Hi,
I would like to know if there is a knox resetting bootloader for Samsung Galaxy S5 Duos,
like for the Samsung Galaxy Note 3? I've read that there is a way to reset the knox from 0x1 to 0x0 for Samsung Galaxy Note 3 in this post :http://forum.xda-developers.com/showthread.php?p=52329946#post52329946 with a bootloader,so I was wondering If there is a knox resetting bootloader for the Galaxy S5 Duos (SM-
G900FD)?
And is this protocol for resetting the knox from this site : http://mobilexbi.blogspot.mk/2015/02/reset-knox-counter-any-samsung-device.html?m=1 true ???
Thanks in advance!
Best regards!
You cant reset Knox
Knox is not a file.It's A HARDWARE.It's A FUSE.When the phone detects bootloader that is not from the factory, it sends high current through the part and makes it fry.That's why the phone is hot when you install custom stuff on it.Samsung service is just replacing that part when you go to store and resets everything. Sorry mate :crying:
Hello, sorry bro, but you cant reset knox. Yes its fuse which can not be replaced, only replace motherboard. However if its big problem, does exist very simple aplication which paste patch to system, like system with 0x0 knox, but you need root
Related
Hello guys. Just a short but very important question. I'll root my S7 Edge incl. TWRP. I've made some experience in past with rooting, customizing and so on... In almost every case I noticed performance issues. In past I tried do flash the stock firmwares to get it to the original back again, but I didn't get any offcial updates about OTA. Its my first Samsung smartphone and I read there is a problem with Knox (security system for customization).
So: If I root and so on, is there any REAL solution to get it in the current untouched original state back incl. the untouched Knox status? (can I completely backup the current firmware and data so that have in case of issue just to flash it back?)
Hope you understand my thoughts
Metero said:
Hello guys. Just a short but very important question. I'll root my S7 Edge incl. TWRP. I've made some experience in past with rooting, customizing and so on... In almost every case I noticed performance issues. In past I tried do flash the stock firmwares to get it to the original back again, but I didn't get any offcial updates about OTA. Its my first Samsung smartphone and I read there is a problem with Knox (security system for customization).
So: If I root and so on, is there any REAL solution to get it in the current untouched original state back incl. the untouched Knox status? (can I completely backup the current firmware and data so that have in case of issue just to flash it back?)
Hope you understand my thoughts
Click to expand...
Click to collapse
Hi
Untouched firmware ...yes . just reflash a stock firmware
Reset knox back to 0 x 0 ......not possible , at least not at the moment
MAX 404 said:
Hi
Untouched firmware ...yes . just reflash a stock firmware
Reset knox back to 0 x 0 ......not possible , at least not at the moment
Click to expand...
Click to collapse
thank you. so it could be possible in future to set an almost changed knox value to 0x0? or just to prevent any change of the knox?
just another thought about bypassing knox... if it would be possible wouldn't it be a >big< security problem for samsung payment? not just for the costumer but for the seller?
what is actually the best method of rooting? is threre any difference? i found the CF auto root and the TWRP method (rooting after flashing the recovery). Just the difference between recovery or not?
Metero said:
thank you. so it could be possible in future to set an almost changed knox value to 0x0? or just to prevent any change of the knox?
just another thought about bypassing knox... if it would be possible wouldn't it be a >big< security problem for samsung payment? not just for the costumer but for the seller?
Click to expand...
Click to collapse
Hi
Bypass knox bit setting to one , has been possible in older models and there been some progress and success in the S7 family but resetting it back to 0 never been possible
The e fuse 0 x 1 is not a security issue at all is just a way for Samsung to know you been messing with the device , you can reflash a stock firmware (odin) , have the knox bit set and be 1000% safe and knox security cover...
MAX 404 said:
Hi
Bypass knox bit setting to one , has been possible in older models and there been some progress and success in the S7 family but resetting it back to 0 never been possible
The e fuse 0 x 1 is not a security issue at all is just a way for Samsung to know you been messing with the device , you can reflash a stock firmware (odin) , have the knox bit set and be 1000% safe and knox security cover...
Click to expand...
Click to collapse
yea for sure. but when you could costumize the software and the knox wouldn't change, samsung payment would be fully functional, you know? or doesn't it matter for samsung payment, if you change the knox value or not?
Metero said:
yea for sure. but when you could costumize the software and the knox wouldn't change, samsung payment would be fully functional, you know? or doesn't it matter for samsung payment, if you change the knox value or not?
Click to expand...
Click to collapse
Samsung payment or knox does not care about the e fuse ( 0x 1 ) state , it cares about the integrity of the firmware installed , for example if stock firmware is flashed knox will see the system as original regardless of the e fuse state
MAX 404 said:
Samsung payment or knox does not care about the e fuse ( 0x 1 ) state , it cares about the integrity of the firmware installed , for example if stock firmware is flashed knox will see the system as original regardless of the e fuse state
Click to expand...
Click to collapse
That goes against everything I've seen about Samsung Pay (or even Knox). Once you've tripped it (0x1) there's no way to get it back. Samsung Pay will not work even if you re-flash stock (unrooted) rom.
Sent from my SM-G930W8 using Tapatalk
Devhux said:
That goes against everything I've seen about Samsung Pay (or even Knox). Once you've tripped it (0x1) there's no way to get it back. Samsung Pay will not work even if you re-flash stock (unrooted) rom.
Sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
Hi
my bad you are right , knox tripped no samsung pay
How guys
I bought a new galaxy j7 2016 a few days ago
I am a root user and I cannot stay without root. But I found out that Samsung has a Knox counter which will get triggered if I try to root or do anything like it And it will void My warenty
So How will I reset my Knox counter after I riot??:crying:
PolockOniat said:
How guys
I bought a new galaxy j7 2016 a few days ago
I am a root user and I cannot stay without root. But I found out that Samsung has a Knox counter which will get triggered if I try to root or do anything like it
And it will void My warenty
So How will I reset my Knox counter after I riot??:crying:
Click to expand...
Click to collapse
You cannot reset the Knox counter. Once your device is rooted it "trips" the Knox counter.
But in s5 it's possible to reset Knox. But is it possible for j7 ??
Still not so virgin as I thouht is was. Samsung health is not working, security issu and KNOX can not be used, same issu. Is this because I had in the past installed dm-verivy cript on it?
Samsung Health is nagging about a rooted phone but it is not rooted anymore???
Does anyone know what this is?
The best way is to reflash with Odin. Factory reset it's not so clean as you think. A clean ROM install, is made via Odin. That will clear root for sure, but if you had a custom recovery, it will not hide Knox 0x1, but all the bugs will be gone.
I did a clean install via Odin. And oké the knox 0x1 is standing but nothing more. Did It now for three times but still samsung health not working and knox app the same. Is it the 0x1 that is doing this??? I dont get it.
This is recent that samsung health is not working because with my rooted S8 is samsung health also not working.
master64nl said:
I did a clean install via Odin. And oké the knox 0x1 is standing but nothing more. Did It now for three times but still samsung health not working and knox app the same. Is it the 0x1 that is doing this??? I dont get it.
This is recent that samsung health is not working because with my rooted S8 is samsung health also not working.
Click to expand...
Click to collapse
This is why you read and do research before flashing things
Yes, it's because you tripped KNOX
Some apps depend on Knox being 0x0. If your Knox is 0x1, those apps will misbevahe, or not work at all.
Many people root to remove apps like Samsung Health, which they consider bloatware.
What is the main purpose for rooting, in your case?
Installing a custom ROM?
The Phone was rooted but I have a new S8 so my Phone is going to my wife. For her is a rooted telephone not needed. That`s why I made the phone stock.
Sometimes a factory reset is needed after a clean flash.
And you made it almost stock. As you can see, Knox being 0x1 can cause problems, like Samsung Pay not working, and lots of other apps.
It is not that hard. Paling Wit hour bank is bitter thans Samsung pay. Ifsamsun health is not werking, I install snotter app ?
I hope your wife feels the same way, about secure banking transactions.
Hey,
I tried some custom kernels but only Magisk make success fake knox 0x0.
I read that apps like Samsung Pay can easy recognise Magisk.
For now i have now only Magisk installed but Samsung Pay wont work.
Is possible to add to Stock Oreo ROM fake knox 0x0 without Magisk?
In resultat to have "Original STOCK ROM like before knox triped"
RE: Reset knox
Please note that there isn't a solid solution yet to reset knox. The best way is to change the motherboard or buy a new device instead. Since from Samsung Galaxy S5, samsung started influencing e-fuse technology to knox implement, knox reset isn't possible at all .
And you can find knox faked samsung firmware for your device in XDA. But even thou, you couldn't able to fake or make use on Samsung pay and Samsung pass. Those applications will verify both device status ( Custom binary or root privileges ) and knox status.
Hope this helps :laugh:
Device status is easy to make Oficial by changing sysscope, only fake knox is difficulter because of Magisk it is with root.
I wanted to try make full stock with only knox mod without root ;]
Wirusx said:
Device status is easy to make Oficial by changing sysscope, only fake knox is difficulter because of Magisk it is with root.
I wanted to try make full stock with only knox mod without root ;]
Click to expand...
Click to collapse
You can't do it at all. The only way is to fake knox status by a custom kernel or modify the original kernel instead. But it's hard to modify / fake the original kernel to show knox 0x0. Because it has been encrypted and verify the original binary value in each boot. But you can give it a try..
Hi to all
I was try Knox Manage as a trail period
After setup my Samsung a3 (2016) with my Knox account , i have delete it tru my Knox account
But still knox manage is on my phone and prevent my to do a factory reset
also the it policies has some restrictions, so i can,t almost do nothing with my phone
Hope can get some help here