
Yes sir.
I'm just trying to play with the adb tool and install a different rom, no result yet.
Do you know another way?
chenazran said:
Yes sir.
I'm just trying to play with the adb tool and install a different rom, no result yet.
Do you know another way?
Click to expand...
Click to collapse
Sure. You don't need adb for installing a rom!
Perform a wipe
copy CUSTOMROM.zip* to your sdcard
install it via recovery
be happy again
*you can choose any custom rom compatible to your device.
The sd card is curropted for some reason.
I try the ADB but get the error attached.
Any reason what's wrong?
Or how can I fix this issue?
chenazran said:
The sd card is curropted for some reason.
I try the ADB but get the error attached.
Any reason what's wrong?
Or how can I fix this issue?
Click to expand...
Click to collapse
Don't use adb sideload pls. Just go to recovery --> format sd-card --> mount sd to computer --> copy rom.zip to sdcard manually. You dont need adb sideload
I format the external_sd
I mount the external_sd but can get the drive in my local machine.
do you i need to do something in addition to get the drive in my pc?
What Recovery Version do you use actually?
]Do You have the SIII gt-i9300?
If you have unbranded SIII GT-i9300 --> This is the best recovery avaiable PhilZ advanced cwm 6.19.3 . You can flash it using Odin 3.07
Latest usb drivers --> Samsung USB drivers
Your solution is good.
I installed this recovery and managed to mount my sd card and then install a different rom.
Thing I still have the sudden death issue.
I understood that any rom with version of 4.1.2 and above has that relevant fixes but its just didn't solve my issue.
Any suggestion about that?
chenazran said:
Your solution is good.
I installed this recovery and managed to mount my sd card and then install a different rom.
Thing I still have the sudden death issue.
I understood that any rom with version of 4.1.2 and above has that relevant fixes but its just didn't solve my issue.
Any suggestion about that?
Click to expand...
Click to collapse
Have you flashed full stock firmware once you're sd card is fine again?
I installed a custom ROM(Archdroid v2.4) and in the installation i chose the stock kernel.
Is that enough?
Model: GT-I9300
Android version: 4.4.2
XXELLA
chenazran said:
Hello,
Just had issue with my Samsung galaxy S3.
A lot of sudden death and device freezes.
I installed the "[ROM][364MB][NB7]Revolutionary S5 V2 - Like your new Galaxy S5? [23RD MAR][FLYING][AVAILABLE]"
rom and since then i cannot boot my device.
After the installation was finished and just click the reboot option and its stucked on the boot screen(Samsung Galaxy s3 image)
Is it what's called a brick?
Is there any way to fix that issue?
I know i can get into recovery.
I'm having trouble with the sd card, I guess it's related cause it was working well before having issue with the device.
Any suggestion from you guys?
Click to expand...
Click to collapse
Do you have custom recovery ? if you have so then do a complete wipe (cache,factory data, dalvik) and try, if the device doesnt boot then flash your backup or stock rom in recovery
I installed a custom ROM based on stock and it reduced the freezes and sudden death big time but didn't solve it.
since the installation one day ago i had a couple of sudden deaths.
I did all wipes the recovery have to offer but I still see picture and old data I had.
No way to format the entire phone and then install a ROM from recovery?
Any other suggestion how to fix?
chenazran said:
I installed a custom ROM based on stock and it reduced the freezes and sudden death big time but didn't solve it.
since the installation one day ago i had a couple of sudden deaths.
I did all wipes the recovery have to offer but I still see picture and old data I had.
No way to format the entire phone and then install a ROM from recovery?
Any other suggestion how to fix?
Click to expand...
Click to collapse
You can format everything using PhilZ recovery:
-->Mounts&Storage
Format /system /cache /data /storage/sdcard0 /storage/sdcard1
Then copy the rom to your sdcard and install it again. If that does not work you will have to flash the stock firmware once using odin before you can use a custom rom again.
Keep in mind that a custom kernel can cause system instability and errors.
LS.xD said:
You can format everything using PhilZ recovery:
-->Mounts&Storage
Format /system /cache /data /storage/sdcard0 /storage/sdcard1
Then copy the rom to your sdcard and install it again. If that does not work you will have to flash the stock firmware once using odin before you can use a custom rom again.
Keep in mind that a custom kernel can cause system instability and errors.
Click to expand...
Click to collapse
"stock firmware once using odin"
I want to try that.
Format the whole phone and install stock firmware.
Where can I download that?
chenazran said:
"stock firmware once using odin"
I want to try that.
Format the whole phone and install stock firmware.
Where can I download that?
Click to expand...
Click to collapse
XXELLA = T-Mobile Austria
If that is correct you will need this Firmware
Keep in mind that its Android 4.12 so please perform a EFS backup using KTool
chenazran said:
Hello,
Just had issue with my Samsung galaxy S3.
A lot of sudden death and device freezes.
I installed the "[ROM][364MB][NB7]Revolutionary S5 V2 - Like your new Galaxy S5? [23RD MAR][FLYING][AVAILABLE]"
rom and since then i cannot boot my device.
After the installation was finished and just click the reboot option and its stucked on the boot screen(Samsung Galaxy s3 image)
Is it what's called a brick?
Is there any way to fix that issue?
I know i can get into recovery.
I'm having trouble with the sd card, I guess it's related cause it was working well before having issue with the device.
Any suggestion from you guys?
Click to expand...
Click to collapse
I think you havent cleared data/factory reset your phone from cwm or twrp or else..
u need to do that + clear dalvik cache before flashing the zip..
But about the ROM u mentioned, is it really made for Samsung S3 ? :/
Vaibhav4166 said:
I think you havent cleared data/factory reset your phone from cwm or twrp or else..
u need to do that + clear dalvik cache before flashing the zip..
But about the ROM u mentioned, is it really made for Samsung S3 ? :/
Click to expand...
Click to collapse
Yes its a rom for SIII GT-i9300 LOL
LS.xD said:
XXELLA = T-Mobile Austria
If that is correct you will need this Firmware
Keep in mind that its Android 4.12 so please perform a EFS backup using KTool
Click to expand...
Click to collapse
"XXELLA = T-Mobile Austria"
Didnt know that one.
I will download what's relevant for my country according to the site you provided and install.
It's only a KERNEL stock, right?
I can leave my current custom rom and just flash the official stock kernel ?
chenazran said:
I installed a custom ROM(Archdroid v2.4) and in the installation i chose the stock kernel.
Is that enough?
Model: GT-I9300
Android version: 4.4.2
XXELLA
Click to expand...
Click to collapse
You posted XXELLA before...
Its a FULL FIRMWARE. Will setup complete phone. !!! Backup personal data if you need something!!!
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
I_HAVE_NO_IDEA said:
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
Click to expand...
Click to collapse
Well if you can boot into the recovery and if its custom (TWRP) wipe all the data on your phone. Second I would try to flash a ROM onto your device such as Resurrection Remix and see if that works. Update on your progress.
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
I_HAVE_NO_IDEA said:
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
Click to expand...
Click to collapse
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
vtails said:
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
Click to expand...
Click to collapse
Thank you. But I can't flash a cm12.1 atm (see my post below). I can only flash through fastboot. I'm not sure I properly understood you, what do you call 4 22 ?
FYI I managed to boot again. Here's what I did:
Flash a 5.x ROM, try to boot to let the system make partitions and stuff (I think)
Boot in TWRP and saw that system and cache were not mountable, so I wiped them.
Flash a cm12.1 (+ Gapps) and here we go!
Thank you for your help!
Hello,
I have recently been trying to flash and try out Android MM on my xt1031. A problem I face is a series of reboots upon the ending of OS boot, while the first time it happens on one of those "updating contacts storage" after "optimization of apps". I'd like to know what would be the cause of this or how I can find it (idk how to record a logcat while booting) since I haven't heard of it around here. I have tried with several ROMs and tried without gapps, leading to the same result. Any nudge would be well appreciated.
Flash a proper TWRP for Marshmallow, then wipe all before flashing custom rom.
ong14 said:
Flash a proper TWRP for Marshmallow, then wipe all before flashing custom rom.
Click to expand...
Click to collapse
I do. I'm flashing the one located here: forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621 . Thr one I used is twrp 2.8.7.0 falcon M stocl no theme.img. Am I using one incompatible with my phone?
I flashed latest CM 13 nightly (cm-13.0-20160910-NIGHTLY-falcon.zip) and facing some issues: (Moto g xt1033 Cm13)
1. Simcard is not detecting.
2. Whenever i try to call it just reboots.
It is showing me IMEI number so, thats mean simcard is working....
and other things that i think can be problem:
I have bricked my phone and recovered by using this thread http://forum.xda-developers.com/moto...oto-g-t2833798.
whenever i try to flash stock firmware it just reboots to recovery everytime (tried all android version of stock).
Only cm13 able to boot successfully and above mentioned problems occurs.....
PLEASE HELP ME AS THIS IS MY PRIMARY DEVICE......
Thank you so much.......
iHackIt said:
I flashed latest CM 13 nightly (cm-13.0-20160910-NIGHTLY-falcon.zip) and facing some issues: (Moto g xt1033 Cm13)
1. Simcard is not detecting.
2. Whenever i try to call it just reboots.
It is showing me IMEI number so, thats mean simcard is working....
and other things that i think can be problem:
I have bricked my phone and recovered by using this thread http://forum.xda-developers.com/moto...oto-g-t2833798.
whenever i try to flash stock firmware it just reboots to recovery everytime (tried all android version of stock).
Only cm13 able to boot successfully and above mentioned problems occurs.....
PLEASE HELP ME AS THIS IS MY PRIMARY DEVICE......
Thank you so much.......
Click to expand...
Click to collapse
1. Firstly Bro calm down and have some patience while installing ROM's.
2. You have to totally reset your device back to stock. Factory reset it and wipe all data incl.system,apps caches.
3. Download stock rom "untouched version" 5.0.1 from this link http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 according to your devices' model. (P.S. remember to thank him.)
4. Restart your phone in fastboot mode by pressing pwr+vol down button together for 10 secs. and flash evrything using fastboot...evrything incl the recovery.
5. Your device must be booted to stock now.
6. Root it again flash recovery,flash a custom rom..and enjoy.
Note: If the device is your primary device,take a lot of backup's before hand and be cautious and read forums before flashing a new ROM. :laugh:
karanksj said:
1. Firstly Bro calm down and have some patience while installing ROM's.
2. You have to totally reset your device back to stock. Factory reset it and wipe all data incl.system,apps caches.
3. Download stock rom "untouched version" 5.0.1 from this link http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 according to your devices' model. (P.S. remember to thank him.)
4. Restart your phone in fastboot mode by pressing pwr+vol down button together for 10 secs. and flash evrything using fastboot...evrything incl the recovery.
5. Your device must be booted to stock now.
6. Root it again flash recovery,flash a custom rom..and enjoy.
Note: If the device is your primary device,take a lot of backup's before hand and be cautious and read forums before flashing a new ROM. :laugh:
Click to expand...
Click to collapse
Yes i have flashed all the files step by step the untouched version of android 5.1. While flashing there was no error in flashing.
after flashing stock rom mu device always reboots to the recovery. (i also wiped all partitions before flashing.
Thank you for reply.
iHackIt said:
Yes i have flashed all the files step by step the untouched version of android 5.1. While flashing there was no error in flashing.
after flashing stock rom mu device always reboots to the recovery. (i also wiped all partitions before flashing.
Thank you for reply.
Click to expand...
Click to collapse
I quoted 5.0.1 not 5.1 brother It worked for me every time.
karanksj said:
I quoted 5.0.1 not 5.1 brother It worked for me every time.
Click to expand...
Click to collapse
Sorry for misreading...:silly:
I cant flash 5.0.1, 4.4.2,4.4.4
When i try to flash it gives errors and warnings (only 5.1 works )
i will share errors...
works in the sense it was flashed perfectly but it also boots to the recovery everytime like CM13
My bootloader version is 41.1A..
J710F/non-NFC/Enigma v6/A520FN PORT/SuperSU Root/6.0.1
.
After updating to Android 7 (UAE Framework) from Android 6.0.1 Enigma v6 via Odin my Touch Stopped Working just couldn't pass Welcome screen. So I Installed TWRP and My TOUCH was fine there
Then Flash MM Stock via Odin (Indian CSC) again and Touch was again working Great Thn Again OTA to N 7 but once again My TOUCH stopped just like that. Used Sometime with OTG mouse OS was Fast and Smooth.
Again TWRP Wiped couple of times in between all
Restore to my TWRP BACKUP Enigma Fine Everything
Thn I flashed a moded N (SuperNova N v0.1) but Same again No Touch in OS but TWRP have Touch Working
Now I wipe flashed SuperNova 4 and My TOUCH is fine but when I Boot Nougat This happens
I want
Solution, Nougat And My TOUCH working :crying:
If you update to Nougat using the stock firmware you must ensure that after flashing it auto reboots to recovery to complete the update.
ashyx said:
If you update to Nougat using the stock firmware you must ensure that after flashing it auto reboots to recovery to complete the update.
Click to expand...
Click to collapse
It's a Problem with my boot.img i used a Nougat (Nemesis v3) ROM and old boot.img i got touch back but now i don't have second SIM which i can bare then Living without TOUCH
And I Don't know about stock. I Booted into Stock recovery and wiped data several times but same that happened
And i don't to how to compare boot.img to find the exact problem
qounik said:
It's a Problem with my boot.img i used a Nougat (Nemesis v3) ROM and old boot.img i got touch back but now i don't have second SIM which i can bare then Living without TOUCH
And I Don't know about stock. I Booted into Stock recovery and wiped data several times but same that happened
And i don't to how to compare boot.img to find the exact problem
Click to expand...
Click to collapse
Flash the stock firmware and ensure it auto reboots into recovery and completes the update.
You can't just mix and match firmware and expect it to work properly.
ashyx said:
Flash the stock firmware and ensure it auto reboots into recovery and completes the update.
You can't just mix and match firmware and expect it to work properly.
Click to expand...
Click to collapse
Fortunately it is working :good::angel:
That's right
What can i do if "tsp fw update fail"
ashyx said:
Flash the stock firmware and ensure it auto reboots into recovery and completes the update.
You can't just mix and match firmware and expect it to work properly.
Click to expand...
Click to collapse
Just did those again but results are the same and i tried dialing *#2663# and update the touch FW by pressing "TSP FW update (General)" but it says Fail to update: FAIL
Solution
I am stucked on the Welcome Screen too... I tried factory resetting, wiping cache... but doing those gives error E:// cannot find \misc partition... I tried flashing another firmware via ODIN too, but FRP lock is on and I cannot flash anything.. not even TWRP... what should I do?
Galaxy J727P
qounik said:
J710F/non-NFC/Enigma v6/A520FN PORT/SuperSU Root/6.0.1
.
After updating to Android 7 (UAE Framework) from Android 6.0.1 Enigma v6 via Odin my Touch Stopped Working just couldn't pass Welcome screen. So I Installed TWRP and My TOUCH was fine there
Then Flash MM Stock via Odin (Indian CSC) again and Touch was again working Great Thn Again OTA to N 7 but once again My TOUCH stopped just like that. Used Sometime with OTG mouse OS was Fast and Smooth.
Again TWRP Wiped couple of times in between all
Restore to my TWRP BACKUP Enigma Fine Everything
Thn I flashed a moded N (SuperNova N v0.1) but Same again No Touch in OS but TWRP have Touch Working
Now I wipe flashed SuperNova 4 and My TOUCH is fine but when I Boot Nougat This happens
I want
Solution, Nougat And My TOUCH working :crying:
Click to expand...
Click to collapse
I'm shore you tried installing stock 7.0 firmware with Odin ! Right !
amageek said:
I am stucked on the Welcome Screen too... I tried factory resetting, wiping cache... but doing those gives error E:// cannot find \misc partition... I tried flashing another firmware via ODIN too, but FRP lock is on and I cannot flash anything.. not even TWRP... what should I do?
Click to expand...
Click to collapse
Try flashing this boot https://drive.google.com/file/d/1_Vi9tUFQnkS7dEosgMKCNf9Mzs40MNs5/view?usp=drivesdk
Open TWRP Goto restore and select this boot
But Make Sure you are J710F or FN
peter couniaz said:
I'm shore you tried installing stock 7.0 firmware with Odin ! Right !
Click to expand...
Click to collapse
I tried installing everything
qounik said:
Try flashing this boot https://drive.google.com/file/d/1_Vi9tUFQnkS7dEosgMKCNf9Mzs40MNs5/view?usp=drivesdk
Open TWRP Goto restore and select this boot
But Make Sure you are J710F or FN
Click to expand...
Click to collapse
Dude, I don't have TWRP... I cannot install anything.... is it because of FRP lock? any way to remove it by adb or any other method?
Also, I get error saying E://cannot find \misc partition
Goto Stock recovery clear data/Factory reset
thn
You must get the right and latest bootloader from sammobile or such and flash it via odin
thn after reboot to recovery, wipe userdata, wipe cache, mount system and format. reboot to normal mode, reset setting factory from setting, reboot and should fix it Hopefully
Once i got FRP lock bcoz i flashed old bootloader and its a totally different problem thn my touch problem :3