I have multirom installed on my shield tablet, with TWRP and a 5.1.1 internal stock rom. I have linux4tegra installed as a secondairy rom, and it works fine. However, when i try to install ANY 4.4.X roms (even the 4.4 stock nvidia rom) it either reboots, or freezes at boot. Any suggestions?
Ulincsys said:
I have multirom installed on my shield tablet, with TWRP and a 5.1.1 internal stock rom. I have linux4tegra installed as a secondairy rom, and it works fine. However, when i try to install ANY 4.4.X roms (even the 4.4 stock nvidia rom) it either reboots, or freezes at boot. Any suggestions?
Click to expand...
Click to collapse
How did you? Downloaded the app and said it was unsupported....nvm got it installed finally. Just having trouble installing additional roms
Related
I am perplexed:
I had previously installed many custom roms after updating to stock kitkat, including CM 11. However, I am not able instally cyanogenmod, AT ALL. I have gone through all the steps and all the recoveries, CWM & TWRP all versions. After the installation, the phone hangs on the boot logo, always.
Any clue would be appreciated. Thank you.
U sure u flashed/fastbooted the recommended kernel correctly and did a full wipe before installing the Rom?
Sent from my MT25i
I highly doubt you installed CM11 with the KitKat kernel installed. It won't work. The only way it would work is to FXZ back to JB and then install the previous version of CWM or TWRP.
Currently, there are no ROMs working with the KitKat versions of CM11 or TWRP, although dhacker is working on a new CM11 using the latest KK kernel for the RAZR HD phones and the developer for the Nexesque ROM is also working on an updated version that uses the KitKat kernel as well.
iBolski said:
I highly doubt you installed CM11 with the KitKat kernel installed. It won't work. The only way it would work is to FXZ back to JB and then install the previous version of CWM or TWRP.
Currently, there are no ROMs working with the KitKat versions of CM11 or TWRP, although dhacker is working on a new CM11 using the latest KK kernel for the RAZR HD phones and the developer for the Nexesque ROM is also working on an updated version that uses the KitKat kernel as well.
Click to expand...
Click to collapse
It was very strange situation. I ended up getting CM to work by using CWM 6.0.4.4. FMI (for my information), I need to use CWM 6.0.4.4 will be needed to install custom roms.
Thanks for the advice..
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Sounds like you flashed the wrong recovery, possible that you installed the p3100 recovery.
Try reflashing the recovery.
miksol said:
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Click to expand...
Click to collapse
Flashing KK ROMs on outdated recovery will get you a status 7 error. Grab the latest (I'd go with TWRP as CWM support will be ending soon) version from here...http://forum.xda-developers.com/showthread.php?t=2548257 update to the latest one you like (CWM is 6.0.5.0) Load up a ROM and give it a go. I put all my ROMs on an external card to be safe. Maybe do that and then just install from such.
p,s. CM installer never works, I dont think our tabs are compatible with it. At least I've never got it to work.But, you dont need it anyways.
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
kidstretch said:
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
JeffDC said:
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
Click to expand...
Click to collapse
Yes I can, managed to install MIUI only, latest version.
I also installed Multirom again (on MIUI) and it downloaded cm11s kernel).
Ok managed to go back to my old miui os, now I have 2 miui os and no cm11, also downloaded the Franco kernel 30. How can i check if the cm11 that i had before is still there, if not how can i install it again without screwing my already working miui?
update:
After some tests, this is what's happening.
I believe I have no CM11S on my phone, that is gone!
I have the MIUI V5 running, but when i flash the franco kernel, the phone is stuck on boot (1+1 logo), i have to flash the kernel_kexec_bacon_cm11s to make it boot in MIUI (working).
So, now i have a working rom that works through Mutlirom and I cannot flash a working CM11S rom on the phone.
Any help would be great guys!
I upgraded my D800 to lollipop, I'm rooted on the stock Rom with the stock kernel and twrp recovery installed. I've tried to install viper4android and it installs the drivers but makes no difference in sound. So.. How do I install it properly?
Andrew x3 said:
I upgraded my D800 to lollipop, I'm rooted on the stock Rom with the stock kernel and twrp recovery installed. I've tried to install viper4android and it installs the drivers but makes no difference in sound. So.. How do I install it properly?
Click to expand...
Click to collapse
Go to http://vipersaudio.com/blog/?page_id=48 and install the closet to your firmware. Im guessing you have 5.0.2 Lollipop firmware so better do "FX version v2.3.4.0 (Android 2.3~5.0)"
So I've been trying to update my Shield LTE ROW since this Friday from the stock based rom LL (version 3.1.1) to the MM-based rom (version 4.2) and spend a dozen of hours failing to update :crying:
When I install a MM-based rom the shield boots and the nvidia logo shows a few seconds and then the screen goes black. When the tablet is attached to my pc I noticed that the tablet is not turned off but booted in APX-mode.
These are the things I've tried:
Installing the recovery image 4.2 (fails)
Installing the recovery image 4.1 (fails)
Installing the recovery image 4.0.1 (fails)
Installing the recovery image 3.1.1 (works)
Installing several full and incremental OTA updates to 4.x (fails)
Installing CM 13.0 (fails)
Installing carbon 5.1.1 (works)
Followed the guides mentioned in topics: http://forum.xda-developers.com/shield-tablet/help/unable-to-update-to-marshmallow-rom-t3444124 and http://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541 (fails)
I've tried a lot of things, but now I'm out of ideas.
Has anyone a explanation why MM-based roms don't want to boot on my tablet? And has the knowledge to fix this?
All feedback is welcome and appreciated.
You are currently able to flash and boot with 3.1.1 or stuck in apx mode?
I'm able to flash and boot with 3.1.1. Only MM-based roms are stuck in apx mode when booting.
You are probably on the Lollipop boatloader still. With that bootloader MM based roms don't work. Flash the latest stock from here, root it with cf-autoroot, flash twrp and MM based roms should work.
Thanks for your advice, I'll try it this weekend.
Just a quick question, why do I need to root and flash twrp? Shouldn't it work if I only flash the latest stock?